add braces around if statment to fix the checkpatch issue, braces {}
should be used on all arms of this statement.
Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Using const reduces data size.

$ size drivers/staging/fbtft/built-in.o*
   text	   data	    bss	    dec	    hex	filename
  89909	  41584	   2928	 134421	  20d15	drivers/staging/fbtft/built-in.o.new
  88053	  43392	   2928	 134373	  20ce5	drivers/staging/fbtft/built-in.o.old
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This allows making some of the actual arrays const.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Running make C=1 M=drivers/staging/fbtft reports warnings about conversion
from __be16 to unsigned short. Change the type of the variables being
assigned into __be16 to remove those warnings.
Signed-off-by: Anthony Brandon <anthony@amarulasolutions.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

__be16 type variables should be used with return value of macro
cpu_to_be16()
Signed-off-by: Julián de Gortari <kiototeko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove blank line before closing brace to fix the checkpatch
issue blank lines aren't necessary before a close brace '}'.
Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Indent code to match alignment with open parentheses, to
fix the checkpatch issue alignment should match open parenthesis.
Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Return value of strlcpy() is not checked. Name string is silently
truncated if longer that SPI_NAME_SIZE, whilst not detrimental to
the program logic it would be nice to notify the user. Module is
currently quite verbose, adding extra pr_warn() calls will not overly
impact this verbosity.

Check return value from call to strlcpy(). If source string is
truncated call pr_warn() to notify user.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Current call to strncmp() uses a magic number. There is a compile
time constant defined for this buffer, included and used already at
other sites in the file.

Remove magic number. Replace with pre-existing compile time constant.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Module copies a user supplied string (module parameter) into a buffer
using strncpy() and does not check that the buffer is null terminated.

Replace call to strncpy() with call to strlcpy() ensuring that the
buffer is null terminated.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed initialisation of a varible if it is immediately reassigned.

Changes were made using Coccinelle.

@@
type T;
constant C;
expression e;
identifier i;
@@
T i
- = C
;
i = e;
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The icmp6_checksum was returning an invalid data type as the expected type
is __sum16. For returning such data type, icmp6_checksum, now, is using
the kernel functions for computing the checksum.

Here, the sparse message:

drivers/staging/gdm724x/gdm_lte.c:311:39: warning: incorrect type in assignment (different base types)
drivers/staging/gdm724x/gdm_lte.c:311:39:    expected restricted __sum16 [addressable] [assigned] [usertype] icmp6_cksum
drivers/staging/gdm724x/gdm_lte.c:311:39:    got int
Signed-off-by: Javier Rodriguez <jrodbar@yahoo.es>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch warning "Avoid multiple line dereference"
using a pointer variable to avoid line wrap.
Signed-off-by: Cheah Kok Cheong <thrust73@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) /(d)).
It clarifies the divisor calculations. This occurence was detected using
the coccinelle script:

@@
expression e1;
expression e2;
@@
(
- ((e1) + e2 - 1) / (e2)
+ DIV_ROUND_UP(e1,e2)
|
- ((e1) + (e2 - 1)) / (e2)
+ DIV_ROUND_UP(e1,e2)
)
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Checkpatch emits WARNING: Block comments use a trailing */ on a
separate line. Offending comments are commenting variables within
the main data structure of s626 driver. We can move these comments
to kernel doc format with the benefit of clearing the warning and
improving the documentation for the driver.

Remove comments on structure members. Add original comments to the
head of the structure definition in kernel doc format.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The "jr3_pci" driver currently uses the `iobase` member of its private
device data `struct jr3_pci_dev_private` to store a pointer to its
ioremapped register region.  Use the `mmio` member of the `struct
comedi_device` to store this instead, and remove the `iobase` member.
The `iobase` member was of type `struct jr3_t __iomem *`, with the
board's complicated register layout described by `struct jr3_t`.  The
`mmio` member is a generic `void __iomem *`, so its value needs
converting to a `struct jr3_t __iomem *` for our purposes.

Change the clean-up in `jr3_pci_detach()` to call `comedi_pci_detach()`
instead of `comedi_pci_disable()`, as that will iounmap `dev->mmio` for
us.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Local function `set_transforms` has a parameter of type `struct
jr3_pci_transform`.  This has a size 32 bytes, which is quite large for
passing around in a function call.  Change it to use type `const struct
jr3_pci_transform *`.  (In practice, it is probably inlined by the
compiler anyway, but doing this seems to save a few bytes.)
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The `range` member of `struct jr3_pci_subdev_private` is an array of a
tag-less `struct` type whose layout is similar to `struct
comedi_lrange`.  Both `struct` types end with a member also called
`range`.  In the case of tag-less `struct` type, it is a single `struct
comedi_krange`.  In the case of `struct comedi_lrange`, it is a flexible
array of `struct comedi_krange`.

Elements of the `range` array member in `struct jr3_pci_subdev_private`
are pointed to by elements of the `range_table_list` array member, which
are of type `const struct comedi_lrange *`.  This requires some dodgy
type casting.

To avoid the dodgy type casting, change the element type of the `range`
member of `struct jr3_pci_subdev_private` to be a new type `union
jr3_pci_single_range`.  This contains a member `l` of type `struct
comedi_lrange`, and an array member `_reserved` that is large enough to
encompass the `struct comedi_lrange` plus a single `struct
comedi_krange`.  It is the same size as the previous type.  Accesses to
`spriv->range[i].length` and `spriv->range[i].range` are replaced with
`spriv->range[i].l.length` and `spriv->range[i].l.range[0]` respectively
(where `spriv` is a `struct jr3_pci_subdev_private *`, and `i` is an
array index).  Type-casted pointers to `spriv->range[i]` are replaced
with pointers to `spriv->range[i].l`, which do not require the type
casts.  Since we defined a new type, we can define local variables of
the corresponding pointer type to shorten some lines of code.  This is
made use of in `jr3_pci_alloc_spriv()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The type of the `state` member of `struct jr3_pci_subdev_private` is
defined in-situ as an enumerated type without a tag.  For aesthetic
reasons, define the type as `enum jr3_pci_poll_state` outside the
containing `struct`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The `next_time_max` member of `struct jr3_pci_subdev_private` is
assigned to, but never read.  Remove it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If `jr3_pci_auto_attach()` returns with no error, we can now be sure
that the COMEDI subdevice private data structures have been allocated.
Remove the tests for a valid pointer to the private data structure in
`jr3_pci_ai_insn_read()`, `jr3_pci_open()`, and
`jr3_pci_poll_subdevice()`, since they will not be called if the pointer
is invalid.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If debug messages are enabled, the card initialization done in
`jr3_pci_auto_attach()` spits out 24 (0x18) debug messages to show the
null-terminated copyright string embedded in the firmware, one character
at a time, including the ASCII NUL characters at the end.  Factor out
the copyright display into a new function `jr3_pci_show_copyright()` and
re-work it to copy the whole copyright string into a buffer, so that it
can be shown with a single debug message.

Incidentally, this also removes a checkpatch warning "Avoid multiple
line dereference" in the original code.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix three checkpatch warnings of the form:

WARNING: struct comedi_lrange should normally be const
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The various JR3 PCI models have from 1 to 4 DSPs, one per subdevice.
Prior to loading the firmware to all the DSPs, the initialization code
in `jr3_pci_auto_attach()` resets the first DSP.  As far as I can tell,
it should reset all of them.  Change it to do so.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The timer expiry routine `jr3_pci_poll_dev()` checks for expiry by
checking whether the absolute value of `jiffies` (stored in local
variable `now`) is greater than the expected expiry time in jiffy units.
This will fail when `jiffies` wraps around.  Also, it seems to make
sense to handle the expiry one jiffy earlier than the current test.  Use
`time_after_eq()` to check for expiry.

Cc: <stable@vger.kernel.org> # 3.15+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For some reason, the driver does not consider allocation of the
subdevice private data to be a fatal error when attaching the COMEDI
device.  It tests the subdevice private data pointer for validity at
certain points, but omits some crucial tests.  In particular,
`jr3_pci_auto_attach()` calls `jr3_pci_alloc_spriv()` to allocate and
initialize the subdevice private data, but the same function
subsequently dereferences the pointer to access the `next_time_min` and
`next_time_max` members without checking it first.  The other missing
test is in the timer expiry routine `jr3_pci_poll_dev()`, but it will
crash before it gets that far.

Fix the bug by returning `-ENOMEM` from `jr3_pci_auto_attach()` as soon
as one of the calls to `jr3_pci_alloc_spriv()` returns `NULL`.  The
COMEDI core will subsequently call `jr3_pci_detach()` to clean up.

Cc: <stable@vger.kernel.org> # 3.15+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed visorchipset_platform_device and all the unused structures
and functions and using chipset_dev.acpi_device instead.
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sameer Wadgaonkar <sameer.wadgaonkar@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed the character device interface from visorchipset and
removed the major and minor numbers.
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sameer Wadgaonkar <sameer.wadgaonkar@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Added the structure visorchipset_device and moved the globals to
the struct. The visorchipset_init() function saves acpi_device
within this structure.
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sameer Wadgaonkar <sameer.wadgaonkar@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removes kernel-doc formatting for comments that precede static functions.
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removes kernel-doc formatting for comments that precede static functions.
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removes kernel-doc formatting for comment that precedes a static function.
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removes kernel-doc formatting for comments that precede static functions.
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removes kernel-doc formatting for comments that precede static functions.
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removes kernel-doc formatting for comment that precedes a static function.
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes miscellaneous comment issues in visorhba_main.c.
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes a minor spelling mistake in a function comment.
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Moves kernel-doc comment in front of the function it describes.
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull networking fixes from David Miller:

 1) Fix double-free in batman-adv, from Sven Eckelmann.

 2) Fix packet stats for fast-RX path, from Joannes Berg.

 3) Netfilter's ip_route_me_harder() doesn't handle request sockets
    properly, fix from Florian Westphal.

 4) Fix sendmsg deadlock in rxrpc, from David Howells.

 5) Add missing RCU locking to transport hashtable scan, from Xin Long.

 6) Fix potential packet loss in mlxsw driver, from Ido Schimmel.

 7) Fix race in NAPI handling between poll handlers and busy polling,
    from Eric Dumazet.

 8) TX path in vxlan and geneve need proper RCU locking, from Jakub
    Kicinski.

 9) SYN processing in DCCP and TCP need to disable BH, from Eric
    Dumazet.

10) Properly handle net_enable_timestamp() being invoked from IRQ
    context, also from Eric Dumazet.

11) Fix crash on device-tree systems in xgene driver, from Alban Bedel.

12) Do not call sk_free() on a locked socket, from Arnaldo Carvalho de
    Melo.

13) Fix use-after-free in netvsc driver, from Dexuan Cui.

14) Fix max MTU setting in bonding driver, from WANG Cong.

15) xen-netback hash table can be allocated from softirq context, so use
    GFP_ATOMIC. From Anoob Soman.

16) Fix MAC address change bug in bgmac driver, from Hari Vyas.

17) strparser needs to destroy strp_wq on module exit, from WANG Cong.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (69 commits)
  strparser: destroy workqueue on module exit
  sfc: fix IPID endianness in TSOv2
  sfc: avoid max() in array size
  rds: remove unnecessary returned value check
  rxrpc: Fix potential NULL-pointer exception
  nfp: correct DMA direction in XDP DMA sync
  nfp: don't tell FW about the reserved buffer space
  net: ethernet: bgmac: mac address change bug
  net: ethernet: bgmac: init sequence bug
  xen-netback: don't vfree() queues under spinlock
  xen-netback: keep a local pointer for vif in backend_disconnect()
  netfilter: nf_tables: don't call nfnetlink_set_err() if nfnetlink_send() fails
  netfilter: nft_set_rbtree: incorrect assumption on lower interval lookups
  netfilter: nf_conntrack_sip: fix wrong memory initialisation
  can: flexcan: fix typo in comment
  can: usb_8dev: Fix memory leak of priv->cmd_msg_buffer
  can: gs_usb: fix coding style
  can: gs_usb: Don't use stack memory for USB transfers
  ixgbe: Limit use of 2K buffers on architectures with 256B or larger cache lines
  ixgbe: update the rss key on h/w, when ethtool ask for it
  ...