Systems running CPU-bound real-time task do not want IPIs sent to CPUs
executing nohz_full userspace tasks.  Battery-powered systems don't
want IPIs sent to idle CPUs in low-power mode.  Unfortunately, RCU tasks
trace can and will send such IPIs in some cases.

Both of these situations occur only when the target CPU is in RCU
dyntick-idle mode, in other words, when RCU is not watching the
target CPU.  This suggests that CPUs in dyntick-idle mode should use
memory barriers in outermost invocations of rcu_read_lock_trace()
and rcu_read_unlock_trace(), which would allow the RCU tasks trace
grace period to directly read out the target CPU's read-side state.
One challenge is that RCU tasks trace is not targeting a specific
CPU, but rather a task.  And that task could switch from one CPU to
another at any time.

This commit therefore uses try_invoke_on_locked_down_task()
and checks for task_curr() in trc_inspect_reader_notrunning().
When this condition holds, the target task is running and cannot move.
If CONFIG_TASKS_TRACE_RCU_READ_MB=y, the new rcu_dynticks_zero_in_eqs()
function can be used to check if the specified integer (in this case,
t->trc_reader_nesting) is zero while the target CPU remains in that same
dyntick-idle sojourn.  If so, the target task is in a quiescent state.
If not, trc_read_check_handler() must indicate failure so that the
grace-period kthread can take appropriate action or retry after an
appropriate delay, as the case may be.

With this change, given CONFIG_TASKS_TRACE_RCU_READ_MB=y, if a given
CPU remains idle or a given task continues executing in nohz_full mode,
the RCU tasks trace grace-period kthread will detect this without the
need to send an IPI.
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

This commit provides a new TASKS_TRACE_RCU_READ_MB Kconfig option that
enables use of read-side memory barriers by both rcu_read_lock_trace()
and rcu_read_unlock_trace() when the are executed with the
current->trc_reader_special.b.need_mb flag set.  This flag is currently
never set.  Doing that is the subject of a later commit.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

This commit adds a grace-period count and a count of IPIs sent since
boot, which is printed in response to rcutorture writer stalls and at
the end of rcutorture testing.  These counts will be used to evaluate
various schemes to reduce the number of IPIs sent.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

This commit splits ->trc_reader_need_end by using the rcu_special union.
This change permits readers to check to see if a memory barrier is
required without any added overhead in the common case where no such
barrier is required.  This commit also adds the read-side checking.
Later commits will add the machinery to properly set the new
->trc_reader_special.b.need_mb field.

This commit also makes rcu_read_unlock_trace_special() tolerate nested
read-side critical sections within interrupt and NMI handlers.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

This commit provides a rcupdate.rcu_task_ipi_delay kernel boot parameter
that specifies how old the RCU tasks trace grace period must be before
the grace-period kthread starts sending IPIs.  This delay allows more
tasks to pass through rcu_tasks_qs() quiescent states, thus reducing
(or even eliminating) the number of IPIs that must be sent.

On a short rcutorture test setting this kernel boot parameter to HZ/2
resulted in zero IPIs for all 877 RCU-tasks trace grace periods that
elapsed during that test.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

This commit adds a place to record the grace-period start in jiffies.
This will be used by later commits for debugging purposes and to throttle
IPIs early in the grace period.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

This commit makes the calls to rcu_tasks_qs() detect and report
quiescent states for RCU tasks trace.  If the task is in a quiescent
state and if ->trc_reader_checked is not yet set, the task sets its own
->trc_reader_checked.  This will cause the grace-period kthread to
remove it from the holdout list if it still remains there.

[ paulmck: Fix conditional compilation per kbuild test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

This commit adds grace-period state and time to the rcutorture writer
stall output.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

This commit adds state for each RCU-tasks flavor to the rcutorture
writer stall output.  The initial state is minimal, but you have to
start somewhere.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
[ paulmck: Fixes based on feedback from kbuild test robot. ]

This commit pushes the #ifdef CONFIG_TASKS_RCU_GENERIC from
kernel/rcu/update.c to kernel/rcu/tasks.h in order to improve
readability as more APIs are added.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

This commit adds RCU CPU stall warnings for RCU Tasks Trace.  These
dump out any tasks blocking the current grace period, as well as any
CPUs that have not responded to an IPI request.  This happens in two
phases, when initially extracting state from the tasks and later when
waiting for any holdout tasks to check in.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

This commit adds the definitions required to torture the tracing flavor
of RCU tasks.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

Because RCU does not watch exception early-entry/late-exit, idle-loop,
or CPU-hotplug execution, protection of tracing and BPF operations is
needlessly complicated.  This commit therefore adds a variant of
Tasks RCU that:

o	Has explicit read-side markers to allow finite grace periods in
	the face of in-kernel loops for PREEMPT=n builds.  These markers
	are rcu_read_lock_trace() and rcu_read_unlock_trace().

o	Protects code in the idle loop, exception entry/exit, and
	CPU-hotplug code paths.  In this respect, RCU-tasks trace is
	similar to SRCU, but with lighter-weight readers.

o	Avoids expensive read-side instruction, having overhead similar
	to that of Preemptible RCU.

There are of course downsides:

o	The grace-period code can send IPIs to CPUs, even when those
	CPUs are in the idle loop or in nohz_full userspace.  This is
	mitigated by later commits.

o	It is necessary to scan the full tasklist, much as for Tasks RCU.

o	There is a single callback queue guarded by a single lock,
	again, much as for Tasks RCU.  However, those early use cases
	that request multiple grace periods in quick succession are
	expected to do so from a single task, which makes the single
	lock almost irrelevant.  If needed, multiple callback queues
	can be provided using any number of schemes.

Perhaps most important, this variant of RCU does not affect the vanilla
flavors, rcu_preempt and rcu_sched.  The fact that RCU Tasks Trace
readers can operate from idle, offline, and exception entry/exit in no
way enables rcu_preempt and rcu_sched readers to do so.

The memory ordering was outlined here:
https://lore.kernel.org/lkml/20200319034030.GX3199@paulmck-ThinkPad-P72/

This effort benefited greatly from off-list discussions of BPF
requirements with Alexei Starovoitov and Andrii Nakryiko.  At least
some of the on-list discussions are captured in the Link: tags below.
In addition, KCSAN was quite helpful in finding some early bugs.

Link: https://lore.kernel.org/lkml/20200219150744.428764577@infradead.org/
Link: https://lore.kernel.org/lkml/87mu8p797b.fsf@nanos.tec.linutronix.de/
Link: https://lore.kernel.org/lkml/20200225221305.605144982@linutronix.de/
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andrii Nakryiko <andriin@fb.com>
[ paulmck: Apply feedback from Steve Rostedt and Joel Fernandes. ]
[ paulmck: Decrement trc_n_readers_need_end upon IPI failure. ]
[ paulmck: Fix locking issue reported by rcutorture. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

This commit does nothing but move rcu_tasks_wait_gp() up to a new section
for common code.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

This commit refactors RCU tasks to allow variants to be added.  These
variants will share the current Tasks-RCU tasklist scan and the holdout
list processing.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

This commit causes the flavors of RCU Tasks to use different names
for their kthreads and in their console messages.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

This commit adds the definitions required to torture the rude flavor of
RCU tasks.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

This commit adds a "rude" variant of RCU-tasks that has as quiescent
states schedule(), cond_resched_tasks_rcu_qs(), userspace execution,
and (in theory, anyway) cond_resched().  In other words, RCU-tasks rude
readers are regions of code with preemption disabled, but excluding code
early in the CPU-online sequence and late in the CPU-offline sequence.
Updates make use of IPIs and force an IPI and a context switch on each
online CPU.  This variant is useful in some situations in tracing.
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
[ paulmck: Apply EXPORT_SYMBOL_GPL() feedback from Qiujun Huang. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
[ paulmck: Apply review feedback from Steve Rostedt. ]

This commit splits out generic processing from RCU-tasks-specific
processing in order to allow additional flavors to be added.  It also
adds a def_bool TASKS_RCU_GENERIC to enable the common RCU-tasks
infrastructure code.

This is primarily, but not entirely, a code-movement commit.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

This commit adds a crude test for synchronize_rcu_mult().  This is
currently a smoke test rather than a high-quality stress test.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

With the advent and likely usage of synchronize_rcu_rude(), there is
again a need to wait on multiple types of RCU grace periods, for
example, call_rcu_tasks() and call_rcu_tasks_rude().  This commit
therefore reinstates synchronize_rcu_mult() in order to allow these
grace periods to be straightforwardly waited on concurrently.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

This commit creates an rcu_tasks struct to hold state information for
RCU Tasks.  This is a preparation commit for adding additional flavors
of Tasks RCU, each of which would have its own rcu_tasks struct.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

This code-movement-only commit is in preparation for adding an additional
flavor of Tasks RCU, which relies on workqueues to detect grace periods.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

Currently, an RCU-preempt CPU stall warning simply lists the PIDs of
those tasks holding up the current grace period.  This can be helpful,
but more can be even more helpful.

To this end, this commit adds the nesting level, whether the task
thinks it was preempted in its current RCU read-side critical section,
whether RCU core has asked this task for a quiescent state, whether the
expedited-grace-period hint is set, and whether the task believes that
it is on the blocked-tasks list (it must be, or it would not be printed,
but if things are broken, best not to take too much for granted).
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

A running task's state can be sampled in a consistent manner (for example,
for diagnostic purposes) simply by invoking smp_call_function_single()
on its CPU, which may be obtained using task_cpu(), then having the
IPI handler verify that the desired task is in fact still running.
However, if the task is not running, this sampling can in theory be done
immediately and directly.  In practice, the task might start running at
any time, including during the sampling period.  Gaining a consistent
sample of a not-running task therefore requires that something be done
to lock down the target task's state.

This commit therefore adds a try_invoke_on_locked_down_task() function
that invokes a specified function if the specified task can be locked
down, returning true if successful and if the specified function returns
true.  Otherwise this function simply returns false.  Given that the
function passed to try_invoke_on_nonrunning_task() might be invoked with
a runqueue lock held, that function had better be quite lightweight.

The function is passed the target task's task_struct pointer and the
argument passed to try_invoke_on_locked_down_task(), allowing easy access
to task state and to a location for further variables to be passed in
and out.

Note that the specified function will be called even if the specified
task is currently running.  The function can use ->on_rq and task_curr()
to quickly and easily determine the task's state, and can return false
if this state is not to the function's liking.  The caller of the
try_invoke_on_locked_down_task() would then see the false return value,
and could take appropriate action, for example, trying again later or
sending an IPI if matters are more urgent.

It is expected that use cases such as the RCU CPU stall warning code will
simply return false if the task is currently running.  However, there are
use cases involving nohz_full CPUs where the specified function might
instead fall back to an alternative sampling scheme that relies on heavier
synchronization (such as memory barriers) in the target task.

Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
[ paulmck: Apply feedback from Peter Zijlstra and Steven Rostedt. ]
[ paulmck: Invoke if running to handle feedback from Mathieu Desnoyers. ]
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

Currently, the PREEMPT=y version of rcu_note_context_switch() does not
invoke rcu_tasks_qs(), and we need it to in order to keep RCU Tasks
Trace's IPIs down to a dull roar.  This commit therefore enables this
hook.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

It is not as clear as it might be just where in RCU's idle entry/exit
code RCU stops and starts watching the current CPU.  This commit therefore
adds comments calling out the transitions.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

Now that it should be safe to hold scheduler locks across
rcu_read_unlock(), even in cases where the corresponding RCU read-side
critical section might have been preempted and boosted, the commit adds
a test of this capability to rcutorture.  This has been tested on current
mainline (which can deadlock in this situation), and lockdep duly reported
the expected deadlock.  On -rcu, lockdep is silent, thus far, anyway.

Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

Now that RCU flavors have been consolidated, an RCU-preempt
rcu_read_unlock() in an interrupt or softirq handler cannot possibly
end the RCU read-side critical section.  Consider the old vulnerability
involving rcu_read_unlock() being invoked within such a handler that
interrupted an __rcu_read_unlock_special(), in which a wakeup might be
invoked with a scheduler lock held.  Because rcu_read_unlock_special()
no longer does wakeups in such situations, it is no longer necessary
for __rcu_read_unlock() to set the nesting level negative.

This commit therefore removes this recursion-protection code from
__rcu_read_unlock().

[ paulmck: Let rcu_exp_handler() continue to call rcu_report_exp_rdp(). ]
[ paulmck: Adjust other checks given no more negative nesting. ]
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

The ->rcu_read_unlock_special.b.deferred_qs field is set to true in
rcu_read_unlock_special() but never set to false.  This is not
particularly useful, so this commit removes this field.

The only possible justification for this field is to ease debugging
of RCU deferred quiscent states, but the combination of the other
->rcu_read_unlock_special fields plus ->rcu_blocked_node and of course
->rcu_read_lock_nesting should cover debugging needs.  And if this last
proves incorrect, this patch can always be reverted, along with the
required setting of ->rcu_read_unlock_special.b.deferred_qs to false
in rcu_preempt_deferred_qs_irqrestore().
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

Now that RCU flavors have been consolidated, an RCU-preempt
rcu_read_unlock() in an interrupt or softirq handler cannot possibly
end the RCU read-side critical section.  Consider the old vulnerability
involving rcu_preempt_deferred_qs() being invoked within such a handler
that interrupted an extended RCU read-side critical section, in which
a wakeup might be invoked with a scheduler lock held.  Because
rcu_read_unlock_special() no longer does wakeups in such situations,
it is no longer necessary for rcu_preempt_deferred_qs() to set the
nesting level negative.

This commit therefore removes this recursion-protection code from
rcu_preempt_deferred_qs().

[ paulmck: Fix typo in commit log per Steve Rostedt. ]
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

The scheduler is currently required to hold rq/pi locks across the entire
RCU read-side critical section or not at all.  This is inconvenient and
leaves traps for the unwary, including the author of this commit.

But now that excessively long grace periods enable scheduling-clock
interrupts for holdout nohz_full CPUs, the nohz_full rescue logic in
rcu_read_unlock_special() can be dispensed with.  In other words, the
rcu_read_unlock_special() function can refrain from doing wakeups unless
such wakeups are guaranteed safe.

This commit therefore avoids unsafe wakeups, freeing the scheduler to
hold rq/pi locks across rcu_read_unlock() even if the corresponding RCU
read-side critical section might have been preempted.  This commit also
updates RCU's requirements documentation.

This commit is inspired by a patch from Lai Jiangshan:
https://lore.kernel.org/lkml/20191102124559.1135-2-laijs@linux.alibaba.com
This commit is further intended to be a step towards his goal of permitting
the inlining of RCU-preempt's rcu_read_lock() and rcu_read_unlock().

Cc: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

This commit adds stubs for KCSAN's data_race(), ASSERT_EXCLUSIVE_WRITER(),
and ASSERT_EXCLUSIVE_ACCESS() macros to allow code using these macros
to move ahead.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

This commit adds stubs for KCSAN's data_race(), ASSERT_EXCLUSIVE_WRITER(),
and ASSERT_EXCLUSIVE_ACCESS() macros to allow code using these macros to
move ahead.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

When remapping a mapping where a portion of a VMA is remapped
into another portion of the VMA it can cause the VMA to become
split. During the copy_vma operation the VMA can actually
be remerged if it's an anonymous VMA whose pages have not yet
been faulted. This isn't normally a problem because at the end
of the remap the original portion is unmapped causing it to
become split again.

However, MREMAP_DONTUNMAP leaves that original portion in place which
means that the VMA which was split and then remerged is not actually
split at the end of the mremap. This patch fixes a bug where
we don't detect that the VMAs got remerged and we end up
putting back VM_ACCOUNT on the next mapping which is completely
unreleated. When that next mapping is unmapped it results in
incorrectly unaccounting for the memory which was never accounted,
and eventually we will underflow on the memory comittment.

There is also another issue which is similar, we're currently
accouting for the number of pages in the new_vma but that's wrong.
We need to account for the length of the remap operation as that's
all that is being added. If there was a mapping already at that
location its comittment would have been adjusted as part of
the munmap at the start of the mremap.

A really simple repro can be seen in:
https://gist.github.com/bgaff/e101ce99da7d9a8c60acc641d07f312c

Fixes: e346b381 ("mm/mremap: add MREMAP_DONTUNMAP to mremap()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Brian Geffon <bgeffon@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull clk fixes from Stephen Boyd:
 "Two build fixes for a couple clk drivers and a fix for the Unisoc
  serial clk where we want to keep it on for earlycon"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: sprd: don't gate uart console clock
  clk: mmp2: fix link error without mmp2
  clk: asm9260: fix __clk_hw_register_fixed_rate_with_accuracy typo

Pull x86 and objtool fixes from Thomas Gleixner:
 "A set of fixes for x86 and objtool:

  objtool:

   - Ignore the double UD2 which is emitted in BUG() when
     CONFIG_UBSAN_TRAP is enabled.

   - Support clang non-section symbols in objtool ORC dump

   - Fix switch table detection in .text.unlikely

   - Make the BP scratch register warning more robust.

  x86:

   - Increase microcode maximum patch size for AMD to cope with new CPUs
     which have a larger patch size.

   - Fix a crash in the resource control filesystem when the removal of
     the default resource group is attempted.

   - Preserve Code and Data Prioritization enabled state accross CPU
     hotplug.

   - Update split lock cpu matching to use the new X86_MATCH macros.

   - Change the split lock enumeration as Intel finaly decided that the
     IA32_CORE_CAPABILITIES bits are not architectural contrary to what
     the SDM claims. !@#%$^!

   - Add Tremont CPU models to the split lock detection cpu match.

   - Add a missing static attribute to make sparse happy"

* tag 'x86-urgent-2020-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/split_lock: Add Tremont family CPU models
  x86/split_lock: Bits in IA32_CORE_CAPABILITIES are not architectural
  x86/resctrl: Preserve CDP enable over CPU hotplug
  x86/resctrl: Fix invalid attempt at removing the default resource group
  x86/split_lock: Update to use X86_MATCH_INTEL_FAM6_MODEL()
  x86/umip: Make umip_insns static
  x86/microcode/AMD: Increase microcode PATCH_MAX_SIZE
  objtool: Make BP scratch register warning more robust
  objtool: Fix switch table detection in .text.unlikely
  objtool: Support Clang non-section symbols in ORC generation
  objtool: Support Clang non-section symbols in ORC dump
  objtool: Fix CONFIG_UBSAN_TRAP unreachable warnings

Pull time namespace fix from Thomas Gleixner:
 "An update for the proc interface of time namespaces: Use symbolic
  names instead of clockid numbers. The usability nuisance of numbers
  was noticed by Michael when polishing the man page"

* tag 'timers-urgent-2020-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  proc, time/namespace: Show clock symbolic names in /proc/pid/timens_offsets

Pull perf tooling fixes and updates from Thomas Gleixner:

 - Fix the header line of perf stat output for '--metric-only --per-socket'

 - Fix the python build with clang

 - The usual tools UAPI header synchronization

* tag 'perf-urgent-2020-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tools headers: Synchronize linux/bits.h with the kernel sources
  tools headers: Adopt verbatim copy of compiletime_assert() from kernel sources
  tools headers: Update x86's syscall_64.tbl with the kernel sources
  tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
  tools headers UAPI: Update tools's copy of drm.h headers
  tools headers kvm: Sync linux/kvm.h with the kernel sources
  tools headers UAPI: Sync linux/fscrypt.h with the kernel sources
  tools include UAPI: Sync linux/vhost.h with the kernel sources
  tools arch x86: Sync asm/cpufeatures.h with the kernel sources
  tools headers UAPI: Sync linux/mman.h with the kernel
  tools headers UAPI: Sync sched.h with the kernel
  tools headers: Update linux/vdso.h and grab a copy of vdso/const.h
  perf stat: Fix no metric header if --per-socket and --metric-only set
  perf python: Check if clang supports -fno-semantic-interposition
  tools arch x86: Sync the msr-index.h copy with the kernel sources