Same as the previous patch, but for Kepler2 now
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This enables BLCG optimization for kepler1. When using clockgating,
nvidia's firmware has a set of registers which are initially programmed
by the vbios with various engine delays and other mysterious settings
that are safe enough to bring up the GPU. However, the values used by
the vbios are more power hungry then they need to be, so the nvidia driver
writes it's own more optimized set of BLCG settings before enabling
CG_CTRL. This adds support for programming the optimized BLCG values
during engine/subdev init, which enables rather significant power
savings.

This introduces the nvkm_therm_clkgate_init() helper, which we use to
program the optimized BLCG settings before enabling clockgating with
nvkm_therm_clkgate_enable.

As well, this commit shares a lot more code with Fermi since BLCG is
mostly the same there as far as we can tell. In the future, it's likely
we'll reformat the clkgate_packs for kepler1 so that they share a list
of mmio packs with Fermi.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This adds support for enabling automatic clockgating on nvidia GPUs for
Kepler1. While this is not technically a clockgating level, it does
enable clockgating using the clockgating values initially set by the
vbios (which should be safe to use).

This introduces two therm helpers for controlling basic clockgating:
	nvkm_therm_clkgate_enable() - enables clockgating through
	CG_CTRL, done after initializing the GPU fully
	nvkm_therm_clkgate_fini() - prepares clockgating for suspend or
	driver unload

A lot of this code was originally going to be based off of fermi;
however it turns out that while Fermi's the first line of GPUs that
introduced this kind of power saving, Fermi requires more fine tuned
control of the CG_CTRL registers from the driver while reclocking that
we don't entirely understand yet.

For the simple parts we will be sharing with Fermi for certain however,
we at least add those into a new subdev/therm/gf100.h header.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

We've still been directly using the legacy crtc gamma_set() hook even
after conversion to atomic modesetting.

For userspace clients this was fine, however, fbcon will use the atomic
property when it's running on an atomic driver, which means we miss its
colormap updates - which is particularly bad for 8bpp framebuffers!

This commit converts the driver to use the atomic property + the helper
function implementing the legacy hook on top of atomic.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80675Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

For some reason forgotten by history, we've been using a 1025-entry LUT
mode, and sparsely filling it with the 256-entry LUT we're handed.

Until we land support for the full atomic colour management properties,
this commit switches to using the 257-entry mode to fix colour mapping
with depth 30 framebuffers.
Reported-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This is what was done prior to the big refactor in kernel 3.8, and what
was done by xf86-video-nv. Experimentally, it seems like there's some
sort of issue with the high-res lut to be used there. Tested on G92.

This ends up mattering because fbcon/fbdev chooses the C8 fb format for
low-vram systems, which can occur with some IGP-based configurations
with little "stolen" vram.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80675Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

We need to double-buffer LUTs to handle their update atomically.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This is a common, awkward sequence.  Let's wrap it up!
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Useful for debugging.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Gourav Samaiya <gsamaiya@nvidia.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Gourav Samaiya <gsamaiya@nvidia.com>

It's entirely possibly that the other r375 code is relevant to r370 too,
but I've not confirmed this, so I'll leave it where it is for now.

NVIDIA's copyright headers maintained, as it's still all their code.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Gourav Samaiya <gsamaiya@nvidia.com>

gcc-8 reports

drivers/gpu/drm/nouveau/nvkm/engine/pm/base.c: In function 'nvkm_perfmon_mthd':
include/linux/string.h:265:9: error: '__builtin_strncpy' specified bound 64 equals destination size [-Werror=stringop-truncation]

We need one less byte or call strlcpy() to make it a
nul-terminated string.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

The kbuild test bot complained about a new coccinelle warning nearby,
which sparked a discussion about the assignment to 'memory' inside of
the conditional expression.  See Link below for the original post.

Fix the assignment to silence the coccinelle warning and also make the
code look a little nicer.

Link: https://lists.freedesktop.org/archives/nouveau/2017-November/029242.htmlSigned-off-by: Christoph Böhmwalder <christoph@boehmwalder.at>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>

Fixes failure to compile with recent envyas as a result of the 'movw'
alias being removed for v5.

A bit of history:

v3 only has a 16-bit sign-extended immediate mov op. In order to set
the high bits, there's a separate 'sethi' op. envyas validates that
the value passed to mov(imm) is between -0x8000 and 0x7fff. In order
to simplify macros that load both the low and high word, a 'movw'
alias was added which takes an unsigned 16-bit immediate. However the
actual hardware op still sign extends.

v5 has a full 32-bit immediate mov op. The v3 16-bit immediate mov op
is gone (loads 0 into the dst reg). However due to a bug in envyas,
the movw alias still existed, and selected the no-longer-present v3
16-bit immediate mov op. As a result usage of movw on v5 is the same
as mov with a 0x0 argument.

The proper fix throughout is to only ever use the 'movw' alias in
combination with 'sethi'. Anything else should get the sign-extended
validation to ensure that the intended value ends up in the
destination register.

Changes in fuc3 binaries is the result of a different encoding being
selected for a mov with an 8-bit value.

v2: added commit message written by Ilia, thanks for that!
v3: messed up rebasing, now it should apply
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

In the past the ast driver relied upon the fbdev emulation helpers to
call ->load_lut at boot-up. But since

commit b8e2b019
Author: Peter Rosin <peda@axentia.se>
Date:   Tue Jul 4 12:36:57 2017 +0200

    drm/fb-helper: factor out pseudo-palette

that's cleaned up and drivers are expected to boot into a consistent
lut state. This patch fixes that.

Fixes: b8e2b019 ("drm/fb-helper: factor out pseudo-palette")
Cc: Peter Rosin <peda@axenita.se>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org> # v4.14+
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=198123
Cc: Bill Fraser <bill.fraser@gmail.com>
Reported-and-Tested-by: Bill Fraser <bill.fraser@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'drm-misc-next-fixes-2018-01-31' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

This contains a fix to restrict what lessee can do with masters and
another one when waiting for timeouts on reservation objects.

* tag 'drm-misc-next-fixes-2018-01-31' of git://anongit.freedesktop.org/drm/drm-misc:
  drm: Check for lessee in DROP_MASTER ioctl
  dma-buf: fix reservation_object_wait_timeout_rcu once more v2

Don't let a lessee control what the current DRM master is set to;
that's the job of the "real" master. Otherwise, the lessee would
disable all access to master operations for the owner and all lessees
under it.

This matches the same check made in the SET_MASTER ioctl.
Signed-off-by: Keith Packard <keithp@keithp.com>
Fixes: 2ed077e4 ("drm: Add drm_object lease infrastructure [v5]")
Cc: <stable@vger.kernel.org> # v4.15+
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180119015159.1606-1-keithp@keithp.com

Merge tag 'drm-misc-next-fixes-2018-01-18' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

Fixes for 4.16:

Fixes one Kconfig issue and a enable some panels to work properly.
There is also a fix of error code return in sun4i.

* tag 'drm-misc-next-fixes-2018-01-18' of git://anongit.freedesktop.org/drm/drm-misc:
  drm: Fix PANEL_ORIENTATION_QUIRKS breaking the Kconfig DRM menuconfig
  drm/panel: lvds: Handle the optional regulator case properly
  drm/sun4i: Fix error code in sun4i_tcon_bind()

 A few more fixes for 4.16, nothing major.

A few more fixes for 4.16.  This is on top of the pull request from
last week.  Most notable change here is a fix to the link order for
the now separate from amdgpu GPU scheduler to fix crashes when the
modules are build into the kernel rather than as modules.

* 'drm-next-4.16' of git://people.freedesktop.org/~agd5f/linux:
  drm: fix gpu scheduler link order
  drm/amd/display: Demote error print to debug print when ATOM impl missing
  drm/amdgpu: Avoid leaking PM domain on driver unbind (v2)
  drm/amd/amdgpu: Add Polaris version check
  drm/amdgpu: Reenable manual GPU reset from sysfs
  drm/amdgpu: disable MMHUB power gating on raven
  drm/ttm: Don't unreserve swapped BOs that were previously reserved
  drm/ttm: Don't add swapped BOs to swap-LRU list
  drm/amdgpu: only check for ECC on Vega10
  drm/amd/powerplay: Fix smu_table_entry.handle type
  drm/ttm: add VADDR_FLAG_UPDATED_COUNT to correctly update dma_page global count
  drm/radeon: fill in rb backend map on evergreen/ni.
  drm/amdgpu/gfx9: fix ngg enablement to clear gds reserved memory (v2)
  drm/ttm: only free pages rather than update global memory count together
  drm/amdgpu: fix CPU based VM updates
  drm/amdgpu: fix typo in amdgpu_vce_validate_bo
  drm/amdgpu: fix amdgpu_vm_pasid_fault_credit
  drm/ttm: check the return value of register_shrinker
  drm/radeon: fix sparse warning: Should it be static?

It should initialize before the drivers using it.
Signed-off-by: Christian König <christian.koenig@amd.com>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=104736Reviewed-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

I assumed wrongfully that all relevant functions should be implemented.
Apparently this isn't the case. Demote the print to debug level for now.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We need to set shared_count even if we already have a fence to wait for.

v2: init i to -1 as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Tested-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180122200003.6665-1-christian.koenig@amd.com

We only support vga_switcheroo and runtime pm on PX/HG systems
so forcing runpm to 1 doesn't do anything useful anyway.

Only call vga_switcheroo_init_domain_pm_ops() for PX/HG so
that the cleanup path is correct as well.  This mirrors what
radeon does as well.

v2: rework the patch originally sent by Lukas (Alex)
Acked-by: Lukas Wunner <lukas@wunner.de>
Reported-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de> (v1)
Cc: stable@vger.kernel.org

Add Polaris version check if firmware support UVD encode
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Otherwise it keeps rejecting the reset.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

MMHUB power gating still has issue, and doesn't work on raven at current. So
disable it for the moment.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

If ttm_bo_swapout doesn't own the lock, don't release it. Someone
else probably depends on it still being locked.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

A BO that's already swapped would be added back to the swap-LRU list
for example if its validation failed under high memory pressure. This
could later lead to swapping it out again and leaking previous swap
storage.

This commit adds a condition to prevent that from happening.

v2: Check page_flags instead of swap_storage
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

RV doesn't support it.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

The handle describes kernel logical address, should be
unsigned long and not uint32_t.
Fixes KASAN error and GFP on driver unload.
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

add this for correctly updating global mem count in ttm_mem_zone.
before that when ttm_mem_global_alloc_page fails, we would update all
dma_page's global mem count in ttm_dma->pages_list. but actually here
we should not update for the last dma_page.

v2: only the update of last dma_page is not right
v3: use lower bits of dma_page vaddr
Signed-off-by: Roger He <Hongbo.He@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'drm-amdkfd-next-fixes-2018-01-15' of git://people.freedesktop.org/~gabbayo/linux into drm-next

- fix NULL pointer dereference
- fix compiler warning on large define values
- remove unnecessary call to execute_queues_cpsch

* tag 'drm-amdkfd-next-fixes-2018-01-15' of git://people.freedesktop.org/~gabbayo/linux:
  drm/amdkfd: Fix potential NULL pointer dereferences
  drm/amdkfd: add ull suffix to 64bit defines
  drm/amdkfd: don't always call execute_queues_cpsch()
  drm/amdkfd: Fix return value 0 when execute_queues_cpsch fails

Linux 4.15-rc8

Daniel requested this for so the intel CI won't fall over on drm-next
so often.

All Kconfig menu menu entries should have a depends on MENU_OPTION, the
menu stops after the first Kconfig entry without this depends on.

Since the PANEL_ORIENTATION_QUIRKS option is also used outside of DRM,
it deliberately does not have a depends on DRM, but this causes all
items after it to show as separate items rather then under the DRM
menuconfig.

This commit moves PANEL_ORIENTATION_QUIRKS to the end of the drm Kconfig
file, grouping it with DRM_LIB_RANDOM which also does not depend on DRM,
fixing the DRM menuconfig.

Fixes: 404d1a3e ("drm: Add panel orientation quirks, v6.")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180117081032.6411-1-hdegoede@redhat.com

This looks to have never gotten filled in, and it seems to
 trigger a bug in mesa.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reported-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

v2: fix register access
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Ken Wang <ken.wang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

if ttm_get_pages or ttm_mem_global_alloc_page fail, should not update
global memory count.
Signed-off-by: Roger He <Hongbo.He@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

That got accidentially removed.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Otherwise buffer placement is very restrictive and might fail.

Fixes: "drm/amdgpu: fix VCE buffer placement restrictions v2"
Signed-off-by: Christian König <christian.koenig@amd.com>
Reported-by: Deng, Emily <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org