- 06 Dec, 2016 15 commits
-
-
Michel Dänzer authored
Normally only necessary when the cursor size changes. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Michel Dänzer authored
The cursor size also affects the register programming. Cc: stable@vger.kernel.org Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Michel Dänzer authored
We were storing viewport relative coordinates. However, crtc_cursor_set2 and cursor_reset pass amdgpu_crtc->cursor_x/y as the x/y parameters of cursor_move_locked, which would break if the CRTC isn't located at (0, 0). Cc: stable@vger.kernel.org Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Arindam Nath authored
GUI idle interrupts should be enabled only after we have enabled coarse grain clock gating (CGCG). This prevents GFX engine generating idle interrupt even though CGCG is not completely enabled. Most of the time this goes un-noticed, but on some Stoney ASICs this results in GFX engine hang after system resumes from suspend. The issue is not particular to Stoney though and could have occured on any ASIC. The patch fixes this issue. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reported-by: Sunil Uttarwar <Sunil.Uttarwar1@amd.com> Signed-off-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
Maruthi Srinivas Bayyavarapu authored
VCE clocks are set to be disabled, when not in use. Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Rex Zhu authored
can't get uvd's state by uvd_enabled. uvd_enabled is used for request higher mclk. in multi-display case, mclk has been in highest clock, no matter uvd's state changed, uvd_enabled will not be changed. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Xiangliang Yu authored
Forget to check UCODE_ID_STORAGE case and will cause to print error message when loading driver, correct it. Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Xiangliang Yu authored
For virtualization, firmware loading need the firmware version info, and will load the right firmware. So, transfer fw_version to toc. Signed-off-by: Frank Min <Frank.Min@amd.com> Signed-off-by: Monk Liu <Monk.Liu@amd.com> Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Rex Zhu authored
the root cause is we gate the clock to uvd vcpu. mclk's change should need the response from uvd if it is power on. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Rex Zhu authored
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
It's per queue not per pipe. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
This reverts commit a693e050. This breaks on systems with huge amounts of system memory as we do not have enough vram to store the page tables. Additionally, this is less of an issue with the recent gtt manager changes. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Dave Airlie authored
Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next Just refactoring HDMI driver by using infoframe helper function, fixing GSC Kconfig dependency issue and including trivial cleanups. * 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: Use VIDEO_SAMSUNG_EXYNOS_GSC=n as GSC Kconfig dependency drm/exynos: gsc: fix spelling mistakes exynos-drm: Fix error messages to print flags and size drm/exynos/hdmi: refactor infoframe code
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
- lots of code cleanup - lots of bug fixes - expose rpm based fan info via hwmon - lots of clock and powergating fixes - SI register header cleanup and conversion to common format used by newer asics * 'drm-next-4.10' of git://people.freedesktop.org/~agd5f/linux: (54 commits) drm/amdgpu: drop is_display_hung from display funcs drm/amdgpu/uvd: reduce IB parsing overhead on UVD5+ (v2) drm/amdgpu/uvd: consolidate code for fetching addr from ctx drm/amdgpu: Disable DPM in virtualization drm/amdgpu: use AMDGPU_GEM_CREATE_VRAM_CLEARED for VM PD/PTs (v2) drm/amdgpu: improve AMDGPU_GEM_CREATE_VRAM_CLEARED handling (v2) drm/amdgpu: fix error handling in amdgpu_bo_create_restricted drm/amdgpu: fix amdgpu_fill_buffer (v2) drm/amdgpu: remove amdgpu_irq_get_delayed amdgpu: Wrap dev_err() calls on vm faults with printk_ratelimit() amdgpu: Use dev_err() over vanilla printk() in vm_decode_fault() drm/amd/amdgpu: port of DCE v6 to new headers (v3) drm/amdgpu: cleanup unused iterator members for sdma v2.4 drm/amdgpu: cleanup unused iterator members for sdma v3 drm/amdgpu:impl vgt_flush for VI(V5) drm/amdgpu: enable uvd mgcg for Fiji. drm/amdgpu: refine cz uvd clock gate logic. drm/amdgpu: change log level to KERN_INFO in ci_dpm.c drm/amdgpu: always un-gate UVD REGS path. drm/amdgpu/sdma: fix typo in packet setup ...
-
git://git.pengutronix.de/lst/linuxDave Airlie authored
- fix dma-buf export path to return correct SG table - trivially implement direct dma-buf mapping - allow DRAW_INSTANCED commands in validator - make the driver work on i.MX6SX, yielding a working 2D/3D stack together with Mareks MXS DRM driver * 'drm-etnaviv-next' of git://git.pengutronix.de/lst/linux: MAINTAINERS: add etnaviv mailinglist drm/etnaviv: move linear window on MC1.0 parts if necessary drm/etnaviv: don't invoke OOM killer from dump code drm/etnaviv: fix gem_prime_get_sg_table to return new SG table drm/etnaviv: Allow DRAW_INSTANCED commands drm/etnaviv: implement dma-buf mmap
-
- 05 Dec, 2016 9 commits
-
-
git://github.com/skeggsb/linuxDave Airlie authored
- BIT_PERF_PTRS uses 32-bit pointers to its subtables, we were parsing them as 16-bit, causing various issues on newer boards. - Support for MXM on GM20x and up. - More display-related fixes. * 'linux-4.10' of git://github.com/skeggsb/linux: drm/nouveau/mxm: warn more loudly on unsupported DCB version drm/nouveau/mxm: handle DCB 4.1 modification drm/nouveau/bios/mxm: handle digital connector table 1.1 drm/nouveau: Queue hpd_work on (runtime) resume drm/nouveau: Rename acpi_work to hpd_work drm/nouveau/kms/nv50: Fix atomic pageflip events. drm/nouveau/fb/ram/gp100-: fix memory detection where FBP_NUM != FBPA_NUM drm/nouveau/bios/volt: pointers are 32-bit drm/nouveau/bios/vmap: pointers are 32-bit drm/nouveau/bios/timing: pointers are 32-bit drm/nouveau/bios/therm: pointers are 32-bit drm/nouveau/bios/perf: pointers are 32-bit drm/nouveau/bios/iccsense: pointers are 32-bit drm/nouveau/bios/fan: pointers are 32-bit drm/nouveau/bios/cstep: pointers are 32-bit drm/nouveau/bios/boost: pointers are 32-bit
-
Ben Skeggs authored
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Allows MXM DCB modification to be handled on GM20x and newer boards. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
I suspect the version bump is just to signify that the table now specifies pad macro/links instead of SOR/sublinks. For our usage of the table, just recognising the new version is enough. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Javier Martinez Canillas authored
Commit aeefb368 ("drm/exynos: gsc: add device tree support and remove usage of static mappings") made the DRM_EXYNOS_GSC Kconfig symbol to only be selectable if the exynos-gsc V4L2 driver isn't enabled, since both use the same HW IP block. But added the dependency as depends on !VIDEO_SAMSUNG_EXYNOS_GSC which is not correct since Kconfig expressions are not boolean but tristate. So it will only evaluate to 'n' if VIDEO_SAMSUNG_EXYNOS_GSC=y but will evaluate to 'm' if VIDEO_SAMSUNG_EXYNOS_GSC=m. This means that both the V4L2 and DRM drivers can be enabled if the former is enabled as a module, which isn't what we want since otherwise 2 drivers could attempt to use the hardware at the same time. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
-
Colin Ian King authored
Trivial fixes to spelling mistakes "precalser" to "prescaler" in dev_err messages Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
-
Shuah Khan authored
Fix exynos_drm_gem_create() error messages to include flags and size when flags and size are invalid. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
-
Andrzej Hajda authored
Use core helpers to generate infoframes and generate vendor frame if necessary. Changelog: - changed 'ret >= 0' checks to '!ret' Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
-
Dave Airlie authored
Linux 4.9-rc8 Daniel requested this so we could apply some follow on fixes cleanly to -next.
-
- 04 Dec, 2016 2 commits
-
-
Linus Torvalds authored
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "A pretty small pull request: a couple of AMD powerxpress regression fixes and a power management fix, a couple of i915 fixes and one hdlcd fix, along with one core don't oops because of incorrect API usage fix" * tag 'drm-fixes-for-v4.9-rc8' of git://people.freedesktop.org/~airlied/linux: drm/i915: drop the struct_mutex when wedged or trying to reset drm/i915: Don't touch NULL sg on i915_gem_object_get_pages_gtt() error drm: Don't call drm_for_each_crtc with a non-KMS driver drm/radeon: fix check for port PM availability drm/amdgpu: fix check for port PM availability drm/amd/powerplay: initialize the soft_regs offset in struct smu7_hwmgr drm: hdlcd: Fix cleanup order
-
- 03 Dec, 2016 4 commits
-
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2016-12-01' of git://anongit.freedesktop.org/git/drm-intel into drm-fixes 2 intel fixes. * tag 'drm-intel-fixes-2016-12-01' of git://anongit.freedesktop.org/git/drm-intel: drm/i915: drop the struct_mutex when wedged or trying to reset drm/i915: Don't touch NULL sg on i915_gem_object_get_pages_gtt() error
-
Linus Torvalds authored
Merge more fixes from Andrew Morton: "2 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm, vmscan: add cond_resched() into shrink_node_memcg() mm: workingset: fix NULL ptr in count_shadow_nodes
-
Michal Hocko authored
Boris Zhmurov has reported RCU stalls during the kswapd reclaim: INFO: rcu_sched detected stalls on CPUs/tasks: 23-...: (22 ticks this GP) idle=92f/140000000000000/0 softirq=2638404/2638404 fqs=23 (detected by 4, t=6389 jiffies, g=786259, c=786258, q=42115) Task dump for CPU 23: kswapd1 R running task 0 148 2 0x00000008 Call Trace: shrink_node+0xd2/0x2f0 kswapd+0x2cb/0x6a0 mem_cgroup_shrink_node+0x160/0x160 kthread+0xbd/0xe0 __switch_to+0x1fa/0x5c0 ret_from_fork+0x1f/0x40 kthread_create_on_node+0x180/0x180 a closer code inspection has shown that we might indeed miss all the scheduling points in the reclaim path if no pages can be isolated from the LRU list. This is a pathological case but other reports from Donald Buczek have shown that we might indeed hit such a path: clusterd-989 [009] .... 118023.654491: mm_vmscan_direct_reclaim_end: nr_reclaimed=193 kswapd1-86 [001] dN.. 118023.987475: mm_vmscan_lru_isolate: isolate_mode=0 classzone=0 order=0 nr_requested=32 nr_scanned=4239830 nr_taken=0 file=1 kswapd1-86 [001] dN.. 118024.320968: mm_vmscan_lru_isolate: isolate_mode=0 classzone=0 order=0 nr_requested=32 nr_scanned=4239844 nr_taken=0 file=1 kswapd1-86 [001] dN.. 118024.654375: mm_vmscan_lru_isolate: isolate_mode=0 classzone=0 order=0 nr_requested=32 nr_scanned=4239858 nr_taken=0 file=1 kswapd1-86 [001] dN.. 118024.987036: mm_vmscan_lru_isolate: isolate_mode=0 classzone=0 order=0 nr_requested=32 nr_scanned=4239872 nr_taken=0 file=1 kswapd1-86 [001] dN.. 118025.319651: mm_vmscan_lru_isolate: isolate_mode=0 classzone=0 order=0 nr_requested=32 nr_scanned=4239886 nr_taken=0 file=1 kswapd1-86 [001] dN.. 118025.652248: mm_vmscan_lru_isolate: isolate_mode=0 classzone=0 order=0 nr_requested=32 nr_scanned=4239900 nr_taken=0 file=1 kswapd1-86 [001] dN.. 118025.984870: mm_vmscan_lru_isolate: isolate_mode=0 classzone=0 order=0 nr_requested=32 nr_scanned=4239914 nr_taken=0 file=1 [...] kswapd1-86 [001] dN.. 118084.274403: mm_vmscan_lru_isolate: isolate_mode=0 classzone=0 order=0 nr_requested=32 nr_scanned=4241133 nr_taken=0 file=1 this is minute long snapshot which didn't take a single page from the LRU. It is not entirely clear why only 1303 pages have been scanned during that time (maybe there was a heavy IRQ activity interfering). In any case it looks like we can really hit long periods without scheduling on non preemptive kernels so an explicit cond_resched() in shrink_node_memcg which is independent on the reclaim operation is due. Link: http://lkml.kernel.org/r/20161202095841.16648-1-mhocko@kernel.orgSigned-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Boris Zhmurov <bb@kernelpanic.ru> Tested-by: Boris Zhmurov <bb@kernelpanic.ru> Reported-by: Donald Buczek <buczek@molgen.mpg.de> Reported-by: "Christopher S. Aker" <caker@theshore.net> Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Michal Hocko authored
Commit 0a6b76dd ("mm: workingset: make shadow node shrinker memcg aware") has made the workingset shadow nodes shrinker memcg aware. The implementation is not correct though because memcg_kmem_enabled() might become true while we are doing a global reclaim when the sc->memcg might be NULL which is exactly what Marek has seen: BUG: unable to handle kernel NULL pointer dereference at 0000000000000400 IP: [<ffffffff8122d520>] mem_cgroup_node_nr_lru_pages+0x20/0x40 PGD 0 Oops: 0000 [#1] SMP CPU: 0 PID: 60 Comm: kswapd0 Tainted: G O 4.8.10-12.pvops.qubes.x86_64 #1 task: ffff880011863b00 task.stack: ffff880011868000 RIP: mem_cgroup_node_nr_lru_pages+0x20/0x40 RSP: e02b:ffff88001186bc70 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff88001186bd20 RCX: 0000000000000002 RDX: 000000000000000c RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88001186bc70 R08: 28f5c28f5c28f5c3 R09: 0000000000000000 R10: 0000000000006c34 R11: 0000000000000333 R12: 00000000000001f6 R13: ffffffff81c6f6a0 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff880013c00000(0000) knlGS:ffff880013d00000 CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000400 CR3: 00000000122f2000 CR4: 0000000000042660 Call Trace: count_shadow_nodes+0x9a/0xa0 shrink_slab.part.42+0x119/0x3e0 shrink_node+0x22c/0x320 kswapd+0x32c/0x700 kthread+0xd8/0xf0 ret_from_fork+0x1f/0x40 Code: 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 3b 35 dd eb b1 00 55 48 89 e5 73 2c 89 d2 31 c9 31 c0 4c 63 ce 48 0f a3 ca 73 13 <4a> 8b b4 cf 00 04 00 00 41 89 c8 4a 03 84 c6 80 00 00 00 83 c1 RIP mem_cgroup_node_nr_lru_pages+0x20/0x40 RSP <ffff88001186bc70> CR2: 0000000000000400 ---[ end trace 100494b9edbdfc4d ]--- This patch fixes the issue by checking sc->memcg rather than memcg_kmem_enabled() which is sufficient because shrink_slab makes sure that only memcg aware shrinkers will get non-NULL memcgs and only if memcg_kmem_enabled is true. Fixes: 0a6b76dd ("mm: workingset: make shadow node shrinker memcg aware") Link: http://lkml.kernel.org/r/20161201132156.21450-1-mhocko@kernel.orgSigned-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Marek Marczykowski-Górecki <marmarek@mimuw.edu.pl> Tested-by: Marek Marczykowski-Górecki <marmarek@mimuw.edu.pl> Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Balbir Singh <bsingharora@gmail.com> Cc: <stable@vger.kernel.org> [4.6+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 02 Dec, 2016 10 commits
-
-
Nicolas Pitre authored
When building a specific target such as bzImage, modules aren't normally built. However if CONFIG_TRIM_UNUSED_KSYMS is enabled, no built modules means none of the exported symbols are used and therefore they will all be trimmed away from the final kernel. A subsequent "make modules" will fail because modpost cannot find the needed symbols for those modules in the kernel binary. Let's make sure modules are also built whenever CONFIG_TRIM_UNUSED_KSYMS is enabled and that the kernel binary is properly rebuilt accordingly. Signed-off-by: Nicolas Pitre <nico@linaro.org> Tested-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Arnd Bergmann: "This should be the last set of bugfixes for arm-soc in v4.9. None of these are critical regressions, but it would be nice to still get them merged. - On the Juno platform, the idle latency was described wrong, leading to suboptimal cpuidle tuning. - Also on the same platform, PCI I/O space was set up incorrectly and could not work. - On the sti platform, a syntactically incorrect DT entry caused warnings. - The newly added 'gr8' platform has somewhat confusing file names, which we rename for consistency" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: dts: juno: fix cluster sleep state entry latency on all SoC versions arm64: dts: juno: Correct PCI IO window ARM: dts: STiH407-family: fix i2c nodes ARM: gr8: Rename the DTSI and relevant DTS
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Lots more phydev and probe error path leaks in various drivers by Johan Hovold. 2) Fix race in packet_set_ring(), from Philip Pettersson. 3) Use after free in dccp_invalid_packet(), from Eric Dumazet. 4) Signnedness overflow in SO_{SND,RCV}BUFFORCE, also from Eric Dumazet. 5) When tunneling between ipv4 and ipv6 we can be left with the wrong skb->protocol value as we enter the IPSEC engine and this causes all kinds of problems. Set it before the output path does any dst_output() calls, from Eli Cooper. 6) bcmgenet uses wrong device struct pointer in DMA API calls, fix from Florian Fainelli. 7) Various netfilter nat bug fixes from FLorian Westphal. 8) Fix memory leak in ipvlan_link_new(), from Gao Feng. 9) Locking fixes, particularly wrt. socket lookups, in l2tp from Guillaume Nault. 10) Avoid invoking rhash teardowns in atomic context by moving netlink cb->done() dump completion from a worker thread. Fix from Herbert Xu. 11) Buffer refcount problems in tun and macvtap on errors, from Jason Wang. 12) We don't set Kconfig symbol DEFAULT_TCP_CONG properly when the user selects BBR. Fix from Julian Wollrath. 13) Fix deadlock in transmit path on altera TSE driver, from Lino Sanfilippo. 14) Fix unbalanced reference counting in dsa_switch_tree, from Nikita Yushchenko. 15) tc_tunnel_key needs to be properly exported to userspace via uapi, fix from Roi Dayan. 16) rds_tcp_init_net() doesn't unregister notifier in error path, fix from Sowmini Varadhan. 17) Stale packet header pointer access after pskb_expand_head() in genenve driver, fix from Sabrina Dubroca. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (103 commits) net: avoid signed overflows for SO_{SND|RCV}BUFFORCE geneve: avoid use-after-free of skb->data tipc: check minimum bearer MTU net: renesas: ravb: unintialized return value sh_eth: remove unchecked interrupts for RZ/A1 net: bcmgenet: Utilize correct struct device for all DMA operations NET: usb: qmi_wwan: add support for Telit LE922A PID 0x1040 cdc_ether: Fix handling connection notification ip6_offload: check segs for NULL in ipv6_gso_segment. RDS: TCP: unregister_netdevice_notifier() in error path of rds_tcp_init_net Revert: "ip6_tunnel: Update skb->protocol to ETH_P_IPV6 in ip6_tnl_xmit()" ipv6: Set skb->protocol properly for local output ipv4: Set skb->protocol properly for local output packet: fix race condition in packet_set_ring net: ethernet: altera: TSE: do not use tx queue lock in tx completion handler net: ethernet: altera: TSE: Remove unneeded dma sync for tx buffers net: ethernet: stmmac: fix of-node and fixed-link-phydev leaks net: ethernet: stmmac: platform: fix outdated function header net: ethernet: stmmac: dwmac-meson8b: fix probe error path net: ethernet: stmmac: dwmac-generic: fix probe error path ...
-
Eric Dumazet authored
CAP_NET_ADMIN users should not be allowed to set negative sk_sndbuf or sk_rcvbuf values, as it can lead to various memory corruptions, crashes, OOM... Note that before commit 82981930 ("net: cleanups in sock_setsockopt()"), the bug was even more serious, since SO_SNDBUF and SO_RCVBUF were vulnerable. This needs to be backported to all known linux kernels. Again, many thanks to syzkaller team for discovering this gem. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sabrina Dubroca authored
geneve{,6}_build_skb can end up doing a pskb_expand_head(), which makes the ip_hdr(skb) reference we stashed earlier stale. Since it's only needed as an argument to ip_tunnel_ecn_encap(), move this directly in the function call. Fixes: 08399efc ("geneve: ensure ECN info is handled properly in all tx/rx paths") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michal Kubeček authored
Qian Zhang (张谦) reported a potential socket buffer overflow in tipc_msg_build() which is also known as CVE-2016-8632: due to insufficient checks, a buffer overflow can occur if MTU is too short for even tipc headers. As anyone can set device MTU in a user/net namespace, this issue can be abused by a regular user. As agreed in the discussion on Ben Hutchings' original patch, we should check the MTU at the moment a bearer is attached rather than for each processed packet. We also need to repeat the check when bearer MTU is adjusted to new device MTU. UDP case also needs a check to avoid overflow when calculating bearer MTU. Fixes: b97bf3fd ("[TIPC] Initial merge") Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reported-by: Qian Zhang (张谦) <zhangqian-c@360.cn> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'linux-can-fixes-for-4.9-20161201' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2016-12-02 this is a pull request for net/master. There are two patches by Stephane Grosjean, who adds support for the new PCAN-USB X6 USB interface to the pcan_usb driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
We want to set the other "err" variable here so that we can return it later. My version of GCC misses this issue but I caught it with a static checker. Fixes: 9f70eb33 ("net: ethernet: renesas: ravb: fix fixed-link phydev leaks") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Chris Brandt authored
When streaming a lot of data and the RZ/A1 can't keep up, some status bits will get set that are not being checked or cleared which cause the following messages and the Ethernet driver to stop working. This patch fixes that issue. irq 21: nobody cared (try booting with the "irqpoll" option) handlers: [<c036b71c>] sh_eth_interrupt Disabling IRQ #21 Fixes: db893473 ("sh_eth: Add support for r7s72100") Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
__bcmgenet_tx_reclaim() and bcmgenet_free_rx_buffers() are not using the same struct device during unmap that was used for the map operation, which makes DMA-API debugging warn about it. Fix this by always using &priv->pdev->dev throughout the driver, using an identical device reference for all map/unmap calls. Fixes: 1c1008c7 ("net: bcmgenet: add main driver file") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-