- 31 Jan, 2016 2 commits
-
-
Pablo Neira Ayuso authored
Since bd678e09 ("netfilter: nfnetlink: fix splat due to incorrect socket memory accounting in skbuff clones"), we don't manually attach the sk to the skbuff clone anymore, so we have to use the original skbuff from netlink_ack() which needs to access the sk pointer. Fixes: bd678e09 ("netfilter: nfnetlink: fix splat due to incorrect socket memory accounting in skbuff clones") Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
Ulrich reports soft lockup with following (shortened) callchain: NMI watchdog: BUG: soft lockup - CPU#1 stuck for 22s! __netif_receive_skb_core+0x6e4/0x774 process_backlog+0x94/0x160 net_rx_action+0x88/0x178 call_do_softirq+0x24/0x3c do_softirq+0x54/0x6c __local_bh_enable_ip+0x7c/0xbc nf_ct_iterate_cleanup+0x11c/0x22c [nf_conntrack] masq_inet_event+0x20/0x30 [nf_nat_masquerade_ipv6] atomic_notifier_call_chain+0x1c/0x2c ipv6_del_addr+0x1bc/0x220 [ipv6] Problem is that nf_ct_iterate_cleanup can run for a very long time since it can be interrupted by softirq processing. Moreover, atomic_notifier_call_chain runs with rcu readlock held. So lets call cond_resched() in nf_ct_iterate_cleanup and defer the call to a work queue for the atomic_notifier_call_chain case. We also need another cond_resched in get_next_corpse, since we have to deal with iter() always returning false, in that case get_next_corpse will walk entire conntrack table. Reported-by:
Ulrich Weber <uw@ocedo.com> Tested-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
- 30 Jan, 2016 25 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothDavid S. Miller authored
Johan Hedberg says: ==================== pull request: bluetooth 2016-01-30 Here's a set of important Bluetooth fixes for the 4.5 kernel: - Two fixes to 6LoWPAN code (one fixing a potential crash) - Fix LE pairing with devices using both public and random addresses - Fix allocation of dynamic LE PSM values - Fix missing COMPATIBLE_IOCTL for UART line discipline Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Yuchung Cheng authored
RFC 4015 section 3.4 says the TCP sender MUST refrain from reversing the congestion control state when the ACK signals congestion through the ECN-Echo flag. Currently we may not always do that when prior_ssthresh is reset upon receiving ACKs with ECE marks. This patch fixes that. Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
WANG Cong authored
self->ctrl_skb is protected by self->spinlock, we should not access it out of the lock. Move the debugging printk inside. Reported-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
David S. Miller authored
Arnd Bergmann says: ==================== network driver fixes This is an updated series of fixes for the network device drivers that showed warnings in ARM randconfig. Changes since v1 are: dropped "net: macb: avoid uninitialized variables", already fixed in net-next dropped "net: fddi/defxx: avoid warning about uninitialized variable use", already fixed in net-next added missing barriers in "net: moxart: use correct accessors for DMA memory" clarified "net: bgmac: clarify CONFIG_BCMA dependency" changelog ==================== Signed-off-by: -
Arnd Bergmann authored
The tg3_set_eeprom() function correctly initializes the 'start' variable, but gcc generates a false warning: drivers/net/ethernet/broadcom/tg3.c: In function 'tg3_set_eeprom': drivers/net/ethernet/broadcom/tg3.c:12057:4: warning: 'start' may be used uninitialized in this function [-Wmaybe-uninitialized] I have not come up with a way to restructure the code in a way that avoids the warning without making it less readable, so this adds an initialization for the declaration to shut up that warning. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
The nb8800_poll() function initializes the 'next' variable in the loop looking for new input data. We know this will be called at least once because 'budget' is a guaranteed to be a positive number when we enter the function, but the compiler doesn't know that and warns when the variable is used later: drivers/net/ethernet/aurora/nb8800.c: In function 'nb8800_poll': drivers/net/ethernet/aurora/nb8800.c:350:21: warning: 'next' may be used uninitialized in this function [-Wmaybe-uninitialized] Changing the 'while() {}' loop to 'do {} while()' makes it obvious to the compiler what is going on so it no longer warns. Signed-off-by:Mans Rullgard <mans@mansr.com> Signed-off-by:
-
Arnd Bergmann authored
When CONFIG_PCI_MSI is disabled, we get warnings about unused functions in the vxge driver: drivers/net/ethernet/neterion/vxge/vxge-main.c:2121:13: warning: 'adaptive_coalesce_tx_interrupts' defined but not used [-Wunused-function] drivers/net/ethernet/neterion/vxge/vxge-main.c:2149:13: warning: 'adaptive_coalesce_rx_interrupts' defined but not used [-Wunused-function] We could add another #ifdef here, but it's nicer to avoid those warnings for good by converting the existing #ifdef to if(IS_ENABLED()), which has the same effect but provides better compile-time coverage in general, and lets the compiler understand better when the function is intentionally unused. Signed-off-by:
-
Arnd Bergmann authored
The bgmac driver depends on BCMA_HOST_SOC, which is only used when CONFIG_BCMA is enabled. However, it is a bool option and can be set when CONFIG_BCMA=m, and then bgmac can be built-in, leading to an obvious link error: drivers/built-in.o: In function `bgmac_init': :(.init.text+0x7f2c): undefined reference to `__bcma_driver_register' drivers/built-in.o: In function `bgmac_exit': :(.exit.text+0x110a): undefined reference to `bcma_driver_unregister' To avoid this case, we need to depend on both BCMA and BCMA_SOC, as this patch does. I'm also trying to make the dependency more readable by splitting it into three lines, and adding a COMPILE_TEST alternative so we can test-build it in all configurations that support BCMA. The added dependency on FIXED_PHY addresses a related issue where we cannot call fixed_phy_register() when CONFIG_FIXED_PHY=m and CONFIG_BGMAC=y. Signed-off-by:
-
Arnd Bergmann authored
Building the hp100 ethernet driver causes warnings when both the PCI and EISA drivers are disabled: ethernet/hp/hp100.c: In function 'hp100_module_init': ethernet/hp/hp100.c:3047:2: warning: label 'out3' defined but not used [-Wunused-label] ethernet/hp/hp100.c: At top level: ethernet/hp/hp100.c:2828:13: warning: 'cleanup_dev' defined but not used [-Wunused-function] We can easily avoid the warnings and make the driver look slightly nicer by removing the #ifdefs that check for the CONFIG_PCI and CONFIG_EISA, as all the registration functions are designed to have no effect when the buses are disabled. Signed-off-by:
-
Arnd Bergmann authored
The davinci_cpdma mixes up physical addresses as seen from the CPU and DMA addresses as seen from a DMA master, since it can operate on both normal memory or an on-chip buffer. If dma_addr_t is different from phys_addr_t, this means we get a compile-time warning about the type mismatch: ethernet/ti/davinci_cpdma.c: In function 'cpdma_desc_pool_create': ethernet/ti/davinci_cpdma.c:182:48: error: passing argument 3 of 'dma_alloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types] pool->cpumap = dma_alloc_coherent(dev, size, &pool->phys, In file included from ethernet/ti/davinci_cpdma.c:21:0: dma-mapping.h:398:21: note: expected 'dma_addr_t * {aka long long unsigned int *}' but argument is of type 'phys_addr_t * {aka unsigned int *}' static inline void *dma_alloc_coherent(struct device *dev, size_t size, This slightly restructures the code so the address we use for mapping RAM into a DMA address is always a dma_addr_t, avoiding the warning. The code is correct even if both types are 32-bit because the DMA master in this device only supports 32-bit addressing anyway, independent of the types that are used. We still assign this value to pool->phys, and that is wrong if the driver is ever used with an IOMMU, but that value appears to be never used, so there is no problem really. I've added a couple of comments about where we do things that are slightly violating the API. Signed-off-by: -
David S. Miller authored
Paolo Abeni says: ==================== ipv6: fix sticky pktinfo behaviour Currently: ip addr add dev eth0 2001:0010::1/64 ip addr add dev eth1 2001:0020::1/64 ping6 -I eth0 2001:0020::2 do not lead to the expected results, i.e. eth1 is used as the egress interface. This is due to two related issues in handling sticky pktinfo, used by ping6 to enforce the device binding: - ip6_dst_lookup_flow()/ip6_dst_lookup_tail() do not really enforce flowi6_oif match - ipv6 udp connect() just ignore flowi6_oif These patches address each issue individually. The kernel has never enforced the egress interface specified via the sticky pktinfo, except briefly between the commits 741a11d9 ("net: ipv6: Add RT6_LOOKUP_F_IFACE flag if oif is set") and d46a9d67 ("net: ipv6: Dont add RT6_LOOKUP_F_IFACE flag if saddr set"), but the ping6 tools was unaffected up to iputils-20100214, since before it used SO_BINDTODEVICE to enforce the egress interface. ==================== Signed-off-by:
-
Paolo Abeni authored
Currently, the egress interface index specified via IPV6_PKTINFO is ignored by __ip6_datagram_connect(), so that RFC 3542 section 6.7 can be subverted when the user space application calls connect() before sendmsg(). Fix it by initializing properly flowi6_oif in connect() before performing the route lookup. Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Paolo Abeni authored
The current implementation of ip6_dst_lookup_tail basically ignore the egress ifindex match: if the saddr is set, ip6_route_output() purposefully ignores flowi6_oif, due to the commit d46a9d67 ("net: ipv6: Dont add RT6_LOOKUP_F_IFACE flag if saddr set"), if the saddr is 'any' the first route lookup in ip6_dst_lookup_tail fails, but upon failure a second lookup will be performed with saddr set, thus ignoring the ifindex constraint. This commit adds an output route lookup function variant, which allows the caller to specify lookup flags, and modify ip6_dst_lookup_tail() to enforce the ifindex match on the second lookup via said helper. ip6_route_output() becames now a static inline function build on top of ip6_route_output_flags(); as a side effect, out-of-tree modules need now a GPL license to access the output route lookup functionality. Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-for-davem-2016-01-29' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== iwlwifi * Fix support for 3168 device: * NVM version * firmware file name * device IDs * Fix a compilation warning in dvm calibration code * Fix the TPC (reduced Tx Power) code. This fixes performance issues * Add device IDs for 8265 rtx2x00 * fix monitor mode regression dating back to 4.1 brcmfmac * fix sdio initialisation related crash rtlwifi * rtl8821ae: Fix 5G failure when EEPROM is incorrectly encoded ath9k * ignore eeprom magic mismatch on flash based devices ==================== Signed-off-by:
-
Ken-ichirou MATSUZAWA authored
We should not trim skb for mmaped socket since its buf size is fixed and userspace will read as frame which data equals head. mmaped socket will not call recvmsg, means max_recvmsg_len is 0, skb_reserve was not called before commit: db65a3aa. Fixes: db65a3aa (netlink: Trim skb to alloc size to avoid MSG_TRUNC) Signed-off-by:
Ken-ichirou MATSUZAWA <chamas@h4.dion.ne.jp> Signed-off-by:
-
Li RongQing authored
The size of all_zeros_mac is 6 byte, but eth_hash() will access the 8 byte, and KASan reported the below bug: [ 8596.479031] BUG: KASan: out of bounds access in __vxlan_find_mac+0x24/0x100 at addr ffffffff841514c0 [ 8596.487647] Read of size 8 by task ip/52820 [ 8596.490818] Address belongs to variable all_zeros_mac+0x0/0x40 [ 8596.496051] CPU: 0 PID: 52820 Comm: ip Tainted: G WC 4.1.15 #1 [ 8596.503520] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 02/10/2014 [ 8596.509365] ffffffff841514c0 ffff88007450f0b8 ffffffff822fa5e1 0000000000000032 [ 8596.516112] ffff88007450f150 ffff88007450f138 ffffffff812dd58c ffff88007450f1d8 [ 8596.522856] ffffffff81113b80 0000000000000282 0000000000000001 ffffffff8101ee4d [ 8596.529599] Call Trace: [ 8596.530858] [<ffffffff822fa5e1>] dump_stack+0x4f/0x7b [ 8596.535080] [<ffffffff812dd58c>] kasan_report_error+0x3bc/0x3f0 [ 8596.540258] [<ffffffff81113b80>] ? __lock_acquire+0x90/0x2140 [ 8596.545245] [<ffffffff8101ee4d>] ? save_stack_trace+0x2d/0x80 [ 8596.550234] [<ffffffff812dda70>] kasan_report+0x40/0x50 [ 8596.554647] [<ffffffff81b211e4>] ? __vxlan_find_mac+0x24/0x100 [ 8596.559729] [<ffffffff812dc399>] __asan_load8+0x69/0xa0 [ 8596.564141] [<ffffffff81b211e4>] __vxlan_find_mac+0x24/0x100 [ 8596.569033] [<ffffffff81b2683d>] vxlan_fdb_create+0x9d/0x570 it can be fixed by enlarging the all_zeros_mac to 8 byte, although it is harmless; eth_hash() will be called in other place with the memory which is larger and equal to 8 byte. Signed-off-by:
Li RongQing <roy.qing.li@gmail.com> Signed-off-by:
-
Vivien Didelot authored
Currently the port based VLAN maps should be configured to allow every port to egress frames on all other ports, except themselves. The debugfs interface shows that they are misconfigured. For instance, a 7-port switch has the following content in the related register 0x06: GLOBAL GLOBAL2 SERDES 0 1 2 3 4 5 6 ... 6: 1fa4 1f0f 4 7f 7e 7d 7c 7b 7a 79 ... This means that port 3 is allowed to talk to port 2-6, but cannot talk to ports 0 and 1. With this fix, port 3 can correctly talk to all ports except 3 itself: GLOBAL GLOBAL2 SERDES 0 1 2 3 4 5 6 ... 6: 1fa4 1f0f 4 7e 7d 7b 77 6f 5f 3f ... Fixes: ede8098d ("net: dsa: mv88e6xxx: bridges do not need an FID") Reported-by:Kevin Smith <kevin.smith@elecsyscorp.com> Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Tested-by:
-
Alexander Duyck authored
The fib_table_lookup function had a shift by 32 that triggered a UBSAN warning. This was due to the fact that I had placed the shift first and then followed it with the check for the suffix length to ignore the undefined behavior. If we reorder this so that we verify the suffix is less than 32 before shifting the value we can avoid the issue. Reported-by:
Toralf Förster <toralf.foerster@gmx.de> Signed-off-by:
Alexander Duyck <aduyck@mirantis.com> Signed-off-by:
-
Arnd Bergmann authored
The moxart ethernet driver confuses coherent DMA buffers with MMIO registers. moxart_ether.c: In function 'moxart_mac_setup_desc_ring': moxart_ether.c:146:428: error: passing argument 1 of '__fswab32' makes integer from pointer without a cast [-Werror=int-conversion] moxart_ether.c:74:39: warning: incorrect type in argument 3 (different address spaces) moxart_ether.c:74:39: expected void *cpu_addr moxart_ether.c:74:39: got void [noderef] <asn:2>*tx_desc_base This leaves the basic logic alone and uses normal pointers for the virtual address of the descriptor. As we cannot use readl/writel to access them, we also introduce our own moxart_desc_read moxart_desc_write helpers that perform the same endianess swap as the original code, but without the address space conversion. The barriers are made explicit here where needed: Even in the worst-case scenario, we just have to use a rmb() after checking ownership so we don't read any input data before we are sure it is value, and we use wmb() before transferring ownership back to the device. Signed-off-by:
-
Arnd Bergmann authored
When CONFIG_PROC_FS, CONFIG_IP_PNP_BOOTP, CONFIG_IP_PNP_DHCP and CONFIG_IP_PNP_RARP are all disabled, we get a warning about the ic_proto_used variable being unused: net/ipv4/ipconfig.c:146:12: error: 'ic_proto_used' defined but not used [-Werror=unused-variable] This avoids the warning, by making the definition conditional on whether a dynamic IP configuration protocol is configured. If not, we know that the value is always zero, so we can optimize away the variable and all code that depends on it. Signed-off-by:
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Bug fixes. 3 small bug fix patches for net. ==================== Signed-off-by: -
Michael Chan authored
The ring index j is not wrapped properly at the end of the ring, causing it to reference pointers past the end of the ring. For proper loop termination and to access the ring properly, we need to increment j and mask it before referencing the ring entry. Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Michael Chan authored
This hardware counter is misleading as it counts dropped packets that don't match the hardware filters for unicast/broadcast/multicast. We will still report this counter in ethtool -S for diagnostics purposes. Signed-off-by:
-
Prashant Sreedharan authored
Use completion ring for ring free response from firmware. The response will be the last entry in the ring and we can free the ring after getting the response. This will guarantee no spurious DMA to freed memory. Signed-off-by:
Prashant Sreedharan <prashant@broadcom.com> Signed-off-by:
-
Bernie Harris authored
There are cases where qdisc_dequeue_peeked can return NULL, and the result is dereferenced later on in the function. Similarly to the other qdisc dequeue functions, check whether the skb pointer is NULL and if it is, goto out. Signed-off-by:
Bernie Harris <bernie.harris@alliedtelesis.co.nz> Reviewed-by:
-
- 29 Jan, 2016 13 commits
-
-
Kefeng Wang authored
Convert the driver to use ns_to_timespec64() and timespec64_to_ns() instead of open coding the same logic. Signed-off-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Jörg Thalheim authored
Signed-off-by:
Jörg Thalheim <joerg@higgsboson.tk> Signed-off-by:
-
Nikolay Aleksandrov authored
Currently when a macvlan is being initialized and the lower device is netif_carrier_ok(), the macvlan device doesn't run through rfc2863_policy() and is left with UNKNOWN operstate. Fix it by adding an unconditional linkwatch event for the new macvlan device. Similar fix is already used by the 8021q device (see register_vlan_dev()). Also fix the inconsistent state when the lower device has been down and its carrier was changed (when a device is down NETDEV_CHANGE doesn't get generated). The second issue can be seen f.e. when we have a macvlan on top of a 8021q device which has been down and its real device has been changing carrier states, after setting the 8021q device up, the macvlan device will have the same carrier state as it was before even though the 8021q can now have a different state. Example for case 1: 4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 $ ip l add l eth2 macvl0 type macvlan $ ip l set macvl0 up $ ip l sh macvl0 72: macvl0@eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether f6:0b:54:0a:9d:a3 brd ff:ff:ff:ff:ff:ff Example for case 2 (order is important): Prestate: eth2 UP/CARRIER, vlan1 down, vlan1-macvlan down $ ip l set vlan1-macvlan up $ ip l sh vlan1-macvlan 71: vlan1-macvlan@vlan1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 4a:b8:44:56:b9:b9 brd ff:ff:ff:ff:ff:ff [ eth2 loses CARRIER before vlan1 has been UP-ed ] $ ip l sh eth2 4: eth2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000 link/ether 52:54:00:bf:57:16 brd ff:ff:ff:ff:ff:ff $ ip l sh vlan1-macvlan 71: vlan1-macvlan@vlan1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 4a:b8:44:56:b9:b9 brd ff:ff:ff:ff:ff:ff $ ip l set vlan1 up $ ip l sh vlan1 70: vlan1@eth2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state LOWERLAYERDOWN mode DEFAULT group default qlen 1000 link/ether 52:54:00:bf:57:16 brd ff:ff:ff:ff:ff:ff $ ip l sh vlan1-macvlan 71: vlan1-macvlan@vlan1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 4a:b8:44:56:b9:b9 brd ff:ff:ff:ff:ff:ff vlan1-macvlan is still UP, still has carrier and is still in the same operstate as before. After the patch in case 1 macvl0 has state UP as it should and in case 2 vlan1-macvlan has state LOWERLAYERDOWN again as it should. Note that while the lower macvlan device is down their carrier and thus operstate can go out of sync but that will be fixed once the lower device goes up again. This behaviour seems to have been present since beginning of git history. Signed-off-by:Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Parthasarathy Bhuvaragan authored
In 'commit 7fe8097c ("tipc: fix nullpointer bug when subscribing to events")', we terminate the connection if the subscription creation fails. In the same commit, the subscription creation result was based on the value of the subscription pointer (set in the function) instead of the return code. Unfortunately, the same function tipc_subscrp_create() handles subscription cancel request. For a subscription cancellation request, the subscription pointer cannot be set. Thus if a subscriber has several subscriptions and cancels any of them, the connection is terminated. In this commit, we terminate the connection based on the return value of tipc_subscrp_create(). Fixes: commit 7fe8097c ("tipc: fix nullpointer bug when subscribing to events") Reviewed-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by:
-
Kefeng Wang authored
Convert the driver to use ns_to_timespec64() to keep consistency with timespec64_to_ns() instead of open coding the same logic. Signed-off-by:
-
Eric Dumazet authored
We should not assume a valid protocol header is present, as this is not the case for IPv4 fragments. Lets avoid extra cache line misses and potential bugs if we actually find a socket and incorrectly uses its dst. Signed-off-by:
-
Johan Hedberg authored
The commit cad20c27 was supposed to fix handling of devices first using public addresses and then switching to RPAs after pairing. Unfortunately it missed a couple of key places in the code. 1. When evaluating which devices should be removed from the existing white list we also need to consider whether we have an IRK for them or not, i.e. a call to hci_find_irk_by_addr() is needed. 2. In smp_notify_keys() we should not be requiring the knowledge of the RPA, but should simply keep the IRK around if the other conditions require it. Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org # 4.4+
-
Johan Hedberg authored
At least the l2cap_add_psm() routine depends on the source address type being properly set to know what auto-allocation ranges to use, so the assignment to l2cap_chan needs to happen before this. Signed-off-by:
-
Johan Hedberg authored
The LE dynamic PSM range is different from BR/EDR (0x0080 - 0x00ff) and doesn't have requirements relating to parity, so separate checks are needed. Signed-off-by:
-
Johan Hedberg authored
Having proper defines makes the code a bit readable, it also avoids duplicating hard-coded values since these are also needed when auto-allocating PSM values (in a subsequent patch). Signed-off-by:
-
David S. Miller authored
Andrew Lunn says: ==================== Part 2 of v4.5-rc1 phylib regression White list PHY compatible values which indicate PHYs. Issue a warning when one is encountered. Update the documentation to make it clear what is expected in the compatible string. v2: Fix Grammar, reword changelog, add Tested-by and Acked-by. ==================== Signed-off-by: -
Andrew Lunn authored
PHY devices may only list compatibility with clause 22, 45, and if they need to be more specific, their PHY identifier values. No other compatible strings are allowed. Make this clear in the documentation, and remove examples where make/model compatible strings are listed. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Andrew Lunn authored
Some phy nodes list a compatible value indicating the PHY make/model. This is never used to match the device to the driver. However it does confuse the code to separate a PHY from a generic MDIO device like a switch. Generic MDIO devices must have a compatible value, PHYs can list clause 22 or 45, but nothing else. Issue a warning if we find a compatible value known on the whitelist, and say it is a PHY. Fixes: a9049e0c ("mdio: Add support for mdio drivers.") Reported-by:
Aaro Koskinen <aaro.koskinen@nokia.com> Reported-by:
Olof Johansson <olof@lixom.net> Tested-by:
-
