- 22 Jun, 2017 5 commits
-
-
Mario Kleiner authored
With instantaneous high precision vblank timestamping that updates at leading edge of vblank, the emulated "hw vblank counter" from vblank timestamping which increments at leading edge of vblank, and reliable page flip execution and completion at leading edge of vblank, we should meet the requirements for fast vblank irq disable/enable. Testing against rpi-4.12-rc5 Linux kernel with timing measurement equipment indicates this works fine, so allow immediate vblank disable for power saving. For debugging in case of unexpected trouble, booting with kernel cmdline option drm.vblankoffdelay=0 would keep vblank irqs on to approximate old behavior. v2: Respin onto drm-misc-next, per Eric's suggestion. Drop !vc4->firmware_kms check, as the firmware_kms implementation does not exist in upstream. Signed-off-by:Mario Kleiner <mario.kleiner.de@gmail.com> Cc: Eric Anholt <eric@anholt.net> Reviewed-by:
Eric Anholt <eric@anholt.net> Link: http://patchwork.freedesktop.org/patch/msgid/20170622012811.2139-1-mario.kleiner.de@gmail.com
-
Boris Brezillon authored
Add an helper to wait for all page flips of an atomic state to be done. v2: - Pimp kerneldoc as discussed with Boris on irc - Add missing doc for @dev. - Use old_state for consitency with wait_for_vblanks Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> (v1) Acked-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1496392332-8722-2-git-send-email-boris.brezillon@free-electrons.com
-
Jose Abreu authored
Now that we have a callback to check if crtc supports a given mode we can use it in arcpgu so that we restrict the number of probbed modes to the ones we can actually display. This is specially useful because arcpgu crtc is responsible to set a clock value in the commit() stage but unfortunatelly this clock does not support all the needed ranges. Also, remove the atomic_check() callback as mode_valid() callback will be called before. Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Reviewed-by:
Alexey Brodkin <abrodkin@synopsys.com> Cc: Carlos Palminha <palminha@synopsys.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@linux.ie> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Changes v4->v5: - Change commit message to "arcpgu" (Alexey) Changes v3->v4: - Do not use aux function (Laurent) Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Acked-by:
Dave Airlie <airlied@gmail.com> Signed-off-by:
-
Daniel Vetter authored
It again looks all cargo-culted for no good reasons. Cc: Shawn Guo <shawnguo@kernel.org> Acked-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170621082850.13224-13-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
It doesn't do anything in the driver load error paths that the drm core doesn't also do (cleanup is done in drm_dev_fini). Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
- 21 Jun, 2017 6 commits
-
-
Boris Brezillon authored
VBLANK events are missed when the CRTC is being disabled because the driver does not wait till the end of the frame before stopping the HVS and PV blocks. In this case, we should explicitly issue a VBLANK event if there's one waiting. Signed-off-by:
-
Daniel Vetter authored
I've failed to remember that we have virtual drivers like vgem which have no underlying struct device. Fix this asap. Reported-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Arvind Yadav authored
Undo preparation of a clock source, if sti_hqvdp_start_xp70 and sti_hqvdp_atomic_check are not successful. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: http://patchwork.freedesktop.org/patch/msgid/7afad3012fb6e40f43a1eb5a64dc6364c38bd052.1498039961.git.arvind.yadav.cs@gmail.com
-
Thierry Reding authored
The expression &private->fbdev_helper can never be NULL, so the check is completely unnecessary. Reviewed-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Thierry Reding authored
drm_fbdev_cma_hotplug_event() already checks for NULL pointers before dereferencing, so callers don't need to do that. Reviewed-by:
-
Arvind Yadav authored
of_device_ids are not supposed to change at runtime. All functions working with of_device_ids provided by <linux/of.h> work with const of_device_ids. So mark the non-const structs as const. File size before: text data bss dec hex filename 8836 744 0 9580 256c drivers/gpu/drm/armada/armada_crtc.o File size after constify armada_lcd_of_match: text data bss dec hex filename 9220 328 0 9548 254c drivers/gpu/drm/armada/armada_crtc.o Signed-off-by:
-
- 20 Jun, 2017 15 commits
-
-
Liviu Dudau authored
drm_fbdev_cma_set_suspend{,_unlocked} use an integer parameter to describe whether the intended state is a suspend or a resume. It then passes the value to drm_fb_helper_set_suspend{,_unlocked} which uses a boolean. Switch to using bool everywhere. Signed-off-by:Liviu Dudau <liviu.dudau@arm.com> Signed-off-by:
-
Arvind Yadav authored
of_device_ids are not supposed to change at runtime. All functions working with of_device_ids provided by <linux/of.h> work with const of_device_ids. So mark the non-const structs as const. File size before: text data bss dec hex filename 15845 640 0 16485 4065 drivers/gpu/drm/sti/sti_hqvdp.o File size after constify hqvdp_of_match: text data bss dec hex filename 16229 224 0 16453 4045 drivers/gpu/drm/sti/sti_hqvdp.o Signed-off-by:
-
Arvind Yadav authored
of_device_ids are not supposed to change at runtime. All functions working with of_device_ids provided by <linux/of.h> work with const of_device_ids. So mark the non-const structs as const. File size before: text data bss dec hex filename 4222 664 0 4886 1316 drivers/gpu/drm/sti/sti_dvo.o File size after constify dvo_of_match: text data bss dec hex filename 4638 248 0 4886 1316 drivers/gpu/drm/sti/sti_dvo.o Signed-off-by:
-
Daniel Vetter authored
It's not obvious that when using the new color manager stuff you still need to wire up the legacy helper to get legacy LUT support. Improve this with more links. drm_crtc_funcs->gamma_set already explains this properly. Cc: Peter Rosin <peda@axentia.se> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by:
-
Jose Abreu authored
Now that we have a callback to check if crtc and encoder supports a given mode we can use it in vc4 so that we restrict the number of probed modes to the ones we can actually display. Also, remove the mode_fixup() calls as these are no longer needed because mode_valid() will be called before. Signed-off-by:
-
Daniel Vetter authored
I spotted a markup issue, plus adding the descriptions in drm_driver. Plus a few more links while at it. I'm still mildly unhappy with the split between fops and ioctls, but I still think having the ioctls in the uapi chapter makes more sense. Oh well ... v2: Rebase. v3: Move misplace hunk to the right patch. Cc: Stefan Agner <stefan@agner.ch> Acked-by:
-
Daniel Vetter authored
The magic switching between proper pci driver and shadow-attach isn't useful anymore since there's no ums+kms drivers left. Let's split this up properly, calling pci_register_driver for kms drivers and renaming the shadow-attach init to drm_legacy_pci_init/exit. Acked-by:
-
Daniel Vetter authored
The only special-case is pci devices, and we can easily handle this in the core. Do so and drop a pile of boilerplate from drivers. Acked-by:
-
Daniel Vetter authored
Since commit ca8e2ad7 Author: Thierry Reding <treding@nvidia.com> Date: Fri Apr 11 15:23:00 2014 +0200 drm: Introduce drm_dev_set_unique() the ->set_busid callback is optional. On top of that the udl one isn't really fully compliant with the drm uabi, but since only modesetting ever binds to it (there's no 3d accel on udl) it doesn't matter. Still, can't harm to aling and use the default used by everyone else. Acked-by:
-
Daniel Vetter authored
We use drm_crtc_ for all the new-style vblank functions which directly take a struct drm_crtc *. drm_accurate_vblank_count was the odd one out, correct this to appease my OCD. Acked-by:
-
Daniel Vetter authored
I alwasy get confused about drm_wait_vblank for a split second until I realize it's the ioctl handler. Unconfuse me, and do it for the legacy modeset vblank control ioctl too. While at it also noticed that I misplaced the irq ioctl handler in the internal header file. Acked-by:
-
Daniel Vetter authored
Unify and review everything, plus make sure it's all correct markup. Drop the kernel-doc for internal functions. Also rework the overview section, it's become rather outdated. Unfortuantely the kernel-doc in drm_driver isn't rendered yet, but that will change as soon as drm_driver is kernel-docified properly. Also document properly that drm_vblank_cleanup is optional, the core calls this already. v2: Make it clear that cleanup happens in drm_dev_fini for drivers with their own ->release callback (Thierry). Acked-by:
-
Daniel Vetter authored
I'm fed up staring at the error message from kernel-doc that it can't find anything. Acked-by:
-
Daniel Vetter authored
Again, doesn't seem to serve a purpose. Cc: Thierry Reding <thierry.reding@gmail.com> Acked-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
-
Daniel Vetter authored
Seems entirely cargo-culted. Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Acked-by:
Vincent Abriou <vincent.abriou@st.com> Signed-off-by:
-
- 15 Jun, 2017 6 commits
-
-
Boris Brezillon authored
The VC4 KMS driver is implementing its own ->atomic_commit() but there are a few generic helpers we can use instead of open-coding the logic. Signed-off-by:
-
Eric Anholt authored
This allows mesa to set the tiling format for a BO and have that tiling format be respected by mesa on the other side of an import/export (and by vc4 scanout in the kernel), without defining a protocol to pass the tiling through userspace. Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Eric Anholt authored
The T tiling format is what V3D uses for textures, with no raster support at all until later revisions of the hardware (and always at a large 3D performance penalty). If we can't scan out V3D's format, then we often need to do a relayout at some stage of the pipeline, either right before texturing from the scanout buffer (common in X11 without a compositor) or between a tiled screen buffer right before scanout (an option I've considered in trying to resolve this inconsistency, but which means needing to use the dirty fb ioctl and having some update policy). T-format scanout lets us avoid either of those shadow copies, for a massive, obvious performance improvement to X11 window dragging without a compositor. Unfortunately, enabling a compositor to work around the discrepancy has turned out to be too costly in memory consumption for the Raspbian distribution. Because the HVS operates a scanline at a time, compositing from T does increase the memory bandwidth cost of scanout. On my 1920x1080@32bpp display on a RPi3, we go from about 15% of system memory bandwidth with linear to about 20% with tiled. However, for X11 this still ends up being a huge performance win in active usage. This patch doesn't yet handle src_x/src_y offsetting within the tiled buffer. However, we fail to do so for untiled buffers already. Signed-off-by:
-
Dawid Kurek authored
Smaller scope reduces visibility of variable and makes usage of uninitialized variable less possible. Changes in v2: - separate declaration and initialization Changes in v3: - add missing signed-off-by tag Signed-off-by:
Dawid Kurek <dawikur@gmail.com> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170615174556.GA8872@gmail.com
-
Fabio Estevam authored
According to the eLCDIF initialization steps listed in the MX6SX Reference Manual the eLCDIF block reset is mandatory. Without performing the eLCDIF reset the display shows garbage content when the kernel boots. In earlier tests this issue has not been observed because the bootloader was previously showing a splash screen and the bootloader display driver does properly implement the eLCDIF reset. Add the eLCDIF reset to the driver, so that it can operate correctly independently of the bootloader. Tested on a imx6sx-sdb board. Cc: <stable@vger.kernel.org> Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by:
Marek Vasut <marex@denx.de> Signed-off-by:
-
Dawid Kurek authored
Forward declarations in C are great but I'm pretty sure one is enough. Signed-off-by:
-
- 14 Jun, 2017 8 commits
-
-
Hoegeun Kwon authored
This patch supports TM2e panel and the panel has 1600x2560 resolution in 5.65" physical. This identify panel type with compatibility string, also invoke display mode that matches the type. So add the check code for s6e3ha2 compatibility and s6e3hf2 type and select the drm_display_mode of default and edge type. Signed-off-by:
Hoegeun Kwon <hoegeun.kwon@samsung.com> Reviewed-by:
Andrzej Hajda <a.hajda@samsung.com> Reviewed-by:
Inki Dae <inki.dae@samsung.com> [treding@nvidia.com: fixup checkpatch warnings] Signed-off-by:
-
Hoegeun Kwon authored
The samsung s6e3hf2 panel is a 5.65" 1600x2560 AMOLED panel connected using MIPI-DSI interfaces. The s6e3hf2 is add to samsung,s6e3ha2.txt binding because it is a panel similar to the s6e3ha2. So add the compatible string and comments. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
Without the dependency, we run into a link error: drivers/gpu/drm/panel/panel-sitronix-st7789v.o: In function `st7789v_probe': panel-sitronix-st7789v.c:(.text.st7789v_probe+0xc0): undefined reference to `of_find_backlight_by_node' Fixes: 7142afb3 ("drm/panel: Add driver for sitronix ST7789V LCD controller") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
Arnd Bergmann authored
The new S6E3HA2 driver fails to link when backlight is disabled: ERROR: "backlight_device_register" [drivers/gpu/drm/panel/panel-samsung-s6e3ha2.ko] undefined! ERROR: "backlight_device_unregister" [drivers/gpu/drm/panel/panel-samsung-s6e3ha2.ko] undefined! This adds a Kconfig dependency like we have it for some other panel drivers. Fixes: ed29f942 ("drm/panel: Add support for S6E3HA2 panel driver on TM2 board") Signed-off-by:
-
Lucas Stach authored
This adds support for the AU Optronics Corporation 31.5" FHD (1920x1080) LVDS TFT LCD panel, which can be supported by the simple panel driver Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Acked-by:
-
Lucas Stach authored
This adds support for the NLT Technologies NL192108AC18-02D 15.6" LVDS FullHD TFT LCD panel, which can be supported by the simple panel driver. Timings are taken from the preliminary datasheet, as a final one is not yet available. Signed-off-by:
-
Lucas Stach authored
NLT technologies is the former NEC display business, but changed its name to NLT Technologies when forming a joint venture with Shenzhen AVIC OPTOELECTRONICS, Ltd. Signed-off-by:
-
Lucas Stach authored
This adds support for the NEC LCD Technologies, Ltd. 12.1" WXGA (1280x800) LVDS TFT LCD panel, which can be supported by the simple panel driver. Signed-off-by:
-
