Merge branch 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes

two outstanding exynos fixes
* 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
  drm/exynos: release unhandled page flip events at postclose.
  drm/exynos: Fix trivial typo in exynos_drm_fimd.c

drm/tegra: Fixes for v3.13-rc3

This assortment of patches fix a few build and sparse warnings and make
sure to always return -EFAULT on copy_from_user() failures. Finally the
upcasting from struct drm_crtc to struct tegra_dc is made safer to
prevent potential segmentation faults.

* tag 'drm/for-3.13-rc3' of git://anongit.freedesktop.org/tegra/linux:
  drm/tegra: return -EFAULT if copy_from_user() fails
  gpu: host1x: Fix a few sparse warnings
  drm/tegra: Force cast to __iomem to make sparse happy
  drm/tegra: Make tegra_drm_driver static
  drm/tegra: Fix address space mismatches
  drm/tegra: Tightly bind RGB output to DC
  drm/tegra: Make CRTC upcasting safer
  gpu: host1x: Silence a few warnings with LPAE=y

5dc9e1e8 was a bit over-ambitious, and accidentially removed handling
for imported prime buffers.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes

Fix some pageflip, oopses and some better clock support for some chipsets

* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
  drm/nv50/disp: min/max are reversed in nv50_crtc_gamma_set()
  drm/nouveau/sw: fix oops if gpu has its display block disabled
  drm/nouveau: unreference fence after syncing
  drm/nouveau/kms: send timestamp data for correct head in flip completion events
  drm/nouveau/clk: Add support for NVAA/NVAC
  drm/nouveau/fifo: Hook up pause and resume for NV50 and NV84+
  drm/nv10/plane: some chipsets don't support NV12
  drm/nv10/plane: add downscaling restrictions
  drm/nv10/plane: fix format computation
  drm/nv04-nv30/clk: provide an empty domain list

A couple of fixes. The biggest thing is the DMA buffer accounting that was
incorrect.

* 'vmwgfx-fixes-3.13' of git://people.freedesktop.org/~thomash/linux:
  drm/vmwgfx: Add our connectors to sysfs
  drm/vmwgfx: Fix dma buffer memory size accounting
  drm/vmwgfx: Fix up and comment the dumb buffer implementation
  drm/vmwgfx: Correctly set the enabled state on crtcs

Some user-space apps expects to find them there.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>

Also request kernel ttm_buffer objects for buffer objects that obviously
aren't visible to user-space, and save some device address space.

The accounting was broken in a couple of ways:
1) We did not differentiate between user dma buffers and kernel dma buffers.
2) The ttm_bo_acc_size function is broken in that it
a) Doesn't take into account the size of the optional dma address array,
b) Doesn't take into account the fact that drivers typically embed the
ttm_tt structure.

This needs to be fixed in ttm, but meanwhile provide a vmwgfx-specific
function to do the job.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>

Allocation was duplicating code. Comments were missing.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>

Failure to do this would make the drm_mode_get_crtc ioctl return
without crtc mode info, indicating that no mode was set.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>

Pull GPIO fixes from Linus Walleij:
 "Here are a few more GPIO patches, we're a bit noisy for being the GPIO
  subsystem, mostly due to the new descriptor API, but all is getting
  into shape.

   - Fix compile warnings

   - Fix overly talkative diagnostic messages from usual use cases wrt
     GPIO descriptors

   - Add a documentation 00-INDEX

   - Use platform GPIOs as fallback when ACPI or device tree is used as
     the primary means to get GPIO lines

   - A bug fix for the MPC8572/MPC8536 fixing erroneous input data"

* tag 'gpio-v3.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpiolib: change a warning to debug message when failing to get gpio
  powerpc/gpio: Fix the wrong GPIO input data on MPC8572/MPC8536
  gpiolib: use platform GPIO mappings as fallback
  Documentation: gpiolib: add 00-INDEX file
  gpiolib: fix lookup of platform-mapped GPIOs
  gpiolib: add missing declarations

Pull ARM SoC fixes from Olof Johansson:
 "Another batch of fixes for ARM SoCs for 3.13.  The diffstat is large,
  mostly because of:

   - Another set of fixes to fix regressions caused by moving OMAP from
     board files to DT.  Tony thinks this was the last major set of
     fixes, with maybe just a few small patches to follow.
   - More fixes for Marvell platforms, most dealing with misdescribed
     PCIe hardware, i.e.  incorrect number of busses on some SoCs, etc.
     The line delta adds up due to various ranges moving around when
     this is fixed.

  But there's also:

   - Some smaller tweaks to defconfigs to make more boards bootable in
     my test setup for better coverage.
   - There are also a few other smaller fixes, a short series for at91,
     a couple of reverts for ux500, etc"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits)
  arm: dts: socfpga: Change some clocks of gate-clk type to perip-clk
  arm: socfpga: Enable ARM_TWD for socfpga
  ARM: multi_v7_defconfig: enable SDHCI_BCM_KONA and MMC_BLOCK_MINORS=16
  ARM: sunxi_defconfig: enable NFS, TMPFS, PRINTK_TIME and nfsroot support
  ARM: multi_v7_defconfig: enable network for BeagleBone Black
  ARM: dts: Fix the name of supplies for smsc911x shared by OMAP
  ARM: OMAP2+: Powerdomain: Fix unchecked dereference of arch_pwrdm
  ARM: dts: omap3-beagle: Add omap-twl4030 audio support
  ARM: dts: omap4-sdp: Fix pin muxing for wl12xx
  ARM: dts: omap4-panda-common: Fix pin muxing for wl12xx
  ARM: at91: fixed unresolved symbol "at91_pm_set_standby" when built without CONFIG_PM
  ARM: at91: add usart3 alias to dtsi
  ARM: at91: sama5d3: reduce TWI internal clock frequency
  mmc: omap: Fix I2C dependency and make driver usable with device tree
  mmc: omap: Fix DMA configuration to not rely on device id
  ARM: dts: omap3-beagle: Fix USB host on beagle boards (for 3.13)
  ARM: dts: omap3-igep0020: name twl4030 VPLL2 regulator as vdds_dsi
  ARM: dts: AM33XX IGEP0033: add USB support
  ARM: dts: AM33XX BASE0033: add 32KBit EEPROM support
  ARM: dts: AM33XX BASE0033: add pinmux and user led support
  ...

Pull parsic updates from Helge Deller:
 - a fix for the mmap(MAP_FIXED|MAP_SHARED) syscall to the same address
   which was already given in a previous call (fixes locale-gen on
   debian)
 - change the memory layout of the kernel to avoid the need for the
   -mlong-calls compiler option (depends on commit 5ecbe3c3 -
   "kernel/extable: fix address-checks for core_kernel and init areas")
 - defconfig updates, e.g.  use the SIL680 driver instead of the SIIMAGE
   driver
 - add more parisc machine names to the machine database

* 'parisc-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: update 64bit defconfigs and use SIL680 instead of SIIMAGE driver
  parisc: remove CONFIG_MLONGCALLS=y from defconfigs
  parisc: fix kernel memory layout in vmlinux.ld.S
  parisc: use kernel_text_address() in unwind functions
  parisc: remove empty SERIAL_PORT_DFNS in serial.h
  parisc: add some more machine names to hardware database
  parisc: fix mmap(MAP_FIXED|MAP_SHARED) to already mmapped address

Pull squashfs bugfix from Phillip Lougher:
 "Just a single bug fix to the new "directly decompress into the page
  cache" code"

* tag 'squashfs-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-next:
  Squashfs: fix failure to unlock pages on decompress error

Pull crypto fixes from Herbert Xu:
 "This push fixes a number of crashes triggered by a previous crypto
  self-test update.  It also fixes a build problem in the caam driver,
  as well as a concurrency issue in s390.

  Finally there is a pair of fixes to bugs in the crypto scatterwalk
  code and authenc that may lead to crashes"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: testmgr - fix sglen in test_aead for case 'dst != src'
  crypto: talitos - fix aead sglen for case 'dst != src'
  crypto: caam - fix aead sglen for case 'dst != src'
  crypto: ccm - Fix handling of zero plaintext when computing mac
  crypto: s390 - Fix aes-xts parameter corruption
  crypto: talitos - corrrectly handle zero-length assoc data
  crypto: scatterwalk - Set the chain pointer indication bit
  crypto: authenc - Find proper IV address in ablkcipher callback
  crypto: caam - Add missing Job Ring include

Pull timer fixes from Thomas Gleixner:

 - timekeeping: Cure a subtle drift issue on GENERIC_TIME_VSYSCALL_OLD

 - nohz: Make CONFIG_NO_HZ=n and nohz=off command line option behave the
   same way.  Fixes a long standing load accounting wreckage.

 - clocksource/ARM: Kconfig update to avoid ARM=n wreckage

 - clocksource/ARM: Fixlets for the AT91 and SH clocksource/clockevents

 - Trivial documentation update and kzalloc conversion from akpms pile

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  nohz: Fix another inconsistency between CONFIG_NO_HZ=n and nohz=off
  time: Fix 1ns/tick drift w/ GENERIC_TIME_VSYSCALL_OLD
  clocksource: arm_arch_timer: Hide eventstream Kconfig on non-ARM
  clocksource: sh_tmu: Add clk_prepare/unprepare support
  clocksource: sh_tmu: Release clock when sh_tmu_register() fails
  clocksource: sh_mtu2: Add clk_prepare/unprepare support
  clocksource: sh_mtu2: Release clock when sh_mtu2_register() fails
  ARM: at91: rm9200: switch back to clockevents_config_and_register
  tick: Document tick_do_timer_cpu
  timer: Convert kmalloc_node(...GFP_ZERO...) to kzalloc_node(...)
  NOHZ: Check for nohz active instead of nohz enabled

Signed-off-by: Helge Deller <deller@gmx.de>

Some of the clocks that were designated gate-clk do not have a gate, so
change those clocks to be of periph-clk type.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Update Kconfig to enable TWD.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Reviewed-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Olof Johansson <olof@lixom.net>

Enable MMC/SD on the Broadcom mobile platforms, and increase the block
minors from the default 8 to 16 (since the Broadcom board by default
has root on the 8th partition).
Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: stable@vger.kernel.org # v3.12

This enables a few more options on the sunxi defconfigs such that I can
use nfsroot to boot them (there is no local storage support yet). It
also enables PRINTK_TIME and tmpfs since it's a common distro requirement.
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v3.13/more-dt-regressions' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

From Tony Lindgren:

Few more legacy booting vs device tree booting fixes that people
have noticed while booting things with device tree for things like
omap4 WLAN, smsc911x, and beagle audio. Hopefully this will be it
for the legacy booting vs device tree fixes for this -rc cycle.

* tag 'omap-for-v3.13/more-dt-regressions' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: Fix the name of supplies for smsc911x shared by OMAP
  ARM: OMAP2+: Powerdomain: Fix unchecked dereference of arch_pwrdm
  ARM: dts: omap3-beagle: Add omap-twl4030 audio support
  ARM: dts: omap4-sdp: Fix pin muxing for wl12xx
  ARM: dts: omap4-panda-common: Fix pin muxing for wl12xx

BeagleBone Black uses the TI CPSW ethernet controller, enable it in the
multi_v7_defconfig for testing coverage purposes.
Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Tony Lindgren <tony@atomide.com>
Cc: stable@vger.kernel.org # v3.12

From Nicolas Ferre:
AT91: second round of fixes for 3.13
- reduce IP frequency for I2C on sama5d3
- missing aliases directive for USART3 on 9x5 family
- a PM symbol is missing if !CONFIG_PM

* tag 'at91-fixes' of git://github.com/at91linux/linux-at91:
  ARM: at91: fixed unresolved symbol "at91_pm_set_standby" when built without CONFIG_PM
  ARM: at91: add usart3 alias to dtsi
  ARM: at91: sama5d3: reduce TWI internal clock frequency

From Jason Cooper, mvebu DT fixes for v3.13:
 - mvebu
    - PCIe fixes now that we have test devices with more ports.
    - fix access to coherency registers

* tag 'mvebu-dt-fixes-3.13' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: re-enable PCIe on Armada 370 DB
  ARM: mvebu: use the virtual CPU registers to access coherency registers
  ARM: mvebu: fix second and third PCIe unit of Armada XP mv78260
  ARM: mvebu: second PCIe unit of Armada XP mv78230 is only x1 capable

Merge tag 'omap-for-v3.13/fixes-against-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

From Tony Lindgren:

Some omap related fixes that have come up with people moving to device
tree only based booting for omap2+.

The series contains a handful of fixes for the igep boards as they were
one of the first omap3 boards to jump over completely to device tree
based booting. So these can be considered regressions compared to
booting igep in legacy mode with board files in v3.12.

Also included are few other device tree vs legacy booting regressions:

- yet more missing omap3 .dtsi entries that have showed up booting
  various boards with device tree only

- n900 eMMC device tree fix

- fixes for beagle USB EHCI

- two fixes to make omap2420 MMC work

As we're moving omap2+ to be device tree only for v3.14, I'd like to
have v3.13 work equally well for legacy based booting and device tree
based booting. So there will be likely few more device tree related
booting patches trickling in.

This series also includes a regression fix for the omap timer posted
mode that may wrongly stay on from the bootloader for some SoCs.

* tag 'omap-for-v3.13/fixes-against-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  mmc: omap: Fix I2C dependency and make driver usable with device tree
  mmc: omap: Fix DMA configuration to not rely on device id
  ARM: dts: omap3-beagle: Fix USB host on beagle boards (for 3.13)
  ARM: dts: omap3-igep0020: name twl4030 VPLL2 regulator as vdds_dsi
  ARM: dts: AM33XX IGEP0033: add USB support
  ARM: dts: AM33XX BASE0033: add 32KBit EEPROM support
  ARM: dts: AM33XX BASE0033: add pinmux and user led support
  ARM: dts: AM33XX BASE0033: add pinmux and hdmi node to enable display
  ARM: dts: omap3-igep0020: Add pinmuxing for DVI output
  ARM: dts: omap3-igep0020: Add pinmux setup for i2c devices
  ARM: dts: omap3-igep: Update to use the TI AM/DM37x processor
  ARM: dts: omap3-igep: Add support for LBEE1USJYC WiFi connected to SDIO
  ARM: dts: omap3-igep: Fix bus-width for mmc1
  ARM: OMAP2+: dss-common: change IGEP's DVI DDC i2c bus
  ARM: OMAP2+: Disable POSTED mode for errata i103 and i767
  ARM: OMAP2+: Fix eMMC on n900 with device tree
  ARM: OMAP2+: Add fixed regulator to omap2plus_defconfig
  ARM: OMAP2+: Fix more missing data for omap3.dtsi file
Signed-off-by: Olof Johansson <olof@lixom.net>

We should be taking the minimum here instead of the max.  It could lead
to a buffer overflow.

Fixes: 438d99e3 ('drm/nvd0/disp: initial crtc object implementation')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>

a/drm/nv50_display.c b/drm/nv50_display.c
index f8e66c08b11a..4e384a2f99c3 100644

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Otherwise none of the format checks pass, since the width was still in
16.16 encoding.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Reported-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

It's the drivers responsibility to react on failure to get
the gpio descriptors and not the frameworks. Since there are
some common peripherals that may or may not have certain
pins connected to gpio lines, depending on the platform,
printing the warning there may end up generating useless bug
reports.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

For MPC8572/MPC8536, the status of GPIOs defined as output
cannot be determined by reading GPDAT register, so the code
use shadow data register instead. But the code may give the
wrong status of GPIOs defined as input under some scenarios:

1. If some pins were configured as inputs and were asserted
high before booting the kernel, the shadow data has been
initialized with those pin values.
2. Some pins have been configured as output first and have
been set to the high value, then reconfigured as input.

The above cases will make the shadow data for those input
pins to be set to high. Then reading the pin status will
always return high even if the actual pin status is low.

The code should eliminate the effects of the shadow data to
the input pins, and the status of those pins should be
read directly from GPDAT.

Cc: stable@vger.kernel.org
Acked-by: Scott Wood <scottwood@freescale.com>
Acked-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Liu Gang <Gang.Liu@freescale.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

For platforms that use device tree or ACPI as the standard way to look
GPIOs up, allow the platform-defined GPIO mappings to be used as a
fallback. This may be useful for platforms that need extra GPIOs mappings
not defined by the firmware.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Give a short overview of the various GPIO documentation files.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

A typo resulted in GPIO lookup failing unconditionally.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reported-by: Stephen Warren <swarren@wwwdotorg.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>