- 17 Mar, 2022 3 commits
-
-
Lorenzo Bianconi authored
Allow increasing the MTU over page boundaries on veth devices if the attached xdp program declares to support xdp fragments. Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Toke Høiland-Jørgensen <toke@redhat.com> Acked-by:
John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/d5dc039c3d4123426e7023a488c449181a7bc57f.1646989407.git.lorenzo@kernel.org
-
Lorenzo Bianconi authored
Introduce veth_convert_skb_to_xdp_buff routine in order to convert a non-linear skb into a xdp buffer. If the received skb is cloned or shared, veth_convert_skb_to_xdp_buff will copy it in a new skb composed by order-0 pages for the linear and the fragmented area. Moreover veth_convert_skb_to_xdp_buff guarantees we have enough headroom for xdp. This is a preliminary patch to allow attaching xdp programs with frags support on veth devices. Signed-off-by:
-
Lorenzo Bianconi authored
Even if this is a theoretical issue since it is not possible to perform XDP_REDIRECT on a non-linear xdp_frame, veth driver does not account paged area in ndo_xdp_xmit function pointer. Introduce xdp_get_frame_len utility routine to get the xdp_frame full length and account total frame size running XDP_REDIRECT of a non-linear xdp frame into a veth device. Signed-off-by:
-
- 16 Mar, 2022 7 commits
-
-
Hou Tao authored
When bpf_jit_harden is toggled between 0 and 2, subprog jit may fail due to inconsistent twice read values of bpf_jit_harden during jit. So add a test to ensure the problem is fixed. Signed-off-by:
Hou Tao <houtao1@huawei.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20220309123321.2400262-5-houtao1@huawei.com
-
Hou Tao authored
It is the bpf_jit_harden counterpart to commit 60b58afc ("bpf: fix net.core.bpf_jit_enable race"). bpf_jit_harden will be tested twice for each subprog if there are subprogs in bpf program and constant blinding may increase the length of program, so when running "./test_progs -t subprogs" and toggling bpf_jit_harden between 0 and 2, jit_subprogs may fail because constant blinding increases the length of subprog instructions during extra passs. So cache the value of bpf_jit_blinding_enabled() during program allocation, and use the cached value during constant blinding, subprog JITing and args tracking of tail call. Signed-off-by:
-
Hou Tao authored
Extra pass for subprog jit may fail (e.g. due to bpf_jit_harden race), but bpf_func is not cleared for the subprog and jit_subprogs will succeed. The running of the bpf program may lead to oops because the memory for the jited subprog image has already been freed. So fall back to interpreter mode by clearing bpf_func/jited/jited_len when extra pass fails. Signed-off-by:
-
Alexei Starovoitov authored
Martin KaFai Lau says: ==================== After upgrading to the newer libcap (>= 2.60), the libcap commit aca076443591 ("Make cap_t operations thread safe.") added a "__u8 mutex;" to the "struct _cap_struct". It caused a few byte shift that breaks the assumption made in the "struct libcap" definition in test_verifier.c. This set is to remove the libcap dependency from the bpf selftests. v2: - Define CAP_PERFMON and CAP_BPF when the older <linux/capability.h> does not have them. (Andrii) ==================== Signed-off-by: -
Martin KaFai Lau authored
This patch removes the libcap usage from test_progs. bind_perm.c is the only user. cap_*_effective() helpers added in the earlier patch are directly used instead. No other selftest binary is using libcap, so '-lcap' is also removed from the Makefile. Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
Stanislav Fomichev <sdf@google.com> Acked-by:
-
Martin KaFai Lau authored
This patch removes the libcap usage from test_verifier. The cap_*_effective() helpers added in the earlier patch are used instead. Signed-off-by:
-
Martin KaFai Lau authored
After upgrading to the newer libcap (>= 2.60), the libcap commit aca076443591 ("Make cap_t operations thread safe.") added a "__u8 mutex;" to the "struct _cap_struct". It caused a few byte shift that breaks the assumption made in the "struct libcap" definition in test_verifier.c. The bpf selftest usage only needs to enable and disable the effective caps of the running task. It is easier to directly syscall the capget and capset instead. It can also remove the libcap library dependency. The cap_helpers.{c,h} is added. One __u64 is used for all CAP_* bits instead of two __u32. Signed-off-by:
-
- 15 Mar, 2022 8 commits
-
-
Daniel Xu authored
The top-level (bpftool.8) man page was missing docs for a few subcommands and their respective sub-sub-commands. This commit brings the top level man page up to date. Note that I've kept the ordering of the subcommands the same as in `bpftool help`. Signed-off-by:
Daniel Xu <dxu@dxuuu.xyz> Signed-off-by:
Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/3049ef5dc509c0d1832f0a8b2dba2ccaad0af688.1647213551.git.dxu@dxuuu.xyz
-
Dmitrii Dolgov authored
Commit 82e6b1ee ("bpf: Allow to specify user-provided bpf_cookie for BPF perf links") introduced the concept of user specified bpf_cookie, which could be accessed by BPF programs using bpf_get_attach_cookie(). For troubleshooting purposes it is convenient to expose bpf_cookie via bpftool as well, so there is no need to meddle with the target BPF program itself. Implemented using the pid iterator BPF program to actually fetch bpf_cookies, which allows constraining code changes only to bpftool. $ bpftool link 1: type 7 prog 5 bpf_cookie 123 pids bootstrap(81) Signed-off-by:
Dmitrii Dolgov <9erthalion6@gmail.com> Signed-off-by:
Yonghong Song <yhs@fb.com> Acked-by:
Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20220309163112.24141-1-9erthalion6@gmail.com
-
Guo Zhengkui authored
Clean up the array_size.cocci warnings under tools/testing/selftests/bpf/: Use `ARRAY_SIZE(arr)` instead of forms like `sizeof(arr)/sizeof(arr[0])`. tools/testing/selftests/bpf/test_cgroup_storage.c uses ARRAY_SIZE() defined in tools/include/linux/kernel.h (sys/sysinfo.h -> linux/kernel.h), while others use ARRAY_SIZE() in bpf_util.h. Signed-off-by:
Guo Zhengkui <guozhengkui@vivo.com> Signed-off-by:
-
Niklas Söderlund authored
When running xdpsock for a fix duration of time before terminating using --duration=<n>, there is a race condition that may cause xdpsock to terminate immediately. When running for a fixed duration of time the check to determine when to terminate execution is in is_benchmark_done() and is being executed in the context of the poller thread, if (opt_duration > 0) { unsigned long dt = (get_nsecs() - start_time); if (dt >= opt_duration) benchmark_done = true; } However start_time is only set after the poller thread have been created. This leaves a small window when the poller thread is starting and calls is_benchmark_done() for the first time that start_time is not yet set. In that case start_time have its initial value of 0 and the duration check fails as it do not correlate correctly for the applications start time and immediately sets benchmark_done which in turn terminates the xdpsock application. Fix this by setting start_time before creating the poller thread. Fixes: d3f11b01 ("samples/bpf: xdpsock: Add duration option to specify how long to run") Signed-off-by:Niklas Söderlund <niklas.soderlund@corigine.com> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
-
Wang Yufen authored
If tcp_bpf_sendmsg is running during a tear down operation, psock may be freed. tcp_bpf_sendmsg() tcp_bpf_send_verdict() sk_msg_return() tcp_bpf_sendmsg_redir() unlikely(!psock)) sk_msg_free() The mem of msg has been uncharged in tcp_bpf_send_verdict() by sk_msg_return(), and would be uncharged by sk_msg_free() again. When psock is null, we can simply returning an error code, this would then trigger the sk_msg_free_nocharge in the error path of __SK_REDIRECT and would have the side effect of throwing an error up to user space. This would be a slight change in behavior from user side but would look the same as an error if the redirect on the socket threw an error. This issue can cause the following info: WARNING: CPU: 0 PID: 2136 at net/ipv4/af_inet.c:155 inet_sock_destruct+0x13c/0x260 Call Trace: <TASK> __sk_destruct+0x24/0x1f0 sk_psock_destroy+0x19b/0x1c0 process_one_work+0x1b3/0x3c0 worker_thread+0x30/0x350 ? process_one_work+0x3c0/0x3c0 kthread+0xe6/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK> Fixes: 604326b4 ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by:Wang Yufen <wangyufen@huawei.com> Signed-off-by:
-
Wang Yufen authored
In tcp_bpf_send_verdict(), if msg has more data after tcp_bpf_sendmsg_redir(): tcp_bpf_send_verdict() tosend = msg->sg.size //msg->sg.size = 22220 case __SK_REDIRECT: sk_msg_return() //uncharged msg->sg.size(22220) sk->sk_forward_alloc tcp_bpf_sendmsg_redir() //after tcp_bpf_sendmsg_redir, msg->sg.size=11000 goto more_data; tosend = msg->sg.size //msg->sg.size = 11000 case __SK_REDIRECT: sk_msg_return() //uncharged msg->sg.size(11000) to sk->sk_forward_alloc The msg->sg.size(11000) has been uncharged twice, to fix we can charge the remaining msg->sg.size before goto more data. This issue can cause the following info: WARNING: CPU: 0 PID: 9860 at net/core/stream.c:208 sk_stream_kill_queues+0xd4/0x1a0 Call Trace: <TASK> inet_csk_destroy_sock+0x55/0x110 __tcp_close+0x279/0x470 tcp_close+0x1f/0x60 inet_release+0x3f/0x80 __sock_release+0x3d/0xb0 sock_close+0x11/0x20 __fput+0x92/0x250 task_work_run+0x6a/0xa0 do_exit+0x33b/0xb60 do_group_exit+0x2f/0xa0 get_signal+0xb6/0x950 arch_do_signal_or_restart+0xac/0x2a0 ? vfs_write+0x237/0x290 exit_to_user_mode_prepare+0xa9/0x200 syscall_exit_to_user_mode+0x12/0x30 do_syscall_64+0x46/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> WARNING: CPU: 0 PID: 2136 at net/ipv4/af_inet.c:155 inet_sock_destruct+0x13c/0x260 Call Trace: <TASK> __sk_destruct+0x24/0x1f0 sk_psock_destroy+0x19b/0x1c0 process_one_work+0x1b3/0x3c0 worker_thread+0x30/0x350 ? process_one_work+0x3c0/0x3c0 kthread+0xe6/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK> Fixes: 604326b4 ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by:
-
Wang Yufen authored
If tcp_bpf_sendmsg() is running while sk msg is full. When sk_msg_alloc() returns -ENOMEM error, tcp_bpf_sendmsg() goes to wait_for_memory. If partial memory has been alloced by sk_msg_alloc(), that is, msg_tx->sg.size is greater than osize after sk_msg_alloc(), memleak occurs. To fix we use sk_msg_trim() to release the allocated memory, then goto wait for memory. Other call paths of sk_msg_alloc() have the similar issue, such as tls_sw_sendmsg(), so handle sk_msg_trim logic inside sk_msg_alloc(), as Cong Wang suggested. This issue can cause the following info: WARNING: CPU: 3 PID: 7950 at net/core/stream.c:208 sk_stream_kill_queues+0xd4/0x1a0 Call Trace: <TASK> inet_csk_destroy_sock+0x55/0x110 __tcp_close+0x279/0x470 tcp_close+0x1f/0x60 inet_release+0x3f/0x80 __sock_release+0x3d/0xb0 sock_close+0x11/0x20 __fput+0x92/0x250 task_work_run+0x6a/0xa0 do_exit+0x33b/0xb60 do_group_exit+0x2f/0xa0 get_signal+0xb6/0x950 arch_do_signal_or_restart+0xac/0x2a0 exit_to_user_mode_prepare+0xa9/0x200 syscall_exit_to_user_mode+0x12/0x30 do_syscall_64+0x46/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> WARNING: CPU: 3 PID: 2094 at net/ipv4/af_inet.c:155 inet_sock_destruct+0x13c/0x260 Call Trace: <TASK> __sk_destruct+0x24/0x1f0 sk_psock_destroy+0x19b/0x1c0 process_one_work+0x1b3/0x3c0 kthread+0xe6/0x110 ret_from_fork+0x22/0x30 </TASK> Fixes: 604326b4 ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by:
-
Wang Yufen authored
If tcp_bpf_sendmsg is running during a tear down operation we may enqueue data on the ingress msg queue while tear down is trying to free it. sk1 (redirect sk2) sk2 ------------------- --------------- tcp_bpf_sendmsg() tcp_bpf_send_verdict() tcp_bpf_sendmsg_redir() bpf_tcp_ingress() sock_map_close() lock_sock() lock_sock() ... blocking sk_psock_stop sk_psock_clear_state(psock, SK_PSOCK_TX_ENABLED); release_sock(sk); lock_sock() sk_mem_charge() get_page() sk_psock_queue_msg() sk_psock_test_state(psock, SK_PSOCK_TX_ENABLED); drop_sk_msg() release_sock() While drop_sk_msg(), the msg has charged memory form sk by sk_mem_charge and has sg pages need to put. To fix we use sk_msg_free() and then kfee() msg. This issue can cause the following info: WARNING: CPU: 0 PID: 9202 at net/core/stream.c:205 sk_stream_kill_queues+0xc8/0xe0 Call Trace: <IRQ> inet_csk_destroy_sock+0x55/0x110 tcp_rcv_state_process+0xe5f/0xe90 ? sk_filter_trim_cap+0x10d/0x230 ? tcp_v4_do_rcv+0x161/0x250 tcp_v4_do_rcv+0x161/0x250 tcp_v4_rcv+0xc3a/0xce0 ip_protocol_deliver_rcu+0x3d/0x230 ip_local_deliver_finish+0x54/0x60 ip_local_deliver+0xfd/0x110 ? ip_protocol_deliver_rcu+0x230/0x230 ip_rcv+0xd6/0x100 ? ip_local_deliver+0x110/0x110 __netif_receive_skb_one_core+0x85/0xa0 process_backlog+0xa4/0x160 __napi_poll+0x29/0x1b0 net_rx_action+0x287/0x300 __do_softirq+0xff/0x2fc do_softirq+0x79/0x90 </IRQ> WARNING: CPU: 0 PID: 531 at net/ipv4/af_inet.c:154 inet_sock_destruct+0x175/0x1b0 Call Trace: <TASK> __sk_destruct+0x24/0x1f0 sk_psock_destroy+0x19b/0x1c0 process_one_work+0x1b3/0x3c0 ? process_one_work+0x3c0/0x3c0 worker_thread+0x30/0x350 ? process_one_work+0x3c0/0x3c0 kthread+0xe6/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK> Fixes: 9635720b ("bpf, sockmap: Fix memleak on ingress msg enqueue") Signed-off-by:
-
- 11 Mar, 2022 14 commits
-
-
Yonghong Song authored
Building selftests/bpf with latest clang compiler (clang15 built from source), I hit the following compilation error: /.../prog_tests/send_signal.c:43:16: error: variable 'j' set but not used [-Werror,-Wunused-but-set-variable] volatile int j = 0; ^ 1 error generated. The problem also exists with clang13 and clang14. clang12 is okay. In send_signal.c, we have the following code ... volatile int j = 0; [...] for (int i = 0; i < 100000000 && !sigusr1_received; i++) j /= i + 1; ... to burn CPU cycles so bpf_send_signal() helper can be tested in NMI mode. Slightly changing 'j /= i + 1' to 'j /= i + j + 1' or 'j++' can fix the problem. Further investigation indicated this should be a clang bug ([1]). The upstream fix will be proposed later. But it is a good idea to workaround the issue to unblock people who build kernel/selftests with clang. [1] https://discourse.llvm.org/t/strange-clang-unused-but-set-variable-error-with-volatile-variables/60841Signed-off-by: -
Toke Høiland-Jørgensen authored
This adds an extra test to the xdp_do_redirect selftest for XDP live packet mode, which verifies that the maximum permissible packet size is accepted without any errors, and that a too big packet is correctly rejected. Signed-off-by:
-
Toke Høiland-Jørgensen authored
The live packet mode uses some extra space at the start of each page to cache data structures so they don't have to be rebuilt at every repetition. This space wasn't correctly accounted for in the size checking of the arguments supplied to userspace. In addition, the definition of the frame size should include the size of the skb_shared_info (as there is other logic that subtracts the size of this). Together, these mistakes resulted in userspace being able to trip the XDP_WARN() in xdp_update_frame_from_buff(), which syzbot discovered in short order. Fix this by changing the frame size define and adding the extra headroom to the bpf_prog_test_run_xdp() function. Also drop the max_len parameter to the page_pool init, since this is related to DMA which is not used for the page pool instance in PROG_TEST_RUN. Fixes: b530e9e1 ("bpf: Add "live packet" mode for XDP in BPF_PROG_RUN") Reported-by: syzbot+0e91362d99386dc5de99@syzkaller.appspotmail.com Signed-off-by:
-
Hao Luo authored
Previous patches have introduced the compiler attribute btf_type_tag for __user and __percpu. The availability of this attribute depends on some CONFIGs and compiler support. This patch refactors the use of btf_type_tag by introducing BTF_TYPE_TAG, which hides all the dependencies. No functional change. Suggested-by:
Hao Luo <haoluo@google.com> Signed-off-by:
-
Alexei Starovoitov authored
Roberto Sassu says: ==================== Extend the interoperability with IMA, to give wider flexibility for the implementation of integrity-focused LSMs based on eBPF. Patch 1 fixes some style issues. Patches 2-6 give the ability to eBPF-based LSMs to take advantage of the measurement capability of IMA without needing to setup a policy in IMA (those LSMs might implement the policy capability themselves). Patches 7-9 allow eBPF-based LSMs to evaluate files read by the kernel. Changelog v2: - Add better description to patch 1 (suggested by Shuah) - Recalculate digest if it is not fresh (when IMA_COLLECTED flag not set) - Move declaration of bpf_ima_file_hash() at the end (suggested by Yonghong) - Add tests to check if the digest has been recalculated - Add deny test for bpf_kernel_read_file() - Add description to tests v1: - Modify ima_file_hash() only and allow the usage of the function with the modified behavior by eBPF-based LSMs through the new function bpf_ima_file_hash() (suggested by Mimi) - Make bpf_lsm_kernel_read_file() sleepable so that bpf_ima_inode_hash() and bpf_ima_file_hash() can be called inside the implementation of eBPF-based LSMs for this hook ==================== Signed-off-by: -
Roberto Sassu authored
Check that bpf_kernel_read_file() denies the reading of an IMA policy, by ensuring that ima_setup.sh exits with an error. Signed-off-by:
Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by:
-
Roberto Sassu authored
Test the ability of bpf_lsm_kernel_read_file() to call the sleepable functions bpf_ima_inode_hash() or bpf_ima_file_hash() to obtain a measurement of a loaded IMA policy. Signed-off-by:
-
Roberto Sassu authored
Make bpf_lsm_kernel_read_file() as sleepable, so that bpf_ima_inode_hash() or bpf_ima_file_hash() can be called inside the implementation of this hook. Signed-off-by:
-
Roberto Sassu authored
Verify that bpf_ima_inode_hash() returns a non-fresh digest after a file write, and that bpf_ima_file_hash() returns a fresh digest. Verification is done by requesting the digest from the bprm_creds_for_exec hook, called before ima_bprm_check(). Signed-off-by:
-
Roberto Sassu authored
Add new test to ensure that bpf_ima_file_hash() returns the digest of the executed files. Signed-off-by:
-
Roberto Sassu authored
Move sample generator code to ima_test_common() so that the new function can be called by multiple LSM hooks. Signed-off-by:
-
Roberto Sassu authored
ima_file_hash() has been modified to calculate the measurement of a file on demand, if it has not been already performed by IMA or the measurement is not fresh. For compatibility reasons, ima_inode_hash() remains unchanged. Keep the same approach in eBPF and introduce the new helper bpf_ima_file_hash() to take advantage of the modified behavior of ima_file_hash(). Signed-off-by:
-
Roberto Sassu authored
__ima_inode_hash() checks if a digest has been already calculated by looking for the integrity_iint_cache structure associated to the passed inode. Users of ima_file_hash() (e.g. eBPF) might be interested in obtaining the information without having to setup an IMA policy so that the digest is always available at the time they call this function. In addition, they likely expect the digest to be fresh, e.g. recalculated by IMA after a file write. Although getting the digest from the bprm_committed_creds hook (as in the eBPF test) ensures that the digest is fresh, as the IMA hook is executed before that hook, this is not always the case (e.g. for the mmap_file hook). Call ima_collect_measurement() in __ima_inode_hash(), if the file descriptor is available (passed by ima_file_hash()) and the digest is not available/not fresh, and store the file measurement in a temporary integrity_iint_cache structure. This change does not cause memory usage increase, due to using the temporary integrity_iint_cache structure, and due to freeing the ima_digest_data structure inside integrity_iint_cache before exiting from __ima_inode_hash(). For compatibility reasons, the behavior of ima_inode_hash() remains unchanged. Signed-off-by:
Mimi Zohar <zohar@linux.ibm.com> Link: https://lore.kernel.org/bpf/20220302111404.193900-3-roberto.sassu@huawei.com
-
Roberto Sassu authored
Fix the following warnings in ima_main.c, displayed with W=n make argument: security/integrity/ima/ima_main.c:432: warning: Function parameter or member 'vma' not described in 'ima_file_mprotect' security/integrity/ima/ima_main.c:636: warning: Function parameter or member 'inode' not described in 'ima_post_create_tmpfile' security/integrity/ima/ima_main.c:636: warning: Excess function parameter 'file' description in 'ima_post_create_tmpfile' security/integrity/ima/ima_main.c:843: warning: Function parameter or member 'load_id' not described in 'ima_post_load_data' security/integrity/ima/ima_main.c:843: warning: Excess function parameter 'id' description in 'ima_post_load_data' Also, fix some style issues in the description of ima_post_create_tmpfile() and ima_post_path_mknod(). Signed-off-by:Shuah Khan <skhan@linuxfoundation.org> Reviewed-by:
-
- 10 Mar, 2022 8 commits
-
-
Chris J Arges authored
If a BPF map is created over 2^32 the memlock value as displayed in JSON format will be incorrect. Use atoll instead of atoi so that the correct number is displayed. ``` $ bpftool map create /sys/fs/bpf/test_bpfmap type hash key 4 \ value 1024 entries 4194304 name test_bpfmap $ bpftool map list 1: hash name test_bpfmap flags 0x0 key 4B value 1024B max_entries 4194304 memlock 4328521728B $ sudo bpftool map list -j | jq .[].bytes_memlock 33554432 ``` Signed-off-by:Chris J Arges <carges@cloudflare.com> Signed-off-by:
-
Yuntao Wang authored
Use offsetofend() instead of offsetof() + sizeof() to simplify MIN_BPF_LINEINFO_SIZE macro definition. Signed-off-by:
Yuntao Wang <ytcoode@gmail.com> Signed-off-by:
Joanne Koong <joannelkoong@gmail.com> Link: https://lore.kernel.org/bpf/20220310161518.534544-1-ytcoode@gmail.com
-
Hengqi Chen authored
Fix the descriptions of the return values of helper bpf_current_task_under_cgroup(). Fixes: c6b5fb86 ("bpf: add documentation for eBPF helpers (42-50)") Signed-off-by:
Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by:
-
Daniel Borkmann authored
Martin KaFai Lau says: ==================== This set is a follow up on the bpf side based on discussion [0]. Patch 1 is to remove some skbuff macros that are used in bpf filter.c. Patch 2 and 3 are to simplify the bpf insn rewrite on __sk_buff->tstamp. Patch 4 is to simplify the bpf uapi by modeling the __sk_buff->tstamp and __sk_buff->tstamp_type (was delivery_time_type) the same as its kernel counter part skb->tstamp and skb->mono_delivery_time. Patch 5 is to adjust the bpf selftests due to changes in patch 4. [0]: https://lore.kernel.org/bpf/419d994e-ff61-7c11-0ec7-11fefcb0186e@iogearbox.net/ ==================== Signed-off-by:
-
Martin KaFai Lau authored
The previous patch made the follow changes: - s/delivery_time_type/tstamp_type/ - s/bpf_skb_set_delivery_time/bpf_skb_set_tstamp/ - BPF_SKB_DELIVERY_TIME_* to BPF_SKB_TSTAMP_* This patch is to change the test_tc_dtime.c to reflect the above. Signed-off-by:
-
Martin KaFai Lau authored
This patch is to simplify the uapi bpf.h regarding to the tstamp type and use a similar way as the kernel to describe the value stored in __sk_buff->tstamp. My earlier thought was to avoid describing the semantic and clock base for the rcv timestamp until there is more clarity on the use case, so the __sk_buff->delivery_time_type naming instead of __sk_buff->tstamp_type. With some thoughts, it can reuse the UNSPEC naming. This patch first removes BPF_SKB_DELIVERY_TIME_NONE and also rename BPF_SKB_DELIVERY_TIME_UNSPEC to BPF_SKB_TSTAMP_UNSPEC and BPF_SKB_DELIVERY_TIME_MONO to BPF_SKB_TSTAMP_DELIVERY_MONO. The semantic of BPF_SKB_TSTAMP_DELIVERY_MONO is the same: __sk_buff->tstamp has delivery time in mono clock base. BPF_SKB_TSTAMP_UNSPEC means __sk_buff->tstamp has the (rcv) tstamp at ingress and the delivery time at egress. At egress, the clock base could be found from skb->sk->sk_clockid. __sk_buff->tstamp == 0 naturally means NONE, so NONE is not needed. With BPF_SKB_TSTAMP_UNSPEC for the rcv tstamp at ingress, the __sk_buff->delivery_time_type is also renamed to __sk_buff->tstamp_type which was also suggested in the earlier discussion: https://lore.kernel.org/bpf/b181acbe-caf8-502d-4b7b-7d96b9fc5d55@iogearbox.net/ The above will then make __sk_buff->tstamp and __sk_buff->tstamp_type the same as its kernel skb->tstamp and skb->mono_delivery_time counter part. The internal kernel function bpf_skb_convert_dtime_type_read() is then renamed to bpf_skb_convert_tstamp_type_read() and it can be simplified with the BPF_SKB_DELIVERY_TIME_NONE gone. A BPF_ALU32_IMM(BPF_AND) insn is also saved by using BPF_JMP32_IMM(BPF_JSET). The bpf helper bpf_skb_set_delivery_time() is also renamed to bpf_skb_set_tstamp(). The arg name is changed from dtime to tstamp also. It only allows setting tstamp 0 for BPF_SKB_TSTAMP_UNSPEC and it could be relaxed later if there is use case to change mono delivery time to non mono. prog->delivery_time_access is also renamed to prog->tstamp_type_access. Signed-off-by:
-
Martin KaFai Lau authored
BPF_JMP32_IMM(BPF_JSET) is used to save a BPF_ALU32_IMM(BPF_AND). The skb->tc_at_ingress and skb->mono_delivery_time are at the same offset, so only one BPF_LDX_MEM(BPF_B) is needed. Signed-off-by:
-
Martin KaFai Lau authored
The skb->tc_at_ingress and skb->mono_delivery_time are at the same byte offset. Thus, only one BPF_LDX_MEM(BPF_B) is needed and both bits can be tested together. /* BPF_READ: a = __sk_buff->tstamp */ if (skb->tc_at_ingress && skb->mono_delivery_time) a = 0; else a = skb->tstamp; Signed-off-by:
-
