- 01 May, 2012 1 commit
-
-
Steve Glendinning authored
This patch fixes the same issue as reported on smsc95xx, where the usb device is connected with no ethernet cable plugged-in. Without this patch sysfs reports the cable as present flag@flag-desktop:~$ cat /sys/class/net/eth0/carrier 1 while it's not: flag@flag-desktop:~$ sudo mii-tool eth0 eth0: no link Signed-off-by:
Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 30 Apr, 2012 8 commits
-
-
Yuchung Cheng authored
When the cwnd reduction is done, ssthresh may be infinite if TCP enters CWR via ECN or F-RTO. If cwnd is not undone, i.e., undo_marker is set, tcp_complete_cwr() falsely set cwnd to the infinite ssthresh value. The correct operation is to keep cwnd intact because it has been updated in ECN or F-RTO. Signed-off-by:
Yuchung Cheng <ycheng@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Jan Seiffert authored
Now the helper function from filter.c for negative offsets is exported, it can be used it in the jit to handle negative offsets. First modify the asm load helper functions to handle: - know positive offsets - know negative offsets - any offset then the compiler can be modified to explicitly use these helper when appropriate. This fixes the case of a negative X register and allows to lift the restriction that bpf programs with negative offsets can't be jited. Tested-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Jan Seiffert <kaffeemonster@googlemail.com> Signed-off-by:
-
Eric Dumazet authored
Denys Fedoryshchenko reported frequent crashes on a proxy server and kindly provided a lockdep report that explains it all : [ 762.903868] [ 762.903880] ================================= [ 762.903890] [ INFO: inconsistent lock state ] [ 762.903903] 3.3.4-build-0061 #8 Not tainted [ 762.904133] --------------------------------- [ 762.904344] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. [ 762.904542] squid/1603 [HC0[0]:SC0[0]:HE1:SE1] takes: [ 762.904542] (key#3){+.?...}, at: [<c0232cc4>] __percpu_counter_sum+0xd/0x58 [ 762.904542] {IN-SOFTIRQ-W} state was registered at: [ 762.904542] [<c0158b84>] __lock_acquire+0x284/0xc26 [ 762.904542] [<c01598e8>] lock_acquire+0x71/0x85 [ 762.904542] [<c0349765>] _raw_spin_lock+0x33/0x40 [ 762.904542] [<c0232c93>] __percpu_counter_add+0x58/0x7c [ 762.904542] [<c02cfde1>] sk_clone_lock+0x1e5/0x200 [ 762.904542] [<c0303ee4>] inet_csk_clone_lock+0xe/0x78 [ 762.904542] [<c0315778>] tcp_create_openreq_child+0x1b/0x404 [ 762.904542] [<c031339c>] tcp_v4_syn_recv_sock+0x32/0x1c1 [ 762.904542] [<c031615a>] tcp_check_req+0x1fd/0x2d7 [ 762.904542] [<c0313f77>] tcp_v4_do_rcv+0xab/0x194 [ 762.904542] [<c03153bb>] tcp_v4_rcv+0x3b3/0x5cc [ 762.904542] [<c02fc0c4>] ip_local_deliver_finish+0x13a/0x1e9 [ 762.904542] [<c02fc539>] NF_HOOK.clone.11+0x46/0x4d [ 762.904542] [<c02fc652>] ip_local_deliver+0x41/0x45 [ 762.904542] [<c02fc4d1>] ip_rcv_finish+0x31a/0x33c [ 762.904542] [<c02fc539>] NF_HOOK.clone.11+0x46/0x4d [ 762.904542] [<c02fc857>] ip_rcv+0x201/0x23e [ 762.904542] [<c02daa3a>] __netif_receive_skb+0x319/0x368 [ 762.904542] [<c02dac07>] netif_receive_skb+0x4e/0x7d [ 762.904542] [<c02dacf6>] napi_skb_finish+0x1e/0x34 [ 762.904542] [<c02db122>] napi_gro_receive+0x20/0x24 [ 762.904542] [<f85d1743>] e1000_receive_skb+0x3f/0x45 [e1000e] [ 762.904542] [<f85d3464>] e1000_clean_rx_irq+0x1f9/0x284 [e1000e] [ 762.904542] [<f85d3926>] e1000_clean+0x62/0x1f4 [e1000e] [ 762.904542] [<c02db228>] net_rx_action+0x90/0x160 [ 762.904542] [<c012a445>] __do_softirq+0x7b/0x118 [ 762.904542] irq event stamp: 156915469 [ 762.904542] hardirqs last enabled at (156915469): [<c019b4f4>] __slab_alloc.clone.58.clone.63+0xc4/0x2de [ 762.904542] hardirqs last disabled at (156915468): [<c019b452>] __slab_alloc.clone.58.clone.63+0x22/0x2de [ 762.904542] softirqs last enabled at (156915466): [<c02ce677>] lock_sock_nested+0x64/0x6c [ 762.904542] softirqs last disabled at (156915464): [<c0349914>] _raw_spin_lock_bh+0xe/0x45 [ 762.904542] [ 762.904542] other info that might help us debug this: [ 762.904542] Possible unsafe locking scenario: [ 762.904542] [ 762.904542] CPU0 [ 762.904542] ---- [ 762.904542] lock(key#3); [ 762.904542] <Interrupt> [ 762.904542] lock(key#3); [ 762.904542] [ 762.904542] *** DEADLOCK *** [ 762.904542] [ 762.904542] 1 lock held by squid/1603: [ 762.904542] #0: (sk_lock-AF_INET){+.+.+.}, at: [<c03055c0>] lock_sock+0xa/0xc [ 762.904542] [ 762.904542] stack backtrace: [ 762.904542] Pid: 1603, comm: squid Not tainted 3.3.4-build-0061 #8 [ 762.904542] Call Trace: [ 762.904542] [<c0347b73>] ? printk+0x18/0x1d [ 762.904542] [<c015873a>] valid_state+0x1f6/0x201 [ 762.904542] [<c0158816>] mark_lock+0xd1/0x1bb [ 762.904542] [<c015876b>] ? mark_lock+0x26/0x1bb [ 762.904542] [<c015805d>] ? check_usage_forwards+0x77/0x77 [ 762.904542] [<c0158bf8>] __lock_acquire+0x2f8/0xc26 [ 762.904542] [<c0159b8e>] ? mark_held_locks+0x5d/0x7b [ 762.904542] [<c0159cf6>] ? trace_hardirqs_on+0xb/0xd [ 762.904542] [<c0158dd4>] ? __lock_acquire+0x4d4/0xc26 [ 762.904542] [<c01598e8>] lock_acquire+0x71/0x85 [ 762.904542] [<c0232cc4>] ? __percpu_counter_sum+0xd/0x58 [ 762.904542] [<c0349765>] _raw_spin_lock+0x33/0x40 [ 762.904542] [<c0232cc4>] ? __percpu_counter_sum+0xd/0x58 [ 762.904542] [<c0232cc4>] __percpu_counter_sum+0xd/0x58 [ 762.904542] [<c02cebc4>] __sk_mem_schedule+0xdd/0x1c7 [ 762.904542] [<c02d178d>] ? __alloc_skb+0x76/0x100 [ 762.904542] [<c0305e8e>] sk_wmem_schedule+0x21/0x2d [ 762.904542] [<c0306370>] sk_stream_alloc_skb+0x42/0xaa [ 762.904542] [<c0306567>] tcp_sendmsg+0x18f/0x68b [ 762.904542] [<c031f3dc>] ? ip_fast_csum+0x30/0x30 [ 762.904542] [<c0320193>] inet_sendmsg+0x53/0x5a [ 762.904542] [<c02cb633>] sock_aio_write+0xd2/0xda [ 762.904542] [<c015876b>] ? mark_lock+0x26/0x1bb [ 762.904542] [<c01a1017>] do_sync_write+0x9f/0xd9 [ 762.904542] [<c01a2111>] ? file_free_rcu+0x2f/0x2f [ 762.904542] [<c01a17a1>] vfs_write+0x8f/0xab [ 762.904542] [<c01a284d>] ? fget_light+0x75/0x7c [ 762.904542] [<c01a1900>] sys_write+0x3d/0x5e [ 762.904542] [<c0349ec9>] syscall_call+0x7/0xb [ 762.904542] [<c0340000>] ? rp_sidt+0x41/0x83 Bug is that sk_sockets_allocated_read_positive() calls percpu_counter_sum_positive() without BH being disabled. This bug was added in commit 180d8cd9 (foundations of per-cgroup memory pressure controlling.), since previous code was using percpu_counter_read_positive() which is IRQ safe. In __sk_mem_schedule() we dont need the precise count of allocated sockets and can revert to previous behavior. Reported-by:Denys Fedoryshchenko <denys@visp.net.lb> Sined-off-by:
Eric Dumazet <edumazet@google.com> Cc: Glauber Costa <glommer@parallels.com> Acked-by:
-
git://1984.lsi.us.es/netDavid S. Miller authored
-
Pablo Neira Ayuso authored
The current checking always succeeded. We have to check the first character of the string to check that it's empty, thus, skipping the timeout path. This fixes the use of the CT target without the timeout option. Signed-off-by:Pablo Neira Ayuso <pablo@netfilter.org>
-
Hans Schillstrom authored
Change order of init so netns init is ready when register ioctl and netlink. Ver2 Whitespace fixes and __init added. Reported-by:
"Ryan O'Hara" <rohara@redhat.com> Signed-off-by:
Hans Schillstrom <hans.schillstrom@ericsson.com> Acked-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
Simon Horman <horms@verge.net.au>
-
Hans Schillstrom authored
ip_vs_create_timeout_table() can return NULL All functions protocol init_netns is affected of this patch. Signed-off-by:
-
Hans Schillstrom authored
Avoid crash when registering shedulers after the IPVS core initialization for netns fails. Do this by checking for present core (net->ipvs). Signed-off-by:
-
- 28 Apr, 2012 2 commits
-
-
Neil Horman authored
Eric Dumazet pointed out to me that the drop_monitor protocol has some holes in its smp protections. Specifically, its possible to replace data->skb while its being written. This patch corrects that by making data->skb an rcu protected variable. That will prevent it from being overwritten while a tracepoint is modifying it. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Reported-by:
Eric Dumazet <eric.dumazet@gmail.com> CC: David Miller <davem@davemloft.net> Acked-by:
-
Neil Horman authored
Eric Dumazet pointed out this warning in the drop_monitor protocol to me: [ 38.352571] BUG: sleeping function called from invalid context at kernel/mutex.c:85 [ 38.352576] in_atomic(): 1, irqs_disabled(): 0, pid: 4415, name: dropwatch [ 38.352580] Pid: 4415, comm: dropwatch Not tainted 3.4.0-rc2+ #71 [ 38.352582] Call Trace: [ 38.352592] [<ffffffff8153aaf0>] ? trace_napi_poll_hit+0xd0/0xd0 [ 38.352599] [<ffffffff81063f2a>] __might_sleep+0xca/0xf0 [ 38.352606] [<ffffffff81655b16>] mutex_lock+0x26/0x50 [ 38.352610] [<ffffffff8153aaf0>] ? trace_napi_poll_hit+0xd0/0xd0 [ 38.352616] [<ffffffff810b72d9>] tracepoint_probe_register+0x29/0x90 [ 38.352621] [<ffffffff8153a585>] set_all_monitor_traces+0x105/0x170 [ 38.352625] [<ffffffff8153a8ca>] net_dm_cmd_trace+0x2a/0x40 [ 38.352630] [<ffffffff8154a81a>] genl_rcv_msg+0x21a/0x2b0 [ 38.352636] [<ffffffff810f8029>] ? zone_statistics+0x99/0xc0 [ 38.352640] [<ffffffff8154a600>] ? genl_rcv+0x30/0x30 [ 38.352645] [<ffffffff8154a059>] netlink_rcv_skb+0xa9/0xd0 [ 38.352649] [<ffffffff8154a5f0>] genl_rcv+0x20/0x30 [ 38.352653] [<ffffffff81549a7e>] netlink_unicast+0x1ae/0x1f0 [ 38.352658] [<ffffffff81549d76>] netlink_sendmsg+0x2b6/0x310 [ 38.352663] [<ffffffff8150824f>] sock_sendmsg+0x10f/0x130 [ 38.352668] [<ffffffff8150abe0>] ? move_addr_to_kernel+0x60/0xb0 [ 38.352673] [<ffffffff81515f04>] ? verify_iovec+0x64/0xe0 [ 38.352677] [<ffffffff81509c46>] __sys_sendmsg+0x386/0x390 [ 38.352682] [<ffffffff810ffaf9>] ? handle_mm_fault+0x139/0x210 [ 38.352687] [<ffffffff8165b5bc>] ? do_page_fault+0x1ec/0x4f0 [ 38.352693] [<ffffffff8106ba4d>] ? set_next_entity+0x9d/0xb0 [ 38.352699] [<ffffffff81310b49>] ? tty_ldisc_deref+0x9/0x10 [ 38.352703] [<ffffffff8106d363>] ? pick_next_task_fair+0x63/0x140 [ 38.352708] [<ffffffff8150b8d4>] sys_sendmsg+0x44/0x80 [ 38.352713] [<ffffffff8165f8e2>] system_call_fastpath+0x16/0x1b It stems from holding a spinlock (trace_state_lock) while attempting to register or unregister tracepoint hooks, making in_atomic() true in this context, leading to the warning when the tracepoint calls might_sleep() while its taking a mutex. Since we only use the trace_state_lock to prevent trace protocol state races, as well as hardware stat list updates on an rcu write side, we can just convert the spinlock to a mutex to avoid this problem. Signed-off-by:
-
- 27 Apr, 2012 1 commit
-
-
Neal Cardwell authored
Clean up a reference to jiffies in tcp_rcv_rtt_measure() that should instead reference tcp_time_stamp. Since the result of the subtraction is passed into a function taking u32, this should not change any behavior (and indeed the generated assembly does not change on x86_64). However, it seems worth cleaning this up for consistency and clarity (and perhaps to avoid bugs if this is copied and pasted somewhere else). Signed-off-by:
-
- 26 Apr, 2012 12 commits
-
-
Vlad Yasevich authored
Update my email address. Signed-off-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
-
Paolo Pisati authored
Without this patch sysfs reports the cable as present flag@flag-desktop:~$ cat /sys/class/net/eth0/carrier 1 while it's not: flag@flag-desktop:~$ sudo mii-tool eth0 eth0: no link Tested on my Beagle XM. v2: added mantainer to the list of recipient Signed-off-by:
Paolo Pisati <paolo.pisati@canonical.com> Acked-by:
-
Jeff Mahoney authored
The dl2k driver's rio_ioctl call has a few issues: - No permissions checking - Implements SIOCGMIIREG and SIOCGMIIREG using the SIOCDEVPRIVATE numbers - Has a few ioctls that may have been used for debugging at one point but have no place in the kernel proper. This patch removes all but the MII ioctls, renumbers them to use the standard ones, and adds the proper permission check for SIOCSMIIREG. We can also get rid of the dl2k-specific struct mii_data in favor of the generic struct mii_ioctl_data. Since we have the phyid on hand, we can add the SIOCGMIIPHY ioctl too. Most of the MII code for the driver could probably be converted to use the generic MII library but I don't have a device to test the results. Reported-by:
Stephan Mueller <stephan.mueller@atsec.com> Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
-
alex.bluesman.smirnov@gmail.com authored
Add missing spin_lock_init() for frames list lock. Signed-off-by:
Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by:
-
alex.bluesman.smirnov@gmail.com authored
Clean all the pending fragments and relative timers if 6lowpan link is going to be deleted. Signed-off-by:
-
alex.bluesman.smirnov@gmail.com authored
Add nescesary mlme callbacks to satisfy "iz list" request from user space. Due to 6lowpan device doesn't have its own phy, mlme implemented as a pipe to a real phy to which 6lowpan is attached. Signed-off-by:
-
-
Thadeu Lima de Souza Cascardo authored
commit a4910b74 has broken promiscuous mode, which is never set. port->promisc just reflects the last setting of PROMISCUOUS mode to avoid doing an extra hypercall when it's already set. However, since it may fail because of hypervisor permissions, we should still respect the multicast settings and not simply exit after setting promiscuous mode. Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Cc: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
There was a bug in the mask of regtype parameter for registering a multicast filter. It was ignoring the scope bit, which was wrongly being used for all filters. The SCOPE_ALL value adds a filter that allows all multicast packets and ignores the MAC parameter, just what allmulticast needs. The normals filters, however, should not use SCOPE_ALL. Signed-off-by:
-
Julian Anastasov authored
Make sure net->ipvs is reset on netns cleanup or failed initialization. It is needed for IPVS applications to know that IPVS core is not loaded in netns. Signed-off-by:
-
Julian Anastasov authored
Avoid crash when registering ip_vs_ftp after the IPVS core initialization for netns fails. Do this by checking for present core (net->ipvs). Signed-off-by:
-
Shan Wei authored
When we use netlink to monitor queue information for udp socket, idiag_rqueue and idiag_wqueue of inet_diag_msg are returned with 0. Keep consistent with netstat, just return back allocated rmem/wmem size. Signed-off-by:
Shan Wei <davidshan@tencent.com> Acked-by:
Pavel Emelyanov <xemul@parallels.com> Signed-off-by:
-
- 25 Apr, 2012 8 commits
-
-
-
Matt Carlson authored
When RSS is enabled, interrupt vector 0 does not receive any rx traffic. The rx producer index fields for vector 0's status block should be considered reserved in this case. This patch changes the code to respect these reserved fields, which avoids a kernel panic when these fields take on non-zero values. Signed-off-by:
Matt Carlson <mcarlson@broadcom.com> Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Benjamin Poirier authored
Changes this beauty into a statement that actually has an effect on amd64. Tested-by:
Per Jessen <per@opensuse.org> Signed-off-by:
Benjamin Poirier <bpoirier@suse.de> Signed-off-by:
-
John W. Linville authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
-
Julian Anastasov authored
commit 14e40546 (2.6.39) ("Add __ip_vs_control_{init,cleanup}_sysctl()") introduced regression due to wrong __net_init for __ip_vs_control_cleanup_sysctl. This leads to crash when the ip_vs module is unloaded. Fix it by changing __net_init to __net_exit for the function that is already renamed to ip_vs_control_net_cleanup_sysctl. Signed-off-by:
Hans Schillstrom <hans@schillstrom.com> Signed-off-by:
-
Sasha Levin authored
The registration of a protocol might fail, there were no checks and all registrations were assumed to be correct. This lead to NULL ptr dereferences when apps tried registering. For example: [ 1293.226051] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 [ 1293.227038] IP: [<ffffffff822aacb0>] tcp_register_app+0x60/0xb0 [ 1293.227038] PGD 391de067 PUD 6c20b067 PMD 0 [ 1293.227038] Oops: 0000 [#1] PREEMPT SMP [ 1293.227038] CPU 1 [ 1293.227038] Pid: 19609, comm: trinity Tainted: G W 3.4.0-rc1-next-20120405-sasha-dirty #57 [ 1293.227038] RIP: 0010:[<ffffffff822aacb0>] [<ffffffff822aacb0>] tcp_register_app+0x60/0xb0 [ 1293.227038] RSP: 0018:ffff880038c1dd18 EFLAGS: 00010286 [ 1293.227038] RAX: ffffffffffffffc0 RBX: 0000000000001500 RCX: 0000000000010000 [ 1293.227038] RDX: 0000000000000000 RSI: ffff88003a2d5888 RDI: 0000000000000282 [ 1293.227038] RBP: ffff880038c1dd48 R08: 0000000000000000 R09: 0000000000000000 [ 1293.227038] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88003a2d5668 [ 1293.227038] R13: ffff88003a2d5988 R14: ffff8800696a8ff8 R15: 0000000000000000 [ 1293.227038] FS: 00007f01930d9700(0000) GS:ffff88007ce00000(0000) knlGS:0000000000000000 [ 1293.227038] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 1293.227038] CR2: 0000000000000018 CR3: 0000000065dfc000 CR4: 00000000000406e0 [ 1293.227038] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1293.227038] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 1293.227038] Process trinity (pid: 19609, threadinfo ffff880038c1c000, task ffff88002dc73000) [ 1293.227038] Stack: [ 1293.227038] ffff880038c1dd48 00000000fffffff4 ffff8800696aada0 ffff8800694f5580 [ 1293.227038] ffffffff8369f1e0 0000000000001500 ffff880038c1dd98 ffffffff822a716b [ 1293.227038] 0000000000000000 ffff8800696a8ff8 0000000000000015 ffff8800694f5580 [ 1293.227038] Call Trace: [ 1293.227038] [<ffffffff822a716b>] ip_vs_app_inc_new+0xdb/0x180 [ 1293.227038] [<ffffffff822a7258>] register_ip_vs_app_inc+0x48/0x70 [ 1293.227038] [<ffffffff822b2fea>] __ip_vs_ftp_init+0xba/0x140 [ 1293.227038] [<ffffffff821c9060>] ops_init+0x80/0x90 [ 1293.227038] [<ffffffff821c90cb>] setup_net+0x5b/0xe0 [ 1293.227038] [<ffffffff821c9416>] copy_net_ns+0x76/0x100 [ 1293.227038] [<ffffffff810dc92b>] create_new_namespaces+0xfb/0x190 [ 1293.227038] [<ffffffff810dca21>] unshare_nsproxy_namespaces+0x61/0x80 [ 1293.227038] [<ffffffff810afd1f>] sys_unshare+0xff/0x290 [ 1293.227038] [<ffffffff8187622e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 1293.227038] [<ffffffff82665539>] system_call_fastpath+0x16/0x1b [ 1293.227038] Code: 89 c7 e8 34 91 3b 00 89 de 66 c1 ee 04 31 de 83 e6 0f 48 83 c6 22 48 c1 e6 04 4a 8b 14 26 49 8d 34 34 48 8d 42 c0 48 39 d6 74 13 <66> 39 58 58 74 22 48 8b 48 40 48 8d 41 c0 48 39 ce 75 ed 49 8d [ 1293.227038] RIP [<ffffffff822aacb0>] tcp_register_app+0x60/0xb0 [ 1293.227038] RSP <ffff880038c1dd18> [ 1293.227038] CR2: 0000000000000018 [ 1293.379284] ---[ end trace 364ab40c7011a009 ]--- [ 1293.381182] Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by:
Sasha Levin <levinsasha928@gmail.com> Acked-by:
-
Jeff Kirsher authored
Based on the original patch from Ying Cai <ycai@google.com> This change ensures that the itr/itr_setting adjustment logic is used, even for the default/compiled-in value. Context: When we changed the default InterruptThrottleRate value from default (3 = dynamic mode) to 8000 for example, only adapter->itr_setting (which controls interrupt coalescing mode) was set to 8000, but adapter->itr (which controls the value set in NIC register) was not updated accordingly. So from ethtool, it seemed the interrupt throttling is enabled at 8000 intr/s, but the NIC actually was running in dynamic mode which has lower CPU efficiency especially when throughput is not high. CC: Ying Cai <ycai@google.com> CC: David Decotigny <david.decotigny@google.com> Signed-off-by:
Jeff Kirsher <jeffrey.kirsher@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com>
-
Prasanna S Panchamukhi authored
Following logs where seen on Systems with multiple NICs, while using MSI interrupts as shown below: Feb 16 15:09:32 (none) user.notice kernel: 0000:00:0d.0: lan0_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:32 (none) user.notice kernel: 0000:40:0d.0: wan0_1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:32 (none) user.notice kernel: 0000:40:0d.0: lan0_1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:32 (none) user.warn kernel: 0000:40:0e.0: wan4_0: MSI interrupt test failed, using legacy interrupt. Feb 16 15:09:32 (none) user.notice kernel: 0000:00:0e.0: wan1_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:33 (none) user.notice kernel: 0000:00:0e.0: lan1_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:33 (none) user.notice kernel: 0000:00:0f.0: wan2_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:33 (none) user.notice kernel: 0000:00:0f.0: lan2_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:33 (none) user.notice kernel: 0000:40:0a.0: wan3_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:33 (none) user.notice kernel: 0000:40:0a.0: lan3_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:34 (none) user.notice kernel: 0000:40:0e.0: lan4_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:34 (none) user.notice kernel: 0000:40:0f.0: wan5_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:34 (none) user.notice kernel: 0000:40:0f.0: lan5_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX This patch fixes this problem by increasing the msleep from 50 to 100. Signed-off-by:
Prasanna S Panchamukhi <ppanchamukhi@riverbed.com> Tested-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 24 Apr, 2012 8 commits
-
-
Eliad Peller authored
ieee80211_mgd_teardown() is called on netdev removal, which occurs after the vif was already removed from the low-level driver, resulting in the following warning: [ 4809.014734] ------------[ cut here ]------------ [ 4809.019861] WARNING: at net/mac80211/driver-ops.h:12 ieee80211_bss_info_change_notify+0x200/0x2c8 [mac80211]() [ 4809.030388] wlan0: Failed check-sdata-in-driver check, flags: 0x4 [ 4809.036862] Modules linked in: wlcore_sdio(-) wl12xx wlcore mac80211 cfg80211 [last unloaded: cfg80211] [ 4809.046849] [<c001bd4c>] (unwind_backtrace+0x0/0x12c) [ 4809.055937] [<c047cf1c>] (dump_stack+0x20/0x24) [ 4809.065385] [<c003e334>] (warn_slowpath_common+0x5c/0x74) [ 4809.075589] [<c003e408>] (warn_slowpath_fmt+0x40/0x48) [ 4809.088291] [<bf033630>] (ieee80211_bss_info_change_notify+0x200/0x2c8 [mac80211]) [ 4809.102844] [<bf067f84>] (ieee80211_destroy_auth_data+0x80/0xa4 [mac80211]) [ 4809.116276] [<bf068004>] (ieee80211_mgd_teardown+0x5c/0x74 [mac80211]) [ 4809.129331] [<bf043f18>] (ieee80211_teardown_sdata+0xb0/0xd8 [mac80211]) [ 4809.141595] [<c03b5e58>] (rollback_registered_many+0x228/0x2f0) [ 4809.153056] [<c03b5f48>] (unregister_netdevice_many+0x28/0x50) [ 4809.165696] [<bf041ea8>] (ieee80211_remove_interfaces+0xb4/0xdc [mac80211]) [ 4809.179151] [<bf032174>] (ieee80211_unregister_hw+0x50/0xf0 [mac80211]) [ 4809.191043] [<bf0bebb4>] (wlcore_remove+0x5c/0x7c [wlcore]) [ 4809.201491] [<c02c6918>] (platform_drv_remove+0x24/0x28) [ 4809.212029] [<c02c4d50>] (__device_release_driver+0x8c/0xcc) [ 4809.222738] [<c02c4e84>] (device_release_driver+0x30/0x3c) [ 4809.233099] [<c02c4258>] (bus_remove_device+0x10c/0x128) [ 4809.242620] [<c02c26f8>] (device_del+0x11c/0x17c) [ 4809.252150] [<c02c6de0>] (platform_device_del+0x28/0x68) [ 4809.263051] [<bf0df49c>] (wl1271_remove+0x3c/0x50 [wlcore_sdio]) [ 4809.273590] [<c03806b0>] (sdio_bus_remove+0x48/0xf8) [ 4809.283754] [<c02c4d50>] (__device_release_driver+0x8c/0xcc) [ 4809.293729] [<c02c4e2c>] (driver_detach+0x9c/0xc4) [ 4809.303163] [<c02c3d7c>] (bus_remove_driver+0xc4/0xf4) [ 4809.312973] [<c02c5a98>] (driver_unregister+0x70/0x7c) [ 4809.323220] [<c03809c4>] (sdio_unregister_driver+0x24/0x2c) [ 4809.334213] [<bf0df458>] (wl1271_exit+0x14/0x1c [wlcore_sdio]) [ 4809.344930] [<c009b1a4>] (sys_delete_module+0x228/0x2a8) [ 4809.354734] ---[ end trace 515290ccf5feb522 ]--- Rename ieee80211_mgd_teardown() to ieee80211_mgd_stop(), and call it on ieee80211_do_stop(). Signed-off-by:
Eliad Peller <eliad@wizery.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Meenakshi Venkataraman authored
Report correctly the latest released version of the iwlwifi firmware for all iwlwifi-supported devices. Cc: stable@vger.kernel.org #3.3+ Signed-off-by:
Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by:
-
Johannes Berg authored
Newer devices have 20 (5000 series) or 30 (6000 series) hardware queues, rather than the 16 that 4965 had. This was added to the driver a long time ago, but improperly: the queue registers for the higher queues aren't just continuations of the registers for the first 16 queues, they are in other places. Therefore, the hardware would lock up when trying to activate queue 16 or above and the device would have to be restarted. Thanks goes to Emmanuel who identified this and told me how the queue programming should be done. Note that we don't use queues 20 and higher today and doing so needs more work than this. Cc: stable@vger.kernel.org Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Ingo van Lil authored
The asix.c USB Ethernet driver avoids ending a tx transfer with a zero- length packet by appending a four-byte padding to transfers whose length is a multiple of maxpacket. However, the hard-coded 512 byte maxpacket length is valid for high-speed USB only; full-speed USB uses 64 byte packets. Signed-off-by:
Ingo van Lil <inguin@gmx.de> Signed-off-by:
-
Anatolij Gustschin authored
PHY connect attempts fail if no PHY id is specified in the emac platform data and another mdio bus has been registered before 'davinci_mdio' bus. In this case when configuring the interface, there will be an attempt to connect to already attached PHY on the previously registered mdio bus: net eth1: PHY already attached net eth1: could not connect to phy smsc911x-0:01 IP-Config: Failed to open eth1 IP-Config: Device `eth1' not found Fix this by modifying match_first_device() to match first PHY device on 'davinci_mdio' bus. Signed-off-by:
Anatolij Gustschin <agust@denx.de> Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
If we receive an interrupt too early before we set up ports in the probe function, there won't be any port ready to handle it. Only registering the irq after the ports are setup fixes the problem, and works fine without losing any interrupts. This causes crashes in some situations: [c000000f7ff7fd60] d000000008e223f0 .ehea_neq_tasklet+0x78/0x148 [ehea] [c000000f7ff7fe00] c0000000000b6cac .tasklet_hi_action+0xdc/0x210 [c000000f7ff7fea0] c0000000000b7cc8 .__do_softirq+0x178/0x300 [c000000f7ff7ff90] c000000000022694 .call_do_softirq+0x14/0x24 [c000000f68ee7900] c000000000010e04 .do_softirq+0xec/0x110 [c000000f68ee79a0] c0000000000b789c .irq_exit+0xac/0xe0 [c000000f68ee7a20] c0000000000110bc .do_IRQ+0x114/0x2a8 [c000000f68ee7ae0] c00000000000553c hardware_interrupt_entry+0x18/0x1c Signed-off-by: -
Stefan Raspl authored
The previous blkt defaults for OSA Express 4 cards produced inadequate performance for streaming workloads. The present patch will apply a set of more appropriate defaults. Signed-off-by:
Stefan Raspl <raspl@linux.vnet.ibm.com> Reviewed-by:
Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by:
Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by:
-
Ursula Braun authored
There exist qeth sysfs blkt attributes to change the default blkt values. But blkt changes are reset during online setting due to a 2nd invocation of qeth_determine_capabilites(). This patch makes sure blkt default values are configured during 1st run of qeth_determine_capabilities() only. Thus blkt changes are kept during online setting. Signed-off-by:
Horst Hartmann <horst.hartmann@de.ibm.com> Signed-off-by:
-
