- 20 Nov, 2014 40 commits
-
-
Stephen M. Cameron authored
Fix a couple of pci id table mistakes: Subdevice ID 0x3323 missing from product[] table (another name for HP Smart Storage 1210m) Bogus 0x1925 subdevice id removed from hpsa_pci_device_id[] (no such thing.) Signed-off-by:
Don Brace <don.brace@pmcs.com> Reviewed-by:
Webb Scales <webbnh@hp.com> Signed-off-by:
Christoph Hellwig <hch@lst.de>
-
Robert Elliott authored
RAID-1ADM is unusable with dev_warn called on every command. Signed-off-by:
Robert Elliott <elliott@hp.com> Signed-off-by:
Stephen M. Cameron <stephenmcameron@gmail.com> Reviewed-by:
-
Don Brace authored
Clean up issues reported when running sparse. Signed-off-by:
Webb Scales <webb.scales@hp.com> Signed-off-by:
-
Finn Thain authored
Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
-
Finn Thain authored
There's no need to run the cmd->done callback for aborted commands. Remove the old EH code and the RESET_RUN_DONE macro. Signed-off-by:
Hannes Reinecke <hare@suse.de> Tested-by:
Michael Schmitz <schmitzmic@gmail.com> Signed-off-by:
-
Finn Thain authored
Unlike NCR5380.c, the atari_NCR5380.c core driver is limited to a single instance because co-routine state is stored globally. Fix this by removing the static scsi host pointer. For the co-routine, obtain this pointer from the work_struct pointer instead. For the interrupt handler, obtain it from the dev_id argument. Signed-off-by:
-
Finn Thain authored
The atari_NCR5380.c core driver keeps some per-host data in a static variable which limits the driver to a single instance. Fix this by moving TagAlloc to the hostdata struct. Signed-off-by:
-
Finn Thain authored
The static variable setup_use_tagged_queuing is declared in mac_scsi.c, sun3_scsi.c and atari_scsi.c and doesn't belong in the core driver. None of the other NCR5380 drivers suffer from this layering issue which makes merging the core drivers more difficult and will likely hinder plans for future use of platform data to configure the driver. Replace the static variable with a host flag. This way it can be reported along with the other flags. Signed-off-by:
-
Finn Thain authored
The NCR5380.c core driver has moved on since the atari_NCR5380.c fork. Some of those changes are also relevant to atari_NCR5380.c so apply them there as well. Signed-off-by:
-
Finn Thain authored
Given the preceding changes to atari_NCR5380.c, this patch should not change behaviour of the sun3_scsi and sun3_scsi_vme modules. Signed-off-by:
-
Finn Thain authored
There is very little difference between the sun3_NCR5380.c core driver and atari_NCR5380.c. The former is a fork of the latter. Merge the sun3_NCR5380.c core driver into atari_NCR5380.c so that sun3_scsi.c can adopt the latter and the former can be deleted. Signed-off-by:
-
Finn Thain authored
Simplify falcon_release_lock_if_possible() by making callers responsible for disabling local IRQ's, which they must do anyway to correctly synchronize the ST DMA "lock" with core driver data structures. Move this synchronization logic to the core driver with which it is tightly coupled. Other LLD's like sun3_scsi and mac_scsi that can make use of this core driver can just stub out the NCR5380_acquire_dma_irq() and NCR5380_release_dma_irq() calls so the compiler will eliminate the ST DMA code. Remove a redundant local_irq_save/restore pair (irq's are disabled for interrupt handlers these days). Revise the locking for atari_scsi_bus_reset(): use local_irq_save/restore() instead of atari_turnoff/turnon_irq(). There is no guarantee that atari_scsi still holds the ST DMA lock during EH, so atari_turnoff/turnon_irq() could end up dropping an IDE or floppy interrupt. Signed-off-by:
-
Finn Thain authored
Make the atari_NCR5380.c core driver usable by sun3_scsi, mac_scsi and others by moving some of the Falcon-specific code out of the core driver: !IS_A_TT, atari_read_overruns and falcon_dont_release. Replace these with hostdata variables and flags. FLAG_CHECK_LAST_BYTE_SENT is unused in atari_NCR5380.c so don't set it. Signed-off-by:
-
Finn Thain authored
atari_NCR5380.c enables its IRQ when it is already enabled. Sun3 doesn't use the ENABLE_IRQ/DISABLE_IRQ cruft. Remove it. Signed-off-by:
-
Finn Thain authored
The #defines in sun3_scsi.h are intended to influence subsequent #includes in sun3_scsi.c. IMHO, that's too convoluted. Move sun3_scsi.h macro definitions to sun3_scsi.c, consistent with other NCR5380 drivers. Omit the unused NCR5380_local_declare() and NCR5380_setup() macros. Signed-off-by:
-
Finn Thain authored
Convert sun3_scsi to platform device and eliminate scsi_register(). Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Finn Thain authored
The #defines in atari_scsi.h are intended to influence subsequent #includes in atari_scsi.c. IMHO, that's too convoluted. Remove atari_scsi.h by moving those macro definitions to atari_scsi.c, consistent with other NCR5380 drivers. Signed-off-by:
-
Finn Thain authored
Convert atari_scsi to platform device and eliminate scsi_register(). Validate __setup options later on so that module options are checked as well. Remove the comment about the scsi mid-layer disabling the host irq as it is no longer true (AFAICT). Also remove the obsolete slow interrupt stuff (IRQ_TYPE_SLOW == 0 anyway). Signed-off-by:
-
Finn Thain authored
Don't disable irqs when waiting for the ST DMA "lock"; its release may require an interrupt. Introduce stdma_try_lock() for use in soft irq context. atari_scsi now tells the SCSI mid-layer to defer queueing a command if the ST DMA lock is not available, as per Michael's patch: http://marc.info/?l=linux-m68k&m=139095335824863&w=2 The falcon_got_lock variable is race prone: we can't disable IRQs while waiting to acquire the lock, so after acquiring it there must be some interval during which falcon_got_lock remains false. Introduce stdma_is_locked_by() to replace falcon_got_lock. The falcon_got_lock tests in the EH handlers are incorrect these days. It can happen that an EH handler is called after a command completes normally. Remove these checks along with falcon_got_lock. Also remove the complicated and racy fairness wait queues. If fairness is an issue (when SCSI competes with IDE for the ST DMA interrupt), the solution is likely to be a lower value for host->can_queue. Signed-off-by:
-
Finn Thain authored
Convert mac_scsi to platform device and eliminate scsi_register(). Platform resources for chip registers now follow the documentation. This should fix issues with the Mac IIci (and possibly other models too). Signed-off-by:
-
Finn Thain authored
Fix whitespace, remove pointless volatile qualifiers and improve code style by use of INPUT_DATA_REG and OUTPUT_DATA_REG macros. Signed-off-by:
-
Finn Thain authored
Allow mac_scsi to be built as a module. Replace the old validation of __setup options with code that validates both module and __setup options. Signed-off-by:
-
Finn Thain authored
The #defines in mac_scsi.h are intended to influence subsequent #includes in mac_scsi.c. IMHO, that's too convoluted. Remove mac_scsi.h by moving those macro definitions to mac_scsi.c, consistent with other NCR5380 drivers. Signed-off-by:
-
Finn Thain authored
Testing shows that the Domex 3191D card never asserts its IRQ. Hence it is non-functional with Linux (worse, the EH bugs in the core driver are fatal but that's a problem for another patch). Perhaps the DT-536 chip needs special setup? I can't find documentation for it. The NetBSD driver uses polling apparently because of this issue. Set host->irq = NO_IRQ so the core driver will prevent targets from disconnecting. Don't request host->irq. Signed-off-by:
-
Finn Thain authored
Convert Scsi_Cmnd to struct scsi_cmnd and drop the #include "scsi.h". The sun3_NCR5380.c core driver already uses struct scsi_cmnd so converting the other core drivers reduces the diff which makes them easier to unify. Signed-off-by:
-
Finn Thain authored
The *_RELEASE macros don't tell me anything. In some cases the version in the macro contradicts the version in the comments. Anyway, the Linux kernel version is sufficient information. Remove these macros to improve readability. Signed-off-by:
-
Finn Thain authored
Compile-time override of scsi host defaults is pointless for drivers that provide module parameters and __setup options for that. Too many macros make the code hard to read so remove them. Signed-off-by:
-
Finn Thain authored
Static variables from dtc.c and pas16.c should not appear in the core NCR5380.c driver. Aside from being a layering issue this worsens the divergence between the three core driver variants (atari_NCR5380.c and sun3_NCR5380.c don't support PSEUDO_DMA) and it can mean multiple hosts share the same counters. Fix this by making the pseudo DMA spin counters in the core more generic. This also avoids the abuse of the {DTC,PAS16}_PUBLIC_RELEASE macros, so they can be removed. oak.c doesn't use PDMA and hence it doesn't use the counters and hence it needs no write_info() method. Remove it. Signed-off-by: -
Finn Thain authored
If the host->info() method is not set, then host->name is used by default. For atari_scsi, that is exactly the same text. So remove the redundant info() method. Keep sun3_scsi.c in line with atari_scsi. Some NCR5380 drivers return an empty string from the info() method (arm/cumana_1.c arm/oak.c mac_scsi.c) while other drivers use the default (dmx3191d dtc.c g_NCR5380.c pas16.c t128.c). Implement a common info() method to replace a lot of duplicated code which the various drivers use to announce the same information. This replaces most of the (deprecated) show_info() output and all of the NCR5380_print_info() output. This also eliminates a bunch of code in g_NCR5380 which just duplicates functionality in the core driver. Signed-off-by:
-
Finn Thain authored
The NCR5380_STATS option is only enabled by g_NCR5380 yet it adds clutter to all three core drivers. The atari_NCR5380.c and sun3_NCR5380.c core drivers have a slightly different implementation of the NCR5380_STATS option. Out of all ten NCR5380 drivers, only one of them (g_NCR5380) actually has the code to report on the collected stats. Aside from being unreadable, that code seems to be broken because there's no initialization of timebase. sun3_NCR5380.c and atari_NCR5380.c have the timebase initialization but lack the code to report the stats. Remove all of this code to improve readability and reduce divergence between the three core drivers. This patch and the next one completely eliminate the PRINTP and ANDP pre-processor abuse. Signed-off-by:
-
Finn Thain authored
Oak scsi doesn't use any IRQ, but it sets irq = IRQ_NONE rather than SCSI_IRQ_NONE. Problem is, the core NCR5380 driver expects SCSI_IRQ_NONE if it is to issue IDENTIFY commands that prevent target disconnection. And, as Geert points out, IRQ_NONE is part of enum irqreturn. Other drivers, when they can't get an IRQ or can't use one, will set host->irq = SCSI_IRQ_NONE (that is, 255). But when they exit they will attempt to free IRQ 255 which was never requested. Fix these bugs by using NO_IRQ in place of SCSI_IRQ_NONE and IRQ_NONE. That means IRQ 0 is no longer probed by ISA drivers but I don't think this matters. Setting IRQ = 255 for these ISA drivers is understood to mean no IRQ. This remains supported so as to avoid breaking existing ISA setups (which can be difficult to get working) and because existing documentation (SANE, TLDP etc) describes this usage for the ISA NCR5380 driver options. Signed-off-by:
-
Finn Thain authored
The LIMIT_TRANSFERSIZE, PSEUDO_DMA, PARITY and UNSAFE options are all documented in the core drivers where they are used. The same goes for the chip databook reference. Remove the duplicate comments. Signed-off-by:
-
Finn Thain authored
Every NCR5380 driver sets AUTOSENSE so it need not be optional (and the mid-layer expects it). Remove this redundant macro to improve readability. Signed-off-by:
-
Finn Thain authored
Both atari_NCR5380.c and sun3_NCR5380.c core drivers #undef TAG_NONE and then redefine it. But the original definition is unused because NCR5380.c lacks support for tagged queueing. So just define it once. The TAG_NEXT macro only appears in the arguments to NCR5380_select() calls. But that routine doesn't use its tag argument as the tag was already assigned in NCR5380_main(). So remove the unused argument and the macro. Signed-off-by:
-
Finn Thain authored
Make use of the host template static initializer instead of assigning handlers at run-time. Move __maybe_unused qualifiers from declarations to definitions. Move the atari_scsi_bus_reset() wrapper after the definition of NCR5380_bus_reset(). All of the host template handler prototypes are now redundant so remove them. The write_info() handler is only relevant to drivers using PSEUDO_DMA so this patch fixes the compiler warning in atari_NCR5380.c and sun3_NCR5380.c: CC drivers/scsi/atari_scsi.o drivers/scsi/NCR5380.h:329: warning: 'NCR5380_write_info' declared 'static' but never defined Signed-off-by:
-
Finn Thain authored
Add missing static qualifiers and remove the now pointless prototypes. The NCR5380_* prototypes are all declared in NCR5380.h and renamed using macros. Further declarations are redundant (some are completely unused). Remove them. Signed-off-by:
-
Finn Thain authored
Some macros are never evaluated (i.e. FOO, USLEEP, SCSI2 and USE_WRAPPER; and in some drivers, NCR5380_intr and NCR5380_proc_info). DRIVER_SETUP serves no purpose anymore. Remove these macro definitions. Signed-off-by:
-
Finn Thain authored
Some __setup() options mentioned in Documentation/scsi don't work because a few lines of code went missing sometime since Linux 2.4. Fix the options and thus fix some compiler warnings for both the non-modular case, CC drivers/scsi/dtc.o drivers/scsi/dtc.c:176:20: warning: 'dtc_setup' defined but not used [-Wunused-function] and the modular case, CC [M] drivers/scsi/pas16.o drivers/scsi/pas16.c:335:20: warning: 'pas16_setup' defined but not used [-Wunused-function] CC [M] drivers/scsi/t128.o drivers/scsi/t128.c:147:20: warning: 't128_setup' defined but not used [-Wunused-function] Signed-off-by: -
Finn Thain authored
Remove unused fields from hostdata structs declared with the NCR5380_implementation_fields macro. Signed-off-by:
-
Finn Thain authored
Having defined NDEBUG, and having set the console log level, I'd like to see some output. Don't use pr_debug(), it's annoying to have to define DEBUG as well. Signed-off-by:
-
