Pull cifs fixes from Steve French:
 "Three SMB3 fixes.

  Two for stable, and the other fixes a problem pointed out with a
  recently added ioctl"

* tag '5.13-rc4-smb3' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: change format of CIFS_FULL_KEY_DUMP ioctl
  cifs: fix string declarations and assignments in tracepoints
  cifs: set server->cipher_type to AES-128-CCM for SMB3.0

Pull NFS client bugfixes from Trond Myklebust:
"Stable fixes:
   - Fix v4.0/v4.1 SEEK_DATA return -ENOTSUPP when set NFS_V4_2 config
   - Fix Oops in xs_tcp_send_request() when transport is disconnected
   - Fix a NULL pointer dereference in pnfs_mark_matching_lsegs_return()

  Bugfixes:
   - Fix instances where signal_pending() should be fatal_signal_pending()
   - fix an incorrect limit in filelayout_decode_layout()
   - Fixes for the SUNRPC backlogged RPC queue
   - Don't corrupt the value of pg_bytes_written in nfs_do_recoalesce()
   - Revert commit 586a0787 ("Clean up rpcrdma_prepare_readch()")"

* tag 'nfs-for-5.13-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  nfs: Remove trailing semicolon in macros
  xprtrdma: Revert 586a0787
  NFSv4: Fix v4.0/v4.1 SEEK_DATA return -ENOTSUPP when set NFS_V4_2 config
  NFS: Clean up reset of the mirror accounting variables
  NFS: Don't corrupt the value of pg_bytes_written in nfs_do_recoalesce()
  NFS: Fix an Oopsable condition in __nfs_pageio_add_request()
  SUNRPC: More fixes for backlog congestion
  SUNRPC: Fix Oops in xs_tcp_send_request() when transport is disconnected
  NFSv4: Fix a NULL pointer dereference in pnfs_mark_matching_lsegs_return()
  SUNRPC in case of backlog, hand free slots directly to waiting task
  pNFS/NFSv4: Remove redundant initialization of 'rd_size'
  NFS: fix an incorrect limit in filelayout_decode_layout()
  fs/nfs: Use fatal_signal_pending instead of signal_pending

Pull sound fixes from Takashi Iwai:
 "A slightly high volume at this time due to pending ASoC fixes.

  While there are a few generic simple-card fixes for regressions, most
  of the changes are device-specific fixes: ASoC Intel SOF, codec
  clocks, other codec / platform fixes as well as usual HD-audio and
  USB-audio"

* tag 'sound-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (37 commits)
  ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Zbook Fury 17 G8
  ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Zbook Fury 15 G8
  ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Zbook G8
  ALSA: hda/realtek: fix mute/micmute LEDs for HP 855 G8
  ALSA: hda/realtek: Chain in pop reduction fixup for ThinkStation P340
  ALSA: usb-audio: scarlett2: snd_scarlett_gen2_controls_create() can be static
  ALSA: hda/realtek: the bass speaker can't output sound on Yoga 9i
  ALSA: hda/realtek: Headphone volume is controlled by Front mixer
  ALSA: usb-audio: scarlett2: Improve driver startup messages
  ALSA: usb-audio: scarlett2: Fix device hang with ehci-pci
  ALSA: usb-audio: fix control-request direction
  ASoC: qcom: lpass-cpu: Use optional clk APIs
  ASoC: cs35l33: fix an error code in probe()
  ASoC: SOF: Intel: hda: don't send DAI_CONFIG IPC for older firmware
  ASoC: fsl: fix SND_SOC_IMX_RPMSG dependency
  ASoC: cs42l52: Minor tidy up of error paths
  ASoC: cs35l32: Add missing regmap use_single config
  ASoC: cs35l34: Add missing regmap use_single config
  ASoC: cs42l73: Add missing regmap use_single config
  ASoC: cs53l30: Add missing regmap use_single config
  ...

Pull clang feature fixes from Kees Cook:

 - Correctly pass stack frame size checking under LTO (Nick Desaulniers)

 - Avoid CFI mismatches by checking initcall_t types (Marco Elver)

* tag 'clang-features-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  Makefile: LTO: have linker check -Wframe-larger-than
  init: verify that function is initcall_t at compile-time

Pull MIPS fixes from Thomas Bogendoerfer:

 - fix function/preempt trace hangs

 - a few build fixes

* tag 'mips-fixes_5.13_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: Fix kernel hang under FUNCTION_GRAPH_TRACER and PREEMPT_TRACER
  MIPS: ralink: export rt_sysc_membase for rt2880_wdt.c
  MIPS: launch.h: add include guard to prevent build errors
  MIPS: alchemy: xxs1500: add gpio-au1000.h header file

Pull percpu fixes from Dennis Zhou:
 "This contains a cleanup to lib/percpu-refcount.c and an update to the
  MAINTAINERS file to more formally take over support for lib/percpu*"

* 'for-5.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
  MAINTAINERS: Add lib/percpu* as part of percpu entry
  percpu_ref: Don't opencode percpu_ref_is_dying

Pull arm64 fixes from Catalin Marinas:

 - Don't use contiguous or block mappings for the linear map when KFENCE
   is enabled.

 - Fix link in the arch_counter_enforce_ordering() comment.

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: mm: don't use CON and BLK mapping if KFENCE is enabled
  arm64: Fix stale link in the arch_counter_enforce_ordering() comment

Merge tag 'for-5.13/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Fix DM verity target's 'require_signatures' module_param permissions.

 - Revert DM snapshot fix from v5.13-rc3 and then properly fix crash
   when an origin has no snapshots. This allows only the proper fix to
   go to stable@ (since the original fix was successfully dropped).

* tag 'for-5.13/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm snapshot: properly fix a crash when an origin has no snapshots
  dm snapshot: revert "fix a crash when an origin has no snapshots"
  dm verity: fix require_signatures module_param permissions

Make CIFS_FULL_KEY_DUMP ioctl able to return variable-length keys.

* userspace needs to pass the struct size along with optional
  session_id and some space at the end to store keys
* if there is enough space kernel returns keys in the extra space and
  sets the length of each key via xyz_key_length fields

This also fixes the build error for get_user() on ARM.

Sample program:

	#include <stdlib.h>
	#include <stdio.h>
	#include <stdint.h>
	#include <sys/fcntl.h>
	#include <sys/ioctl.h>

	struct smb3_full_key_debug_info {
	        uint32_t   in_size;
	        uint64_t   session_id;
	        uint16_t   cipher_type;
	        uint8_t    session_key_length;
	        uint8_t    server_in_key_length;
	        uint8_t    server_out_key_length;
	        uint8_t    data[];
	        /*
	         * return this struct with the keys appended at the end:
	         * uint8_t session_key[session_key_length];
	         * uint8_t server_in_key[server_in_key_length];
	         * uint8_t server_out_key[server_out_key_length];
	         */
	} __attribute__((packed));

	#define CIFS_IOCTL_MAGIC 0xCF
	#define CIFS_DUMP_FULL_KEY _IOWR(CIFS_IOCTL_MAGIC, 10, struct smb3_full_key_debug_info)

	void dump(const void *p, size_t len) {
	        const char *hex = "0123456789ABCDEF";
	        const uint8_t *b = p;
	        for (int i = 0; i < len; i++)
	                printf("%c%c ", hex[(b[i]>>4)&0xf], hex[b[i]&0xf]);
	        putchar('\n');
	}

	int main(int argc, char **argv)
	{
	        struct smb3_full_key_debug_info *keys;
	        uint8_t buf[sizeof(*keys)+1024] = {0};
	        size_t off = 0;
	        int fd, rc;

	        keys = (struct smb3_full_key_debug_info *)&buf;
	        keys->in_size = sizeof(buf);

	        fd = open(argv[1], O_RDONLY);
	        if (fd < 0)
	                perror("open"), exit(1);

	        rc = ioctl(fd, CIFS_DUMP_FULL_KEY, keys);
	        if (rc < 0)
	                perror("ioctl"), exit(1);

	        printf("SessionId      ");
	        dump(&keys->session_id, 8);
	        printf("Cipher         %04x\n", keys->cipher_type);

	        printf("SessionKey     ");
	        dump(keys->data+off, keys->session_key_length);
	        off += keys->session_key_length;

	        printf("ServerIn Key   ");
	        dump(keys->data+off, keys->server_in_key_length);
	        off += keys->server_in_key_length;

	        printf("ServerOut Key  ");
	        dump(keys->data+off, keys->server_out_key_length);

	        return 0;
	}

Usage:

	$ gcc -o dumpkeys dumpkeys.c

Against Windows Server 2020 preview (with AES-256-GCM support):

	# mount.cifs //$ip/test /mnt -o "username=administrator,password=foo,vers=3.0,seal"
	# ./dumpkeys /mnt/somefile
	SessionId      0D 00 00 00 00 0C 00 00
	Cipher         0002
	SessionKey     AB CD CC 0D E4 15 05 0C 6F 3C 92 90 19 F3 0D 25
	ServerIn Key   73 C6 6A C8 6B 08 CF A2 CB 8E A5 7D 10 D1 5B DC
	ServerOut Key  6D 7E 2B A1 71 9D D7 2B 94 7B BA C4 F0 A5 A4 F8
	# umount /mnt

	With 256 bit keys:

	# echo 1 > /sys/module/cifs/parameters/require_gcm_256
	# mount.cifs //$ip/test /mnt -o "username=administrator,password=foo,vers=3.11,seal"
	# ./dumpkeys /mnt/somefile
	SessionId      09 00 00 00 00 0C 00 00
	Cipher         0004
	SessionKey     93 F5 82 3B 2F B7 2A 50 0B B9 BA 26 FB 8C 8B 03
	ServerIn Key   6C 6A 89 B2 CB 7B 78 E8 04 93 37 DA 22 53 47 DF B3 2C 5F 02 26 70 43 DB 8D 33 7B DC 66 D3 75 A9
	ServerOut Key  04 11 AA D7 52 C7 A8 0F ED E3 93 3A 65 FE 03 AD 3F 63 03 01 2B C0 1B D7 D7 E5 52 19 7F CC 46 B4
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

We missed using the variable length string macros in several
tracepoints. Fixed them in this change.

There's probably more useful macros that we can use to print
others like flags etc. But I'll submit sepawrate patches for
those at a future date.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: <stable@vger.kernel.org> # v5.12
Signed-off-by: Steve French <stfrench@microsoft.com>

SMB3.0 doesn't have encryption negotiate context but simply uses
the SMB2_GLOBAL_CAP_ENCRYPTION flag.

When that flag is present in the neg response cifs.ko uses AES-128-CCM
which is the only cipher available in this context.

cipher_type was set to the server cipher only when parsing encryption
negotiate context (SMB3.1.1).

For SMB3.0 it was set to 0. This means cipher_type value can be 0 or 1
for AES-128-CCM.

Fix this by checking for SMB3.0 and encryption capability and setting
cipher_type appropriately.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

Pull ACPI fix from Rafael Wysocki:
 "Fix a recent ACPI power management regression causing boot issues to
  occur on some systems due to attempts to turn off ACPI power resources
  that are already off (which should work according to the ACPI
  specification)"

* tag 'acpi-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: power: Refine turning off unused power resources

Pull iommu fixes from Joerg Roedel:

 - Important fix for the AMD IOMMU driver in the recently added
   page-specific invalidation code to fix a calculation.

 - Fix a NULL-ptr dereference in the AMD IOMMU driver when a device
   switches domain types.

 - Fixes for the Intel VT-d driver to check for allocation failure and
   do correct cleanup.

 - Another fix for Intel VT-d to not allow supervisor page requests from
   devices when using second level page translation.

 - Add a MODULE_DEVICE_TABLE to the VIRTIO IOMMU driver

* tag 'iommu-fixes-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/vt-d: Fix sysfs leak in alloc_iommu()
  iommu/vt-d: Use user privilege for RID2PASID translation
  iommu/vt-d: Check for allocation failure in aux_detach_device()
  iommu/virtio: Add missing MODULE_DEVICE_TABLE
  iommu/amd: Fix wrong parentheses on page-specific invalidations
  iommu/amd: Clear DMA ops when switching domain

Fix rename of one directory over another such that the nlink on the deleted
directory is cleared to 0 rather than being decremented to 1.

This was causing the generic/035 xfstest to fail.

Fixes: e49c7b2f ("afs: Build an abstraction around an "operation" concept")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/162194384460.3999479.7605572278074191079.stgit@warthog.procyon.org.uk/ # v1
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

iommu_device_sysfs_add() is called before, so is has to be cleaned on subsequent
errors.

Fixes: 39ab9555 ("iommu: Add sysfs bindings for struct iommu_device")
Cc: stable@vger.kernel.org # 4.11.x
Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/17411490.HIIP88n32C@mobilepool36.emlix.com
Link: https://lore.kernel.org/r/20210525070802.361755-2-baolu.lu@linux.intel.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

Macros should not use a trailing semicolon.
Signed-off-by: Huilong Deng <denghuilong@cdjrlc.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Commit 9ed5af26 ("SUNRPC: Clean up the handling of page padding
in rpc_prepare_reply_pages()") [Dec 2020] affects RPC Replies that
have a data payload (i.e., Write chunks).

rpcrdma_prepare_readch(), as its name suggests, sets up Read chunks
which are data payloads within RPC Calls. Those payloads are
constructed by xdr_write_pages(), which continues to stuff the call
buffer's tail kvec with the payload's XDR roundup. Thus removing
the tail buffer logic in rpcrdma_prepare_readch() was the wrong
thing to do.

Fixes: 586a0787 ("xprtrdma: Clean up rpcrdma_prepare_readch()")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Since commit bdcc2cd1 ("NFSv4.2: handle NFS-specific llseek errors"),
nfs42_proc_llseek would return -EOPNOTSUPP rather than -ENOTSUPP when
SEEK_DATA on NFSv4.0/v4.1.

This will lead xfstests generic/285 not run on NFSv4.0/v4.1 when set the
CONFIG_NFS_V4_2, rather than run failed.

Fixes: bdcc2cd1 ("NFSv4.2: handle NFS-specific llseek errors")
Cc: <stable.vger.kernel.org> # 4.2
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

The HP ZBook Studio 17.3 Inch G8 is using ALC285 codec which is
using 0x04 to control mute LED and 0x01 to control micmute LED.
In the other hand, there is no output from right channel of speaker.
Therefore, add a quirk to make it works.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210519170357.58410-4-jeremy.szu@canonical.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

The HP ZBook Fury 15.6 Inch G8 is using ALC285 codec which is
using 0x04 to control mute LED and 0x01 to control micmute LED.
In the other hand, there is no output from right channel of speaker.
Therefore, add a quirk to make it works.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210519170357.58410-3-jeremy.szu@canonical.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

The HP ZBook Studio 15.6 Inch G8 is using ALC285 codec which is
using 0x04 to control mute LED and 0x01 to control micmute LED.
In the other hand, there is no output from right channel of speaker.
Therefore, add a quirk to make it works.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210519170357.58410-2-jeremy.szu@canonical.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

The HP EliteBook 855 G8 Notebook PC is using ALC285 codec which needs
ALC285_FIXUP_HP_MUTE_LED fixup to make it works. After applying the
fixup, the mute/micmute LEDs work good.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210519170357.58410-1-jeremy.szu@canonical.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Pull networking fixes from Jakub Kicinski:
 "Networking fixes for 5.13-rc4, including fixes from bpf, netfilter,
  can and wireless trees. Notably including fixes for the recently
  announced "FragAttacks" WiFi vulnerabilities. Rather large batch,
  touching some core parts of the stack, too, but nothing hair-raising.

  Current release - regressions:

   - tipc: make node link identity publish thread safe

   - dsa: felix: re-enable TAS guard band mode

   - stmmac: correct clocks enabled in stmmac_vlan_rx_kill_vid()

   - stmmac: fix system hang if change mac address after interface
     ifdown

  Current release - new code bugs:

   - mptcp: avoid OOB access in setsockopt()

   - bpf: Fix nested bpf_bprintf_prepare with more per-cpu buffers

   - ethtool: stats: fix a copy-paste error - init correct array size

  Previous releases - regressions:

   - sched: fix packet stuck problem for lockless qdisc

   - net: really orphan skbs tied to closing sk

   - mlx4: fix EEPROM dump support

   - bpf: fix alu32 const subreg bound tracking on bitwise operations

   - bpf: fix mask direction swap upon off reg sign change

   - bpf, offload: reorder offload callback 'prepare' in verifier

   - stmmac: Fix MAC WoL not working if PHY does not support WoL

   - packetmmap: fix only tx timestamp on request

   - tipc: skb_linearize the head skb when reassembling msgs

  Previous releases - always broken:

   - mac80211: address recent "FragAttacks" vulnerabilities

   - mac80211: do not accept/forward invalid EAPOL frames

   - mptcp: avoid potential error message floods

   - bpf, ringbuf: deny reserve of buffers larger than ringbuf to
     prevent out of buffer writes

   - bpf: forbid trampoline attach for functions with variable arguments

   - bpf: add deny list of functions to prevent inf recursion of tracing
     programs

   - tls splice: check SPLICE_F_NONBLOCK instead of MSG_DONTWAIT

   - can: isotp: prevent race between isotp_bind() and
     isotp_setsockopt()

   - netfilter: nft_set_pipapo_avx2: Add irq_fpu_usable() check,
     fallback to non-AVX2 version

  Misc:

   - bpf: add kconfig knob for disabling unpriv bpf by default"

* tag 'net-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (172 commits)
  net: phy: Document phydev::dev_flags bits allocation
  mptcp: validate 'id' when stopping the ADD_ADDR retransmit timer
  mptcp: avoid error message on infinite mapping
  mptcp: drop unconditional pr_warn on bad opt
  mptcp: avoid OOB access in setsockopt()
  nfp: update maintainer and mailing list addresses
  net: mvpp2: add buffer header handling in RX
  bnx2x: Fix missing error code in bnx2x_iov_init_one()
  net: zero-initialize tc skb extension on allocation
  net: hns: Fix kernel-doc
  sctp: fix the proc_handler for sysctl encap_port
  sctp: add the missing setting for asoc encap_port
  bpf, selftests: Adjust few selftest result_unpriv outcomes
  bpf: No need to simulate speculative domain for immediates
  bpf: Fix mask direction swap upon off reg sign change
  bpf: Wrap aux data inside bpf_sanitize_info container
  bpf: Fix BPF_LSM kconfig symbol dependency
  selftests/bpf: Add test for l3 use of bpf_redirect_peer
  bpftool: Add sock_release help info for cgroup attach/prog load command
  net: dsa: microchip: enable phy errata workaround on 9567
  ...

Document the phydev::dev_flags bit allocation to allow bits 15:0 to
define PHY driver specific behavior, bits 23:16 to be reserved for now,
and bits 31:24 to hold generic PHY driver flags.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20210526184617.3105012-1-f.fainelli@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull MTD fixes from Miquel Raynal:
 "MTD parsers:
   - Fix ofpart subpartitions parsing

  Raw NAND:
   - Fix external use of SW Hamming ECC helper (txx9ndfmc, tmio,
     sharpsl, ndfc, lpc32xx_slc, fsmc, cs553x)"

* tag 'mtd/fixes-for-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: parsers: ofpart: fix parsing subpartitions
  mtd: rawnand: txx9ndfmc: Fix external use of SW Hamming ECC helper
  mtd: rawnand: tmio: Fix external use of SW Hamming ECC helper
  mtd: rawnand: sharpsl: Fix external use of SW Hamming ECC helper
  mtd: rawnand: ndfc: Fix external use of SW Hamming ECC helper
  mtd: rawnand: lpc32xx_slc: Fix external use of SW Hamming ECC helper
  mtd: rawnand: fsmc: Fix external use of SW Hamming ECC helper
  mtd: rawnand: cs553x: Fix external use of SW Hamming ECC helper

Now that nfs_pageio_do_add_request() resets the pg_count, we don't need
these other inlined resets.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

The value of mirror->pg_bytes_written should only be updated after a
successful attempt to flush out the requests on the list.

Fixes: a7d42ddb ("nfs: add mirroring support to pgio layer")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Ensure that nfs_pageio_error_cleanup() resets the mirror array contents,
so that the structure reflects the fact that it is now empty.
Also change the test in nfs_pageio_do_add_request() to be more robust by
checking whether or not the list is empty rather than relying on the
value of pg_count.

Fixes: a7d42ddb ("nfs: add mirroring support to pgio layer")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Ensure that we fix the XPRT_CONGESTED starvation issue for RDMA as well
as socket based transports.
Ensure we always initialise the request after waking up from the backlog
list.

Fixes: e877a88d ("SUNRPC in case of backlog, hand free slots directly to waiting task")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Daniel Borkmann says:

====================
pull-request: bpf 2021-05-26

The following pull-request contains BPF updates for your *net* tree.

We've added 14 non-merge commits during the last 14 day(s) which contain
a total of 17 files changed, 513 insertions(+), 231 deletions(-).

The main changes are:

1) Fix bpf_skb_change_head() helper to reset mac_len, from Jussi Maki.

2) Fix masking direction swap upon off-reg sign change, from Daniel Borkmann.

3) Fix BPF offloads in verifier by reordering driver callback, from Yinjun Zhang.

4) BPF selftest for ringbuf mmap ro/rw restrictions, from Andrii Nakryiko.

5) Follow-up fixes to nested bprintf per-cpu buffers, from Florent Revest.

6) Fix bpftool sock_release attach point help info, from Liu Jian.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Mat Martineau says:

====================
MPTCP fixes

Here are a few fixes for the -net tree.

Patch 1 fixes an attempt to access a tcp-specific field that does not
exist in mptcp sockets.

Patches 2 and 3 remove warning/error log output that could be flooded.

Patch 4 performs more validation on address advertisement echo packets
to improve RFC 8684 compliance.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

when Linux receives an echo-ed ADD_ADDR, it checks the IP address against
the list of "announced" addresses. In case of a positive match, the timer
that handles retransmissions is stopped regardless of the 'Address Id' in
the received packet: this behaviour does not comply with RFC8684 3.4.1.

Fix it by validating the 'Address Id' in received echo-ed ADD_ADDRs.
Tested using packetdrill, with the following captured output:

 unpatched kernel:

 Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0xfd2e62517888fe29,mptcp dss ack 3007449509], length 0
 In  <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 1 1.2.3.4,mptcp dss ack 3013740213], length 0
 Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0xfd2e62517888fe29,mptcp dss ack 3007449509], length 0
 In  <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 90 198.51.100.2,mptcp dss ack 3013740213], length 0
        ^^^ retransmission is stopped here, but 'Address Id' is 90

 patched kernel:

 Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0x1cf372d59e05f4b8,mptcp dss ack 3007449509], length 0
 In  <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 1 1.2.3.4,mptcp dss ack 1672384568], length 0
 Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0x1cf372d59e05f4b8,mptcp dss ack 3007449509], length 0
 In  <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 90 198.51.100.2,mptcp dss ack 1672384568], length 0
 Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0x1cf372d59e05f4b8,mptcp dss ack 3007449509], length 0
 In  <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 1 198.51.100.2,mptcp dss ack 1672384568], length 0
        ^^^ retransmission is stopped here, only when both 'Address Id' and 'IP Address' match

Fixes: 00cfd77b ("mptcp: retransmit ADD_ADDR when timeout")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Another left-over. Avoid flooding dmesg with useless text,
we already have a MIB for that event.

Fixes: 648ef4b8 ("mptcp: Implement MPTCP receive path")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is a left-over of early day. A malicious peer can flood
the kernel logs with useless messages, just drop it.

Fixes: f296234c ("mptcp: Add handling of incoming MP_JOIN requests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We can't use tcp_set_congestion_control() on an mptcp socket, as
such function can end-up accessing a tcp-specific field -
prior_ssthresh - causing an OOB access.

To allow propagating the correct ca algo on subflow, cache the ca
name at initialization time.

Additionally avoid overriding the user-selected CA (if any) at
clone time.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/182
Fixes: aa1fbd94 ("mptcp: sockopt: add TCP_CONGESTION and TCP_INFO")
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some of Netronome's activities and people have moved over to Corigine,
including NFP driver maintenance and myself.
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If Link Partner sends frames larger than RX buffer size, MAC mark it
as oversize but still would pass it to the Packet Processor.
In this scenario, Packet Processor scatter frame between multiple buffers,
but only a single buffer would be returned to the Buffer Manager pool and
it would not refill the poll.

Patch add handling of oversize error with buffer header handling, so all
buffers would be returned to the Buffer Manager pool.

Fixes: 3f518509 ("ethernet: Add new driver for Marvell Armada 375 network unit")
Reported-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Eliminate the follow smatch warning:

drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:1227
bnx2x_iov_init_one() warn: missing error code 'err'.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Function skb_ext_add() doesn't initialize created skb extension with any
value and leaves it up to the user. However, since extension of type
TC_SKB_EXT originally contained only single value tc_skb_ext->chain its
users used to just assign the chain value without setting whole extension
memory to zero first. This assumption changed when TC_SKB_EXT extension was
extended with additional fields but not all users were updated to
initialize the new fields which leads to use of uninitialized memory
afterwards. UBSAN log:

[  778.299821] UBSAN: invalid-load in net/openvswitch/flow.c:899:28
[  778.301495] load of value 107 is not a valid value for type '_Bool'
[  778.303215] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc7+ #2
[  778.304933] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[  778.307901] Call Trace:
[  778.308680]  <IRQ>
[  778.309358]  dump_stack+0xbb/0x107
[  778.310307]  ubsan_epilogue+0x5/0x40
[  778.311167]  __ubsan_handle_load_invalid_value.cold+0x43/0x48
[  778.312454]  ? memset+0x20/0x40
[  778.313230]  ovs_flow_key_extract.cold+0xf/0x14 [openvswitch]
[  778.314532]  ovs_vport_receive+0x19e/0x2e0 [openvswitch]
[  778.315749]  ? ovs_vport_find_upcall_portid+0x330/0x330 [openvswitch]
[  778.317188]  ? create_prof_cpu_mask+0x20/0x20
[  778.318220]  ? arch_stack_walk+0x82/0xf0
[  778.319153]  ? secondary_startup_64_no_verify+0xb0/0xbb
[  778.320399]  ? stack_trace_save+0x91/0xc0
[  778.321362]  ? stack_trace_consume_entry+0x160/0x160
[  778.322517]  ? lock_release+0x52e/0x760
[  778.323444]  netdev_frame_hook+0x323/0x610 [openvswitch]
[  778.324668]  ? ovs_netdev_get_vport+0xe0/0xe0 [openvswitch]
[  778.325950]  __netif_receive_skb_core+0x771/0x2db0
[  778.327067]  ? lock_downgrade+0x6e0/0x6f0
[  778.328021]  ? lock_acquire+0x565/0x720
[  778.328940]  ? generic_xdp_tx+0x4f0/0x4f0
[  778.329902]  ? inet_gro_receive+0x2a7/0x10a0
[  778.330914]  ? lock_downgrade+0x6f0/0x6f0
[  778.331867]  ? udp4_gro_receive+0x4c4/0x13e0
[  778.332876]  ? lock_release+0x52e/0x760
[  778.333808]  ? dev_gro_receive+0xcc8/0x2380
[  778.334810]  ? lock_downgrade+0x6f0/0x6f0
[  778.335769]  __netif_receive_skb_list_core+0x295/0x820
[  778.336955]  ? process_backlog+0x780/0x780
[  778.337941]  ? mlx5e_rep_tc_netdevice_event_unregister+0x20/0x20 [mlx5_core]
[  778.339613]  ? seqcount_lockdep_reader_access.constprop.0+0xa7/0xc0
[  778.341033]  ? kvm_clock_get_cycles+0x14/0x20
[  778.342072]  netif_receive_skb_list_internal+0x5f5/0xcb0
[  778.343288]  ? __kasan_kmalloc+0x7a/0x90
[  778.344234]  ? mlx5e_handle_rx_cqe_mpwrq+0x9e0/0x9e0 [mlx5_core]
[  778.345676]  ? mlx5e_xmit_xdp_frame_mpwqe+0x14d0/0x14d0 [mlx5_core]
[  778.347140]  ? __netif_receive_skb_list_core+0x820/0x820
[  778.348351]  ? mlx5e_post_rx_mpwqes+0xa6/0x25d0 [mlx5_core]
[  778.349688]  ? napi_gro_flush+0x26c/0x3c0
[  778.350641]  napi_complete_done+0x188/0x6b0
[  778.351627]  mlx5e_napi_poll+0x373/0x1b80 [mlx5_core]
[  778.352853]  __napi_poll+0x9f/0x510
[  778.353704]  ? mlx5_flow_namespace_set_mode+0x260/0x260 [mlx5_core]
[  778.355158]  net_rx_action+0x34c/0xa40
[  778.356060]  ? napi_threaded_poll+0x3d0/0x3d0
[  778.357083]  ? sched_clock_cpu+0x18/0x190
[  778.358041]  ? __common_interrupt+0x8e/0x1a0
[  778.359045]  __do_softirq+0x1ce/0x984
[  778.359938]  __irq_exit_rcu+0x137/0x1d0
[  778.360865]  irq_exit_rcu+0xa/0x20
[  778.361708]  common_interrupt+0x80/0xa0
[  778.362640]  </IRQ>
[  778.363212]  asm_common_interrupt+0x1e/0x40
[  778.364204] RIP: 0010:native_safe_halt+0xe/0x10
[  778.365273] Code: 4f ff ff ff 4c 89 e7 e8 50 3f 40 fe e9 dc fe ff ff 48 89 df e8 43 3f 40 fe eb 90 cc e9 07 00 00 00 0f 00 2d 74 05 62 00 fb f4 <c3> 90 e9 07 00 00 00 0f 00 2d 64 05 62 00 f4 c3 cc cc 0f 1f 44 00
[  778.369355] RSP: 0018:ffffffff84407e48 EFLAGS: 00000246
[  778.370570] RAX: ffff88842de46a80 RBX: ffffffff84425840 RCX: ffffffff83418468
[  778.372143] RDX: 000000000026f1da RSI: 0000000000000004 RDI: ffffffff8343af5e
[  778.373722] RBP: fffffbfff0884b08 R08: 0000000000000000 R09: ffff88842de46bcb
[  778.375292] R10: ffffed1085bc8d79 R11: 0000000000000001 R12: 0000000000000000
[  778.376860] R13: ffffffff851124a0 R14: 0000000000000000 R15: dffffc0000000000
[  778.378491]  ? rcu_eqs_enter.constprop.0+0xb8/0xe0
[  778.379606]  ? default_idle_call+0x5e/0xe0
[  778.380578]  default_idle+0xa/0x10
[  778.381406]  default_idle_call+0x96/0xe0
[  778.382350]  do_idle+0x3d4/0x550
[  778.383153]  ? arch_cpu_idle_exit+0x40/0x40
[  778.384143]  cpu_startup_entry+0x19/0x20
[  778.385078]  start_kernel+0x3c7/0x3e5
[  778.385978]  secondary_startup_64_no_verify+0xb0/0xbb

Fix the issue by providing new function tc_skb_ext_alloc() that allocates
tc skb extension and initializes its memory to 0 before returning it to the
caller. Change all existing users to use new API instead of calling
skb_ext_add() directly.

Fixes: 038ebb1a ("net/sched: act_ct: fix miss set mru for ovs after defrag in act_ct")
Fixes: d29334c1 ("net/sched: act_api: fix miss set post_ct for ovs after do conntrack in act_ct")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix function name in hns_ethtool.c kernel-doc comment
to remove these warnings found by clang_w1.

drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:202: warning: expecting
prototype for hns_nic_set_link_settings(). Prototype was for
hns_nic_set_link_ksettings() instead.
drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:837: warning: expecting
prototype for get_ethtool_stats(). Prototype was for
hns_get_ethtool_stats() instead.
drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:894: warning:
expecting prototype for get_strings(). Prototype was for
hns_get_strings() instead.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes: 'commit 262b38cd ("net: ethernet: hisilicon: hns: use phydev
from struct net_device")'
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>