- 01 Dec, 2020 6 commits
-
-
Jingwen Chen authored
power profile switch in vcn need to send SetWorkLoad msg to smu, which is not supported in sriov. Signed-off-by:
Jingwen Chen <Jingwen.Chen2@amd.com> Reviewed-by:
Jiange Zhao <Jiange.Zhao@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Jiansong Chen authored
It's in accordance with pmfw 65.18.0 for navy_flounder. Signed-off-by:
Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by:
Tao Zhou <tao.zhou1@amd.com> Signed-off-by:
-
James Zhu authored
Fixed warning: no previous prototype. Signed-off-by:
James Zhu <James.Zhu@amd.com> Reported-by:
kernel test robot <lkp@intel.com> Reviewed-by:
Nirmoy Das <nirmoy.das@amd.com> Signed-off-by:
-
Likun Gao authored
4MB reserved VRAM size which used for page tables was not enough for some condition, increase it to 8MB to reduce page table contention. Signed-off-by:
Likun Gao <Likun.Gao@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Stanley.Yang authored
The KFDTopologyTest.BasicTest will failed if skip smc, sdma, sos, ta and asd fw in SRIOV for vega10, so adjust above fw and skip load them in SRIOV only for navi12. v2: remove unnecessary asic type check. Signed-off-by:
Stanley.Yang <Stanley.Yang@amd.com> Reviewed-by:
Guchun Chen <guchun.chen@amd.com> Signed-off-by:
-
Stanley.Yang authored
noretry = 0 casue KFDGraphicsInterop test failed on SRIOV platform for vega10, so set noretry to 1 for vega10. Signed-off-by:
-
- 24 Nov, 2020 34 commits
-
-
Colin Ian King authored
The struct name smu_state_memroy_block contains a spelling mistake, rename it to smu_state_memory_block Fixes: 8554e67d ("drm/amd/powerplay: implement power_dpm_state sys interface for SMU11") Reviewed-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:382:23: warning: ‘ecc_umc_mcumc_status_addrs’ defined but not used [-Wunused-const-variable=] drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:720: warning: Function parameter or member 'vmhub' not described in 'gmc_v9_0_flush_gpu_tlb' drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:836: warning: Function parameter or member 'flush_type' not described in 'gmc_v9_0_flush_gpu_tlb_pasid' drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:836: warning: Function parameter or member 'all_hub' not described in 'gmc_v9_0_flush_gpu_tlb_pasid' Acked-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:382:23: warning: ‘ecc_umc_mcumc_status_addrs’ defined but not used [-Wunused-const-variable=] Acked-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c:618: warning: Function parameter or member 'flush_type' not described in 'gmc_v8_0_flush_gpu_tlb_pasid' drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c:618: warning: Function parameter or member 'all_hub' not described in 'gmc_v8_0_flush_gpu_tlb_pasid' drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c:657: warning: Function parameter or member 'vmhub' not described in 'gmc_v8_0_flush_gpu_tlb' drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c:657: warning: Function parameter or member 'flush_type' not described in 'gmc_v8_0_flush_gpu_tlb' drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c:998: warning: Function parameter or member 'pasid' not described in 'gmc_v8_0_vm_decode_fault' Acked-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c:433: warning: Function parameter or member 'flush_type' not described in 'gmc_v7_0_flush_gpu_tlb_pasid' drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c:433: warning: Function parameter or member 'all_hub' not described in 'gmc_v7_0_flush_gpu_tlb_pasid' drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c:471: warning: Function parameter or member 'vmhub' not described in 'gmc_v7_0_flush_gpu_tlb' drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c:471: warning: Function parameter or member 'flush_type' not described in 'gmc_v7_0_flush_gpu_tlb' drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c:771: warning: Function parameter or member 'pasid' not described in 'gmc_v7_0_vm_decode_fault' Acked-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:448: warning: Function parameter or member 'flags' not described in 'uvd_v4_2_ring_emit_fence' drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:448: warning: Excess function parameter 'fence' description in 'uvd_v4_2_ring_emit_fence' Acked-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/cik_sdma.c:282: warning: Function parameter or member 'flags' not described in 'cik_sdma_ring_emit_fence' drivers/gpu/drm/amd/amdgpu/cik_sdma.c:282: warning: Excess function parameter 'fence' description in 'cik_sdma_ring_emit_fence' Acked-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): In file included from drivers/gpu/drm/amd/amdgpu/dimgrey_cavefish_reg_init.c:28: drivers/gpu/drm/amd/amdgpu/../include/dimgrey_cavefish_ip_offset.h:151:29: warning: ‘UMC_BASE’ defined but not used [-Wunused-const-variable=] 151 | static const struct IP_BASE UMC_BASE = { { { { 0x00014000, 0x02425800, 0, 0, 0, 0 } }, | ^~~~~~~~ drivers/gpu/drm/amd/amdgpu/../include/dimgrey_cavefish_ip_offset.h:81:29: warning: ‘FUSE_BASE’ defined but not used [-Wunused-const-variable=] 81 | static const struct IP_BASE FUSE_BASE = { { { { 0x00017400, 0x02401400, 0, 0, 0, 0 } }, | ^~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../include/dimgrey_cavefish_ip_offset.h:74:29: warning: ‘DPCS_BASE’ defined but not used [-Wunused-const-variable=] 74 | static const struct IP_BASE DPCS_BASE = { { { { 0x00000012, 0x000000C0, 0x000034C0, 0x00009000, 0x02403C00, 0 } }, | ^~~~~~~~~ NB: Snipped lots of these Acked-by: -
Lee Jones authored
Fixes the following W=1 kernel build warning(s): In file included from drivers/gpu/drm/amd/amdgpu/vangogh_reg_init.c:28: drivers/gpu/drm/amd/amdgpu/../include/vangogh_ip_offset.h:210:29: warning: ‘USB_BASE’ defined but not used [-Wunused-const-variable=] 210 | static const struct IP_BASE USB_BASE = { { { { 0x0242A800, 0x05B00000, 0, 0, 0, 0 } }, | ^~~~~~~~ drivers/gpu/drm/amd/amdgpu/../include/vangogh_ip_offset.h:202:29: warning: ‘UMC_BASE’ defined but not used [-Wunused-const-variable=] 202 | static const struct IP_BASE UMC_BASE = { { { { 0x00014000, 0x02425800, 0, 0, 0, 0 } }, | ^~~~~~~~ drivers/gpu/drm/amd/amdgpu/../include/vangogh_ip_offset.h:178:29: warning: ‘PCIE0_BASE’ defined but not used [-Wunused-const-variable=] 178 | static const struct IP_BASE PCIE0_BASE = { { { { 0x00000000, 0x00000014, 0x00000D20, 0x00010400, 0x0241B000, 0x04040000 } }, | ^~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../include/vangogh_ip_offset.h:154:29: warning: ‘MP2_BASE’ defined but not used [-Wunused-const-variable=] 154 | static const struct IP_BASE MP2_BASE = { { { { 0x00016400, 0x02400800, 0x00F40000, 0x00F80000, 0x00FC0000, 0 } }, | ^~~~~~~~ NB: Snipped lots of these Acked-by: -
Lee Jones authored
Fixes the following W=1 kernel build warning(s): In file included from drivers/gpu/drm/amd/amdgpu/sienna_cichlid_reg_init.c:28: drivers/gpu/drm/amd/amdgpu/../include/sienna_cichlid_ip_offset.h:186:29: warning: ‘USB0_BASE’ defined but not used [-Wunused-const-variable=] 186 | static const struct IP_BASE USB0_BASE = { { { { 0x0242A800, 0x05B00000, 0, 0, 0 } }, | ^~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../include/sienna_cichlid_ip_offset.h:179:29: warning: ‘UMC_BASE’ defined but not used [-Wunused-const-variable=] 179 | static const struct IP_BASE UMC_BASE = { { { { 0x00014000, 0x02425800, 0, 0, 0 } }, | ^~~~~~~~ drivers/gpu/drm/amd/amdgpu/../include/sienna_cichlid_ip_offset.h:158:29: warning: ‘SDMA1_BASE’ defined but not used [-Wunused-const-variable=] 158 | static const struct IP_BASE SDMA1_BASE = { { { { 0x00001260, 0x0000A000, 0x0001C000, 0x02402C00, 0 } }, | ^~~~~~~~~~ NB: Snipped lots of these Acked-by: -
Lee Jones authored
Fixes the following W=1 kernel build warning(s): In file included from drivers/gpu/drm/amd/amdgpu/navi12_reg_init.c:27: drivers/gpu/drm/amd/amdgpu/../include/navi12_ip_offset.h:179:29: warning: ‘USB0_BASE’ defined but not used [-Wunused-const-variable=] 179 | static const struct IP_BASE USB0_BASE ={ { { { 0x0242A800, 0x05B00000, 0, 0, 0 } }, | ^~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../include/navi12_ip_offset.h:172:29: warning: ‘UMC_BASE’ defined but not used [-Wunused-const-variable=] 172 | static const struct IP_BASE UMC_BASE ={ { { { 0x00014000, 0x02425800, 0, 0, 0 } }, | ^~~~~~~~ drivers/gpu/drm/amd/amdgpu/../include/navi12_ip_offset.h:151:29: warning: ‘SDMA_BASE’ defined but not used [-Wunused-const-variable=] 151 | static const struct IP_BASE SDMA_BASE ={ { { { 0x00001260, 0x0000A000, 0x02402C00, 0, 0 } }, | ^~~~~~~~~ NB: Snipped a few of these Acked-by: -
Lee Jones authored
Fixes the following W=1 kernel build warning(s): In file included from drivers/gpu/drm/amd/amdgpu/navi14_reg_init.c:27: drivers/gpu/drm/amd/amdgpu/../include/navi14_ip_offset.h:179:29: warning: ‘USB0_BASE’ defined but not used [-Wunused-const-variable=] 179 | static const struct IP_BASE USB0_BASE ={ { { { 0x0242A800, 0x05B00000, 0, 0, 0 } }, | ^~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../include/navi14_ip_offset.h:172:29: warning: ‘UMC_BASE’ defined but not used [-Wunused-const-variable=] 172 | static const struct IP_BASE UMC_BASE ={ { { { 0x00014000, 0x02425800, 0, 0, 0 } }, | ^~~~~~~~ drivers/gpu/drm/amd/amdgpu/../include/navi14_ip_offset.h:151:29: warning: ‘SDMA_BASE’ defined but not used [-Wunused-const-variable=] 151 | static const struct IP_BASE SDMA_BASE ={ { { { 0x00001260, 0x0000A000, 0x02402C00, 0, 0 } }, | ^~~~~~~~~ NB: Snipped a few of these Acked-by: -
Lee Jones authored
Fixes the following W=1 kernel build warning(s): In file included from drivers/gpu/drm/amd/amdgpu/arct_reg_init.c:27: drivers/gpu/drm/amd/amdgpu/../include/arct_ip_offset.h:227:29: warning: ‘DBGU_IO_BASE’ defined but not used [-Wunused-const-variable=] 227 | static const struct IP_BASE DBGU_IO_BASE ={ { { { 0x000001E0, 0x000125A0, 0x0040B400, 0, 0, 0 } }, | ^~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../include/arct_ip_offset.h:127:29: warning: ‘PCIE0_BASE’ defined but not used [-Wunused-const-variable=] 127 | static const struct IP_BASE PCIE0_BASE ={ { { { 0x000128C0, 0x00411800, 0x04440000, 0, 0, 0 } }, | ^~~~~~~~~~ In file included from drivers/gpu/drm/amd/amdgpu/arct_reg_init.c:27: drivers/gpu/drm/amd/amdgpu/../include/arct_ip_offset.h:63:29: warning: ‘FUSE_BASE’ defined but not used [-Wunused-const-variable=] 63 | static const struct IP_BASE FUSE_BASE ={ { { { 0x000120A0, 0x00017400, 0x00401400, 0, 0, 0 } }, | ^~~~~~~~~ Acked-by: -
Lee Jones authored
Fixes the following W=1 kernel build warning(s): In file included from drivers/gpu/drm/amd/amdgpu/navi10_reg_init.c:27: drivers/gpu/drm/amd/amdgpu/../include/navi10_ip_offset.h:127:29: warning: ‘UMC_BASE’ defined but not used [-Wunused-const-variable=] 127 | static const struct IP_BASE UMC_BASE ={ { { { 0x00014000, 0, 0, 0, 0, 0 } }, | ^~~~~~~~ drivers/gpu/drm/amd/amdgpu/../include/navi10_ip_offset.h:109:29: warning: ‘RSMU_BASE’ defined but not used [-Wunused-const-variable=] 109 | static const struct IP_BASE RSMU_BASE = { { { { 0x00012000, 0, 0, 0, 0, 0 } }, | ^~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../include/navi10_ip_offset.h:61:29: warning: ‘FUSE_BASE’ defined but not used [-Wunused-const-variable=] 61 | static const struct IP_BASE FUSE_BASE ={ { { { 0x00017400, 0, 0, 0, 0, 0 } }, | ^~~~~~~~~ Acked-by: -
Lee Jones authored
In file included from drivers/gpu/drm/amd/amdgpu/vega20_reg_init.c:27: drivers/gpu/drm/amd/amdgpu/../include/vega20_ip_offset.h:154:29: warning: ‘XDMA_BASE’ defined but not used [-Wunused-const-variable= 154 | static const struct IP_BASE XDMA_BASE ={ { { { 0x00003400, 0, 0, 0, 0, 0 } }, | ^~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../include/vega20_ip_offset.h:63:29: warning: ‘FUSE_BASE’ defined but not used [-Wunused-const-variable=] 63 | static const struct IP_BASE FUSE_BASE ={ { { { 0x00017400, 0, 0, 0, 0, 0 } }, | ^~~~~~~~~ Fixes the following W=1 kernel build warning(s): Acked-by: -
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/dce_v6_0.c:192: warning: Function parameter or member 'async' not described in 'dce_v6_0_page_flip' drivers/gpu/drm/amd/amdgpu/dce_v6_0.c:1050: warning: Cannot understand * Acked-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:91: warning: Function parameter or member 'job' not described in 'uvd_v3_1_ring_emit_ib' drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:91: warning: Function parameter or member 'flags' not described in 'uvd_v3_1_ring_emit_ib' drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:108: warning: Function parameter or member 'addr' not described in 'uvd_v3_1_ring_emit_fence' drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:108: warning: Function parameter or member 'seq' not described in 'uvd_v3_1_ring_emit_fence' drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:108: warning: Function parameter or member 'flags' not described in 'uvd_v3_1_ring_emit_fence' drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:108: warning: Excess function parameter 'fence' description in 'uvd_v3_1_ring_emit_fence' drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:625: warning: Function parameter or member 'handle' not described in 'uvd_v3_1_hw_init' drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:625: warning: Excess function parameter 'adev' description in 'uvd_v3_1_hw_init' drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:692: warning: Function parameter or member 'handle' not described in 'uvd_v3_1_hw_fini' drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:692: warning: Excess function parameter 'adev' description in 'uvd_v3_1_hw_fini' Acked-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/gfx_v6_0.c:1903: warning: Function parameter or member 'timeout' not described in 'gfx_v6_0_ring_test_ib' Acked-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/si_dma.c:92: warning: Function parameter or member 'addr' not described in 'si_dma_ring_emit_fence' drivers/gpu/drm/amd/amdgpu/si_dma.c:92: warning: Function parameter or member 'seq' not described in 'si_dma_ring_emit_fence' drivers/gpu/drm/amd/amdgpu/si_dma.c:92: warning: Function parameter or member 'flags' not described in 'si_dma_ring_emit_fence' drivers/gpu/drm/amd/amdgpu/si_dma.c:92: warning: Excess function parameter 'fence' description in 'si_dma_ring_emit_fence' drivers/gpu/drm/amd/amdgpu/si_dma.c:252: warning: Function parameter or member 'timeout' not described in 'si_dma_ring_test_ib' drivers/gpu/drm/amd/amdgpu/si_dma.c:408: warning: Function parameter or member 'ring' not described in 'si_dma_ring_pad_ib' drivers/gpu/drm/amd/amdgpu/si_dma.c:446: warning: Function parameter or member 'vmid' not described in 'si_dma_ring_emit_vm_flush' drivers/gpu/drm/amd/amdgpu/si_dma.c:446: warning: Function parameter or member 'pd_addr' not described in 'si_dma_ring_emit_vm_flush' drivers/gpu/drm/amd/amdgpu/si_dma.c:446: warning: Excess function parameter 'vm' description in 'si_dma_ring_emit_vm_flush' drivers/gpu/drm/amd/amdgpu/si_dma.c:781: warning: Function parameter or member 'ib' not described in 'si_dma_emit_copy_buffer' drivers/gpu/drm/amd/amdgpu/si_dma.c:781: warning: Function parameter or member 'tmz' not described in 'si_dma_emit_copy_buffer' drivers/gpu/drm/amd/amdgpu/si_dma.c:781: warning: Excess function parameter 'ring' description in 'si_dma_emit_copy_buffer' drivers/gpu/drm/amd/amdgpu/si_dma.c:804: warning: Function parameter or member 'ib' not described in 'si_dma_emit_fill_buffer' drivers/gpu/drm/amd/amdgpu/si_dma.c:804: warning: Excess function parameter 'ring' description in 'si_dma_emit_fill_buffer' Acked-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:1590: warning: Function parameter or member 'instance' not described in 'gfx_v7_0_select_se_sh' drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:1788: warning: Excess function parameter 'se_num' description in 'gfx_v7_0_setup_rb' drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:1788: warning: Excess function parameter 'sh_per_se' description in 'gfx_v7_0_setup_rb' drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:1852: warning: Excess function parameter 'adev' description in 'DEFAULT_SH_MEM_BASES' drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2086: warning: Excess function parameter 'adev' description in 'gfx_v7_0_ring_test_ring' drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2130: warning: Function parameter or member 'ring' not described in 'gfx_v7_0_ring_emit_hdp_flush' drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2130: warning: Excess function parameter 'adev' description in 'gfx_v7_0_ring_emit_hdp_flush' drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2130: warning: Excess function parameter 'ridx' description in 'gfx_v7_0_ring_emit_hdp_flush' drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2182: warning: Function parameter or member 'ring' not described in 'gfx_v7_0_ring_emit_fence_gfx' drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2182: warning: Function parameter or member 'addr' not described in 'gfx_v7_0_ring_emit_fence_gfx' drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2182: warning: Function parameter or member 'seq' not described in 'gfx_v7_0_ring_emit_fence_gfx' drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2182: warning: Function parameter or member 'flags' not described in 'gfx_v7_0_ring_emit_fence_gfx' drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2182: warning: Excess function parameter 'adev' description in 'gfx_v7_0_ring_emit_fence_gfx' drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2182: warning: Excess function parameter 'fence' description in 'gfx_v7_0_ring_emit_fence_gfx' drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2224: warning: Function parameter or member 'ring' not described in 'gfx_v7_0_ring_emit_fence_compute' drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2224: warning: Function parameter or member 'addr' not described in 'gfx_v7_0_ring_emit_fence_compute' drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2224: warning: Function parameter or member 'seq' not described in 'gfx_v7_0_ring_emit_fence_compute' drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2224: warning: Function parameter or member 'flags' not described in 'gfx_v7_0_ring_emit_fence_compute' drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2224: warning: Excess function parameter 'adev' description in 'gfx_v7_0_ring_emit_fence_compute' drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2224: warning: Excess function parameter 'fence' description in 'gfx_v7_0_ring_emit_fence_compute' drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2260: warning: Function parameter or member 'job' not described in 'gfx_v7_0_ring_emit_ib_gfx' drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2260: warning: Function parameter or member 'flags' not described in 'gfx_v7_0_ring_emit_ib_gfx' drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2351: warning: Function parameter or member 'timeout' not described in 'gfx_v7_0_ring_test_ib' drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:3244: warning: Function parameter or member 'ring' not described in 'gfx_v7_0_ring_emit_vm_flush' drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:3244: warning: Function parameter or member 'vmid' not described in 'gfx_v7_0_ring_emit_vm_flush' drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:3244: warning: Function parameter or member 'pd_addr' not described in 'gfx_v7_0_ring_emit_vm_flush' drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:3244: warning: Excess function parameter 'adev' description in 'gfx_v7_0_ring_emit_vm_flush' Acked-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/cik_sdma.c:226: warning: Function parameter or member 'job' not described in 'cik_sdma_ring_emit_ib' drivers/gpu/drm/amd/amdgpu/cik_sdma.c:226: warning: Function parameter or member 'flags' not described in 'cik_sdma_ring_emit_ib' drivers/gpu/drm/amd/amdgpu/cik_sdma.c:278: warning: Function parameter or member 'addr' not described in 'cik_sdma_ring_emit_fence' drivers/gpu/drm/amd/amdgpu/cik_sdma.c:278: warning: Function parameter or member 'seq' not described in 'cik_sdma_ring_emit_fence' drivers/gpu/drm/amd/amdgpu/cik_sdma.c:278: warning: Function parameter or member 'flags' not described in 'cik_sdma_ring_emit_fence' drivers/gpu/drm/amd/amdgpu/cik_sdma.c:278: warning: Excess function parameter 'fence' description in 'cik_sdma_ring_emit_fence' drivers/gpu/drm/amd/amdgpu/cik_sdma.c:663: warning: Function parameter or member 'timeout' not described in 'cik_sdma_ring_test_ib' drivers/gpu/drm/amd/amdgpu/cik_sdma.c:808: warning: Function parameter or member 'ring' not described in 'cik_sdma_ring_pad_ib' drivers/gpu/drm/amd/amdgpu/cik_sdma.c:859: warning: Function parameter or member 'vmid' not described in 'cik_sdma_ring_emit_vm_flush' drivers/gpu/drm/amd/amdgpu/cik_sdma.c:859: warning: Function parameter or member 'pd_addr' not described in 'cik_sdma_ring_emit_vm_flush' drivers/gpu/drm/amd/amdgpu/cik_sdma.c:859: warning: Excess function parameter 'vm' description in 'cik_sdma_ring_emit_vm_flush' drivers/gpu/drm/amd/amdgpu/cik_sdma.c:1315: warning: Function parameter or member 'ib' not described in 'cik_sdma_emit_copy_buffer' drivers/gpu/drm/amd/amdgpu/cik_sdma.c:1315: warning: Function parameter or member 'tmz' not described in 'cik_sdma_emit_copy_buffer' drivers/gpu/drm/amd/amdgpu/cik_sdma.c:1315: warning: Excess function parameter 'ring' description in 'cik_sdma_emit_copy_buffer' drivers/gpu/drm/amd/amdgpu/cik_sdma.c:1339: warning: Function parameter or member 'ib' not described in 'cik_sdma_emit_fill_buffer' drivers/gpu/drm/amd/amdgpu/cik_sdma.c:1339: warning: Excess function parameter 'ring' description in 'cik_sdma_emit_fill_buffer' Acked-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/dce_v8_0.c:185: warning: Function parameter or member 'async' not described in 'dce_v8_0_page_flip' Acked-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:157: warning: Function parameter or member 'handle' not described in 'uvd_v4_2_hw_init' drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:157: warning: Excess function parameter 'adev' description in 'uvd_v4_2_hw_init' drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:212: warning: Function parameter or member 'handle' not described in 'uvd_v4_2_hw_fini' drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:212: warning: Excess function parameter 'adev' description in 'uvd_v4_2_hw_fini' drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:446: warning: Function parameter or member 'addr' not described in 'uvd_v4_2_ring_emit_fence' drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:446: warning: Function parameter or member 'seq' not described in 'uvd_v4_2_ring_emit_fence' drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:446: warning: Function parameter or member 'flags' not described in 'uvd_v4_2_ring_emit_fence' drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:446: warning: Excess function parameter 'fence' description in 'uvd_v4_2_ring_emit_fence' drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:513: warning: Function parameter or member 'job' not described in 'uvd_v4_2_ring_emit_ib' drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:513: warning: Function parameter or member 'flags' not described in 'uvd_v4_2_ring_emit_ib' Acked-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:115: warning: Function parameter or member 'adev' not described in 'amdgpu_virt_request_full_gpu' drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:115: warning: Excess function parameter 'amdgpu' description in 'amdgpu_virt_request_full_gpu' drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:138: warning: Function parameter or member 'adev' not described in 'amdgpu_virt_release_full_gpu' drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:138: warning: Excess function parameter 'amdgpu' description in 'amdgpu_virt_release_full_gpu' drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:159: warning: Function parameter or member 'adev' not described in 'amdgpu_virt_reset_gpu' drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:159: warning: Excess function parameter 'amdgpu' description in 'amdgpu_virt_reset_gpu' drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:194: warning: Function parameter or member 'adev' not described in 'amdgpu_virt_wait_reset' drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:194: warning: Excess function parameter 'amdgpu' description in 'amdgpu_virt_wait_reset' drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:210: warning: Function parameter or member 'adev' not described in 'amdgpu_virt_alloc_mm_table' drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:210: warning: Excess function parameter 'amdgpu' description in 'amdgpu_virt_alloc_mm_table' drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:239: warning: Function parameter or member 'adev' not described in 'amdgpu_virt_free_mm_table' drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:239: warning: Excess function parameter 'amdgpu' description in 'amdgpu_virt_free_mm_table' Acked-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/cik_ih.c:189: warning: Function parameter or member 'ih' not described in 'cik_ih_get_wptr' drivers/gpu/drm/amd/amdgpu/cik_ih.c:274: warning: Function parameter or member 'ih' not described in 'cik_ih_set_rptr' Acked-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c:127: warning: Function parameter or member 'job' not described in 'amdgpu_ib_schedule' Acked-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c:1214: warning: Function parameter or member 'page_flags' not described in 'amdgpu_ttm_tt_create' Acked-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/radeon/radeon_device.c:637:6: warning: no previous prototype for ‘radeon_device_is_virtual’ [-Wmissing-prototypes] Acked-by:
-
Simon Ser authored
Setting any rotation on the cursor plane is ignored by amdgpu. Because of DCE/DCN design, it's not possible to rotate the cursor. Instead of displaying the wrong result, stop advertising the rotation property for the cursor plane. Now that we check all cursor plane properties in amdgpu_dm_atomic_check, remove the TODO. Reviewed-by:
Simon Ser <contact@emersion.fr> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by:
-
Simon Ser authored
Don't allow user-space to set different scaling parameters for the cursor plane and for the primary plane. Because of DCE/DCN design, it's not possible to have a mismatch. The old check in dm_update_plane_state is superseded by this new check. Reviewed-by:
-
Simon Ser authored
Looking at handle_cursor_update, it doesn't seem like src_{x,y,w,h} are picked up by DC. I also tried to change these parameters via a test KMS client, and amdgpu ignored them. Instead of displaying the wrong result, reject the atomic commit. Reviewed-by: -
Simon Ser authored
This patch expands the cursor checks added in "drm/amd/display: add basic atomic check for cursor plane" to also include a FB size check. Without this patch, setting a FB smaller than max_cursor_size with an invalid width would result in amdgpu error messages and a fallback to a 64-byte width: [drm:hubp1_cursor_set_attributes [amdgpu]] *ERROR* Invalid cursor pitch of 100. Only 64/128/256 is supported on DCN. Note that DC uses the word "pitch" when actually checking the FB width. Indeed, the function handle_cursor_update does this: attributes.pitch = attributes.width; In my tests, the cursor FB actually had a pitch of 512 bytes. Reviewed-by:Pierre-Loup A. Griffais <pgriffais@valvesoftware.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by:
-
shaoyunl authored
This function actually control the vblank on/off. It shouldn't be bypassed for VF. Otherwise all the vblank based feature on VF will not work. Signed-off-by:
shaoyunl <shaoyun.liu@amd.com> Reviewed-by:
-
Yongqiang Sun authored
[Why & How] Update init soc bounding box and bw bounding box for DCN3.01. Remove pp smu interface which isn't used. v2: squash in removal of stable function definition (Alex) Signed-off-by:
Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by:
Tony Cheng <Tony.Cheng@amd.com> Acked-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
-
