- 16 Jan, 2017 19 commits
-
-
Jack Morgenstein authored
Save the qp context flags byte containing the flag disabling vlan stripping in the RESET to INIT qp transition, rather than in the INIT to RTR transition. Per the firmware spec, the flags in this byte are active in the RESET to INIT transition. As a result of saving the flags in the incorrect qp transition, when switching dynamically from VGT to VST and back to VGT, the vlan remained stripped (as is required for VST) and did not return to not-stripped (as is required for VGT). Fixes: f0f829bf ("net/mlx4_core: Add immediate activate for VGT->VST->VGT") Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jack Morgenstein authored
In function mlx4_cq_completion() and mlx4_cq_event(), the radix_tree_lookup requires a rcu_read_lock. This is mandatory: if another core frees the CQ, it could run the radix_tree_node_rcu_free() call_rcu() callback while its being used by the radix tree lookup function. Additionally, in function mlx4_cq_event(), since we are adding the rcu lock around the radix-tree lookup, we no longer need to take the spinlock. Also, the synchronize_irq() call for the async event eliminates the need for incrementing the cq reference count in mlx4_cq_event(). Other changes: 1. In function mlx4_cq_free(), replace spin_lock_irq with spin_lock: we no longer take this spinlock in the interrupt context. The spinlock here, therefore, simply protects against different threads simultaneously invoking mlx4_cq_free() for different cq's. 2. In function mlx4_cq_free(), we move the radix tree delete to before the synchronize_irq() calls. This guarantees that we will not access this cq during any subsequent interrupts, and therefore can safely free the CQ after the synchronize_irq calls. The rcu_read_lock in the interrupt handlers only needs to protect against corrupting the radix tree; the interrupt handlers may access the cq outside the rcu_read_lock due to the synchronize_irq calls which protect against premature freeing of the cq. 3. In function mlx4_cq_event(), we change the mlx_warn message to mlx4_dbg. 4. We leave the cq reference count mechanism in place, because it is still needed for the cq completion tasklet mechanism. Fixes: 6d90aa5c ("net/mlx4_core: Make sure there are no pending async events when freeing CQ") Fixes: 225c7b1f ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters") Signed-off-by:
Matan Barak <matanb@mellanox.com> Signed-off-by:
-
Heiner Kallweit authored
Don't use netdev_info and friends before the net_device is registered. This avoids ugly messages like "meson8b-dwmac c9410000.ethernet (unnamed net_device) (uninitialized): Enable RX Mitigation via HW Watchdog Timer" Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
As found by Olof's build bot, we gain a harmless warning about a potential uninitialized variable reference in mlx5: drivers/net/ethernet/mellanox/mlx5/core/en_tc.c: In function 'parse_tc_fdb_actions': drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:769:13: warning: 'out_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:811:21: note: 'out_dev' was declared here This was introduced through the addition of an 'IS_ERR/PTR_ERR' pair that gcc is unfortunately unable to completely figure out. The problem being gcc cannot tell that if(IS_ERR()) in mlx5e_route_lookup_ipv4() is equivalent to checking if(err) later, so it assumes that 'out_dev' is used after the 'return PTR_ERR(rt)'. The PTR_ERR_OR_ZERO() case by comparison is fairly easy to detect by gcc, so it can't get that wrong, so it no longer warns. Hadar Hen Zion already attempted to fix the warning earlier by adding fake initializations, but that ended up not fully addressing all warnings, so I'm reverting it now that it is no longer needed. Link: http://arm-soc.lixom.net/buildlogs/mainline/v4.10-rc3-98-gcff3b2c/ Fixes: a42485eb ("net/mlx5e: TC ipv4 tunnel encap offload error flow fixes") Fixes: a757d108 ("net/mlx5e: Fix kbuild warnings for uninitialized parameters") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Basil Gunn authored
The ax.25 socket connection timed out & the sock struct has been previously taken down ie. sock struct is now a NULL pointer. Checking the sock_flag causes the segfault. Check if the socket struct pointer is NULL before checking sock_flag. This segfault is seen in timed out netrom connections. Please submit to -stable. Signed-off-by:
Basil Gunn <basil@pacabunga.com> Signed-off-by:
-
Daniel Borkmann authored
Commit 7bd509e3 ("bpf: add prog_digest and expose it via fdinfo/netlink") was recently discussed, partially due to admittedly suboptimal name of "prog_digest" in combination with sha1 hash usage, thus inevitably and rightfully concerns about its security in terms of collision resistance were raised with regards to use-cases. The intended use cases are for debugging resp. introspection only for providing a stable "tag" over the instruction sequence that both kernel and user space can calculate independently. It's not usable at all for making a security relevant decision. So collisions where two different instruction sequences generate the same tag can happen, but ideally at a rather low rate. The "tag" will be dumped in hex and is short enough to introspect in tracepoints or kallsyms output along with other data such as stack trace, etc. Thus, this patch performs a rename into prog_tag and truncates the tag to a short output (64 bits) to make it obvious it's not collision-free. Should in future a hash or facility be needed with a security relevant focus, then we can think about requirements, constraints, etc that would fit to that situation. For now, rework the exposed parts for the current use cases as long as nothing has been released yet. Tested on x86_64 and s390x. Fixes: 7bd509e3 ("bpf: add prog_digest and expose it via fdinfo/netlink") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Signed-off-by:
-
Parthasarathy Bhuvaragan authored
Until now, we allocate memory always with GFP_ATOMIC flag. When the system is under memory pressure and a user tries to send, the send fails due to low memory. However, the user application can wait for free memory if we allocate it using GFP_KERNEL flag. In this commit, we use allocate memory with GFP_KERNEL for all user allocation. Reported-by:
Rune Torgersen <runet@innovsys.com> Acked-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by:
-
Karicheri, Muralidharan authored
Currently dp83867 driver returns error if phy interface type PHY_INTERFACE_MODE_RGMII_RXID is used to set the rx only internal delay. Similarly issue happens for PHY_INTERFACE_MODE_RGMII_TXID. Fix this by checking also the interface type if a particular delay value is missing in the phy dt bindings. Also update the DT document accordingly. Signed-off-by:
Murali Karicheri <m-karicheri2@ti.com> Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
-
Jakub Sitnicki authored
With ip6gre we have a tunnel header which also makes the tunnel MTU smaller. We need to reserve room for it. Previously we were using up space reserved for the Tunnel Encapsulation Limit option header (RFC 2473). Also, after commit b05229f4 ("gre6: Cleanup GREv6 transmit path, call common GRE functions") our contract with the caller has changed. Now we check if the packet length exceeds the tunnel MTU after the tunnel header has been pushed, unlike before. This is reflected in the check where we look at the packet length minus the size of the tunnel header, which is already accounted for in tunnel MTU. Fixes: b05229f4 ("gre6: Cleanup GREv6 transmit path, call common GRE functions") Signed-off-by:
Jakub Sitnicki <jkbs@redhat.com> Signed-off-by:
-
Hangbin Liu authored
This is an IPv6 version of commit 24803f38 ("igmp: do not remove igmp souce list..."). In mld_del_delrec(), we will restore back all source filter info instead of flush them. Move mld_clear_delrec() from ipv6_mc_down() to ipv6_mc_destroy_dev() since we should not remove source list info when set link down. Remove igmp6_group_dropped() in ipv6_mc_destroy_dev() since we have called it in ipv6_mc_down(). Also clear all source info after igmp6_group_dropped() instead of in it because ipv6_mc_down() will call igmp6_group_dropped(). Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Ivan Vecera authored
During interface opening MAC address stored in netdev->dev_addr is programmed in the HW with exception of BE3 VFs where the initial MAC is programmed by parent PF. This is OK when MAC address is not changed when an interfaces is down. In this case the requested MAC is stored to netdev->dev_addr and later is stored into HW during opening. But this is not done for all BE3 VFs so the NIC HW does not know anything about this change and all traffic is filtered. This is the case of bonding if fail_over_mac == 0 where the MACs of the slaves are changed while they are down. The be2net behavior is too restrictive because if a BE3 VF has the FILTMGMT privilege then it is able to modify its MAC without any restriction. To solve the described problem the driver should take care about these privileged BE3 VFs so the MAC is programmed during opening. And by contrast unpriviled BE3 VFs should not be allowed to change its MAC in any case. Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by:
Ivan Vecera <cera@cera.cz> Signed-off-by:
-
Ivan Vecera authored
BE3 VFs without FILTMGMT privilege are not allowed to modify its MAC, VLAN table and UC/MC lists. So don't try to delete MAC on such VFs. Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by:
-
Ivan Vecera authored
Return value from be_mcc_notify_wait() contains a base completion status together with an additional status. The base_status() macro need to be used to access base status. Fixes: e3a7ae2c be2net: Changing MAC Address of a VF was broken Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by:
-
Arnd Bergmann authored
The #warning was present 10 years ago when the driver first got merged. As the platform is rather obsolete by now, it seems very unlikely that the warning will cause anyone to fix the code properly. kernelci.org reports the warning for every build in the meantime, so I think it's better to just turn it into a code comment to reduce noise. Signed-off-by:
-
Masaru Nagai authored
Due to alignment requirements of the hardware transmissions are split into two DMA descriptors, a small padding descriptor of 0 - 3 bytes in length followed by a descriptor for rest of the packet. In the case of IP packets the first descriptor will never be zero due to the way that the stack aligns buffers for IP packets. However, for non-IP packets it may be zero. In that case it has been reported that timeouts occur, presumably because transmission stops at the first zero-length DMA descriptor and thus the packet is not transmitted. However, in my environment a BUG is triggered as follows: [ 20.381417] ------------[ cut here ]------------ [ 20.386054] kernel BUG at lib/swiotlb.c:495! [ 20.390324] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 20.395805] Modules linked in: [ 20.398862] CPU: 0 PID: 2089 Comm: mz Not tainted 4.10.0-rc3-00001-gf13ad2db193f #162 [ 20.406689] Hardware name: Renesas Salvator-X board based on r8a7796 (DT) [ 20.413474] task: ffff80063b1f1900 task.stack: ffff80063a71c000 [ 20.419404] PC is at swiotlb_tbl_map_single+0x178/0x2ec [ 20.424625] LR is at map_single+0x4c/0x98 [ 20.428629] pc : [<ffff00000839c4c0>] lr : [<ffff00000839c680>] pstate: 800001c5 [ 20.436019] sp : ffff80063a71f9b0 [ 20.439327] x29: ffff80063a71f9b0 x28: ffff80063a20d500 [ 20.444636] x27: ffff000008ed5000 x26: 0000000000000000 [ 20.449944] x25: 000000067abe2adc x24: 0000000000000000 [ 20.455252] x23: 0000000000200000 x22: 0000000000000001 [ 20.460559] x21: 0000000000175ffe x20: ffff80063b2a0010 [ 20.465866] x19: 0000000000000000 x18: 0000ffffcae6fb20 [ 20.471173] x17: 0000ffffa09ba018 x16: ffff0000087c8b70 [ 20.476480] x15: 0000ffffa084f588 x14: 0000ffffa09cfa14 [ 20.481787] x13: 0000ffffcae87ff0 x12: 000000000063abe2 [ 20.487098] x11: ffff000008096360 x10: ffff80063abe2adc [ 20.492407] x9 : 0000000000000000 x8 : 0000000000000000 [ 20.497718] x7 : 0000000000000000 x6 : ffff000008ed50d0 [ 20.503028] x5 : 0000000000000000 x4 : 0000000000000001 [ 20.508338] x3 : 0000000000000000 x2 : 000000067abe2adc [ 20.513648] x1 : 00000000bafff000 x0 : 0000000000000000 [ 20.518958] [ 20.520446] Process mz (pid: 2089, stack limit = 0xffff80063a71c000) [ 20.526798] Stack: (0xffff80063a71f9b0 to 0xffff80063a720000) [ 20.532543] f9a0: ffff80063a71fa30 ffff00000839c680 [ 20.540374] f9c0: ffff80063b2a0010 ffff80063b2a0010 0000000000000001 0000000000000000 [ 20.548204] f9e0: 000000000000006e ffff80063b23c000 ffff80063b23c000 0000000000000000 [ 20.556034] fa00: ffff80063b23c000 ffff80063a20d500 000000013b1f1900 0000000000000000 [ 20.563864] fa20: ffff80063ffd18e0 ffff80063b2a0010 ffff80063a71fa60 ffff00000839cd10 [ 20.571694] fa40: ffff80063b2a0010 0000000000000000 ffff80063ffd18e0 000000067abe2adc [ 20.579524] fa60: ffff80063a71fa90 ffff000008096380 ffff80063b2a0010 0000000000000000 [ 20.587353] fa80: 0000000000000000 0000000000000001 ffff80063a71fac0 ffff00000864f770 [ 20.595184] faa0: ffff80063b23caf0 0000000000000000 0000000000000000 0000000000000140 [ 20.603014] fac0: ffff80063a71fb60 ffff0000087e6498 ffff80063a20d500 ffff80063b23c000 [ 20.610843] fae0: 0000000000000000 ffff000008daeaf0 0000000000000000 ffff000008daeb00 [ 20.618673] fb00: ffff80063a71fc0c ffff000008da7000 ffff80063b23c090 ffff80063a44f000 [ 20.626503] fb20: 0000000000000000 ffff000008daeb00 ffff80063a71fc0c ffff000008da7000 [ 20.634333] fb40: ffff80063b23c090 0000000000000000 ffff800600000037 ffff0000087e63d8 [ 20.642163] fb60: ffff80063a71fbc0 ffff000008807510 ffff80063a692400 ffff80063a20d500 [ 20.649993] fb80: ffff80063a44f000 ffff80063b23c000 ffff80063a69249c 0000000000000000 [ 20.657823] fba0: 0000000000000000 ffff80063a087800 ffff80063b23c000 ffff80063a20d500 [ 20.665653] fbc0: ffff80063a71fc10 ffff0000087e67dc ffff80063a20d500 ffff80063a692400 [ 20.673483] fbe0: ffff80063b23c000 0000000000000000 ffff80063a44f000 ffff80063a69249c [ 20.681312] fc00: ffff80063a5f1a10 000000103a087800 ffff80063a71fc70 ffff0000087e6b24 [ 20.689142] fc20: ffff80063a5f1a80 ffff80063a71fde8 000000000000000f 00000000000005ea [ 20.696972] fc40: ffff80063a5f1a10 0000000000000000 000000000000000f ffff00000887fbd0 [ 20.704802] fc60: fffffff43a5f1a80 0000000000000000 ffff80063a71fc80 ffff000008880240 [ 20.712632] fc80: ffff80063a71fd90 ffff0000087c7a34 ffff80063afc7180 0000000000000000 [ 20.720462] fca0: 0000ffffcae6fe18 0000000000000014 0000000060000000 0000000000000015 [ 20.728292] fcc0: 0000000000000123 00000000000000ce ffff0000088d2000 ffff80063b1f1900 [ 20.736122] fce0: 0000000000008933 ffff000008e7cb80 ffff80063a71fd80 ffff0000087c50a4 [ 20.743951] fd00: 0000000000008933 ffff000008e7cb80 ffff000008e7cb80 000000100000000e [ 20.751781] fd20: ffff80063a71fe4c 0000ffff00000300 0000000000000123 0000000000000000 [ 20.759611] fd40: 0000000000000000 ffff80063b1f0000 000000000000000e 0000000000000300 [ 20.767441] fd60: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 20.775271] fd80: 0000000000000000 0000000000000000 ffff80063a71fda0 ffff0000087c8c20 [ 20.783100] fda0: 0000000000000000 ffff000008082f30 0000000000000000 0000800637260000 [ 20.790930] fdc0: ffffffffffffffff 0000ffffa0903078 0000000000000000 000000001ea87232 [ 20.798760] fde0: 000000000000000f ffff80063a71fe40 ffff800600000014 ffff000000000001 [ 20.806590] fe00: 0000000000000000 0000000000000000 ffff80063a71fde8 0000000000000000 [ 20.814420] fe20: 0000000000000000 0000000000000000 0000000000000000 0000000000000001 [ 20.822249] fe40: 0000000203000011 0000000000000000 0000000000000000 ffff80063a68aa00 [ 20.830079] fe60: ffff80063a68aa00 0000000000000003 0000000000008933 ffff0000081f1b9c [ 20.837909] fe80: 0000000000000000 ffff000008082f30 0000000000000000 0000800637260000 [ 20.845739] fea0: ffffffffffffffff 0000ffffa07ca81c 0000000060000000 0000000000000015 [ 20.853569] fec0: 0000000000000003 000000001ea87232 000000000000000f 0000000000000000 [ 20.861399] fee0: 0000ffffcae6fe18 0000000000000014 0000000000000300 0000000000000000 [ 20.869228] ff00: 00000000000000ce 0000000000000000 00000000ffffffff 0000000000000000 [ 20.877059] ff20: 0000000000000002 0000ffffcae87ff0 0000ffffa09cfa14 0000ffffa084f588 [ 20.884888] ff40: 0000000000000000 0000ffffa09ba018 0000ffffcae6fb20 000000001ea87010 [ 20.892718] ff60: 0000ffffa09b9000 0000ffffcae6fe30 0000ffffcae6fe18 000000000000000f [ 20.900548] ff80: 0000000000000003 000000001ea87232 0000000000000000 0000000000000000 [ 20.908378] ffa0: 0000000000000000 0000ffffcae6fdc0 0000ffffa09a7824 0000ffffcae6fdc0 [ 20.916208] ffc0: 0000ffffa0903078 0000000060000000 0000000000000003 00000000000000ce [ 20.924038] ffe0: 0000000000000000 0000000000000000 ffffffffffffffff ffffffffffffffff [ 20.931867] Call trace: [ 20.934312] Exception stack(0xffff80063a71f7e0 to 0xffff80063a71f910) [ 20.940750] f7e0: 0000000000000000 0001000000000000 ffff80063a71f9b0 ffff00000839c4c0 [ 20.948580] f800: ffff80063a71f840 ffff00000888a6e4 ffff80063a24c418 ffff80063a24c448 [ 20.956410] f820: 0000000000000000 ffff00000811cd54 ffff80063a71f860 ffff80063a24c458 [ 20.964240] f840: ffff80063a71f870 ffff00000888b258 ffff80063a24c418 0000000000000001 [ 20.972070] f860: ffff80063a71f910 ffff80063a7b7028 ffff80063a71f890 ffff0000088825e4 [ 20.979899] f880: 0000000000000000 00000000bafff000 000000067abe2adc 0000000000000000 [ 20.987729] f8a0: 0000000000000001 0000000000000000 ffff000008ed50d0 0000000000000000 [ 20.995560] f8c0: 0000000000000000 0000000000000000 ffff80063abe2adc ffff000008096360 [ 21.003390] f8e0: 000000000063abe2 0000ffffcae87ff0 0000ffffa09cfa14 0000ffffa084f588 [ 21.011219] f900: ffff0000087c8b70 0000ffffa09ba018 [ 21.016097] [<ffff00000839c4c0>] swiotlb_tbl_map_single+0x178/0x2ec [ 21.022362] [<ffff00000839c680>] map_single+0x4c/0x98 [ 21.027411] [<ffff00000839cd10>] swiotlb_map_page+0xa4/0x138 [ 21.033072] [<ffff000008096380>] __swiotlb_map_page+0x20/0x7c [ 21.038821] [<ffff00000864f770>] ravb_start_xmit+0x174/0x668 [ 21.044484] [<ffff0000087e6498>] dev_hard_start_xmit+0x8c/0x120 [ 21.050407] [<ffff000008807510>] sch_direct_xmit+0x108/0x1a0 [ 21.056064] [<ffff0000087e67dc>] __dev_queue_xmit+0x194/0x4cc [ 21.061807] [<ffff0000087e6b24>] dev_queue_xmit+0x10/0x18 [ 21.067214] [<ffff000008880240>] packet_sendmsg+0xf40/0x1220 [ 21.072873] [<ffff0000087c7a34>] sock_sendmsg+0x18/0x2c [ 21.078097] [<ffff0000087c8c20>] SyS_sendto+0xb0/0xf0 [ 21.083150] [<ffff000008082f30>] el0_svc_naked+0x24/0x28 [ 21.088462] Code: d34bfef7 2a1803f3 1a9f86d6 35fff878 (d4210000) [ 21.094611] ---[ end trace 5bc544ad491f3814 ]--- [ 21.099234] Kernel panic - not syncing: Fatal exception in interrupt [ 21.105587] Kernel Offset: disabled [ 21.109073] Memory Limit: none [ 21.112126] ---[ end Kernel panic - not syncing: Fatal exception in interrupt Fixes: 2f45d190 ("ravb: minimize TX data copying") Signed-off-by: Masaru Nagai <masaru.nagai.vx@renesas.com Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Acked-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Eric Dumazet authored
Disable BH around the call to napi_schedule() to avoid following warning [ 52.095499] NOHZ: local_softirq_pending 08 [ 52.421291] NOHZ: local_softirq_pending 08 [ 52.608313] NOHZ: local_softirq_pending 08 Fixes: 8d59de8f ("net/mlx4_en: Process all completions in RX rings after port goes up") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Erez Shitrit <erezsh@mellanox.com> Cc: Eugenia Emantayev <eugenia@mellanox.com> Cc: Tariq Toukan <tariqt@mellanox.com> Acked-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothDavid S. Miller authored
Johan Hedberg says: ==================== pull request: bluetooth 2017-01-16 Here are a couple of important 802.15.4 driver fixes for the 4.10 kernel. Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: -
David S. Miller authored
Merge tag 'mac80211-for-davem-2017-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== We have a number of fixes, in part because I was late in actually sending them out - will try to do better in the future: * handle VHT opmode properly when hostapd is controlling full station state * two fixes for minimum channel width in mac80211 * don't leave SMPS set to junk in HT capabilities * fix headroom when forwarding mesh packets, recently broken by another fix that failed to take into account frame encryption * fix the TID in null-data packets indicating EOSP (end of service period) in U-APSD * prevent attempting to use (and then failing which results in crashes) TXQs on stations that aren't added to the driver yet ==================== Signed-off-by:
-
Lance Richardson authored
When executing conntrack actions on skbuffs with checksum mode CHECKSUM_COMPLETE, the checksum must be updated to account for header pushes and pulls. Otherwise we get "hw csum failure" logs similar to this (ICMP packet received on geneve tunnel via ixgbe NIC): [ 405.740065] genev_sys_6081: hw csum failure [ 405.740106] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G I 4.10.0-rc3+ #1 [ 405.740108] Call Trace: [ 405.740110] <IRQ> [ 405.740113] dump_stack+0x63/0x87 [ 405.740116] netdev_rx_csum_fault+0x3a/0x40 [ 405.740118] __skb_checksum_complete+0xcf/0xe0 [ 405.740120] nf_ip_checksum+0xc8/0xf0 [ 405.740124] icmp_error+0x1de/0x351 [nf_conntrack_ipv4] [ 405.740132] nf_conntrack_in+0xe1/0x550 [nf_conntrack] [ 405.740137] ? find_bucket.isra.2+0x62/0x70 [openvswitch] [ 405.740143] __ovs_ct_lookup+0x95/0x980 [openvswitch] [ 405.740145] ? netif_rx_internal+0x44/0x110 [ 405.740149] ovs_ct_execute+0x147/0x4b0 [openvswitch] [ 405.740153] do_execute_actions+0x22e/0xa70 [openvswitch] [ 405.740157] ovs_execute_actions+0x40/0x120 [openvswitch] [ 405.740161] ovs_dp_process_packet+0x84/0x120 [openvswitch] [ 405.740166] ovs_vport_receive+0x73/0xd0 [openvswitch] [ 405.740168] ? udp_rcv+0x1a/0x20 [ 405.740170] ? ip_local_deliver_finish+0x93/0x1e0 [ 405.740172] ? ip_local_deliver+0x6f/0xe0 [ 405.740174] ? ip_rcv_finish+0x3a0/0x3a0 [ 405.740176] ? ip_rcv_finish+0xdb/0x3a0 [ 405.740177] ? ip_rcv+0x2a7/0x400 [ 405.740180] ? __netif_receive_skb_core+0x970/0xa00 [ 405.740185] netdev_frame_hook+0xd3/0x160 [openvswitch] [ 405.740187] __netif_receive_skb_core+0x1dc/0xa00 [ 405.740194] ? ixgbe_clean_rx_irq+0x46d/0xa20 [ixgbe] [ 405.740197] __netif_receive_skb+0x18/0x60 [ 405.740199] netif_receive_skb_internal+0x40/0xb0 [ 405.740201] napi_gro_receive+0xcd/0x120 [ 405.740204] gro_cell_poll+0x57/0x80 [geneve] [ 405.740206] net_rx_action+0x260/0x3c0 [ 405.740209] __do_softirq+0xc9/0x28c [ 405.740211] irq_exit+0xd9/0xf0 [ 405.740213] do_IRQ+0x51/0xd0 [ 405.740215] common_interrupt+0x93/0x93 Fixes: 7f8a436e ("openvswitch: Add conntrack action") Signed-off-by:
Lance Richardson <lrichard@redhat.com> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
-
- 13 Jan, 2017 5 commits
-
-
Shannon Nelson authored
Fix up a data alignment issue on sparc by swapping the order of the cookie byte array field with the length field in struct tcp_fastopen_cookie, and making it a proper union to clean up the typecasting. This addresses log complaints like these: log_unaligned: 113 callbacks suppressed Kernel unaligned access at TPC[976490] tcp_try_fastopen+0x2d0/0x360 Kernel unaligned access at TPC[9764ac] tcp_try_fastopen+0x2ec/0x360 Kernel unaligned access at TPC[9764c8] tcp_try_fastopen+0x308/0x360 Kernel unaligned access at TPC[9764e4] tcp_try_fastopen+0x324/0x360 Kernel unaligned access at TPC[976490] tcp_try_fastopen+0x2d0/0x360 Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:Shannon Nelson <shannon.nelson@oracle.com> Acked-by:
-
David Lebrun authored
When CONFIG_PREEMPT=y, CONFIG_IPV6=m and CONFIG_SEG6_HMAC=y, seg6_hmac_init() is called during the initialization of the ipv6 module. This causes a subsequent call to smp_processor_id() with preemption enabled, resulting in the following trace. [ 20.451460] BUG: using smp_processor_id() in preemptible [00000000] code: systemd/1 [ 20.452556] caller is debug_smp_processor_id+0x17/0x19 [ 20.453304] CPU: 0 PID: 1 Comm: systemd Not tainted 4.9.0-rc5-00973-g46738b13 #1 [ 20.454406] ffffc9000062fc18 ffffffff813607b2 0000000000000000 ffffffff81a7f782 [ 20.455528] ffffc9000062fc48 ffffffff813778dc 0000000000000000 00000000001dcf98 [ 20.456539] ffffffffa003bd08 ffffffff81af93e0 ffffc9000062fc58 ffffffff81377905 [ 20.456539] Call Trace: [ 20.456539] [<ffffffff813607b2>] dump_stack+0x63/0x7f [ 20.456539] [<ffffffff813778dc>] check_preemption_disabled+0xd1/0xe3 [ 20.456539] [<ffffffff81377905>] debug_smp_processor_id+0x17/0x19 [ 20.460260] [<ffffffffa0061f3b>] seg6_hmac_init+0xfa/0x192 [ipv6] [ 20.460260] [<ffffffffa0061ccc>] seg6_init+0x39/0x6f [ipv6] [ 20.460260] [<ffffffffa006121a>] inet6_init+0x21a/0x321 [ipv6] [ 20.460260] [<ffffffffa0061000>] ? 0xffffffffa0061000 [ 20.460260] [<ffffffff81000457>] do_one_initcall+0x8b/0x115 [ 20.460260] [<ffffffff811328a3>] do_init_module+0x53/0x1c4 [ 20.460260] [<ffffffff8110650a>] load_module+0x1153/0x14ec [ 20.460260] [<ffffffff81106a7b>] SYSC_finit_module+0x8c/0xb9 [ 20.460260] [<ffffffff81106a7b>] ? SYSC_finit_module+0x8c/0xb9 [ 20.460260] [<ffffffff81106abc>] SyS_finit_module+0x9/0xb [ 20.460260] [<ffffffff810014d1>] do_syscall_64+0x62/0x75 [ 20.460260] [<ffffffff816834f0>] entry_SYSCALL64_slow_path+0x25/0x25 Moreover, dst_cache_* functions also call smp_processor_id(), generating a similar trace. This patch uses raw_cpu_ptr() in seg6_hmac_init() rather than this_cpu_ptr() and disable preemption when using dst_cache_* functions. Signed-off-by:
David Lebrun <david.lebrun@uclouvain.be> Signed-off-by:
-
Florian Fainelli authored
The __bcm_sysport_tx_reclaim() function is used to reclaim transmit resources in different places within the driver. Most of them should not affect the state of the transit flow control. Introduce bcm_sysport_tx_clean() which cleans the ring, but does not re-enable flow control towards the networking stack, and make bcm_sysport_tx_reclaim() do the actual transmit queue flow control. Fixes: 80105bef ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Michal Kazior authored
Station structure is considered as not uploaded (to driver) until drv_sta_state() finishes. This call is however done after the structure is attached to mac80211 internal lists and hashes. This means mac80211 can lookup (and use) station structure before it is uploaded to a driver. If this happens (structure exists, but sta->uploaded is false) fast_tx path can still be taken. Deep in the fastpath call the sta->uploaded is checked against to derive "pubsta" argument for ieee80211_get_txq(). If sta->uploaded is false (and sta is actually non-NULL) ieee80211_get_txq() effectively downgraded to vif->txq. At first glance this may look innocent but coerces mac80211 into a state that is almost guaranteed (codel may drop offending skb) to crash because a station-oriented skb gets queued up on vif-oriented txq. The ieee80211_tx_dequeue() ends up looking at info->control.flags and tries to use txq->sta which in the fail case is NULL. It's probably pointless to pretend one can downgrade skb from sta-txq to vif-txq. Since downgrading unicast traffic to vif->txq must not be done there's no txq to put a frame on if sta->uploaded is false. Therefore the code is made to fall back to regular tx() op path if the described condition is hit. Only drivers using wake_tx_queue were affected. Example crash dump before fix: Unable to handle kernel paging request at virtual address ffffe26c PC is at ieee80211_tx_dequeue+0x204/0x690 [mac80211] [<bf4252a4>] (ieee80211_tx_dequeue [mac80211]) from [<bf4b1388>] (ath10k_mac_tx_push_txq+0x54/0x1c0 [ath10k_core]) [<bf4b1388>] (ath10k_mac_tx_push_txq [ath10k_core]) from [<bf4bdfbc>] (ath10k_htt_txrx_compl_task+0xd78/0x11d0 [ath10k_core]) [<bf4bdfbc>] (ath10k_htt_txrx_compl_task [ath10k_core]) [<bf51c5a4>] (ath10k_pci_napi_poll+0x54/0xe8 [ath10k_pci]) [<bf51c5a4>] (ath10k_pci_napi_poll [ath10k_pci]) from [<c0572e90>] (net_rx_action+0xac/0x160) Reported-by:
Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by:
Michal Kazior <michal.kazior@tieto.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Felix Fietkau authored
ibss and mesh modes copy the ht capabilites from the band without overriding the SMPS state. Unfortunately the default value 0 for the SMPS field means static SMPS instead of disabled. This results in HT ibss and mesh setups using only single-stream rates, even though SMPS is not supposed to be active. Initialize SMPS to disabled for all bands on ieee80211_hw_register to ensure that the value is sane where it is not overriden with the real SMPS state. Reported-by:
Elektra Wagenrad <onelektra@gmx.net> Signed-off-by:
Felix Fietkau <nbd@nbd.name> [move VHT TODO comment to a better place] Signed-off-by:
-
- 12 Jan, 2017 14 commits
-
-
Vadim Lomovtsev authored
While probing BGX we requesting appropriate QLM for it's configuration and get LMAC count by that request. Then, while reading configured MAC values from SSDT table we need to save them in proper mapping: BGX[i]->lmac[j].mac = <MAC value> to later provide for initialization stuff. In order to fill such mapping properly we need to add lmac index to be used while acpi initialization since at this moment bgx->lmac_count already contains actual value. Signed-off-by:
Vadim Lomovtsev <Vadim.Lomovtsev@caviumnetworks.com> Signed-off-by:
-
Stefan Schmidt authored
After the addition of the frame_retries callback we could run into cases where a ATUSB device with an older firmware version would now longer be able to bring the interface up. We keep this functionality disabled now if the minimum firmware version for this feature is not available. Fixes: 5d82288b ("ieee802154: atusb: implement .set_frame_retries ops callback") Reported-by:
Alexander Aring <aar@pengutronix.de> Acked-by:
Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org>
-
Andrey Smirnov authored
Driver code never touches "rstn" signal in atomic context, so there's no need to implicitly put such restriction on it by using gpio_set_value to manipulate it. Replace gpio_set_value to gpio_set_value_cansleep to fix that. As a an example of where such restriction might be inconvenient, consider a hardware design where "rstn" is connected to a pin of I2C/SPI GPIO expander chip. Cc: Chris Healy <cphealy@gmail.com> Signed-off-by:
Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by:
-
Stefan Schmidt authored
From 4.9 we should really avoid using the stack here as this will not be DMA able on various platforms. This changes a buffer that was introduced in the 4.10 merge window. Fixes: 6cc33eba ("ieee802154: atusb: try to read permanent extended address from device") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Stefan Schmidt authored
In the unlikely case were the firmware is new enough but the actual USB command still fails make sure we set a random address and return. Signed-off-by:
-
Stefan Schmidt authored
From 4.9 we should really avoid using the stack here as this will not be DMA able on various platforms. This changes the buffers already being present in time of 4.9 being released. This should go into stable as well. Reported-by:
-
David Ahern authored
rtm_table is an 8-bit field while table ids are allowed up to u32. Commit 709772e6 ("net: Fix routing tables with id > 255 for legacy software") added the preference to set rtm_table in dumps to RT_TABLE_COMPAT if the table id is > 255. The table id returned on get route requests should do the same. Fixes: c36ba660 ("net: Allow user to get table id from route lookup") Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
Timur Tabi authored
Commit 6ffe1c4c ("net: qcom/emac: fix of_node and phydev leaks") fixed the problem with reference leaks on phydev, but the fix is device-tree specific. When the driver unloads, the reference is dropped only on DT systems. Instead, it's cleaner if up grab an reference on ACPI systems. When the driver unloads, we can drop the reference without having to check whether we're on a DT system. Signed-off-by:
Timur Tabi <timur@codeaurora.org> Reviewed-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
David Ahern authored
Handle failure in lwtunnel_fill_encap adding attributes to skb. Fixes: 571e7226 ("ipv4: support for fib route lwtunnel encap attributes") Fixes: 19e42e45 ("ipv6: support for fib route lwtunnel encap attributes") Signed-off-by:
-
Kazuya Mizuguchi authored
Remove Rx overflow log messages as in an environment where logging results in network traffic logging may cause further overflows. Fixes: c156633f ("Renesas Ethernet AVB driver proper") Signed-off-by:
Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> [simon: reworked changelog] Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: Couple of fixes Couple of simple fixes from Arkadi and Elad. Please queue these up for stable. Thanks. ==================== Signed-off-by: -
Elad Raz authored
The event_data starts from address 0x00-0x0C and not from 0x08-0x014. This leads to duplication with other fields in the Event Queue Element such as sub-type, cqn and owner. Fixes: eda6500a ("mlxsw: Add PCI bus implementation") Signed-off-by:
Elad Raz <eladr@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Arkadi Sharshevsky authored
During transmission the skb is checked for headroom in order to add vendor specific header. In case the skb needs to be re-allocated, skb_realloc_headroom() is called to make a private copy of the original, but doesn't release it. Current code assumes that the original skb is released during reallocation and only releases it at the error path which causes a memory leak. Fix this by adding the original skb release to the main path. Fixes: d003462a ("mlxsw: Simplify mlxsw_sx_port_xmit function") Signed-off-by:
Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by:
-
Arkadi Sharshevsky authored
During transmission the skb is checked for headroom in order to add vendor specific header. In case the skb needs to be re-allocated, skb_realloc_headroom() is called to make a private copy of the original, but doesn't release it. Current code assumes that the original skb is released during reallocation and only releases it at the error path which causes a memory leak. Fix this by adding the original skb release to the main path. Fixes: 56ade8fe ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
- 11 Jan, 2017 2 commits
-
-
stephen hemminger authored
The receive callback (in tasklet context) is using RCU to get reference to associated VF network device but this is not safe. RCU read lock needs to be held. Found by running with full lockdep debugging enabled. Fixes: f207c10d ("hv_netvsc: use RCU to protect vf_netdev") Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
-
Martynas Pumputis authored
Otherwise, a xfrm policy with sport/dport being set cannot be matched. Signed-off-by:
Martynas Pumputis <martynas@weave.works> Signed-off-by:
-
