[1] mentions that memfd_secret is only supported on arm64, riscv, x86 and
x86_64 for now.  It doesn't support other architectures.  I found the
build error on arm and decided to send the fix as it was creating noise on
KernelCI:

memfd_secret.c: In function 'memfd_secret':
memfd_secret.c:42:24: error: '__NR_memfd_secret' undeclared (first use in this function);
did you mean 'memfd_secret'?
   42 |         return syscall(__NR_memfd_secret, flags);
      |                        ^~~~~~~~~~~~~~~~~
      |                        memfd_secret

Hence I'm adding condition that memfd_secret should only be compiled on
supported architectures.

Also check in run_vmtests script if memfd_secret binary is present before
executing it.

Link: https://lkml.kernel.org/r/20240812061522.1933054-1-usama.anjum@collabora.com
Link: https://lore.kernel.org/all/20210518072034.31572-7-rppt@kernel.org/ [1]
Link: https://lkml.kernel.org/r/20240809075642.403247-1-usama.anjum@collabora.com
Fixes: 76fe17ef ("secretmem: test: add basic selftest for memfd_secret(2)")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Unaccepted memory is considered unusable free memory, which is not counted
as free on the zone watermark check.  This causes get_page_from_freelist()
to accept more memory to hit the high watermark, but it creates problems
in the reclaim path.

The reclaim path encounters a failed zone watermark check and attempts to
reclaim memory.  This is usually successful, but if there is little or no
reclaimable memory, it can result in endless reclaim with little to no
progress.  This can occur early in the boot process, just after start of
the init process when the only reclaimable memory is the page cache of the
init executable and its libraries.

Make unaccepted memory free from watermark check point of view.  This way
unaccepted memory will never be the trigger of memory reclaim.  Accept
more memory in the get_page_from_freelist() if needed.

Link: https://lkml.kernel.org/r/20240809114854.3745464-2-kirill.shutemov@linux.intel.com
Fixes: dcdfdd40 ("mm: Add support for unaccepted memory")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Jianxiong Gao <jxgao@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Tested-by: Jianxiong Gao <jxgao@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>	[6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The "initial_nr_hugepages" variable is unsigned long so it takes up to 20
characters to print, plus 1 more character for the NUL terminator. 
Unfortunately, this buffer is not quite large enough for the terminator to
fit.  Also use snprintf() for a belt and suspenders approach.

Link: https://lkml.kernel.org/r/87470c06-b45a-4e83-92ff-aac2e7b9c6ba@stanley.mountain
Fixes: fb9293b6 ("selftests/mm: compaction_test: fix bogus test success and reduce probability of OOM-killer invocation")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

When handling a numa page fault, task_numa_fault() should be called by a
process that restores the page table of the faulted folio to avoid
duplicated stats counting.  Commit c5b5a3dd ("mm: thp: refactor NUMA
fault handling") restructured do_huge_pmd_numa_page() and did not avoid
task_numa_fault() call in the second page table check after a numa
migration failure.  Fix it by making all !pmd_same() return immediately.

This issue can cause task_numa_fault() being called more than necessary
and lead to unexpected numa balancing results (It is hard to tell whether
the issue will cause positive or negative performance impact due to
duplicated numa fault counting).

Link: https://lkml.kernel.org/r/20240809145906.1513458-3-ziy@nvidia.com
Fixes: c5b5a3dd ("mm: thp: refactor NUMA fault handling")
Reported-by: "Huang, Ying" <ying.huang@intel.com>
Closes: https://lore.kernel.org/linux-mm/87zfqfw0yw.fsf@yhuang6-desk2.ccr.corp.intel.com/Signed-off-by: Zi Yan <ziy@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

When handling a numa page fault, task_numa_fault() should be called by a
process that restores the page table of the faulted folio to avoid
duplicated stats counting.  Commit b99a342d ("NUMA balancing: reduce
TLB flush via delaying mapping on hint page fault") restructured
do_numa_page() and did not avoid task_numa_fault() call in the second page
table check after a numa migration failure.  Fix it by making all
!pte_same() return immediately.

This issue can cause task_numa_fault() being called more than necessary
and lead to unexpected numa balancing results (It is hard to tell whether
the issue will cause positive or negative performance impact due to
duplicated numa fault counting).

Link: https://lkml.kernel.org/r/20240809145906.1513458-2-ziy@nvidia.com
Fixes: b99a342d ("NUMA balancing: reduce TLB flush via delaying mapping on hint page fault")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reported-by: "Huang, Ying" <ying.huang@intel.com>
Closes: https://lore.kernel.org/linux-mm/87zfqfw0yw.fsf@yhuang6-desk2.ccr.corp.intel.com/Acked-by: David Hildenbrand <david@redhat.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The __vmap_pages_range_noflush() assumes its argument pages** contains
pages with the same page shift.  However, since commit e9c3cda4 ("mm,
vmalloc: fix high order __GFP_NOFAIL allocations"), if gfp_flags includes
__GFP_NOFAIL with high order in vm_area_alloc_pages() and page allocation
failed for high order, the pages** may contain two different page shifts
(high order and order-0).  This could lead __vmap_pages_range_noflush() to
perform incorrect mappings, potentially resulting in memory corruption.

Users might encounter this as follows (vmap_allow_huge = true, 2M is for
PMD_SIZE):

kvmalloc(2M, __GFP_NOFAIL|GFP_X)
    __vmalloc_node_range_noprof(vm_flags=VM_ALLOW_HUGE_VMAP)
        vm_area_alloc_pages(order=9) ---> order-9 allocation failed and fallback to order-0
            vmap_pages_range()
                vmap_pages_range_noflush()
                    __vmap_pages_range_noflush(page_shift = 21) ----> wrong mapping happens

We can remove the fallback code because if a high-order allocation fails,
__vmalloc_node_range_noprof() will retry with order-0.  Therefore, it is
unnecessary to fallback to order-0 here.  Therefore, fix this by removing
the fallback code.

Link: https://lkml.kernel.org/r/20240808122019.3361-1-hailong.liu@oppo.com
Fixes: e9c3cda4 ("mm, vmalloc: fix high order __GFP_NOFAIL allocations")
Signed-off-by: Hailong Liu <hailong.liu@oppo.com>
Reported-by: Tangquan Zheng <zhengtangquan@oppo.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Acked-by: Barry Song <baohua@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The memory_failure_cpu structure is a per-cpu structure.  Access to its
content requires the use of get_cpu_var() to lock in the current CPU and
disable preemption.  The use of a regular spinlock_t for locking purpose
is fine for a non-RT kernel.

Since the integration of RT spinlock support into the v5.15 kernel, a
spinlock_t in a RT kernel becomes a sleeping lock and taking a sleeping
lock in a preemption disabled context is illegal resulting in the
following kind of warning.

  [12135.732244] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
  [12135.732248] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 270076, name: kworker/0:0
  [12135.732252] preempt_count: 1, expected: 0
  [12135.732255] RCU nest depth: 2, expected: 2
    :
  [12135.732420] Hardware name: Dell Inc. PowerEdge R640/0HG0J8, BIOS 2.10.2 02/24/2021
  [12135.732423] Workqueue: kacpi_notify acpi_os_execute_deferred
  [12135.732433] Call Trace:
  [12135.732436]  <TASK>
  [12135.732450]  dump_stack_lvl+0x57/0x81
  [12135.732461]  __might_resched.cold+0xf4/0x12f
  [12135.732479]  rt_spin_lock+0x4c/0x100
  [12135.732491]  memory_failure_queue+0x40/0xe0
  [12135.732503]  ghes_do_memory_failure+0x53/0x390
  [12135.732516]  ghes_do_proc.constprop.0+0x229/0x3e0
  [12135.732575]  ghes_proc+0xf9/0x1a0
  [12135.732591]  ghes_notify_hed+0x6a/0x150
  [12135.732602]  notifier_call_chain+0x43/0xb0
  [12135.732626]  blocking_notifier_call_chain+0x43/0x60
  [12135.732637]  acpi_ev_notify_dispatch+0x47/0x70
  [12135.732648]  acpi_os_execute_deferred+0x13/0x20
  [12135.732654]  process_one_work+0x41f/0x500
  [12135.732695]  worker_thread+0x192/0x360
  [12135.732715]  kthread+0x111/0x140
  [12135.732733]  ret_from_fork+0x29/0x50
  [12135.732779]  </TASK>

Fix it by using a raw_spinlock_t for locking instead.

Also move the pr_err() out of the lock critical section and after
put_cpu_ptr() to avoid indeterminate latency and the possibility of sleep
with this call.

[longman@redhat.com: don't hold percpu ref across pr_err(), per Miaohe]
  Link: https://lkml.kernel.org/r/20240807181130.1122660-1-longman@redhat.com
Link: https://lkml.kernel.org/r/20240806164107.1044956-1-longman@redhat.com
Fixes: 0f383b6d ("locking/spinlock: Provide RT variant")
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Fix invalid access to pgdat during hot-remove operation:
ndctl users reported a GPF when trying to destroy a namespace:
$ ndctl destroy-namespace all -r all -f
 Segmentation fault
 dmesg:
 Oops: general protection fault, probably for
 non-canonical address 0xdffffc0000005650: 0000 [#1] PREEMPT SMP KASAN
 PTI
 KASAN: probably user-memory-access in range
 [0x000000000002b280-0x000000000002b287]
 CPU: 26 UID: 0 PID: 1868 Comm: ndctl Not tainted 6.11.0-rc1 #1
 Hardware name: Dell Inc. PowerEdge R640/08HT8T, BIOS
 2.20.1 09/13/2023
 RIP: 0010:mod_node_page_state+0x2a/0x110

cxl-test users report a GPF when trying to unload the test module:
$ modrpobe -r cxl-test
 dmesg
 BUG: unable to handle page fault for address: 0000000000004200
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 0 P4D 0
 Oops: Oops: 0000 [#1] PREEMPT SMP PTI
 CPU: 0 UID: 0 PID: 1076 Comm: modprobe Tainted: G O N 6.11.0-rc1 #197
 Tainted: [O]=OOT_MODULE, [N]=TEST
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/15
 RIP: 0010:mod_node_page_state+0x6/0x90

Currently, when memory is hot-plugged or hot-removed the accounting is
done based on the assumption that memmap is allocated from the same node
as the hot-plugged/hot-removed memory, which is not always the case.

In addition, there are challenges with keeping the node id of the memory
that is being remove to the time when memmap accounting is actually
performed: since this is done after remove_pfn_range_from_zone(), and
also after remove_memory_block_devices(). Meaning that we cannot use
pgdat nor walking though memblocks to get the nid.

Given all of that, account the memmap overhead system wide instead.

For this we are going to be using global atomic counters, but given that
memmap size is rarely modified, and normally is only modified either
during early boot when there is only one CPU, or under a hotplug global
mutex lock, therefore there is no need for per-cpu optimizations.

Also, while we are here rename nr_memmap to nr_memmap_pages, and
nr_memmap_boot to nr_memmap_boot_pages to be self explanatory that the
units are in page count.

[pasha.tatashin@soleen.com: address a few nits from David Hildenbrand]
  Link: https://lkml.kernel.org/r/20240809191020.1142142-4-pasha.tatashin@soleen.com
Link: https://lkml.kernel.org/r/20240809191020.1142142-4-pasha.tatashin@soleen.com
Link: https://lkml.kernel.org/r/20240808213437.682006-4-pasha.tatashin@soleen.com
Fixes: 15995a35 ("mm: report per-page metadata information")
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/linux-cxl/CAHj4cs9Ax1=CoJkgBGP_+sNu6-6=6v=_L-ZBZY0bVLD3wUWZQg@mail.gmail.comReported-by: Alison Schofield <alison.schofield@intel.com>
Closes: https://lore.kernel.org/linux-mm/Zq0tPd2h6alFz8XF@aschofie-mobl2/#tTested-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Fan Ni <fan.ni@samsung.com>
Cc: Joel Granados <j.granados@samsung.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Li Zhijian <lizhijian@fujitsu.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

/proc/vmstat contains events and stats, events can only grow, but stats
can grow and shrink.

vmstat has the following:
-------------------------
NR_VM_ZONE_STAT_ITEMS:	per-zone stats
NR_VM_NUMA_EVENT_ITEMS:	per-numa events
NR_VM_NODE_STAT_ITEMS:	per-numa stats
NR_VM_WRITEBACK_STAT_ITEMS:	system-wide background-writeback and
				dirty-throttling tresholds.
NR_VM_EVENT_ITEMS:	system-wide events
-------------------------

Rename NR_VM_WRITEBACK_STAT_ITEMS to NR_VM_STAT_ITEMS, to track the
system-wide stats, we are going to add per-page metadata stats to this
category in the next patch.

Also delete unused writeback_stat_name().

Link: https://lkml.kernel.org/r/20240809191020.1142142-2-pasha.tatashin@soleen.com
Link: https://lkml.kernel.org/r/20240808213437.682006-3-pasha.tatashin@soleen.com
Fixes: 15995a35 ("mm: report per-page metadata information")
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Suggested-by: Yosry Ahmed <yosryahmed@google.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Joel Granados <j.granados@samsung.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Li Zhijian <lizhijian@fujitsu.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yi Zhang <yi.zhang@redhat.com>
Cc: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "Fixes for memmap accounting", v4.

Memmap accounting provides us with observability of how much memory is
used for per-page metadata: i.e. "struct page"'s and "struct page_ext".
It also provides with information of how much was allocated using
boot allocator (i.e. not part of MemTotal), and how much was allocated
using buddy allocated (i.e. part of MemTotal).

This small series fixes a few problems that were discovered with the
original patch.


This patch (of 3):

When we fail to allocate the mmemmap in alloc_vmemmap_page_list(), do not
account any already-allocated pages: we're going to free all them before
we return from the function.

Link: https://lkml.kernel.org/r/20240809191020.1142142-1-pasha.tatashin@soleen.com
Link: https://lkml.kernel.org/r/20240808213437.682006-1-pasha.tatashin@soleen.com
Link: https://lkml.kernel.org/r/20240808213437.682006-2-pasha.tatashin@soleen.com
Fixes: 15995a35 ("mm: report per-page metadata information")
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Muchun Song <muchun.song@linux.dev>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Joel Granados <j.granados@samsung.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Li Zhijian <lizhijian@fujitsu.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

We recently made GUP's common page table walking code to also walk hugetlb
VMAs without most hugetlb special-casing, preparing for the future of
having less hugetlb-specific page table walking code in the codebase. 
Turns out that we missed one page table locking detail: page table locking
for hugetlb folios that are not mapped using a single PMD/PUD.

Assume we have hugetlb folio that spans multiple PTEs (e.g., 64 KiB
hugetlb folios on arm64 with 4 KiB base page size).  GUP, as it walks the
page tables, will perform a pte_offset_map_lock() to grab the PTE table
lock.

However, hugetlb that concurrently modifies these page tables would
actually grab the mm->page_table_lock: with USE_SPLIT_PTE_PTLOCKS, the
locks would differ.  Something similar can happen right now with hugetlb
folios that span multiple PMDs when USE_SPLIT_PMD_PTLOCKS.

This issue can be reproduced [1], for example triggering:

[ 3105.936100] ------------[ cut here ]------------
[ 3105.939323] WARNING: CPU: 31 PID: 2732 at mm/gup.c:142 try_grab_folio+0x11c/0x188
[ 3105.944634] Modules linked in: [...]
[ 3105.974841] CPU: 31 PID: 2732 Comm: reproducer Not tainted 6.10.0-64.eln141.aarch64 #1
[ 3105.980406] Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-4.fc40 05/24/2024
[ 3105.986185] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 3105.991108] pc : try_grab_folio+0x11c/0x188
[ 3105.994013] lr : follow_page_pte+0xd8/0x430
[ 3105.996986] sp : ffff80008eafb8f0
[ 3105.999346] x29: ffff80008eafb900 x28: ffffffe8d481f380 x27: 00f80001207cff43
[ 3106.004414] x26: 0000000000000001 x25: 0000000000000000 x24: ffff80008eafba48
[ 3106.009520] x23: 0000ffff9372f000 x22: ffff7a54459e2000 x21: ffff7a546c1aa978
[ 3106.014529] x20: ffffffe8d481f3c0 x19: 0000000000610041 x18: 0000000000000001
[ 3106.019506] x17: 0000000000000001 x16: ffffffffffffffff x15: 0000000000000000
[ 3106.024494] x14: ffffb85477fdfe08 x13: 0000ffff9372ffff x12: 0000000000000000
[ 3106.029469] x11: 1fffef4a88a96be1 x10: ffff7a54454b5f0c x9 : ffffb854771b12f0
[ 3106.034324] x8 : 0008000000000000 x7 : ffff7a546c1aa980 x6 : 0008000000000080
[ 3106.038902] x5 : 00000000001207cf x4 : 0000ffff9372f000 x3 : ffffffe8d481f000
[ 3106.043420] x2 : 0000000000610041 x1 : 0000000000000001 x0 : 0000000000000000
[ 3106.047957] Call trace:
[ 3106.049522]  try_grab_folio+0x11c/0x188
[ 3106.051996]  follow_pmd_mask.constprop.0.isra.0+0x150/0x2e0
[ 3106.055527]  follow_page_mask+0x1a0/0x2b8
[ 3106.058118]  __get_user_pages+0xf0/0x348
[ 3106.060647]  faultin_page_range+0xb0/0x360
[ 3106.063651]  do_madvise+0x340/0x598

Let's make huge_pte_lockptr() effectively use the same PT locks as any
core-mm page table walker would.  Add ptep_lockptr() to obtain the PTE
page table lock using a pte pointer -- unfortunately we cannot convert
pte_lockptr() because virt_to_page() doesn't work with kmap'ed page tables
we can have with CONFIG_HIGHPTE.

Handle CONFIG_PGTABLE_LEVELS correctly by checking in reverse order, such
that when e.g., CONFIG_PGTABLE_LEVELS==2 with
PGDIR_SIZE==P4D_SIZE==PUD_SIZE==PMD_SIZE will work as expected.  Document
why that works.

There is one ugly case: powerpc 8xx, whereby we have an 8 MiB hugetlb
folio being mapped using two PTE page tables.  While hugetlb wants to take
the PMD table lock, core-mm would grab the PTE table lock of one of both
PTE page tables.  In such corner cases, we have to make sure that both
locks match, which is (fortunately!) currently guaranteed for 8xx as it
does not support SMP and consequently doesn't use split PT locks.

[1] https://lore.kernel.org/all/1bbfcc7f-f222-45a5-ac44-c5a1381c596d@redhat.com/

Link: https://lkml.kernel.org/r/20240801204748.99107-1-david@redhat.com
Fixes: 9cb28da5 ("mm/gup: handle hugetlb in the generic follow_page_mask code")
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

is_madv_discard did its check wrong. MADV_ flags are not bitwise,
they're normal sequential numbers. So, for instance:
	behavior & (/* ... */ | MADV_REMOVE)

tagged both MADV_REMOVE and MADV_RANDOM (bit 0 set) as discard
operations.

As a result the kernel could erroneously block certain madvises (e.g
MADV_RANDOM or MADV_HUGEPAGE) on sealed VMAs due to them sharing bits
with blocked MADV operations (e.g REMOVE or WIPEONFORK).

This is obviously incorrect, so use a switch statement instead.

Link: https://lkml.kernel.org/r/20240807173336.2523757-1-pedro.falcato@gmail.com
Link: https://lkml.kernel.org/r/20240807173336.2523757-2-pedro.falcato@gmail.com
Fixes: 8be7258a ("mseal: add mseal syscall")
Signed-off-by: Pedro Falcato <pedro.falcato@gmail.com>
Tested-by: Jeff Xu <jeffxu@chromium.org>
Reviewed-by: Jeff Xu <jeffxu@chromium.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Pull x86 fixes from Thomas Gleixner:

 - Fix 32-bit PTI for real.

   pti_clone_entry_text() is called twice, once before initcalls so that
   initcalls can use the user-mode helper and then again after text is
   set read only. Setting read only on 32-bit might break up the PMD
   mapping, which makes the second invocation of pti_clone_entry_text()
   find the mappings out of sync and failing.

   Allow the second call to split the existing PMDs in the user mapping
   and synchronize with the kernel mapping.

 - Don't make acpi_mp_wake_mailbox read-only after init as the mail box
   must be writable in the case that CPU hotplug operations happen after
   boot. Otherwise the attempt to start a CPU crashes with a write to
   read only memory.

 - Add a missing sanity check in mtrr_save_state() to ensure that the
   fixed MTRR MSRs are supported.

   Otherwise mtrr_save_state() ends up in a #GP, which is fixed up, but
   the WARN_ON() can bring systems down when panic on warn is set.

* tag 'x86-urgent-2024-08-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mtrr: Check if fixed MTRRs exist before saving them
  x86/paravirt: Fix incorrect virt spinlock setting on bare metal
  x86/acpi: Remove __ro_after_init from acpi_mp_wake_mailbox
  x86/mm: Fix PTI for i386 some more

Pull time keeping fixes from Thomas Gleixner:

 - Fix a couple of issues in the NTP code where user supplied values are
   neither sanity checked nor clamped to the operating range. This
   results in integer overflows and eventualy NTP getting out of sync.

   According to the history the sanity checks had been removed in favor
   of clamping the values, but the clamping never worked correctly under
   all circumstances. The NTP people asked to not bring the sanity
   checks back as it might break existing applications.

   Make the clamping work correctly and add it where it's missing

 - If adjtimex() sets the clock it has to trigger the hrtimer subsystem
   so it can adjust and if the clock was set into the future expire
   timers if needed. The caller should provide a bitmask to tell
   hrtimers which clocks have been adjusted.

   adjtimex() uses not the proper constant and uses CLOCK_REALTIME
   instead, which is 0. So hrtimers adjusts only the clocks, but does
   not check for expired timers, which might make them expire really
   late. Use the proper bitmask constant instead.

* tag 'timers-urgent-2024-08-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timekeeping: Fix bogus clock_was_set() invocation in do_adjtimex()
  ntp: Safeguard against time_constant overflow
  ntp: Clamp maxerror and esterror to operating range

Pull irq fixes from Thomas Gleixner:
 "Three small fixes for interrupt core and drivers:

   - The interrupt core fails to honor caller supplied affinity hints
     for non-managed interrupts and uses the system default affinity on
     startup instead. Set the missing flag in the descriptor to tell the
     core to use the provided affinity.

   - Fix a shift out of bounds error in the Xilinx driver

   - Handle switching to level trigger correctly in the RISCV APLIC
     driver. It failed to retrigger the interrupt which causes it to
     become stale"

* tag 'irq-urgent-2024-08-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/riscv-aplic: Retrigger MSI interrupt on source configuration
  irqchip/xilinx: Fix shift out of bounds
  genirq/irqdesc: Honor caller provided affinity in alloc_desc()

Pull USB fixes from Greg KH:
 "Here are a number of small USB driver fixes for reported issues for
  6.11-rc3. Included in here are:

   - usb serial driver MODULE_DESCRIPTION() updates

   - usb serial driver fixes

   - typec driver fixes

   - usb-ip driver fix

   - gadget driver fixes

   - dt binding update

  All of these have been in linux-next with no reported issues"

* tag 'usb-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: typec: ucsi: Fix a deadlock in ucsi_send_command_common()
  usb: typec: tcpm: avoid sink goto SNK_UNATTACHED state if not received source capability message
  usb: gadget: f_fs: pull out f->disable() from ffs_func_set_alt()
  usb: gadget: f_fs: restore ffs_func_disable() functionality
  USB: serial: debug: do not echo input by default
  usb: typec: tipd: Delete extra semi-colon
  usb: typec: tipd: Fix dereferencing freeing memory in tps6598x_apply_patch()
  usb: gadget: u_serial: Set start_delayed during suspend
  usb: typec: tcpci: Fix error code in tcpci_check_std_output_cap()
  usb: typec: fsa4480: Check if the chip is really there
  usb: gadget: core: Check for unset descriptor
  usb: vhci-hcd: Do not drop references before new references are gained
  usb: gadget: u_audio: Check return codes from usb_ep_enable and config_ep_by_speed.
  usb: gadget: midi2: Fix the response for FB info with block 0xff
  dt-bindings: usb: microchip,usb2514: Add USB2517 compatible
  USB: serial: garmin_gps: use struct_size() to allocate pkt
  USB: serial: garmin_gps: annotate struct garmin_packet with __counted_by
  USB: serial: add missing MODULE_DESCRIPTION() macros
  USB: serial: spcp8x5: remove unused struct 'spcp8x5_usb_ctrl_arg'

Pull tty / serial driver fixes from Greg KH:
 "Here are some small tty and serial driver fixes for reported problems
  for 6.11-rc3. Included in here are:

   - sc16is7xx serial driver fixes

   - uartclk bugfix for a divide by zero issue

   - conmakehash userspace build issue fix

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: vt: conmakehash: cope with abs_srctree no longer in env
  serial: sc16is7xx: fix invalid FIFO access with special register set
  serial: sc16is7xx: fix TX fifo corruption
  serial: core: check uartclk for zero to avoid divide by zero

Merge tag 'driver-core-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core / documentation fixes from Greg KH:
 "Here are some small fixes, and some documentation updates for
  6.11-rc3. Included in here are:

   - embargoed hardware documenation updates based on a lot of review by
     legal-types in lots of companies to try to make the process a _bit_
     easier for us to manage over time.

   - rust firmware documentation fix

   - driver detach race fix for the fix that went into 6.11-rc1

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  driver core: Fix uevent_show() vs driver detach race
  Documentation: embargoed-hardware-issues.rst: add a section documenting the "early access" process
  Documentation: embargoed-hardware-issues.rst: minor cleanups and fixes
  rust: firmware: fix invalid rustdoc link

Pull char/misc fixes from Greg KH:
 "Here are some small char/misc/other driver fixes for 6.11-rc3 for
  reported issues. Included in here are:

   - binder driver fixes

   - fsi MODULE_DESCRIPTION() additions (people seem to love them...)

   - eeprom driver fix

   - Kconfig dependency fix to resolve build issues

   - spmi driver fixes

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'char-misc-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  spmi: pmic-arb: add missing newline in dev_err format strings
  spmi: pmic-arb: Pass the correct of_node to irq_domain_add_tree
  binder_alloc: Fix sleeping function called from invalid context
  binder: fix descriptor lookup for context manager
  char: add missing NetWinder MODULE_DESCRIPTION() macros
  misc: mrvl-cn10k-dpi: add PCI_IOV dependency
  eeprom: ee1004: Fix locking issues in ee1004_probe()
  fsi: add missing MODULE_DESCRIPTION() macros

Pull SCSI fixes from James Bottomley:
 "Two core fixes: one to prevent discard type changes (seen on iSCSI)
  during intermittent errors and the other is fixing a lockdep problem
  caused by the queue limits change.

  And one driver fix in ufs"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: sd: Keep the discard mode stable
  scsi: sd: Move sd_read_cpr() out of the q->limits_lock region
  scsi: ufs: core: Fix hba->last_dme_cmd_tstamp timestamp updating logic

Pull nfsd fixes from Chuck Lever:

 - Two minor fixes for recent changes

* tag 'nfsd-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  nfsd: don't set SVC_SOCK_ANONYMOUS when creating nfsd sockets
  sunrpc: avoid -Wformat-security warning

Pull i2c fixes from Wolfram Sang:

 - Two fixes for SMBusAlert handling in the I2C core: one to avoid an
   endless loop when scanning for handlers and one to make sure handlers
   are always called even if HW has broken behaviour

 - I2C header build fix for when ACPI is enabled but I2C isn't

 - The testunit gets a rename in the code to match the documentation

 - Two fixes for the Qualcomm GENI I2C controller are cleaning up the
   error exit patch in the runtime_resume() function. The first is
   disabling the clock, the second disables the icc on the way out

* tag 'i2c-for-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: testunit: match HostNotify test name with docs
  i2c: qcom-geni: Add missing geni_icc_disable in geni_i2c_runtime_resume
  i2c: qcom-geni: Add missing clk_disable_unprepare in geni_i2c_runtime_resume
  i2c: Fix conditional for substituting empty ACPI functions
  i2c: smbus: Send alert notifications to all devices if source not found
  i2c: smbus: Improve handling of stuck alerts

Pull dma-mapping fix from Christoph Hellwig:

 - avoid a deadlock with dma-debug and netconsole (Rik van Riel)

* tag 'dma-mapping-6.11-2024-08-10' of git://git.infradead.org/users/hch/dma-mapping:
  dma-debug: avoid deadlock between dma debug vs printk and netconsole

Pull more bcachefs fixes from Kent Overstreet:
 "A couple last minute fixes for the new disk accounting

   - fix a bug that was causing ACLs to seemingly "disappear"

   - new on disk format version, bcachefs_metadata_version_disk_accounting_v3

     bcachefs_metadata_version_disk_accounting_v2 accidentally included
     padding in disk_accounting_key; fortunately, 6.11 isn't out yet so
     we can fix this with another version bump"

* tag 'bcachefs-2024-08-10' of git://evilpiepirate.org/bcachefs:
  bcachefs: bcachefs_metadata_version_disk_accounting_v3
  bcachefs: improve bch2_dev_usage_to_text()
  bcachefs: bch2_accounting_invalid()
  bcachefs: Switch to .get_inode_acl()

The section 4.5.2 of the RISC-V AIA specification says that "any write
to a sourcecfg register of an APLIC might (or might not) cause the
corresponding interrupt-pending bit to be set to one if the rectified
input value is high (= 1) under the new source mode."

When the interrupt type is changed in the sourcecfg register, the APLIC
device might not set the corresponding pending bit, so the interrupt might
never become pending.

To handle sourcecfg register changes for level-triggered interrupts in MSI
mode, manually set the pending bit for retriggering interrupt so it gets
retriggered if it was already asserted.

Fixes: ca8df97f ("irqchip/riscv-aplic: Add support for MSI-mode")
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240809071049.2454-1-yongxuan.wang@sifive.com

The device tree property 'xlnx,kind-of-intr' is sanity checked that the
bitmask contains only set bits which are in the range of the number of
interrupts supported by the controller.

The check is done by shifting the mask right by the number of supported
interrupts and checking the result for zero.

The data type of the mask is u32 and the number of supported interrupts is
up to 32. In case of 32 interrupts the shift is out of bounds, resulting in
a mismatch warning. The out of bounds condition is also reported by UBSAN:

  UBSAN: shift-out-of-bounds in irq-xilinx-intc.c:332:22
  shift exponent 32 is too large for 32-bit type 'unsigned int'

Fix it by promoting the mask to u64 for the test.

Fixes: d50466c9 ("microblaze: intc: Refactor DT sanity check")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/1723186944-3571957-1-git-send-email-radhey.shyam.pandey@amd.com

Pull smb client fixes from Steve French:

 - DFS fix

 - fix for security flags for requiring encryption

 - minor cleanup

* tag '6.11-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: cifs_inval_name_dfs_link_error: correct the check for fullpath
  Fix spelling errors in Server Message Block
  smb3: fix setting SecurityFlags when encryption is required

Pull spi fixes from Mark Brown:
 "A few SPI fixes: clock rate calculation fixes for the Kunpeng and lpsi
  drivers and a missing registration of a device ID for spidev (which
  had only been updated for DT cases, causing warnings)"

* tag 'spi-fix-v6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: spi-fsl-lpspi: Fix scldiv calculation
  spi: spidev: Add missing spi_device_id for bh2228fv
  spi: hisi-kunpeng: Add verification for the max_frequency provided by the firmware
  spi: hisi-kunpeng: Add validation for the minimum value of speed_hz

bcachefs_metadata_version_disk_accounting_v2 erroneously had padding
bytes in disk_accounting_key, which is a problem because we have to
guarantee that all unused bytes in disk_accounting_key are zeroed.

Fortunately 6.11 isn't out yet, so it's cheap to fix this by spinning a
new version.
Reported-by: Gabriel de Perthuis <g2p.code@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Pull drm fixes from Dave Airlie:
 "Weekly regular fixes, mostly amdgpu with i915/xe having a few each,
  and then some misc bits across the board, seems about right for rc3
  time.

  client:
   - fix null ptr deref

  bridge:
   - connector: fix double free

  atomic:
   - fix async flip update

  panel:
   - document panel

  omap:
   - add config dependency

  tests:
   - fix gem shmem test

  drm buddy:
   - Add start address to trim function

  amdgpu:
   - DMCUB fix
   - Fix DET programming on some DCNs
   - DCC fixes
   - DCN 4.0.1 fixes
   - SMU 14.0.x update
   - MMHUB fix
   - DCN 3.1.4 fix
   - GC 12.0 fixes
   - Fix soft recovery error propogation
   - SDMA 7.0 fixes
   - DSC fix

  xe:
   - Fix off-by-one when processing RTP rules
   - Use dma_fence_chain_free in chain fence unused as a sync
   - Fix PL1 disable flow in xe_hwmon_power_max_write
   - Take ref to VM in delayed dump snapshot

  i915:
   - correct dual pps handling for MTL_PCH+ [display]
   - Adjust vma offset for framebuffer mmap offset [gem]
   - Fix Virtual Memory mapping boundaries calculation [gem]
   - Allow evicting to use the requested placement
   - Attempt to get pages without eviction first"

* tag 'drm-fixes-2024-08-10' of https://gitlab.freedesktop.org/drm/kernel: (31 commits)
  drm/xe: Take ref to VM in delayed snapshot
  drm/xe/hwmon: Fix PL1 disable flow in xe_hwmon_power_max_write
  drm/xe: Use dma_fence_chain_free in chain fence unused as a sync
  drm/xe/rtp: Fix off-by-one when processing rules
  drm/amdgpu: Add DCC GFX12 flag to enable address alignment
  drm/amdgpu: correct sdma7 max dw
  drm/amdgpu: Add address alignment support to DCC buffers
  drm/amd/display: Skip Recompute DSC Params if no Stream on Link
  drm/amdgpu: change non-dcc buffer copy configuration
  drm/amdgpu: Forward soft recovery errors to userspace
  drm/amdgpu: add golden setting for gc v12
  drm/buddy: Add start address support to trim function
  drm/amd/display: Add missing program DET segment call to pipe init
  drm/amd/display: Add missing DCN314 to the DML Makefile
  drm/amdgpu: force to use legacy inv in mmhub
  drm/amd/pm: update powerplay structure on smu v14.0.2/3
  drm/amd/display: Add missing mcache registers
  drm/amd/display: Add dcc propagation value
  drm/amd/display: Add missing DET segments programming
  drm/amd/display: Replace dm_execute_dmub_cmd with dc_wake_and_execute_dmub_cmd
  ...

Add a line for capacity
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Implement bch2_accounting_invalid(); check for junk at the end, and
replicas accounting entries in particular need to be checked or we'll
pop asserts later.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Pull cpumask fix from Yury Norov:
 "Fix for cpumask merge"

[ Mea culpa, this was my mismerge due to too much cut-and-paste - Linus ]

* tag 'bitmap-6.11-rc' of https://github.com/norov/linux:
  cpumask: Fix crash on updating CPU enabled mask

Pull power management fix from Rafael Wysocki:
 "Change the default EPP (energy-performence preference) value for the
  Emerald Rapids processor in the intel_pstate driver.

  Thisshould improve both the performance and energy efficiency (Pedro
  Henrique Kopper)"

* tag 'pm-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: intel_pstate: Update Balance performance EPP for Emerald Rapids

Merge tag 'asm-generic-fixes-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic fixes from Arnd Bergmann:
 "There are two more changes to the syscall.tbl conversion: the
  '__NR_newfstat' in the previous bugfix was a mistake and gets reverted
  now, after triple-checking that the contents are now back to what they
  were on all architectures. The __NR_nfsservctl definition is not
  really needed but came up in the same discussion as it had previously
  been defined in uapi/asm-generic/unistd.h and tested for in user
  space.

  There are a few more symbols that used to be defined in the old
  unistd.h file, but that are never defined on any other architecture
  using syscall.tbl format. These used to be needed inside of the
  kernel:

     __NR_syscalls
     __NR_arch_specific_syscall
     __NR3264_*

  Searching for these on https://codesearch.debian.net/ shows a few
  packages (rustc, golang, clamav, libseccomp, librsvg, strace) that
  duplicate all the macros from asm/unistd.h, but nothing that actually
  uses the macros, so I concluded that they are fine to omit after all"

* tag 'asm-generic-fixes-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  syscalls: add back legacy __NR_nfsservctl macro
  syscalls: fix fstat() entry again

Pull ARM SoC fixes from Arnd Bergmann:
 "There are three sets of patches for the soc tree:

   - Marek Behún addresses multiple build time regressions caused by
     changes to the cznic turris-omnia support

   - Dmitry Torokhov fixes a regression in the legacy "gumstix" board
     code he cleaned up earlier

   - The TI K3 maintainers found multiple bugs in the in gpio, audio and
     pcie devicetree nodes"

* tag 'arm-fixes-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: pxa/gumstix: fix attaching properties to vbus gpio device
  doc: platform: cznic: turris-omnia-mcu: Use double backticks for attribute value
  doc: platform: cznic: turris-omnia-mcu: Fix sphinx-build warning
  platform: cznic: turris-omnia-mcu: Make GPIO code optional
  platform: cznic: turris-omnia-mcu: Make poweroff and wakeup code optional
  platform: cznic: turris-omnia-mcu: Make TRNG code optional
  platform: cznic: turris-omnia-mcu: Make watchdog code optional
  arm64: dts: ti: k3-j784s4-main: Correct McASP DMAs
  arm64: dts: ti: k3-j722s: Fix gpio-range for main_pmx0
  arm64: dts: ti: k3-am62p: Fix gpio-range for main_pmx0
  arm64: dts: ti: k3-am62p: Add gpio-ranges for mcu_gpio0
  arm64: dts: ti: k3-am62-verdin-dahlia: Keep CTRL_SLEEP_MOCI# regulator on
  arm64: dts: ti: k3-j784s4-evm: Consolidate serdes0 references
  arm64: dts: ti: k3-j784s4-evm: Assign only lanes 0 and 1 to PCIe1

Merge tag 'probes-fixes-v6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull kprobe fixes from Masami Hiramatsu:

 - Fix misusing str_has_prefix() parameter order to check symbol prefix
   correctly

 - bpf: remove unused declaring of bpf_kprobe_override

* tag 'probes-fixes-v6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  kprobes: Fix to check symbol prefixes correctly
  bpf: kprobe: remove unused declaring of bpf_kprobe_override

Pull block fixes from Jens Axboe:
 "Just a set of cleanups for blk-throttle and nvme structures"

* tag 'block-6.11-20240809' of git://git.kernel.dk/linux:
  nvme: reorganize nvme_ns_head fields
  nvme: change data type of lba_shift
  nvme: remove a field from nvme_ns_head
  nvme: remove unused parameter
  blk-throttle: remove more latency dead-code

Pull io_uring fixes from Jens Axboe:
 "Nothing major in here, just two fixes for ensuring that bundle
  recv/send requests always get marked for cleanups, and a single fix to
  ensure that sends with provided buffers only pick a single buffer
  unless the bundle option has been enabled"

* tag 'io_uring-6.11-20240809' of git://git.kernel.dk/linux:
  io_uring/net: don't pick multiple buffers for non-bundle send
  io_uring/net: ensure expanded bundle send gets marked for cleanup
  io_uring/net: ensure expanded bundle recv gets marked for cleanup