- 22 Mar, 2016 19 commits
-
-
Lan Tianyu authored
Update spte before increasing tlbs_dirty to make sure no tlb flush in lost after spte is zapped. This pairs with the barrier in the kvm_flush_remote_tlbs(). Signed-off-by:
Lan Tianyu <tianyu.lan@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Lan Tianyu authored
Signed-off-by:
-
Lan Tianyu authored
Signed-off-by:
-
Lan Tianyu authored
There is already a barrier inside of kvm_flush_remote_tlbs() which can help to make sure everyone sees our modifications to the page tables and see changes to vcpu->mode here. So remove the smp_mb in the kvm_mmu_commit_zap_page() and update the comment. Signed-off-by:
-
Huaitong Han authored
X86_FEATURE_PKU is referred to as "PKU" in the hardware documentation: CPUID.7.0.ECX[3]:PKU. X86_FEATURE_OSPKE is software support for pkeys, enumerated with CPUID.7.0.ECX[4]:OSPKE, and it reflects the setting of CR4.PKE(bit 22). This patch disables CPUID:PKU without ept, because pkeys is not yet implemented for shadow paging. Signed-off-by:
Huaitong Han <huaitong.han@intel.com> Reviewed-by:
Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by:
-
Huaitong Han authored
Protection keys define a new 4-bit protection key field (PKEY) in bits 62:59 of leaf entries of the page tables, the PKEY is an index to PKRU register(16 domains), every domain has 2 bits(write disable bit, access disable bit). Static logic has been produced in update_pkru_bitmask, dynamic logic need read pkey from page table entries, get pkru value, and deduce the correct result. [ Huaitong: Xiao helps to modify many sections. ] Signed-off-by:
-
Huaitong Han authored
PKEYS defines a new status bit in the PFEC. PFEC.PK (bit 5), if some conditions is true, the fault is considered as a PKU violation. pkru_mask indicates if we need to check PKRU.ADi and PKRU.WDi, and does cache some conditions for permission_fault. [ Huaitong: Xiao helps to modify many sections. ] Signed-off-by:
-
Xiao Guangrong authored
Currently XSAVE state of host is not restored after VM-exit and PKRU is managed by XSAVE so the PKRU from guest is still controlling the memory access even if the CPU is running the code of host. This is not safe as KVM needs to access the memory of userspace (e,g QEMU) to do some emulation. So we save/restore PKRU when guest/host switches. Signed-off-by:
-
Xiao Guangrong authored
KVM will use it to switch pkru between guest and host. CC: Ingo Molnar <mingo@redhat.com> CC: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by:
-
Huaitong Han authored
This patch adds pkeys support for xsave state. Signed-off-by:
-
Huaitong Han authored
Pkeys is disabled if CPU is in non-paging mode in hardware. However KVM always uses paging mode to emulate guest non-paging, mode with TDP. To emulate this behavior, pkeys needs to be manually disabled when guest switches to non-paging mode. Signed-off-by:
-
Huaitong Han authored
This patch removes magic number with enum cpuid_leafs. Signed-off-by:
-
Paolo Bonzini authored
This will help in the implementation of PKRU, where the PK bit of the page fault error code cannot be computed in advance (unlike I/D, R/W and U/S). Signed-off-by: -
Paolo Bonzini authored
Moving the initialization earlier is needed in 4.6 because kvm_arch_init_vm is now using mmu_lock, causing lockdep to complain: [ 284.440294] INFO: trying to register non-static key. [ 284.445259] the code is fine but needs lockdep annotation. [ 284.450736] turning off the locking correctness validator. ... [ 284.528318] [<ffffffff810aecc3>] lock_acquire+0xd3/0x240 [ 284.533733] [<ffffffffa0305aa0>] ? kvm_page_track_register_notifier+0x20/0x60 [kvm] [ 284.541467] [<ffffffff81715581>] _raw_spin_lock+0x41/0x80 [ 284.546960] [<ffffffffa0305aa0>] ? kvm_page_track_register_notifier+0x20/0x60 [kvm] [ 284.554707] [<ffffffffa0305aa0>] kvm_page_track_register_notifier+0x20/0x60 [kvm] [ 284.562281] [<ffffffffa02ece70>] kvm_mmu_init_vm+0x20/0x30 [kvm] [ 284.568381] [<ffffffffa02dbf7a>] kvm_arch_init_vm+0x1ea/0x200 [kvm] [ 284.574740] [<ffffffffa02bff3f>] kvm_dev_ioctl+0xbf/0x4d0 [kvm] However, it also helps fixing a preexisting problem, which is why this patch is also good for stable kernels: kvm_create_vm was incrementing current->mm->mm_count but not decrementing it at the out_err label (in case kvm_init_mmu_notifier failed). The new initialization order makes it possible to add the required mmdrop without adding a new error label. Cc: stable@vger.kernel.org Reported-by:
Borislav Petkov <bp@alien8.de> Signed-off-by:
-
Alexey Kardashevskiy authored
Upcoming in-kernel VFIO acceleration needs different handling in real and virtual modes which makes it hard to support both modes in the same handler. This creates a copy of kvmppc_rm_h_stuff_tce and kvmppc_rm_h_put_tce in addition to the existing kvmppc_rm_h_put_tce_indirect. This also fixes linker breakage when only PR KVM was selected (leaving HV KVM off): the kvmppc_h_put_tce/kvmppc_h_stuff_tce functions would not compile at all and the linked would fail. Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
-
Paolo Bonzini authored
Old KVM guests invoke single-context invvpid without actually checking whether it is supported. This was fixed by commit 518c8aee ("KVM: VMX: Make sure single type invvpid is supported before issuing invvpid instruction", 2010-08-01) and the patch after, but pre-2.6.36 kernels lack it including RHEL 6. Reported-by: jmontleo@redhat.com Tested-by: jmontleo@redhat.com Cc: stable@vger.kernel.org Fixes: 99b83ac8Reviewed-by:
David Matlack <dmatlack@google.com> Signed-off-by:
-
Paolo Bonzini authored
A guest executing an invalid invvpid instruction would hang because the instruction pointer was not updated. Reported-by: jmontleo@redhat.com Tested-by: jmontleo@redhat.com Cc: stable@vger.kernel.org Fixes: 99b83ac8Reviewed-by:
-
Paolo Bonzini authored
A guest executing an invalid invept instruction would hang because the instruction pointer was not updated. Cc: stable@vger.kernel.org Fixes: bfd0a56bReviewed-by:
-
Paolo Bonzini authored
Merge tag 'kvm-arm-for-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/ARM Changes for v4.6-rc1 Second round of patches for v4.6-rc1, fixing a small handful of issue: - disable preemption when calling smp_call_function_many - Make kvm_ksym_ref work on VHE systems again after KASRL breakage - Disable compiler instrumentation for hypervisor code that could make KVM/arm64 blow up.
-
- 21 Mar, 2016 6 commits
-
-
Catalin Marinas authored
With the recent rewrite of the arm64 KVM hypervisor code in C, enabling certain options like KASAN would allow the compiler to generate memory accesses or function calls to addresses not mapped at EL2. This patch disables the compiler instrumentation on the arm64 hypervisor code for gcov-based profiling (GCOV_KERNEL), undefined behaviour sanity checker (UBSAN) and kernel address sanitizer (KASAN). Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: <stable@vger.kernel.org> # 4.5+ Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org>
-
Marc Zyngier authored
When running with VHE, there is no need to translate kernel pointers to the EL2 memory space, since we're already there (and we have a much saner memory map to start with). Unfortunately, kvm_ksym_ref is getting in the way, and the first call into the "hypervisor" section is going to end up in fireworks, since we're now branching into nowhereland. Meh. A potential solution is to test if VHE is engaged or not, and only perform the translation in the negative case. With this in place, VHE is able to run again. Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Eric Auger authored
Preemption must be disabled when calling smp_call_function_many Reported-by: bartosz.wawrzyniak@tieto.com Signed-off-by:
Eric Auger <eric.auger@linaro.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 protection key support from Ingo Molnar: "This tree adds support for a new memory protection hardware feature that is available in upcoming Intel CPUs: 'protection keys' (pkeys). There's a background article at LWN.net: https://lwn.net/Articles/643797/ The gist is that protection keys allow the encoding of user-controllable permission masks in the pte. So instead of having a fixed protection mask in the pte (which needs a system call to change and works on a per page basis), the user can map a (handful of) protection mask variants and can change the masks runtime relatively cheaply, without having to change every single page in the affected virtual memory range. This allows the dynamic switching of the protection bits of large amounts of virtual memory, via user-space instructions. It also allows more precise control of MMU permission bits: for example the executable bit is separate from the read bit (see more about that below). This tree adds the MM infrastructure and low level x86 glue needed for that, plus it adds a high level API to make use of protection keys - if a user-space application calls: mmap(..., PROT_EXEC); or mprotect(ptr, sz, PROT_EXEC); (note PROT_EXEC-only, without PROT_READ/WRITE), the kernel will notice this special case, and will set a special protection key on this memory range. It also sets the appropriate bits in the Protection Keys User Rights (PKRU) register so that the memory becomes unreadable and unwritable. So using protection keys the kernel is able to implement 'true' PROT_EXEC on x86 CPUs: without protection keys PROT_EXEC implies PROT_READ as well. Unreadable executable mappings have security advantages: they cannot be read via information leaks to figure out ASLR details, nor can they be scanned for ROP gadgets - and they cannot be used by exploits for data purposes either. We know about no user-space code that relies on pure PROT_EXEC mappings today, but binary loaders could start making use of this new feature to map binaries and libraries in a more secure fashion. There is other pending pkeys work that offers more high level system call APIs to manage protection keys - but those are not part of this pull request. Right now there's a Kconfig that controls this feature (CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS) that is default enabled (like most x86 CPU feature enablement code that has no runtime overhead), but it's not user-configurable at the moment. If there's any serious problem with this then we can make it configurable and/or flip the default" * 'mm-pkeys-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits) x86/mm/pkeys: Fix mismerge of protection keys CPUID bits mm/pkeys: Fix siginfo ABI breakage caused by new u64 field x86/mm/pkeys: Fix access_error() denial of writes to write-only VMA mm/core, x86/mm/pkeys: Add execute-only protection keys support x86/mm/pkeys: Create an x86 arch_calc_vm_prot_bits() for VMA flags x86/mm/pkeys: Allow kernel to modify user pkey rights register x86/fpu: Allow setting of XSAVE state x86/mm: Factor out LDT init from context init mm/core, x86/mm/pkeys: Add arch_validate_pkey() mm/core, arch, powerpc: Pass a protection key in to calc_vm_flag_bits() x86/mm/pkeys: Actually enable Memory Protection Keys in the CPU x86/mm/pkeys: Add Kconfig prompt to existing config option x86/mm/pkeys: Dump pkey from VMA in /proc/pid/smaps x86/mm/pkeys: Dump PKRU with other kernel registers mm/core, x86/mm/pkeys: Differentiate instruction fetches x86/mm/pkeys: Optimize fault handling in access_error() mm/core: Do not enforce PKEY permissions on remote mm access um, pkeys: Add UML arch_*_access_permitted() methods mm/gup, x86/mm/pkeys: Check VMAs and PTEs for protection keys x86/mm/gup: Simplify get_user_pages() PTE bit handling ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull EFI updates from Ingo Molnar: "The main changes are: - Use separate EFI page tables when executing EFI firmware code. This isolates the EFI context from the rest of the kernel, which has security and general robustness advantages. (Matt Fleming) - Run regular UEFI firmware with interrupts enabled. This is already the status quo under other OSs. (Ard Biesheuvel) - Various x86 EFI enhancements, such as the use of non-executable attributes for EFI memory mappings. (Sai Praneeth Prakhya) - Various arm64 UEFI enhancements. (Ard Biesheuvel) - ... various fixes and cleanups. The separate EFI page tables feature got delayed twice already, because it's an intrusive change and we didn't feel confident about it - third time's the charm we hope!" * 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits) x86/mm/pat: Fix boot crash when 1GB pages are not supported by the CPU x86/efi: Only map kernel text for EFI mixed mode x86/efi: Map EFI_MEMORY_{XP,RO} memory region bits to EFI page tables x86/mm/pat: Don't implicitly allow _PAGE_RW in kernel_map_pages_in_pgd() efi/arm*: Perform hardware compatibility check efi/arm64: Check for h/w support before booting a >4 KB granular kernel efi/arm: Check for LPAE support before booting a LPAE kernel efi/arm-init: Use read-only early mappings efi/efistub: Prevent __init annotations from being used arm64/vmlinux.lds.S: Handle .init.rodata.xxx and .init.bss sections efi/arm64: Drop __init annotation from handle_kernel_image() x86/mm/pat: Use _PAGE_GLOBAL bit for EFI page table mappings efi/runtime-wrappers: Run UEFI Runtime Services with interrupts enabled efi: Reformat GUID tables to follow the format in UEFI spec efi: Add Persistent Memory type name efi: Add NV memory attribute x86/efi: Show actual ending addresses in efi_print_memmap x86/efi/bgrt: Don't ignore the BGRT if the 'valid' bit is 0 efivars: Use to_efivar_entry efi: Runtime-wrapper: Get rid of the rtc_lock spinlock ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull 'objtool' stack frame validation from Ingo Molnar: "This tree adds a new kernel build-time object file validation feature (ONFIG_STACK_VALIDATION=y): kernel stack frame correctness validation. It was written by and is maintained by Josh Poimboeuf. The motivation: there's a category of hard to find kernel bugs, most of them in assembly code (but also occasionally in C code), that degrades the quality of kernel stack dumps/backtraces. These bugs are hard to detect at the source code level. Such bugs result in incorrect/incomplete backtraces most of time - but can also in some rare cases result in crashes or other undefined behavior. The build time correctness checking is done via the new 'objtool' user-space utility that was written for this purpose and which is hosted in the kernel repository in tools/objtool/. The tool's (very simple) UI and source code design is shaped after Git and perf and shares quite a bit of infrastructure with tools/perf (which tooling infrastructure sharing effort got merged via perf and is already upstream). Objtool follows the well-known kernel coding style. Objtool does not try to check .c or .S files, it instead analyzes the resulting .o generated machine code from first principles: it decodes the instruction stream and interprets it. (Right now objtool supports the x86-64 architecture.) From tools/objtool/Documentation/stack-validation.txt: "The kernel CONFIG_STACK_VALIDATION option enables a host tool named objtool which runs at compile time. It has a "check" subcommand which analyzes every .o file and ensures the validity of its stack metadata. It enforces a set of rules on asm code and C inline assembly code so that stack traces can be reliable. Currently it only checks frame pointer usage, but there are plans to add CFI validation for C files and CFI generation for asm files. For each function, it recursively follows all possible code paths and validates the correct frame pointer state at each instruction. It also follows code paths involving special sections, like .altinstructions, __jump_table, and __ex_table, which can add alternative execution paths to a given instruction (or set of instructions). Similarly, it knows how to follow switch statements, for which gcc sometimes uses jump tables." When this new kernel option is enabled (it's disabled by default), the tool, if it finds any suspicious assembly code pattern, outputs warnings in compiler warning format: warning: objtool: rtlwifi_rate_mapping()+0x2e7: frame pointer state mismatch warning: objtool: cik_tiling_mode_table_init()+0x6ce: call without frame pointer save/setup warning: objtool:__schedule()+0x3c0: duplicate frame pointer save warning: objtool:__schedule()+0x3fd: sibling call from callable instruction with changed frame pointer ... so that scripts that pick up compiler warnings will notice them. All known warnings triggered by the tool are fixed by the tree, most of the commits in fact prepare the kernel to be warning-free. Most of them are bugfixes or cleanups that stand on their own, but there are also some annotations of 'special' stack frames for justified cases such entries to JIT-ed code (BPF) or really special boot time code. There are two other long-term motivations behind this tool as well: - To improve the quality and reliability of kernel stack frames, so that they can be used for optimized live patching. - To create independent infrastructure to check the correctness of CFI stack frames at build time. CFI debuginfo is notoriously unreliable and we cannot use it in the kernel as-is without extra checking done both on the kernel side and on the build side. The quality of kernel stack frames matters to debuggability as well, so IMO we can merge this without having to consider the live patching or CFI debuginfo angle" * 'core-objtool-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits) objtool: Only print one warning per function objtool: Add several performance improvements tools: Copy hashtable.h into tools directory objtool: Fix false positive warnings for functions with multiple switch statements objtool: Rename some variables and functions objtool: Remove superflous INIT_LIST_HEAD objtool: Add helper macros for traversing instructions objtool: Fix false positive warnings related to sibling calls objtool: Compile with debugging symbols objtool: Detect infinite recursion objtool: Prevent infinite recursion in noreturn detection objtool: Detect and warn if libelf is missing and don't break the build tools: Support relative directory path for 'O=' objtool: Support CROSS_COMPILE x86/asm/decoder: Use explicitly signed chars objtool: Enable stack metadata validation on 64-bit x86 objtool: Add CONFIG_STACK_VALIDATION option objtool: Add tool to perform compile-time stack metadata validation x86/kprobes: Mark kretprobe_trampoline() stack frame as non-standard sched: Always inline context_switch() ...
-
- 20 Mar, 2016 15 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC driver updates from Arnd Bergmann: "Driver updates for ARM SoCs, these contain various things that touch the drivers/ directory but got merged through arm-soc for practical reasons: - Rockchip rk3368 gains power domain support - Small updates for the ARM spmi driver - The Atmel PMC driver saw a larger rework, touching both arch/arm/mach-at91 and drivers/clk/at91 - All reset controller driver changes alway get merged through arm-soc, though this time the largest change is the addition of a MIPS pistachio reset driver - One bugfix for the NXP (formerly Freescale) i.MX weim bus driver" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits) bus: imx-weim: Take the 'status' property value into account clk: at91: remove useless includes clk: at91: pmc: remove useless capacities handling clk: at91: pmc: drop at91_pmc_base usb: gadget: atmel: access the PMC using regmap ARM: at91: remove useless includes and function prototypes ARM: at91: pm: move idle functions to pm.c ARM: at91: pm: find and remap the pmc ARM: at91: pm: simply call at91_pm_init clk: at91: pmc: move pmc structures to C file clk: at91: pmc: merge at91_pmc_init in atmel_pmc_probe clk: at91: remove IRQ handling and use polling clk: at91: make use of syscon/regmap internally clk: at91: make use of syscon to share PMC registers in several drivers hwmon: (scpi) add energy meter support firmware: arm_scpi: add support for 64-bit sensor values firmware: arm_scpi: decrease Tx timeout to 20ms firmware: arm_scpi: fix send_message and sensor_get_value for big-endian reset: sti: Make reset_control_ops const reset: zynq: Make reset_control_ops const ... -
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC defconfig updates from Arnd Bergmann: "As usual, a bunch of commits, mostly adding drivers and other options to defconfigs. The realview_smp_defconfig and realview_defconfig got merged into one, so we are now down to 110 files. For stm32, we have now added a Kconfig fragment, the first such file on arch/arm. The purpose here is to have a shared defconfig file that works for all boards, while the DRAM offset has to be hardwired on NOMMU machines at compile time. The Exynos defconfig changes depend on changes in the RTC tree, so this is pulled in here, but has already been merged into 4.6 now" * tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits) ARM: imx_v4_v5_defconfig: Enable initramfs support ARM: imx_v4_v5_defconfig: Cleanup imx_v4_v5_defconfig ARM: multi_v7_defconfig: Enable LP872x regulator support ARM: omap2plus_defconfig: Enable LP872x regulator support ARM: mxs_defconfig: Enable initramfs support ARM: mxs_defconfig: Cleanup mxs_defconfig ARM: multi_v5_defconfig: Enable initramfs support ARM: multi_v5_defconfig: Cleanup multi_v5_defconfig ARM: multi_v7_defconfig: enable useful configurations for Vybrid ARM: multi_v7_defconfig: add MACH_ARTPEC6 ARM: omap2plus_defconfig: Enable AT24 eeprom ARM: omap2plus_defconfig: Enable TI TVP5150 video decoder support ARM: omap2plus_defconfig: Enable ISP support and dependencies ARM: omap2plus_defconfig: Enable OMAP IOMMU support ARM: socfpga_defconfig: enable support for initramfs/initrd support ARM: at91/defconfig: add sama5d2 adc support in sama5_defconfig ARM: multi_v7_defconfig: Enable BCM283x ARM: bcm2835_defconfig: Enable RPi power domain driver ARM: bcm2835_defconfig: Enable RPi firmware driver ARM: bcm2835_defconfig: enable ARMv7 support ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM 64-bit DT updates from Arnd Bergmann: "The arm64 device tree changes make up an increasing portion of the overall changes, so they are kept separate from the 32-bit devicetree changes and from the other arm64 updates. Newly added SoCs and boards are: - 96Boards Husky board - AMD Overdrive board - Amlogic S905 SoC and related Tronsmart boxes - Annapurna Labs Alpine family and development board - Broadcom Vulcan servers - Broadcom Northstar 2 SoC - Marvell Armada 3700 family and development board - Qualcomm MSM8996 SoC Additional devices are enabled for existing platforms from Applied Micro, Hisilicon, Mediatek, Qualcomm, and Renesas and there are a couple of other updates for Rockchip, Xilinx and NXP/Freescale" * tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (102 commits) ARM64: dts: amlogic: Add Tronsmart Vega S95 configs Documentation: devicetree: amlogic: Document Tronsmart Vega S95 boards ARM64: dts: Prepare configs for Amlogic Meson GXBaby Documentation: devicetree: amlogic: Document Meson GXBaby devicetree: bindings: Add vendor prefix for Tronsmart arm64: dts: qcom: Fix MPP's function used for LED control arm64: dts: alpine: add the MSIX node in the Alpine v2 dtsi arm64: dts: add the Alpine v2 EVP arm64: dts: marvell: re-order Device Tree nodes for Armada AP806 arm64: dts: marvell: update Armada AP806 clock description arm64: dts: marvell: add Device Tree files for Armada 7K/8K arm64: dts: apm: Add DT node for X-Gene v2 SLIMpro Mailbox I2C Driver arm64: dts: apm: Mailbox device tree node for APM X-Gene v2 platform. arm64: dts: apm: Add DT node for X-Gene v1 SLIMpro Mailbox I2C Driver arm64: dts: apm: mailbox device tree node for APM X-Gene platform. arm64: dts: apm: Update GPIO to control power-off on X-Gene v2 platforms arm64: dts: apm: Update GPIO standby controller DT node for X-Gene v2 platforms arm64: dts: apm: Update GPIO to control power-off on X-Gene v1 platforms arm64: dts: salvator-x: enable USB 2.0 Host of channel 1 and 2 arm64: dts: salvator-x: enable usb2_phy of channel 1 and 2 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM DT updates from Arnd Bergmann: "These are all the updates to device tree files for 32-bit platforms, plus a couple of related 64-bit updates: New SoC support: - Allwinner A83T - Axis Artpec-6 SoC - Mediatek MT7623 SoC - TI Keystone K2G SoC - ST Microelectronics stm32f469 New board or machine support: - ARM Juno R2 - Buffalo Linkstation LS-QVL and LS-GL - Cubietruck plus - D-Link DIR-885L - DT support for ARM RealView PB1176 and PB11MPCore - Google Nexus 7 - Homlet v2 - Itead Ibox - Lamobo R1 - LG Optimus Black - Logicpd dm3730 - Raspberry Pi Model A Other changes include - Lots of updates for Qualcomm APQ8064, MSM8974 and others - Improved support for Nokia N900 and other OMAP machines - Common clk support for lpc32xx - HDLCD display on ARM - Improved stm32f429 support - Improved Renesas device support, r8a779x and others - Lots of Rockchip updates - Samsung cleanups - ADC support for Atmel SAMA5D2 - BCM2835 (Raspberry Pi) improvements - Broadcom Northstar Plus enhancements - OMAP GPMC rework - Several improvements for Atmel SAMA5D2 / Xplained - Global change to remove inofficial "arm,amba-bus" compatible string" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (350 commits) ARM, ARM64: dts: drop "arm,amba-bus" in favor of "simple-bus" ARM: dts: artpec: dual-license on artpec6.dtsi ARM: dts: ux500: add synaptics RMI4 for Ux500 TVK DT arm64: dts: juno/vexpress: fix node name unit-address presence warnings arm64: dts: foundation-v8: add SBSA Generic Watchdog device node ARM: dts: at91: sama5d2 Xplained: add leds node ARM: dts: at91: sama5d2 Xplained: add user push button ARM: dts: at91: sama5d2 Xplained: set pin muxing for usb gadget and usb host ARM: dts: stm32f429: Enable Ethernet on Eval board ARM: dts: omap3-sniper: TWL4030 keypad support Revert "ARM: dts: DRA7: Add dt nodes for PWMSS" ARM: dts: dm814x: dra62x: Disable wait pin monitoring for NAND ARM: dts: dm814x: dra62x: Fix NAND device nodes ARM: dts: stm32f429: Add Ethernet support ARM: dts: stm32f429: Add system config bank node ARM: dts: at91: sama5d2: add nand0 and nfc0 nodes ARM: dts: at91: sama5d2: add dma properties to UART nodes ARM: dts: at91: sama5d2 Xplained: Correct the macb irq pinctrl node ARM: dts: exynos: Don't overheat the Odroid XU3-Lite on high load ARM: dts: exynos: Add cooling levels for Exynos5422/5800 CPUs ... -
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC 64-bit changes from Arnd Bergmann: "Here's our branch of ARM64 contents for this merge window, now containing all ARM64 changes other than device tree files. - Various new platforms get added: * Allwinner A64 SoC * Annapurna Labs Alpine SoCs * Broadcom Vulcan * Marvell Armada 3700 SoCs * Amlogic S905 - Various defconfig changes to enable platform specific drivers This branch includes the clk git tree to resolve a build-time dependency" * tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits) arm64: defconfig: Increase MMC_BLOCK_MINORS to 16 arm64: defconfig: Add Qualcomm sdhci and restart functionality ARM64: Enable Amlogic Meson GXBaby platform arm64: defconfig: Enable Samsung MFD and related configs arm64: alpine: select the Alpine MSI controller driver arm64: defconfig: enable the Alpine family arm64: add Alpine SoC family arm64: defconfig: Enable exynos thermal config arm64: add defconfig options for Allwinner SoCs arm64: defconfig: Enable DesignWare APB GPIO controller arm64: defconfig: Add Renesas R-Car Gen3 USB 2.0 phy driver support arm64: EXYNOS: Consolidate ARCH_EXYNOS7 symbol into ARCH_EXYNOS clk: samsung: Don't build ARMv8 clock drivers on ARMv7 MAINTAINERS: Add entry for Broadcom Vulcan SoC arm64: cputype info for Broadcom Vulcan arm64: Broadcom Vulcan support arm64: defconfig: Add Broadcom Vulcan to defconfig arm64: update ARCH_MVEBU for Marvell Armada 7K/8K support Documentation: arm: add Marvell Armada 7K and 8K families Documentation: arm: add link to Armada 38x Functional Spec ... -
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC platform updates from Arnd Bergmann: "Newly added support for additional SoCs: - Axis Artpec-6 SoC family - Allwinner A83T SoC - Mediatek MT7623 - NXP i.MX6QP SoC - ST Microelectronics stm32f469 microcontroller New features: - SMP support for Mediatek mt2701 - Big-endian support for NXP i.MX - DaVinci now uses the new DMA engine dma_slave_map - OMAP now uses the new DMA engine dma_slave_map - earlyprintk support for palmchip uart on mach-tango - delay timer support for orion Other: - Exynos PMU driver moved out to drivers/soc/ - Various smaller updates for Renesas, Xilinx, PXA, AT91, OMAP, uniphier" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits) ARM: uniphier: rework SMP code to support new System Bus binding ARM: uniphier: add missing of_node_put() ARM: at91: avoid defining CONFIG_* symbols in source code ARM: DRA7: hwmod: Add data for eDMA tpcc, tptc0, tptc1 ARM: imx: Make reset_control_ops const ARM: imx: Do L2 errata only if the L2 cache isn't enabled ARM: imx: select ARM_CPU_SUSPEND only for imx6 dmaengine: pxa_dma: fix the maximum requestor line ARM: alpine: select the Alpine MSI controller driver ARM: pxa: add the number of DMA requestor lines dmaengine: mmp-pdma: add number of requestors dma: mmp_pdma: Add the #dma-requests DT property documentation ARM: OMAP2+: Add rtc hwmod configuration for ti81xx ARM: s3c24xx: Avoid warning for inb/outb ARM: zynq: Move early printk virtual address to vmalloc area ARM: DRA7: hwmod: Add custom reset handler for PCIeSS ARM: SAMSUNG: Remove unused register offset definition ARM: EXYNOS: Cleanup header files inclusion drivers: soc: samsung: Enable COMPILE_TEST MAINTAINERS: Add maintainers entry for drivers/soc/samsung ... -
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC cleanups from Arnd Bergmann: "A few simple cleanups across multiple platforms, not much standing out: - lpc32xx removes its private implementation of the clk API, after generic code was merged in 4.5 - all unused Makefile.boot files get removed - a number of simplifications for shmobile - asm/clkdev.h gets replaced with the asm-generic version after all mach/clkdev.h implementations are gone" * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: shmobile: Kconfig: Get rid of old comment ARM: shmobile: Consolidate SCU mapping code arm: lpc32xx: remove direct control of GPIOs from shared mach file arm: lpc32xx: remove selected HAVE_IDE arm: lpc32xx: switch to common clock framework ARM: Use generic clkdev.h header ARM: plat-versatile: Remove unused clock.c file ARM: netx: remove redundant "depends on ARCH_NETX" ARM: integrator: remove redundant select in Kconfig ARM: drop unused Makefile.boot of Multiplatform SoCs ARM: mvebu: add missing of_node_put() ARM: shmobile: r8a7779: Remove remainings of removed SCU boot setup code ARM: shmobile: Typo s/MIPDR/MPIDR/ ARM: shmobile: Add includes providing forward declarations ARM: shmobile: rcar-gen2: Make rcar_gen2_dma_contiguous static ARM: mv78xx0: use "depends on" instead of "if" after prompt -
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC non-urgent fixes from Arnd Bergmann: "As usual, we queue up a few fixes that don't seem urgent enough to go in through -rc. - a number of randconfig warning fixes from Arnd - various small fixes for OMAP - one somewhat larger patch to restore the OMAP3 cpuidle tuning that was lost in a cleanup - a small regression fix for cns3xxx PCI" * tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits) CNS3xxx: Fix PCI cns3xxx_write_config() MAINTAINERS: unify email addrs for Kevin Hilman CNS3xxx: remove unused *_VIRT definitions ARM: OMAP2+: Fix hwmod clock for l4_ls soc: TI knav_qmss: fix dma_addr_t printing ARM: prima2: always enable reset controller ARM: socfpga: hide unused functions ARM: ux500: fix ureachable iounmap() ARM: ks8695: fix __initdata annotation ARM: mvebu: mark mvebu_hwcc_pci_nb as __maybe_unused ARM: mv78xx0: avoid unused function warning ARM: orion: only select I2C_BOARDINFO when using I2C ARM: OMAP2+: Fix out of range register access with syscon_config.max_register ARM: OMAP3: Add cpuidle parameters table for omap3430 ARM: davinci: make I2C support optional ARM: davinci: DA8xx+DMx combined kernels need PATCH_PHYS_VIRT ARM: davinci: avoid unused mityomapl138_pn_info variable ARM: davinci: limit DT support to DA850 ARM: DRA7: hwmod: Add reset data for PCIe ARM: DRA7: hwmod: Fix OCP2SCP sysconfig ... -
Ard Biesheuvel authored
Commit 2213e9a6 ("kallsyms: add support for relative offsets in kallsyms address table") changed the default kallsyms symbol table format to use relative references rather than absolute addresses. This reduces the size of the kallsyms symbol table by 50% on 64-bit architectures, and further reduces the size of the relocation tables used by relocatable kernels. Since the memory footprint of the static kernel image is always much smaller than 4 GB, these relative references are assumed to be representable in 32 bits, even when the native word size is 64 bits. On 64-bit architectures, this obviously only works if the distance between each relative reference and the chosen anchor point is representable in 32 bits, and so the table generation code in scripts/kallsyms.c scans the table for the lowest value that is covered by the kernel text, and selects it as the anchor point. However, when using the GOLD linker rather than the default BFD linker to build the x86_64 kernel, the symbol phys_offset_64, which is the result of arithmetic defined in the linker script, is emitted as a 'T' rather than an 'A' type symbol, resulting in scripts/kallsyms.c to mistake it for a suitable anchor point, even though it is far away from the actual kernel image in the virtual address space. This results in out-of-range warnings from scripts/kallsyms.c and a broken build. So let's align with the BFD linker, and emit the phys_offset_[32|64] symbols as absolute symbols explicitly. Note that the out of range issue does not exist on 32-bit x86, but this patch changes both symbols for symmetry. Reported-by:
Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Kees Cook <keescook@chromium.org> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull virtio/vhost updates from Michael Tsirkin: "New features, performance improvements, cleanups: - basic polling support for vhost - rework virtio to optionally use DMA API, fixing it on Xen - balloon stats gained a new entry - using the new napi_alloc_skb speeds up virtio net - virtio blk stats can now be read while another VCPU is busy inflating or deflating the balloon plus misc cleanups in various places" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_net: replace netdev_alloc_skb_ip_align() with napi_alloc_skb() vhost_net: basic polling support vhost: introduce vhost_vq_avail_empty() vhost: introduce vhost_has_work() virtio_balloon: Allow to resize and update the balloon stats in parallel virtio_balloon: Use a workqueue instead of "vballoon" kthread virtio/s390: size of SET_IND payload virtio/s390: use dev_to_virtio vhost: rename vhost_init_used() vhost: rename cross-endian helpers virtio_blk: VIRTIO_BLK_F_WCE->VIRTIO_BLK_F_FLUSH vring: Use the DMA API on Xen virtio_pci: Use the DMA API if enabled virtio_mmio: Use the DMA API if enabled virtio: Add improved queue allocation API virtio_ring: Support DMA APIs vring: Introduce vring_use_dma_api() s390/dma: Allow per device dma ops alpha/dma: use common noop dma ops dma: Provide simple noop dma ops -
git://git.linaro.org/landing-teams/working/fujitsu/integrationLinus Torvalds authored
Pull mailbox updates from Jassi Brar: - mailbox bindings and drivers for * APM X-Gene * Hisilicon Hi6220 * Rockchip RK3368 platforms - minor fixes to the above three drivers. - misc cleanups of mailbox-test driver. * 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: rockchip: avoid 64-bit division mailbox: rockchip: Add Rockchip mailbox driver dt-bindings: rockchip-mailbox: Add mailbox controller document on Rockchip SoCs mailbox/xgene-slimpro: Checking for IS_ERR instead of NULL mailbox: Hi6220: add mailbox driver dt-bindings: mailbox: Document Hi6220 mailbox driver mailbox: mailbox-test: add support for separate tx/rx buffer with single channel mailbox: mailbox-test: use print_hex_dump_bytes to allow dynamic printk mailbox: mailbox-test: fix the compatible string mailbox: mailbox-test: rename driver as generic test driver Documentation: mailbox: Add APM X-Gene SLIMpro mailbox dts documentation mailbox: Add support for APM X-Gene platform mailbox driver -
git://github.com/czankel/xtensa-linuxLinus Torvalds authored
Pull Xtensa updates from Chris Zankel: "Xtensa improvements for 4.6: - control whether perf IRQ is treated as NMI from Kconfig - implement ioremap for regions outside KIO segment - fix ISS serial port behaviour when EOF is reached - fix preemption in {clear,copy}_user_highpage - fix endianness issues for XTFPGA devices, big-endian cores are now fully functional - clean up debug infrastructure and add support for hardware breakpoints and watchpoints - add processor configurations for Three Core HiFi-2 MX and HiFi3 cpus" * tag 'xtensa-next-20160320' of git://github.com/czankel/xtensa-linux: xtensa: add test_kc705_hifi variant xtensa: add Three Core HiFi-2 MX Variant. xtensa: support hardware breakpoints/watchpoints xtensa: use context structure for debug exceptions xtensa: remove remaining non-functional KGDB bits xtensa: clear all DBREAKC registers on start xtensa: xtfpga: fix earlycon endianness xtensa: xtfpga: fix i2c controller register width and endianness xtensa: xtfpga: fix ethernet controller endianness xtensa: xtfpga: fix serial port register width and endianness xtensa: define CONFIG_CPU_{BIG,LITTLE}_ENDIAN xtensa: fix preemption in {clear,copy}_user_highpage xtensa: ISS: don't hang if stdin EOF is reached xtensa: support ioremap for memory outside KIO region xtensa: use XTENSA_INT_LEVEL macro in asm/timex.h xtensa: make fake NMI configurable -
git://www.linux-watchdog.org/linux-watchdogLinus Torvalds authored
Pull watchdog updates from Wim Van Sebroeck: - new drivers for: NI 903x/913x watchdog driver, WinSystems EBC-C384 watchdog timer and ARM SBSA watchdog driver - Support for NCT6102D devices - Improvements of the generic watchdog framework (improve restart handler, make set_timeout optional, introduce infrastructure triggered keepalives, ... - improvements on the pnx4008 watchdog driver - several smaller fixes and improvements * git://www.linux-watchdog.org/linux-watchdog: (28 commits) watchdog: Ensure that wdd is not dereferenced if NULL watchdog: imx2: Convert to use infrastructure triggered keepalives watchdog: dw_wdt: Convert to use watchdog infrastructure watchdog: Add support for minimum time between heartbeats watchdog: Make stop function optional watchdog: Introduce WDOG_HW_RUNNING flag watchdog: Introduce hardware maximum heartbeat in watchdog core watchdog: Make set_timeout function optional arm: lpc32xx: remove restart handler arm: lpc32xx: phy3250 remove restart hook watchdog: pnx4008: restart: support "cmd" from userspace watchdog: pnx4008: add support for soft reset watchdog: pnx4008: add restart handler watchdog: pnx4008: update logging during power-on watchdog: tangox_wdt: test clock rate to avoid division by 0 watchdog: atlas7_wdt: test clock rate to avoid division by 0 watchdog: s3c2410_wdt: Add max and min timeout values Watchdog: introduce ARM SBSA watchdog driver Documentation: add sbsa-gwdt driver documentation watchdog: Add watchdog timer support for the WinSystems EBC-C384 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394Linus Torvalds authored
Pull firewire updates from Stefan Richter: "IEEE 1394 subsystem patches: - move away from outmoded timekeeping API - error reporting fix - documentation bits" * tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: ABI documentation: libhinawa uses firewire-cdev firewire: ABI documentation: jujuutils were renamed to linux-firewire-utils firewire: ohci: propagate return code from soft_reset to probe and resume firewire: nosy: Replace timeval with timespec64
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs updates from Al Viro: - Preparations of parallel lookups (the remaining main obstacle is the need to move security_d_instantiate(); once that becomes safe, the rest will be a matter of rather short series local to fs/*.c - preadv2/pwritev2 series from Christoph - assorted fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (32 commits) splice: handle zero nr_pages in splice_to_pipe() vfs: show_vfsstat: do not ignore errors from show_devname method dcache.c: new helper: __d_add() don't bother with __d_instantiate(dentry, NULL) untangle fsnotify_d_instantiate() a bit uninline d_add() replace d_add_unique() with saner primitive quota: use lookup_one_len_unlocked() cifs_get_root(): use lookup_one_len_unlocked() nfs_lookup: don't bother with d_instantiate(dentry, NULL) kill dentry_unhash() ceph_fill_trace(): don't bother with d_instantiate(dn, NULL) autofs4: don't bother with d_instantiate(dentry, NULL) in ->lookup() configfs: move d_rehash() into configfs_create() for regular files ceph: don't bother with d_rehash() in splice_dentry() namei: teach lookup_slow() to skip revalidate namei: massage lookup_slow() to be usable by lookup_one_len_unlocked() lookup_one_len_unlocked(): use lookup_dcache() namei: simplify invalidation logics in lookup_dcache() namei: change calling conventions for lookup_{fast,slow} and follow_managed() ...
-
