- 16 Oct, 2015 11 commits
-
-
Marcelo Tosatti authored
As reported at https://bugs.launchpad.net/qemu/+bug/1494350, it is possible to have vcpu->arch.st.last_steal initialized from a thread other than vcpu thread, say the iothread, via KVM_SET_MSRS. Which can cause an overflow later (when subtracting from vcpu threads sched_info.run_delay). To avoid that, move steal time accumulation to vcpu entry time, before copying steal time data to guest. Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com> Reviewed-by:
David Matlack <dmatlack@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Takuya Yoshikawa authored
Calling kvm_vcpu_gfn_to_memslot() twice in mapping_level() should be avoided since getting a slot by binary search may not be negligible, especially for virtual machines with many memory slots. Signed-off-by:
Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by:
-
Takuya Yoshikawa authored
Now that it has only one caller, and its name is not so helpful for readers, remove it. The new memslot_valid_for_gpte() function makes it possible to share the common code between gfn_to_memslot_dirty_bitmap() and mapping_level(). Signed-off-by:
-
Takuya Yoshikawa authored
This is necessary to eliminate an extra memory slot search later. Signed-off-by:
-
Takuya Yoshikawa authored
As a bonus, an extra memory slot search can be eliminated when is_self_change_mapping is true. Signed-off-by:
-
Takuya Yoshikawa authored
This will be passed to a function later. Signed-off-by:
-
Joerg Roedel authored
Currently we always write the next_rip of the shadow vmcb to the guests vmcb when we emulate a vmexit. This could confuse the guest when its cpuid indicated no support for the next_rip feature. Fix this by only propagating next_rip if the guest actually supports it. Cc: Bandan Das <bsd@redhat.com> Cc: Dirk Mueller <dmueller@suse.com> Tested-By:
Dirk Mueller <dmueller@suse.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Paolo Bonzini authored
The loop is computing one of two constants, it can be simpler to write everything inline. Signed-off-by: -
Wanpeng Li authored
Expose VPID capability to L1. For nested guests, we don't do anything specific for single context invalidation. Hence, only advertise support for global context invalidation. The major benefit of nested VPID comes from having separate vpids when switching between L1 and L2, and also when L2's vCPUs not sched in/out on L1. Reviewed-by:
Wincy Van <fanwenyi0529@gmail.com> Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:
-
Wanpeng Li authored
VPID is used to tag address space and avoid a TLB flush. Currently L0 use the same VPID to run L1 and all its guests. KVM flushes VPID when switching between L1 and L2. This patch advertises VPID to the L1 hypervisor, then address space of L1 and L2 can be separately treated and avoid TLB flush when swithing between L1 and L2. For each nested vmentry, if vpid12 is changed, reuse shadow vpid w/ an invvpid. Performance: run lmbench on L2 w/ 3.5 kernel. Context switching - times in microseconds - smaller is better ------------------------------------------------------------------------- Host OS 2p/0K 2p/16K 2p/64K 8p/16K 8p/64K 16p/16K 16p/64K ctxsw ctxsw ctxsw ctxsw ctxsw ctxsw ctxsw --------- ------------- ------ ------ ------ ------ ------ ------- ------- kernel Linux 3.5.0-1 1.2200 1.3700 1.4500 4.7800 2.3300 5.60000 2.88000 nested VPID kernel Linux 3.5.0-1 1.2600 1.4300 1.5600 12.7 12.9 3.49000 7.46000 vanilla Reviewed-by:Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by:
-
Wanpeng Li authored
Add the INVVPID instruction emulation. Reviewed-by:
-
- 14 Oct, 2015 9 commits
-
-
Wanpeng Li authored
Introduce __vmx_flush_tlb() to handle specific vpid. Signed-off-by:
-
Wanpeng Li authored
Adjust allocate/free_vid so that they can be reused for the nested vpid. Signed-off-by:
-
Kosuke Tatsukawa authored
async_pf_execute() seems to be missing a memory barrier which might cause the waker to not notice the waiter and miss sending a wake_up as in the following figure. async_pf_execute kvm_vcpu_block ------------------------------------------------------------------------ spin_lock(&vcpu->async_pf.lock); if (waitqueue_active(&vcpu->wq)) /* The CPU might reorder the test for the waitqueue up here, before prior writes complete */ prepare_to_wait(&vcpu->wq, &wait, TASK_INTERRUPTIBLE); /*if (kvm_vcpu_check_block(vcpu) < 0) */ /*if (kvm_arch_vcpu_runnable(vcpu)) { */ ... return (vcpu->arch.mp_state == KVM_MP_STATE_RUNNABLE && !vcpu->arch.apf.halted) || !list_empty_careful(&vcpu->async_pf.done) ... return 0; list_add_tail(&apf->link, &vcpu->async_pf.done); spin_unlock(&vcpu->async_pf.lock); waited = true; schedule(); ------------------------------------------------------------------------ The attached patch adds the missing memory barrier. I found this issue when I was looking through the linux source code for places calling waitqueue_active() before wake_up*(), but without preceding memory barriers, after sending a patch to fix a similar issue in drivers/tty/n_tty.c (Details about the original issue can be found here: https://lkml.org/lkml/2015/9/28/849). Signed-off-by:Kosuke Tatsukawa <tatsu@ab.jp.nec.com> Signed-off-by:
-
Radim Krčmář authored
On real hardware, edge-triggered interrupts don't set a bit in TMR, which means that IOAPIC isn't notified on EOI. Do the same here. Staying in guest/kernel mode after edge EOI is what we want for most devices. If some bugs could be nicely worked around with edge EOI notifications, we should invest in a better interface. Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Radim Krčmář authored
KVM uses eoi_exit_bitmap to track vectors that need an action on EOI. The problem is that IOAPIC can be reconfigured while an interrupt with old configuration is pending and eoi_exit_bitmap only remembers the newest configuration; thus EOI from the pending interrupt is not recognized. (Reconfiguration is not a problem for level interrupts, because IOAPIC sends interrupt with the new configuration.) For an edge interrupt with ACK notifiers, like i8254 timer; things can happen in this order 1) IOAPIC inject a vector from i8254 2) guest reconfigures that vector's VCPU and therefore eoi_exit_bitmap on original VCPU gets cleared 3) guest's handler for the vector does EOI 4) KVM's EOI handler doesn't pass that vector to IOAPIC because it is not in that VCPU's eoi_exit_bitmap 5) i8254 stops working A simple solution is to set the IOAPIC vector in eoi_exit_bitmap if the vector is in PIR/IRR/ISR. This creates an unwanted situation if the vector is reused by a non-IOAPIC source, but I think it is so rare that we don't want to make the solution more sophisticated. The simple solution also doesn't work if we are reconfiguring the vector. (Shouldn't happen in the wild and I'd rather fix users of ACK notifiers instead of working around that.) The are no races because ioapic injection and reconfig are locked. Fixes: b053b2ae ("KVM: x86: Add EOI exit bitmap inference") [Before b053b2ae, this bug happened only with APICv.] Fixes: c7c9c56c ("x86, apicv: add virtual interrupt delivery support") Cc: <stable@vger.kernel.org> Signed-off-by: -
Radim Krčmář authored
After moving PIR to IRR, the interrupt needs to be delivered manually. Reported-by:
-
Paolo Bonzini authored
Merge more important SMM fixes.
-
Paolo Bonzini authored
In order to get into 64-bit protected mode, you need to enable paging while EFER.LMA=1. For this to work, CS.L must be 0. Currently, we load the segments before CR0 and CR4, which means that if RSM returns into 64-bit protected mode CS.L is already 1 and everything breaks. Luckily, CS.L=0 is always the case when executing RSM, because it is forbidden to execute RSM from 64-bit protected mode. Hence it is enough to load CR0 and CR4 first, and only then the segments. Fixes: 660a5d51 Cc: stable@vger.kernel.org Signed-off-by:
-
Paolo Bonzini authored
Unfortunately I only noticed this after pushing. Fixes: f0d648bd Cc: stable@vger.kernel.org Signed-off-by:
-
- 13 Oct, 2015 16 commits
-
-
Paolo Bonzini authored
This merge brings in a couple important SMM fixes, which makes it easier to test latest KVM with unrestricted_guest=0 and to test the in-progress work on SMM support in the firmware. Conflicts: arch/x86/kvm/x86.c
-
Paolo Bonzini authored
An SMI to a halted VCPU must wake it up, hence a VCPU with a pending SMI must be considered runnable. Fixes: 64d60670 Cc: stable@vger.kernel.org Signed-off-by:
-
Paolo Bonzini authored
Split the huge conditional in two functions. Fixes: 64d60670 Cc: stable@vger.kernel.org Reviewed-by:
-
Paolo Bonzini authored
Otherwise, two copies (one of them never populated and thus bogus) are allocated for the regular and SMM address spaces. This breaks SMM with EPT but without unrestricted guest support, because the SMM copy of the identity page map is all zeros. By moving the allocation to the caller we also remove the last vestiges of kernel-allocated memory regions (not accessible anymore in userspace since commit b74a07be, "KVM: Remove kernel-allocated memory regions", 2010-06-21); that is a nice bonus. Reported-by:
Alexandre DERUMIER <aderumier@odiso.com> Cc: stable@vger.kernel.org Fixes: 9da0e4d5Reviewed-by:
-
Paolo Bonzini authored
The next patch will make x86_set_memory_region fill the userspace_addr. Since the struct is not used untouched anymore, it makes sense to build it in x86_set_memory_region directly; it also simplifies the callers. Reported-by:
-
Paolo Bonzini authored
Merge tag 'kvm-s390-next-20151013' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: Fixes for 4.4 A bunch of fixes and optimizations for interrupt and time handling. No fix is important enough to qualify for 4.3 or stable.
-
David Hildenbrand authored
Let's factor this out and always use get_tod_clock_fast() when reading the guest TOD. STORE CLOCK FAST does not do serialization and, therefore, might result in some fuzziness between different processors in a way that subsequent calls on different CPUs might have time stamps that are earlier. This semantics is fine though for all KVM use cases. To make it obvious that the new function has STORE CLOCK FAST semantics we name it kvm_s390_get_tod_clock_fast. With this patch, we only have a handful of places were we have to care about STP sync (using preempt_disable() logic). Reviewed-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by:
-
David Hildenbrand authored
Let's move that whole logic into one function. We now always use unsigned values when calculating the epoch (to avoid over/underflow defined). Also, we always have to get all VCPUs out of SIE before doing the update to avoid running differing VCPUs with different TODs. Acked-by:
-
David Hildenbrand authored
Nobody except early.c makes use of store_tod_clock() to handle the cc. So if we would get a cc != 0, we would be in more trouble. Let's replace all users with get_tod_clock(). Returning a cc on an ioctl sounded strange either way. We can now also easily move the get_tod_clock() call into the preempt_disable() section. This is in fact necessary to make the STP sync work as expected. Otherwise the host TOD could change and we would end up with a wrong epoch calculation. Reviewed-by:
-
David Hildenbrand authored
PER events can always co-exist with other program interrupts. For now, we always overwrite all program interrupt parameters when injecting any type of program interrupt. Let's handle that correctly by only overwriting the relevant portion of the program interrupt parameters. Therefore we can now inject PER events and ordinary program interrupts concurrently, resulting in no loss of program interrupts. This will especially by helpful when manually detecting PER events later - as both types might be triggered during one SIE exit. Reviewed-by:
-
David Hildenbrand authored
The main reason to keep program injection in kernel separated until now was that we were able to do some checking, if really only the owning thread injects program interrupts (via waitqueue_active(li->wq)). This BUG_ON was never triggered and the chances of really hitting it, if another thread injected a program irq to another vcpu, were very small. Let's drop this check and turn kvm_s390_inject_program_int() and kvm_s390_inject_prog_irq() into simple inline functions that makes use of kvm_s390_inject_vcpu(). __must_check can be dropped as they are implicitely given by kvm_s390_inject_vcpu(), to avoid ugly long function prototypes. Reviewed-by:
Jens Freimann <jfrei@linux.vnet.ibm.com> Acked-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by:
-
David Hildenbrand authored
Let's get rid of the local variable and exit directly if we found any pending interrupt. This is not only faster, but also better readable. Reviewed-by:
-
David Hildenbrand authored
We can remove that double check. Reviewed-by:
-
David Hildenbrand authored
No need to separate pending and floating irqs when setting interception requests. Let's do it for all equally. Reviewed-by:
-
David Hildenbrand authored
We don't care about program event recording irqs (synchronous program irqs) but asynchronous irqs when checking for disabled wait. Machine checks were missing. Let's directly switch to the functions we have for that purpose instead of testing once again for magic bits. Reviewed-by:
-
Christian Borntraeger authored
the float int structure is no longer used in __inject_vm. Acked-by:
-
- 01 Oct, 2015 4 commits
-
-
Feng Wu authored
Enable VT-d Posted-Interrtups and add a command line parameter for it. Signed-off-by:
Feng Wu <feng.wu@intel.com> Reviewed-by:
Alex Williamson <alex.williamson@redhat.com> Acked-by:
Joerg Roedel <joro@8bytes.org> Signed-off-by:
-
Feng Wu authored
This patch updates the Posted-Interrupts Descriptor when vCPU is blocked. pre-block: - Add the vCPU to the blocked per-CPU list - Set 'NV' to POSTED_INTR_WAKEUP_VECTOR post-block: - Remove the vCPU from the per-CPU list Signed-off-by:
-
Feng Wu authored
This patch updates the Posted-Interrupts Descriptor when vCPU is preempted. sched out: - Set 'SN' to suppress furture non-urgent interrupts posted for the vCPU. sched in: - Clear 'SN' - Change NDST if vCPU is scheduled to a different CPU - Set 'NV' to POSTED_INTR_VECTOR Signed-off-by:
-
Feng Wu authored
Select IRQ_BYPASS_MANAGER for x86 when CONFIG_KVM is set Signed-off-by:
-
