Since we are already using DMA attributes in igb for Rx there is no reason
why we can't also apply DMA_ATTR_WEAK_ORDERING which is needed on some
platforms to improve performance.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Information reported to ethtool about link modes is wrong for 25G NIC.  Fix
it by checking for presence of 25G NIC, checking the link speed reported by
NIC firmware, and then assigning proper values to the
ethtool_link_ksettings struct.
Signed-off-by: Manish Awasthi <manish.awasthi@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Stephen Hemminger says:

====================
netvsc: small changes for net-next

One bugfix, and two non-code patches
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Not used anywhere.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add some short description of how callback's and NAPI interoperate.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change the argument to channel callback from the channel pointer
to the internal data structure containing per-channel info.
This avoids any possible races when callback happens during
initialization and makes IRQ code simpler.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexei Starovoitov says:

====================
bpf: inline bpf_map_lookup_elem()

bpf_map_lookup_elem() is one of the most frequently used helper functions.
Improve JITed program performance by inlining this helper.

bpf_map_type	before  after
hash		58M	74M
array		174M	280M

The values are number of lookups per second in ideal conditions
measured by micro-benchmark in patch 6.

The 'perf report' for HASH map type:
before:
    54.23%  map_perf_test  [kernel.kallsyms]  [k] __htab_map_lookup_elem
    14.24%  map_perf_test  [kernel.kallsyms]  [k] lookup_elem_raw
     8.84%  map_perf_test  [kernel.kallsyms]  [k] htab_map_lookup_elem
     5.93%  map_perf_test  [kernel.kallsyms]  [k] bpf_map_lookup_elem
     2.30%  map_perf_test  [kernel.kallsyms]  [k] bpf_prog_da4fc6a3f41761a2
     1.49%  map_perf_test  [kernel.kallsyms]  [k] kprobe_ftrace_handler

after:
    60.03%  map_perf_test  [kernel.kallsyms]  [k] __htab_map_lookup_elem
    18.07%  map_perf_test  [kernel.kallsyms]  [k] lookup_elem_raw
     2.91%  map_perf_test  [kernel.kallsyms]  [k] bpf_prog_da4fc6a3f41761a2
     1.94%  map_perf_test  [kernel.kallsyms]  [k] _einittext
     1.90%  map_perf_test  [kernel.kallsyms]  [k] __audit_syscall_exit
     1.72%  map_perf_test  [kernel.kallsyms]  [k] kprobe_ftrace_handler

so the cost of htab_map_lookup_elem() and bpf_map_lookup_elem()
is gone after inlining.

'per-cpu' and 'lru' map types can be optimized similarly in the future.

Note the sparse will complain that bpf is addictive ;)
kernel/bpf/hashtab.c:438:19: sparse: subtraction of functions? Share your drugs
kernel/bpf/verifier.c:3342:38: sparse: subtraction of functions? Share your drugs
it's not a new warning, just in new places.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

$ map_perf_test 128
speed of HASH bpf_map_lookup_elem() in lookups per second
	w/o JIT		w/JIT
before	46M		58M
after	42M		74M

perf report
before:
    54.23%  map_perf_test  [kernel.kallsyms]  [k] __htab_map_lookup_elem
    14.24%  map_perf_test  [kernel.kallsyms]  [k] lookup_elem_raw
     8.84%  map_perf_test  [kernel.kallsyms]  [k] htab_map_lookup_elem
     5.93%  map_perf_test  [kernel.kallsyms]  [k] bpf_map_lookup_elem
     2.30%  map_perf_test  [kernel.kallsyms]  [k] bpf_prog_da4fc6a3f41761a2
     1.49%  map_perf_test  [kernel.kallsyms]  [k] kprobe_ftrace_handler

after:
    60.03%  map_perf_test  [kernel.kallsyms]  [k] __htab_map_lookup_elem
    18.07%  map_perf_test  [kernel.kallsyms]  [k] lookup_elem_raw
     2.91%  map_perf_test  [kernel.kallsyms]  [k] bpf_prog_da4fc6a3f41761a2
     1.94%  map_perf_test  [kernel.kallsyms]  [k] _einittext
     1.90%  map_perf_test  [kernel.kallsyms]  [k] __audit_syscall_exit
     1.72%  map_perf_test  [kernel.kallsyms]  [k] kprobe_ftrace_handler

Notice that bpf_map_lookup_elem() and htab_map_lookup_elem() are trivial
functions, yet they take sizeable amount of cpu time.
htab_map_gen_lookup() removes bpf_map_lookup_elem() and converts
htab_map_lookup_elem() into three BPF insns which causing cpu time
for bpf_prog_da4fc6a3f41761a2() slightly increase.

$ map_perf_test 256
speed of ARRAY bpf_map_lookup_elem() in lookups per second
	w/o JIT		w/JIT
before	97M		174M
after	64M		280M

before:
    37.33%  map_perf_test  [kernel.kallsyms]  [k] array_map_lookup_elem
    13.95%  map_perf_test  [kernel.kallsyms]  [k] bpf_map_lookup_elem
     6.54%  map_perf_test  [kernel.kallsyms]  [k] bpf_prog_da4fc6a3f41761a2
     4.57%  map_perf_test  [kernel.kallsyms]  [k] kprobe_ftrace_handler

after:
    32.86%  map_perf_test  [kernel.kallsyms]  [k] bpf_prog_da4fc6a3f41761a2
     6.54%  map_perf_test  [kernel.kallsyms]  [k] kprobe_ftrace_handler

array_map_gen_lookup() removes calls to array_map_lookup_elem()
and bpf_map_lookup_elem() and replaces them with 7 bpf insns.

The performance without JIT is slower, since executing extra insns
in the interpreter is slower than running native C code,
but with JIT the performance gains are obvious,
since native C->x86 code is replaced with fewer bpf->x86 instructions.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Optimize:
bpf_call
  bpf_map_lookup_elem
    map->ops->map_lookup_elem
      htab_map_lookup_elem
        __htab_map_lookup_elem
into:
bpf_call
  __htab_map_lookup_elem

to improve performance of JITed programs.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Optimize bpf_call -> bpf_map_lookup_elem() -> array_map_lookup_elem()
into a sequence of bpf instructions.
When JIT is on the sequence of bpf instructions is the sequence
of native cpu instructions with significantly faster performance
than indirect call and two function's prologue/epilogue.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

convert_ctx_accesses() replaces single bpf instruction with a set of
instructions. Adjust corresponding insn_aux_data while patching.
It's needed to make sure subsequent 'for(all insn)' loops
have matching insn and insn_aux_data.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

reduce indent and make it iterate over instructions similar to
convert_ctx_accesses(). Also convert hard BUG_ON into soft verifier error.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

no functional change.
move fixup_bpf_calls() to verifier.c
it's being refactored in the next patch
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

The tcp_tw_recycle was already broken for connections
behind NAT, since the per-destination timestamp is not
monotonically increasing for multiple machines behind
a single destination address.

After the randomization of TCP timestamp offsets
in commit 8a5bd45f6616 (tcp: randomize tcp timestamp offsets
for each connection), the tcp_tw_recycle is broken for all
types of connections for the same reason: the timestamps
received from a single machine is not monotonically increasing,
anymore.

Remove tcp_tw_recycle, since it is not functional. Also, remove
the PAWSPassive SNMP counter since it is only used for
tcp_tw_recycle, and simplify tcp_v4_route_req and tcp_v6_route_req
since the strict argument is only set when tcp_tw_recycle is
enabled.
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Cc: Lutz Vieweg <lvml@5t9.de>
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 8a5bd45f6616 (tcp: randomize tcp timestamp offsets for each connection)
randomizes TCP timestamps per connection. After this commit,
there is no guarantee that the timestamps received from the
same destination are monotonically increasing. As a result,
the per-destination timestamp cache in TCP metrics (i.e., tcpm_ts
in struct tcp_metrics_block) is broken and cannot be relied upon.

Remove the per-destination timestamp cache and all related code
paths.

Note that this cache was already broken for caching timestamps of
multiple machines behind a NAT sharing the same address.
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Cc: Lutz Vieweg <lvml@5t9.de>
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Shannon Nelson says:

====================
sunvnet: better connection management

These patches remove some problems in handling of carrier state
with the ldmvsw vswitch, remove  an xoff misuse in sunvnet, and
add stats for debug and tracking of point-to-point connections
between the ldom VMs.

v2:
 - added ldmvsw ndo_open to reset the LDC channel
 - updated copyrights
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The sunvnet netdev is connected to the controlling ldom's vswitch
for network bridging.  However, for higher performance between ldoms,
there also is a channel between each client ldom.  These connections are
represented in the sunvnet driver by a queue for each ldom.  The driver
uses select_queue to tell the stack which queue to use by tracking the mac
addresses on the other end of each port.  When a connected ldom shuts down,
the driver receives an LDC_EVENT_RESET and the port is removed from the
driver, thus a queue with no ldom on the other end will never be selected
for Tx.

The driver was trying to reinforce the "don't use this queue" notion with
netif_tx_stop_queue() and netif_tx_wake_queue(), which really should only
be used to signal a Tx queue is full (aka XOFF).  This misuse of queue
state resulted in NETDEV WATCHDOG messages and lots of unnecessary calls
into the driver's tx_timeout handler.  Simply removing these takes care
of the problem.

Orabug: 25190537
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make sure multicast packets get counted in the device.

Orabug: 25190537
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Track our used and unused queue indexies correctly.  Otherwise, as ports
dropped out and returned, they all eventually ended up with the same
queue index.

Orabug: 25190537
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In this driver, there is a "port" created for the connection to each of
the other ldoms; a netdev queue is mapped to each port, and they are
collected under a single netdev.  The generic netdev statistics show
us all the traffic in and out of our network device, but don't show
individual queue/port stats.  This patch breaks out the traffic counts
for the individual ports and gives us a little view into the state of
those connections.

Orabug: 25190537
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When an ldom VM is bound, the network vswitch infrastructure is set up for
it, but was being forced 'UP' by the userland switch configuration script.
When 'UP' but not actually connected to a running VM, the ipv6 neighbor
probes fail (not a horrible thing) and start cluttering up the kernel logs.
Funny thing: these are debug messages that never actually show up, but
we do see the net_ratelimited messages that say N callbacks were
suppressed.

This patch defers the netif_carrier_on() until an actual link has been
established with the VM, as indicated by receiving an LDC_EVENT_UP from
the underlying LDC protocol.  Similarly, we take the link down when we
see the LDC_EVENT_RESET.  Now when we see the ndo_open(), we reset the
link to get things talking again.

Orabug: 25525312
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Cut-n-paste enablement of 802.3ad bonding on 25G NICs, which currently
report 0 as their bandwidth.

CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: netdev@vger.kernel.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

replace comma to semi colons in tcp_westwood_info().
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

All IRQs owned by the PF and VF drivers share the same nondescript name
"octeon"; this makes it difficult to setup interrupt affinity.

Change the IRQ names to reflect their specific purpose:

    LiquidIO<id>-<func>-<type>-<queue pair num>

Examples:
    LiquidIO0-pf0-rxtx-3
    LiquidIO1-vf1-rxtx-0
    LiquidIO0-pf0-aux

We cannot use netdev->name for naming the IRQs because:

    1.  Early during init, the PF and VF drivers require interrupts to
        send/receive control data from the NIC firmware; so the PF and VF
        must request IRQs long before the netdev struct is registered.

    2.  The IRQ name can only be specified at the time it is requested.
        It cannot be changed after that.
Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: Satanand Burla <satananda.burla@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove invalid call to dma_sync_single_for_cpu() because previous DMA
allocation was coherent--not streaming.  Remove code that references fields
in struct list_head; replace it with calls to list_empty() and
list_first_entry().  Also, add comment to clarify complicated if statement.
Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

I recently reported on the netem list that iperf network benchmarks
show unexpected results when a bandwidth throttling rate has been
configured for netem. Specifically:

1) The measured link bandwidth *increases* when a higher delay is added
2) The measured link bandwidth appears higher than the specified limit
3) The measured link bandwidth for the same very slow settings varies significantly across
  machines

The issue can be reproduced by using tc to configure netem with a
512kbit rate and various (none, 1us, 50ms, 100ms, 200ms) delays on a
veth pair between network namespaces, and then using iperf (or any
other network benchmarking tool) to test throughput. Complete detailed
instructions are in the original email chain here:
https://lists.linuxfoundation.org/pipermail/netem/2017-February/001672.html

There appear to be two underlying bugs causing these effects:

- The first issue causes long delays when the rate is slow and no
  delay is configured (e.g., "rate 512kbit"). This is because SKBs are
  not orphaned when no delay is configured, so orphaning does not
  occur until *after* the rate-induced delay has been applied. For
  this reason, adding a tiny delay (e.g., "rate 512kbit delay 1us")
  dramatically increases the measured bandwidth.

- The second issue is that rate-induced delays are not correctly
  applied, allowing SKB delays to occur in parallel. The indended
  approach is to compute the delay for an SKB and to add this delay to
  the end of the current queue. However, the code does not detect
  existing SKBs in the queue due to improperly testing sch->q.qlen,
  which is nonzero even when packets exist only in the
  rbtree. Consequently, new SKBs do not wait for the current queue to
  empty. When packet delays vary significantly (e.g., if packet sizes
  are different), then this also causes unintended reordering.

I modified the code to expect a delay (and orphan the SKB) when a rate
is configured. I also added some defensive tests that correctly find
the latest scheduled delivery time, even if it is (unexpectedly) for a
packet in sch->q. I have tested these changes on the latest kernel
(4.11.0-rc1+) and the iperf / ping test results are as expected.
Signed-off-by: Nik Unger <njunger@uwaterloo.ca>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Or Gerlitz says:

====================
small set of sched cleanups

Just two cleanups -- but for the 2nd one I think we need ack from
Cong Wang to make sure this isn't actually a bug report..

changes from V1:
  - addressed comment from Sergei to use 12 hex digits etc
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The code introduced by commit 2ccccf5f ("net_sched: update
hierarchical backlog too") only sets prev_backlog in fq_codel_dequeue()
but not using that anywhere, remove that setting.

Cc: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As it's used only on that file.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Allows the BCMA version of the bgmac driver to obtain MAC address
from the device tree.  If no MAC address is specified there, then
the previous behavior (obtaining MAC address from SPROM) is
used.
Signed-off-by: Steve Lin <steven.lin1@broadcom.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

CONFIG_8xx is being deprecated. Since the includes dependent on
CONFIG_8xx are useless, just drop them.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

CONFIG_8xx is deprecated and should soon be removed in favor
of CONFIG_PPC_8xx.
Anyway, hfc_multi_8xx.h only uses 8xx I/O ports which are
linked to the CPM1 communication processor included in the 8xx
rather than the 8xx itself.

This patch therefore makes it dependent on CONFIG_CPM1 instead,
like several other drivers.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add basic support for handling suspend and resume.
Signed-off-by: Jane Li <jiel@marvell.com>
Reviewed-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
mlxsw: Enable VRF offload

Ido says:

Packets received from netdevs enslaved to different VRF devices are
forwarded using different FIB tables. In the Spectrum ASIC this is
achieved by binding different router interfaces (RIFs) to different
virtual routers (VRs). Each RIF represents an enslaved netdev and each
VR has its own FIB table according to which packets are forwarded.

The first three patches add an helper to check if a FIB rule is a
default rule and extend the FIB notification chain to include the rule's
info as part of the RULE_{ADD,DEL} events. This allows offloading
drivers to sanitize the rules they don't support and flush their tables.

The fourth patch introduces a small change in the VRF driver to allow
capable drivers to more easily offload VRFs.

Finally, the last patches gradually add support for VRFs in the mlxsw
driver. First, on top of port netdevs, stacked LAG and VLAN devices and
then on top of bridges.

Some limitations I would like to point out:

1) The old model where 'oif' / 'iif' rules were programmed for each L3
master device isn't supported. Upon insertion of these rules the driver
will flush its tables and forwarding will be done by the kernel instead.
It's inferior in every way to the single 'l3mdev' rule, so this shouldn't
be an issue.

2) Inter-VRF routes pointing to a VRF device aren't offloaded. Packets
hitting these routes will be forwarded by the kernel. Inter-VRF routes
pointing to netdevs enslaved to a different VRF are offloaded.

3) There's a small discrepancy between the kernel's datapath and the
device's. By default, packets forwarded by the kernel first do a lookup
in the local table and then in the VRF's table (assuming no match). In
the device, lookup is done only in the VRF's table, which is probably
the intended behavior. Changes in v2 allow user to properly re-order the
default rules without triggering the abort mechanism.

Changes in v3:
* Remove 'l3mdev' from the matchall list, as it's related to the action
  and not the selector (David Ahern).
* Use container_of() instead of typecasting (David Ahern).
* Add David's Acked-by to the second patch.
* Add an helper in IPv4 code to check if rule is a default rule (David
  Ahern).

Changes in v2:
* Drop default rule indication and allow re-ordering of default rules
  (David Ahern).
* Remove ifdef around 'struct fib_rule_notifier_info' and drop redundant
  dependency on IP_MULTIPLE_TABLES from rocker and mlxsw.
* Add David's Acked-by to the fourth patch.
* Remove netif_is_vrf_master() and use netif_is_l3_master() instead
  (David Ahern).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that port netdevs can be enslaved to a VRF master we need to make
sure the device's routing tables won't be flushed upon the insertion of
a l3mdev rule.

Note that we assume the notified l3mdev rule is a simple rule as used by
the VRF master. We don't check for the presence of other selectors such
as 'iif' and 'oif'.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In a similar fashion to the previous patch, allow bridges and VLAN
devices on top of bridges to be enslaved to a VRF master device.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Allow port netdevs, LAG and VLAN devices stacked on top of these to be
enslaved to a VRF master device.

Upon enslavement, create a router interface (RIF) for the enslaved
netdev and associate it with a virtual router (VR) based on the VRF's
table ID.

If a RIF already exists for the netdev (f.e., due to the existence of an
IP address), then it's deleted and a new one is created with the
appropriate VR binding.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We usually destroy the netdev's router interface (RIF) when the last IP
address is removed from it.

However, we shouldn't do that if it's enslaved to an L3 master device.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a router interface (RIF) is created due to a netdev being enslaved
to a VRF master, then it should be associated with the appropriate
virtual router (VR) and not the default one.

If netdev is a VRF slave, lookup the VR based on the VRF's table ID.
Otherwise default to the MAIN table.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Allow listeners of the subsequent CHANGEUPPER notification to retrieve
the VRF's table ID by calling l3mdev_fib_table() with the slave netdev.
Without this change, the netdev won't be considered an L3 slave and the
function would return 0.

This is consistent with other master device such as bridge and bond that
set the slave's private flag before linking. It also makes
do_vrf_{add,del}_slave() symmetric.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>