- 08 Mar, 2010 40 commits
-
-
Eric W. Biederman authored
Because of rename ordering problems we occassionally give false warnings about invalid sysfs operations. So using sysfs_rename create a sysfs_rename_link function that doesn't need strange workarounds. Cc: Benjamin Thery <benjamin.thery@bull.net> Cc: Daniel Lezcano <dlezcano@fr.ibm.com> Acked-by:
Serge Hallyn <serue@us.ibm.com> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Eric W. Biederman authored
Placing the 16bit s_mode between a pointer and a long doesn't pack well especailly on 64bit where we wast 48 bits. So move s_mode and declare it as a unsigned short. This is the sysfs backing store after all we don't need fields extra large just in case someday we want userspace to be able to use a larger value. Acked-by:
-
Eric W. Biederman authored
The vfs depends upon filesystem methods to update the vfs inode. Sysfs adds to the normal number of places where the vfs inode is updated by also updatng the vfs inode in sysfs_refresh_inode. Typically the inode mutex is used to serialize updates to the vfs inode, but grabbing the inode mutex in sysfs_permission and sysfs_getattr causes deadlocks, because sometimes the vfs calls those operations with the inode mutex held. Therefore sysfs can not use the inode mutex to serial updates to the vfs inode. The sysfs_mutex is acquired in all of the routines where sysfs updates the vfs inode, and with a small change we can consistently protext sysfs vfs inode updates with the sysfs_mutex. To protect the sysfs vfs inode updates with the sysfs_mutex simply requires extending the scope of sysfs_mutex in sysfs_setattr over inode_setattr, and over inode_change_ok (so we have an unchanging inode when we perform the check). Acked-by:
-
Johannes Berg authored
This is required for lockdep. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Eric W. Biederman authored
A little more whack-a-mole annotating the dynamic sysfs attributes. I had everything built into my earlier test kernel, and so I missed these. Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
I have added a new requirement to the external sysfs interface that dynamically allocated sysfs attributes must call sysfs_attr_init if lockdep is enabled. For the time being callying sysfs_attr_init is only mandatory if lockdep is enabled, so we can live with a few unconverted instances until we find them all. As this is part of the public interface of sysfs it is a good idea to document these pseudo functions so someone inspeciting the code can find out what has happened. Signed-off-by:
-
Eric W. Biederman authored
These are the non-static sysfs attributes that exist on my test machine. Fix them to use sysfs_attr_init or sysfs_bin_attr_init as appropriate. It simply requires making a sysfs attribute present to see this. So this is a little bit tedious but otherwise not too bad. Signed-off-by:
WANG Cong <xiyou.wangcong@gmail.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by:
-
Eric W. Biederman authored
Acknowledge that the logical sysfs rwsem has one instance per sysfs attribute with different locking depencencies for different attributes. There is a sysfs idiom where writing to one sysfs file causes the addition or removal of other sysfs files. Lumping all of the sysfs attributes together in one lock class causes lockdep to generate lots of false positives. This introduces the requirement that non-static sysfs attributes need to be initialized with sysfs_attr_init or sysfs_bin_attr_init. Strictly speaking this requirement only exists when lockdep is enabled, and when lockdep is enabled we get a bit fat warning if this requirement is not met. Signed-off-by:
-
Eric W. Biederman authored
If we exclude directories and symlinks from the set of sysfs dirents where we need active references we are left with sysfs attributes (binary or not). - Tweak sysfs_deactivate to only do something on attributes - Move lockdep initialization into sysfs_file_add_mode to limit it to just attributes. Signed-off-by:
-
Eric W. Biederman authored
It turns out that holding an active reference on a directory is pointless. The purpose of the active references are to allows us to block when removing sysfs entries that have custom methods so we don't remove modules while running modular code and to keep those custom methods from accessing data structures after the files have been removed. Further sysfs_remove_dir remove all elements in the directory before removing the directory itself, so there is no chance we will remove a directory with active children. Signed-off-by:
-
Ben Hutchings authored
The function name must be followed by a space, hypen, space, and a short description. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Hans J. Koch authored
Ben Nizette, the author of this driver, told me in a private mail that this project has been cancelled. He suggested to remove the driver for now, and will come back with a new version should the hardware really exist. This patch completely removes the driver. Signed-off-by:
Hans J. Koch <hjk@linutronix.de> Acked-by:
Ben Nizette <bn@niasdigital.com> Signed-off-by:
-
John Ogness authored
Two trivial fixes for the Userspace IO Kconfig file: 1) uio_sercos3 is a PCI driver, so let it depend on PCI. 2) "default n" under UIO_PCI_GENERIC is luxury since it is already the default. Acked-by:
John Ogness <john.ogness@linutronix.de> Signed-off-by:
-
Hans J. Koch authored
This patch adds a Userspace IO driver for netX-based fieldbus cards by Hilscher (see http://www.hilscher.com). ATM, cifX and comX cards are supported. The userspace part for this driver is provided by Hilscher and should come with the card. The driver is in use for several months now and has been tested by people at Hilscher and Linutronix. Signed-off-by:
-
Uwe Kleine-König authored
A pointer to cfag12864bfb_probe is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by:
Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Avuton Olrich <avuton@gmail.com> Cc: Antonino Daplas <adaplas@gmail.com> Signed-off-by:
-
Uwe Kleine-König authored
A pointer to omap24xxcam_probe is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by:
Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> Acked-by:
Trilok Soni <soni.trilok@gmail.com> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Uwe Kleine-König authored
A pointer to omap_hdq_probe is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by:
Evgeniy Polyakov <zbr@ioremap.net> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by:
-
Uwe Kleine-König authored
A pointer to omap_i2c_probe is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by:
-
Uwe Kleine-König authored
A pointer to hp_wmi_bios_setup is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by:
Matthew Garrett <mjg@redhat.com> Signed-off-by:
-
Uwe Kleine-König authored
A pointer to a probe callback is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Acked-by:
Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by:
James Simmons <jsimmons@infradead.org> Acked-by:
Peter Jones <pjones@redhat.com> Acked-by:
Jaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by:
-
Uwe Kleine-König authored
A pointer to a probe callback is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by:
-
Uwe Kleine-König authored
A pointer to a probe callback is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by:
Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Acked-by:
Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by:
-
Uwe Kleine-König authored
This fixes a warning on several pxa based machines: arch/arm/mach-pxa/ssp.c:475: warning: initialization discards qualifiers from pointer target type Signed-off-by:
Vikram Dhillon <dhillonv10@gmail.com> Acked-by:
Eric Miao <eric.y.miao@gmail.com> Signed-off-by:
-
Emese Revfy authored
Constify struct sysfs_ops. This is part of the ops structure constification effort started by Arjan van de Ven et al. Benefits of this constification: * prevents modification of data that is shared (referenced) by many other structure instances at runtime * detects/prevents accidental (but not intentional) modification attempts on archs that enforce read-only kernel data at runtime * potentially better optimized code as the compiler can assume that the const data cannot be changed * the compiler/linker move const data into .rodata and therefore exclude them from false sharing Signed-off-by:
Emese Revfy <re.emese@gmail.com> Acked-by:
David Teigland <teigland@redhat.com> Acked-by:
Matt Domsch <Matt_Domsch@dell.com> Acked-by:
Maciej Sosnowski <maciej.sosnowski@intel.com> Acked-by:
Pekka Enberg <penberg@cs.helsinki.fi> Acked-by:
Jens Axboe <jens.axboe@oracle.com> Acked-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
Greg Kroah-Hartman authored
These should be sysdev attributes, not class attributes. This patch should resolve the problem. Thanks to Stephen Rothwell for pointing out the problem. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by:
-
Stefan Richter authored
One of the roles which -mm fulfilled some time ago (to offer an integration testing ground) has been taken over by -next. This is still news to Documentation/HOWTO, so mention it there. Also add a word on how patchwork is used to track patches as they make their way into subsystem trees. Remove some arbitrary links to subsystem repositories; they can all be found in the MAINTAINERS database. Acked-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by:
-
Emese Revfy authored
Constify struct kset_uevent_ops. This is part of the ops structure constification effort started by Arjan van de Ven et al. Benefits of this constification: * prevents modification of data that is shared (referenced) by many other structure instances at runtime * detects/prevents accidental (but not intentional) modification attempts on archs that enforce read-only kernel data at runtime * potentially better optimized code as the compiler can assume that the const data cannot be changed * the compiler/linker move const data into .rodata and therefore exclude them from false sharing Signed-off-by:
-
Luis R. Rodriguez authored
base.h is used by base drivers for sharing internal structures. Turns out firmware_class does not depend on it at all so remove it. Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Eric W. Biederman authored
When sysfs_readdir stops short we now cache the next sysfs_dirent to return to user space in filp->private_data. There is no impact on the rest of sysfs by doing this and in the common case it allows us to pick up exactly where we left off with no seeking. Additionally I drop and regrab the sysfs_mutex around filldir to avoid a page fault abritrarily increasing the hold time on the sysfs_mutex. v2: Returned to using INT_MAX as the EOF condition. seekdir is ambiguous unless all directory entries have a unique f_pos value. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=14949Signed-off-by: -
Kay Sievers authored
No longer fall back to "add" and warn, but always require a valid action-string written to the "uevent" file. Signed-off-by:
Kay Sievers <kay.sievers@vrfy.org> Signed-off-by:
-
Kay Sievers authored
No recent mainstream system uses the /sbin/hotplug fork-bomb any more. Disable it by default to reflect how it is used these days. Signed-off-by:
-
Kay Sievers authored
All major distros enable devtmpfs on recent systems, so remove the EXPERIMENTAL flag, and make the description a bit more instructive. Signed-off-by:
-
Kay Sievers authored
Before unlinking the inode, reset the current permissions of possible references like hardlinks, so granted permissions can not be retained across the device lifetime by creating hardlinks, in the unusual case that there is a user-writable directory on the same filesystem. Signed-off-by:
-
Andi Kleen authored
Convert some drivers who export a single string as class attribute to the new class_attr_string functions. This removes redundant code all over. Signed-off-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
Andi Kleen authored
Several drivers just export a static string as class attributes. Use the new extensible attribute support to define a simple CLASS_ATTR_STRING() macro for this. This will allow to remove code from drivers in followon patches. Signed-off-by:
-
Andi Kleen authored
Passing the attribute to the low level IO functions allows all kinds of cleanups, by sharing low level IO code without requiring an own function for every piece of data. Also drivers can extend the attributes with own data fields and use that in the low level function. This makes the class attributes the same as sysdev_class attributes and plain attributes. This will allow further cleanups in drivers. Full tree sweep converting all users. Signed-off-by:
-
Heiko Carstens authored
In linux-next "sysdev: Pass attribute in sysdev_class attributes show/store" forgot to convert one place in s390 code. Here is the missing part. Cc: Andi Kleen <ak@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Andi Kleen authored
This attribute is really a sysdev_class attribute, not a plain class attribute. They are identical in layout currently, but this might not always be the case. Signed-off-by:
-
Andi Kleen authored
Allow to create/remove arrays of sysdev attributes Just wrappers around sysfs_create/move_files Will be used later to clean up some drivers. Signed-off-by:
-
Andi Kleen authored
Convert the node driver to sysdev_class attribute arrays. This greatly cleans up the code and remove a lot of code. Saves ~150 bytes of code on x86-64. Signed-off-by:
-
