Merge tag 'tegra-for-3.11-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/soc

From Stephen Warren:
ARM: tegra: core SoC support enhancements

This branch contains fixes and enhancement for core Tegra Soc support:
* CPU hotplug support for Tegra114.
* Some preliminary work on Tegra114 CPU sleep modes.
* Minor fix for EMC table DT parsing.

* tag 'tegra-for-3.11-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
  ARM: tegra: don't pass CPU ID to tegra_{set,clear}_cpu_in_lp2
  ARM: tegra: cpuidle: using IS_ENABLED for multi SoCs management in init func
  ARM: tegra: hook tegra_tear_down_cpu function in the PM suspend init function
  ARM: tegra: cpuidle: move the init function behind the suspend init function
  ARM: tegra: remove ifdef in the tegra_resume
  ARM: tegra: add cpu_disable for hotplug
  ARM: tegra114: add CPU hotplug support
  clk: tegra114: implement wait_for_reset and disable_clock for tegra_cpu_car_ops
  ARM: tegra114: add power up sequence for warm boot CPU
  ARM: tegra: make tegra_resume can work for Tegra114
  ARM: tegra: skip SCU and PL310 code when CPU is not Cortex-A9
  ARM: tegra: add an assembly marco to check Tegra SoC ID
  ARM: tegra: emc: correction of ram-code parsing from dt
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-soc2-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

From Simon Horman:
Second Round of Renesas ARM-based SoC updates for v3.11

* Ether device name updates for r8a7778 and r8a7779 Sergei Shtylyov
* Extended clock and driver coverage for r8a7778 by Goda-san and Morimoto-san
* Extended clock and coverage for r8a73a4 and r8a7790 by  Guennadi Liakhovetski
* HSCIF support for r8a7790 by Ulrich Hecht

* tag 'renesas-soc2-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: r8a7790: add clock definitions and aliases for MMCIF and SDHI
  ARM: shmobile: r8a73a4: add clock definitions and aliases for MMCIF and SDHI
  ARM: shmobile: r8a7778: add support MMC driver
  ARM: shmobile: r8a7778: add support HSPI driver
  ARM: shmobile: r8a7778: add support I2C driver
  ARM: shmobile: r8a7778: add support MMC clock
  ARM: shmobile: r8a7778: add support HSPI clock
  ARM: shmobile: r8a7778: add support I2C clock
  ARM: shmobile: r8a7790: HSCIF support
  ARM: shmobile: r8a7778: fix Ether device name
  ARM: shmobile: r8a7779: fix Ether device name
Signed-off-by: Olof Johansson <olof@lixom.net>

Conflicts:
	arch/arm/mach-shmobile/clock-r8a7778.c
	arch/arm/mach-shmobile/include/mach/r8a7778.h

Merge tag 'renesas-phy-rcar-usb-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

From Simon Horman:
Renesas USB updates for v3.11

These updates are by Sergei Shtylyov to clean-up USB support
present for R8A7779/Marzen and then extend USB support coverage to
R8A7778/BOCK-W.

* tag 'renesas-phy-rcar-usb-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: BOCK-W: add USB support
  ARM: shmobile: r8a7778: add USB support
  phy-rcar-usb: add R8A7778 support
  phy-rcar-usb: handle platform data
  ARM: shmobile: Marzen: pass platform data to USB PHY device
  phy-rcar-usb: add platform data
  phy-rcar-usb: correct base address
  ARM: shmobile: r8a7779: remove USB PHY 2nd memory resource
  phy-rcar-usb: remove EHCI internal buffer setup
  ARM: shmobile: r8a7779: setup EHCI internal buffer
  ehci-platform: add pre_setup() method to platform data
  ARM: shmobile: Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code

Conflicts:
	arch/arm/mach-shmobile/board-marzen.c
	arch/arm/mach-shmobile/setup-r8a7778.c
Signed-off-by: Olof Johansson <olof@lixom.net>

mvebu register map changes for v3.11

This series removes the hardcoded register base address for mvebu.

Depends:
 - mvebu/fixes-non-critical (up to tags/fixes-non-3.11-1)
 - mvebu/cleanup (up to tags/cleanup-3.11-3)

* tag 'regmap-3.11' of git://git.infradead.org/users/jcooper/linux:
  arm: mvebu: disable DEBUG_LL/EARLY_PRINTK in defconfig
  arm: mvebu: add another earlyprintk Kconfig option
  arm: mvebu: don't hardcode the physical address for mvebu-mbus
  arm: mvebu: don't hardcode a physical address in headsmp.S
  arm: mvebu: remove hardcoded static I/O mapping
  arm: mvebu: move cache and mvebu-mbus initialization later
  arm: mvebu: avoid hardcoded virtual address in coherency code
  arm: mvebu: remove dependency of SMP init on static I/O mapping
  arm: mvebu: fix length of Ethernet registers area in .dtsi
  arm: mvebu: fix length of SATA registers area in .dtsi
  arm: mvebu: mark functions of armada-370-xp.c as static
  ARM: mvebu: Remove init_irq declaration in machine description
  ARM: Orion: Remove redundant init_dma_coherent_pool_size()
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v3.11/omap5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

From Tony Lindgren:
Omap5 SoC data via Paul Walmsley <paul@pwsan.com:

Add support for the OMAP5 SoC family.

As part of the transition to DT, no board files will be used
for OMAP5.  The hwmod data is gradually being transitioned
away from arch/arm/mach-omap2: IRQ, DMA, and memory map data
has been moved to DT.  Hopefully the dev_attr and clock role
data will be the next step.

Basic test logs are available here, although not for OMAP5,
since I don't have an OMAP5 board:
http://www.pwsan.com/omap/testlogs/omap5_v3.10/20130608130949/

* tag 'omap-for-v3.11/omap5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP5: Remove unused include for ocp2scp
  ARM: OMAP5: Enable build and frameowrk initialisations
  ARM: OMAP5: voltagedomain data: Add OMAP5 voltage domain data
  ARM: OMAP5: hwmod data: Create initial OMAP5 SOC hwmod data
  ARM: OMAP5: powerdomain data: Add OMAP54XX data and update the header
  ARM: OMAP5: clockdomain data: Add OMAP54XX data and update the header
  ARM: OMAP5: SCRM: Add OMAP54XX header file.
  ARM: OMAP5: PRCM: Add OMAP54XX local MPU PRCM registers
  ARM: OMAP4+: PRCM MPU: Move function prototypes to common header for re-use
  ARM: OMAP5: CM: Add OMAP54XX register and bitfield files
  ARM: OMAP4+: CM: Move function prototypes to common header for re-use
  ARM: OMAP5: PRM: Add OMAP54XX register and bitfield files
  ARM: OMAP4+: PRM: Move function prototypes to common header for re-use
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v3.11/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

From Tony Lindgren:
Omap SoC changes. Mostly improves am33xx support, and adds
minimal support for am43x SoCs.

* tag 'omap-for-v3.11/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: AM43x: SRAM base and size
  ARM: OMAP2+: AM43x: GP or HS ?
  ARM: OMAP2+: AM43x: early init
  ARM: OMAP2+: AM43x: static mapping
  ARM: OMAP2+: AM437x: SoC revision detection
  ARM: OMAP2+: AM43x: soc_is support
  ARM: OMAP2+: AM43x: kbuild
  ARM: OMAP2+: AM43x: Kconfig
  ARM: OMAP2+: separate out OMAP4 restart
  ARM: AM33XX: clk: Add clock node for EHRPWM TBCLK
  ARM: OMAP3: clock data: get rid of unused USB host clock aliases and dummies
  ARM: OMAP2+: AM33xx: Add missing reset status info to GFX hwmod
  + Linux 3.10-rc5
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v3.11/pm-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

From Tony Lindgren:
Omap PM changes via Kevin Hilman <khilman@linaro.org>:

OMAP PM cleanups for v3.10

* tag 'omap-for-v3.11/pm-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP4+: PM: Consolidate OMAP4 PM code to re-use it for OMAP5
  ARM: OMAP4+: Make secondary_startup function name more consistent
  ARM: OMAP4+: PM: Consolidate MPU subsystem PM code for re-use
  ARM: OMAP4: PM: Avoid expensive cpu_suspend() path for all CPU power states except off

Now that we have two different addresses for the UART, depending on
which bootloader is used, it is no longer desirable to enable
earlyprintk by default in the defconfig. Users who need earlyprintk
support will have to enable it explicitly, and select the right UART
configuration depending on their platform.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

In order to support both old and new bootloaders, we add a new Kconfig
option for the earlyprintk UART selection. The existing option allows
to work with old bootloaders (that keep the internal registers mapped
at 0xd0000000), while the newly introduced option allows to work with
new bootloaders (that remap the internal registers at 0xf1000000).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Since the mvebu-mbus driver doesn't yet have a DT binding (and this DT
binding may not necessarily be ready for 3.11), the physical address
of the mvebu-mbus registers are currently hardcoded. This doesn't play
well with the fact that the internal registers base address may be
different depending on the bootloader.

In order to have only one central place for the physical address of
the internal registers, we now use of_translate_address() to translate
the mvebu-mbus register offsets into the real physical address, by
using DT-based address translation. This will go away once the
mvebu-mbus driver gains a proper DT binding.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Now that the coherency_init() function is called a bit earlier, we can
actually read the physical address of the coherency unit registers
from the Device Tree, and communicate that to the headsmp.S code,
which avoids hardcoding a physical address.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Now that we have removed the need of the static I/O mapping for early
initialization reasons, and fixed the registers area length that were
broken, we can get rid of the static I/O mapping. Only the earlyprintk
mapping needs to be set up, using the debug_ll_io_init() helper
function.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Current, the L2 cache and the mvebu-mbus drivers are initialized at
->init_early() time. However, at ->init_early() time, ioremap() only
works if a static I/O mapping has already been put in place. If it's
not the case, it tries to do a memory allocation with kmalloc() which
is not possible so early at this stage of the initialization.

Since we want to get rid of the static I/O mapping, we cannot
initialize the L2 cache driver and the mvebu-mbus driver so early. So,
we move their initialization to the ->init_time() level, which is
slightly later (so ioremap() works properly), but sufficiently early
to be before the call of the ->smp_prepare_cpus() hook, which creates
an address decoding window for the BootROM, which requires the
mvebu-mbus driver to be properly initialized.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Now that the coherency_get_cpu_count() function no longer requires a
very early mapping of the coherency unit registers, we can avoid the
hardcoded virtual address in coherency.c. However, the coherency
features are still used quite early, so we need to do the of_iomap()
early enough, at the ->init_timer() level, so we have the call of
coherency_init() at this point.

Unfortunately, at ->init_timer() time, it is not possible to register
a bus notifier, so we add a separate coherency_late_init() function
that gets called as as postcore_initcall(), when bus notifiers are
available.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

The ->smp_init_cpus() function is called very early during boot, at a
point where dynamic I/O mappings are not yet possible. However, in the
Armada 370/XP implementation of this function, we have to get the
number of CPUs. We used to do that by accessing a hardware register,
which requires relying on a static I/O mapping set up by
->map_io(). Not only this requires hardcoding a virtual address, but
it also prevents us from removing the static I/O mapping.

So this commit changes the way used to get the number of CPUs: we now
use the Device Tree, which is a representation of the hardware, and
provides us the number of available CPUs. This is also more accurate,
because it potentially allows to boot the Linux kernel on only a
number of CPUs given by the Device Tree, instead of unconditionally on
all CPUs.

As a consequence, the coherency_get_cpu_count() function becomes no
longer used, so we remove it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

mvebu cleanup for v3.11 (round 3)

 - mvebu
    - mark functions in armada-370-xp.c as static

mvebu fixes non-critical for v3.11 (round 1)

 - mvebu
    - fix register area length in dtsi for ethernet and sata

Merge tag 's3c24xx-arch-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc

From Kukjin Kim, DMA driver updates for s3c24xx.

* tag 's3c24xx-arch-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: S3C24XX: remove obsolete s3c2412 specific dma settings
  ARM: S3C24XX: dma-s3c2443 - do not write into arbitary bits
  ARM: S3C24XX: split s3c2412 spi dma channels
Signed-off-by: Olof Johansson <olof@lixom.net>

This definition corresponds to the L3_OCMC0,
as in case of AM33XX.
Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Afzal Mohammed <afzal@ti.com>
[tony@atomide.com: updated to remove default y]
Signed-off-by: Tony Lindgren <tony@atomide.com>

Detect whether GP or HS, similar to the AM335x way.
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Minimal early init - PRCM initialization not yet taken care.

Control module is similar (base address, feature register etc.) as
that of AM335x, while PRCM base address is different. Instead of
adding a new header file for AM43x, PRCM base address is added in
AM335x header file as it is similar to it to a large extent.
Signed-off-by: Afzal Mohammed <afzal@ti.com>
[tony@atomide.com: updated to drop am33xx_check_features()]
Signed-off-by: Tony Lindgren <tony@atomide.com>

AM43x L4 WKUP/PER mappings are similar to AM335x, reuse.
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Detect 437x SoC revision.
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

soc_is support for AM43x family of SoC's. Only variant now is AM437x,
it is made as a subclass of AM43x.
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Build pieces that could be reused for AM43x - GIC related, secure
related and common PRCM.
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Kconfig for AM43x (Cortex A9) family of SoC's.
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Separate out OMAP4 restart and have it similar to other platforms, in
a different file. Main motive is to reuse omap4-common on platforms
other than OMAP4, like AM43x, even if OMAP4 is deselected (otherwise
would have caused build breakage).
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add MSTP clock definitions and fix aliases for the two MMCIF and four SDHI
interfaces on r8a7790 (H2).
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
[horms+renesas@verge.net.au: applied manually]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Add MSTP clock definitions and fix aliases for the two MMCIF and three SDHI
interfaces on r8a73a4 (APE6).
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

SOCFPGA has a system manager register block can be accessed by using
the syscon driver.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Cc: Pavel Machek <pavel@denx.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Olof Johansson <olof@lixom.net>
Cc: <linux@arm.linux.org.uk>
Signed-off-by: Olof Johansson <olof@lixom.net>

Add support to gate the clocks that directly feed peripherals. For clocks
with multiple parents, add the ability to determine the correct parent,
and also set parents. Also add support to calculate and set the clocks'
rate.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Reviewed-by: Pavel Machek <pavel@denx.de>
Acked-by: Mike Turquette <mturquette@linaro.org>
Cc: Mike Turquette <mturquette@linaro.org>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Olof Johansson <olof@lixom.net>
Cc: Pavel Machek <pavel@denx.de>
CC: <linux@arm.linux.org.uk>

v4:
- Add Acked-by: Mike Turquette

v3:
- Addressed comments from Pavel

v2:
- Fix space/indent errors
- Add streq for strcmp == 0
Signed-off-by: Olof Johansson <olof@lixom.net>

From Alexander Shiyan, this is a series of cleanups of clps711x, movig it
closer to multiplatform and cleans up a bunch of old code.

* clps711x/soc:
  ARM: clps711x: Update defconfig
  ARM: clps711x: Add support for SYSCON driver
  ARM: clps711x: edb7211: Control LCD backlight via PWM
  ARM: clps711x: edb7211: Add support for I2C
  ARM: clps711x: Optimize interrupt handling
  ARM: clps711x: Add clocksource framework
  ARM: clps711x: Replace "arch_initcall" in common code with ".init_early"
  ARM: clps711x: Move specific definitions from hardware.h to boards files
  ARM: clps711x: p720t: Define PLD registers as GPIOs
  ARM: clps711x: autcpu12: Move remaining specific definitions to board file
  ARM: clps711x: autcpu12: Special driver for handling memory is removed
  ARM: clps711x: autcpu12: Add support for NOR flash
  ARM: clps711x: autcpu12: Move LCD DPOT definitions to board file
  ARM: clps711x: Set PLL clock to zero if we work from 13 mHz source
  ARM: clps711x: Remove NEED_MACH_MEMORY_H dependency
  ARM: clps711x: Re-add GPIO support
  GPIO: clps711x: Add DT support
  GPIO: clps711x: Rewrite driver for using generic GPIO code
  + Linux 3.10-rc4
Signed-off-by: Olof Johansson <olof@lixom.net>

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>

This patch adds support for SYSCON driver for CLPS711X targets.
At this time there are no users for this driver, but it is will
be used as start point to use in CLPS711X drivers and remove
<mach/xx> dependencies.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>

This patch provide control LCD backlight via PWM. GPIO is used
only for switch backlight ON and OFF.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>

This patch modify interrupt handler for processing all penging interrupts
at once.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>