- 26 Sep, 2022 24 commits
-
-
Vladimir Oltean authored
The extra_args argument ($3) of isochron_recv_start is overwritten with uds ($2), if that argument exists. This is currently not a problem, because the only TSN selftest (ocelot/psfp.sh) omits remote sync so it does not specify to the receiver a UNIX domain socket for ptp4l. So $uds is currently an empty string. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Yang Yingliang authored
This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Fixes: bc93e19d ("net: ethernet: adi: Add ADIN1110 support") Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220922070438.586692-1-yangyingliang@huawei.comSigned-off-by:
-
Wei Yongjun authored
SPI devices use the spi_device_id for module autoloading even on systems using device tree, after commit 5fa6863b ("spi: Check we have a spi_device_id for each DT compatible"), kernel warns as follows since the spi_device_id is missing: SPI driver mse102x has no spi_device_id for vertexcom,mse1021 SPI driver mse102x has no spi_device_id for vertexcom,mse1022 Add spi_device_id entries to silence the warnings, and ensure driver module autoloading works. Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20220922065717.1448498-1-weiyongjun@huaweicloud.comSigned-off-by:
-
Wei Yongjun authored
In case of error, the function get_phy_device() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: bc93e19d ("net: ethernet: adi: Add ADIN1110 support") Signed-off-by:
-
Jakub Kicinski authored
Arun Ramadoss says: ==================== net: dsa: microchip: ksz9477: enable interrupt for internal phy link detection This patch series implements the common interrupt handling for ksz9477 based switches and lan937x. The ksz9477 and lan937x has similar interrupt registers except ksz9477 has 4 port based interrupts whereas lan937x has 6 interrupts. The patch moves the phy interrupt hanler implemented in lan937x_main.c to ksz_common.c, along with the mdio_register functionality. ==================== Link: https://lore.kernel.org/r/20220922071028.18012-1-arun.ramadoss@microchip.comSigned-off-by:
-
Arun Ramadoss authored
Config_intr and handle_interrupt are enabled for ksz9477 phy. It is similar to all other phys in the micrel phys. Signed-off-by:
Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Arun Ramadoss authored
The global port interrupt routines and individual ports interrupt routines has similar implementation except the mask & status register and number of nested irqs in them. The mask & status register and pointer to ksz_device is added to ksz_irq and uses the ksz_irq as irq_chip_data. Signed-off-by:
-
Arun Ramadoss authored
To support the phy link detection through interrupt method for ksz9477 based switch, the interrupt handling routines are moved from lan937x_main.c to ksz_common.c. The only changes made are functions names are prefixed with ksz_ instead of lan937x_. Signed-off-by:
-
Arun Ramadoss authored
Currently, if the mdio node is not present in the dts file then lan937x_mdio_register return -ENODEV and entire probing process fails. To make the mdio_register generic for all ksz series switches and to maintain back-compatibility with existing dts file, return -ENODEV is replaced with return 0. Signed-off-by:
-
Arun Ramadoss authored
In the lan937x_mdio_register function, phy interrupts are enabled irrespective of irq is enabled in the switch. Now, the check is added to enable the phy interrupt only if the irq is enabled in the switch. Signed-off-by:
-
Arun Ramadoss authored
Currently the number of port irqs is hard coded for the lan937x switch as 6. In order to make the generic interrupt handler for ksz switches, number of port irq supported by the switch is added to the ksz_chip_data. It is 4 for ksz9477, 2 for ksz9897 and 3 for ksz9567. Signed-off-by:
-
Vladimir Oltean authored
taprio_dev_notifier() subscribes to netdev state changes in order to determine whether interfaces which have a taprio root qdisc have changed their link speed, so the internal calculations can be adapted properly. The 'qdev' temporary variable serves no purpose, because we just use it only once, and can just as well use qdisc_dev(q->root) directly (or the "dev" that comes from the netdev notifier; this is because qdev is only interesting if it was the subject of the state change, _and_ its root qdisc belongs in the taprio list). The 'found' variable also doesn't really serve too much of a purpose either; we can just call taprio_set_picos_per_byte() within the loop, and exit immediately afterwards. Signed-off-by:
Vinicius Costa Gomes <vinicius.gomes@intel.com> Link: https://lore.kernel.org/r/20220923145921.3038904-1-vladimir.oltean@nxp.comSigned-off-by:
-
Jakub Kicinski authored
Gaosheng Cui says: ==================== Remove useless inline functions from net ==================== Link: https://lore.kernel.org/r/20220922083857.1430811-1-cuigaosheng1@huawei.comSigned-off-by:
-
Gaosheng Cui authored
All uses of dst_hold_and_use() have been removed since commit 1202cdd6 ("Remove DECnet support from kernel"), so remove it. Signed-off-by:
Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by:
-
Gaosheng Cui authored
All uses of sk_nulls_node_init() have been removed since commit dbca1596 ("ping: convert to RCU lookups, get rid of rwlock"), so remove it. Signed-off-by:
-
Gaosheng Cui authored
All uses of neigh_key_eq16() have been removed since commit 1202cdd6 ("Remove DECnet support from kernel"), so remove it. Signed-off-by:
-
Gaosheng Cui authored
Remove all the code about SFTR-V2 Register which have been deprecated since commit 77b7f83d ("mlxsw: Enable unified bridge model"). Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
-
Vladimir Oltean authored
As pointed out during review, currently the following set of commands crashes the kernel: $ ip netns add ns0 $ ip link set swp0 netns ns0 $ ip netns del ns0 WARNING: CPU: 1 PID: 27 at net/core/dev.c:10884 unregister_netdevice_many+0xaa4/0xaec Workqueue: netns cleanup_net pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : unregister_netdevice_many+0xaa4/0xaec lr : unregister_netdevice_many+0x700/0xaec Call trace: unregister_netdevice_many+0xaa4/0xaec default_device_exit_batch+0x294/0x340 ops_exit_list+0xac/0xc4 cleanup_net+0x2e4/0x544 process_one_work+0x4ec/0xb40 ---[ end trace 0000000000000000 ]--- unregister_netdevice: waiting for swp0 to become free. Usage count = 2 This is because since DSA user ports, since they started populating dev->rtnl_link_ops in the blamed commit, gained a different treatment from default_device_exit_net(), which thinks these interfaces can now be unregistered. They can't; so set netns_refund = true to restore the behavior prior to populating dev->rtnl_link_ops. Fixes: 95f510d0 ("net: dsa: allow the DSA master to be seen and changed through rtnetlink") Suggested-by:
-
Jesper Dangaard Brouer authored
During LPC2022 I meetup with my page_pool co-maintainer Ilias. When discussing page_pool code we realised/remembered certain optimizations had not been fully utilised. Since commit c07aea3e ("mm: add a signature in struct page") struct page have a direct pointer to the page_pool object this page was allocated from. Thus, with this info it is possible to skip the rhashtable_lookup to find the page_pool object in __xdp_return(). The rcu_read_lock can be removed as it was tied to xdp_mem_allocator. The page_pool object is still safe to access as it tracks inflight pages and (potentially) schedules final release from a work queue. Created a micro benchmark of XDP redirecting from mlx5 into veth with XDP_DROP bpf-prog on the peer veth device. This increased performance 6.5% from approx 8.45Mpps to 9Mpps corresponding to using 7 nanosec (27 cycles at 3.8GHz) less per packet. Suggested-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
Toke Høiland-Jørgensen <toke@redhat.com> Reviewed-by:
-
Anand Moon authored
Rockchip RV1126 has GMAC 10/100/1000M ethernet controller via RGMII and RMII interfaces are configured via M0 and M1 pinmux. This patch adds rv1126 support by adding delay lines of M0 and M1 simultaneously. Signed-off-by:
Sugar Zhang <sugar.zhang@rock-chips.com> Signed-off-by:
David Wu <david.wu@rock-chips.com> Signed-off-by:
Anand Moon <anand@edgeble.ai> Signed-off-by:
Jagan Teki <jagan@edgeble.ai> Link: https://lore.kernel.org/r/20220920140944.2535-2-anand@edgeble.aiSigned-off-by:
-
Anand Moon authored
Add compatible string for RV1126 gmac, and constrain it to be compatible with Synopsys dwmac 4.20a. Reviewed-by:
Heiko Stuebner <heiko@sntech.de> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Peilin Ye authored
Similar to udp_read_skb(), delete the unnecessary while loop in unix_read_skb() for readability. Since recv_actor() cannot return a value greater than skb->len (see sk_psock_verdict_recv()), remove the redundant check. Suggested-by:
Cong Wang <cong.wang@bytedance.com> Signed-off-by:
Peilin Ye <peilin.ye@bytedance.com> Link: https://lore.kernel.org/r/7009141683ad6cd3785daced3e4a80ba0eb773b5.1663909008.git.peilin.ye@bytedance.comSigned-off-by:
-
Peilin Ye authored
Delete the unnecessary while loop in udp_read_skb() for readability. Additionally, since recv_actor() cannot return a value greater than skb->len (see sk_psock_verdict_recv()), remove the redundant check. Suggested-by:
-
Sabrina Dubroca authored
Commit 0a28bfd4 added a metadata_dst to each tx_sc, but that's only allocated when macsec_add_dev has run, which happens after device registration. If the requested or computed SCI already exists, or if linking to the lower device fails, we will panic because metadata_dst_free can't handle NULL. Reproducer: ip link add link $lower type macsec ip link add link $lower type macsec Fixes: 0a28bfd4 ("net/macsec: Add MACsec skb_metadata_dst Tx Data path support") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Acked-by:
Raed Salem <raeds@nvidia.com> Link: https://lore.kernel.org/r/60f2a1965fe553e2cade9472407d0fafff8de8ce.1663923580.git.sd@queasysnail.netSigned-off-by:
-
- 24 Sep, 2022 10 commits
-
-
Eric Dumazet authored
Blamed commit added a txhash parameter to tcp_v6_send_response() but forgot to update tcp_v6_send_reset() accordingly. Fixes: aa51b80e ("ipv6: tcp: send consistent autoflowlabel in SYN_RECV state") Signed-off-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20220922165036.1795862-1-eric.dumazet@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Alex Elder says: ==================== net: ipa: another set of cleanups This series contains another set of cleanups done in preparation for an upcoming series that reworks how IPA registers and their fields are defined. The first replaces the use of u32_replace_bits() with a simple logical AND operation in two places. The second creates a new function to encapsulate some common code, and renames another for consistency. The third restructures two other functions that do similar things to make their similarity more obvious. The fourth defines the flag bits in a register using an enumerated type. And the fifth updates "ipa_reg.h" so the values assigned to enumerated type members are aligned consistently. The last three encapsulate the code that assigns values to a few registers into separate functions. ==================== Link: https://lore.kernel.org/r/20220922222100.2543621-1-elder@linaro.orgSigned-off-by:
-
Alex Elder authored
Create a new function that encapsulates setting the BCR, TX_CFG, and CLKON_CFG register values during hardware configuration. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Alex Elder authored
Create a new function that encapsulates setting the counter configuration register value for versions prior to IPA v4.5. Create another small function to represent configuring hardware timing regardless of version. Signed-off-by:
-
Alex Elder authored
Create a new function that encapsulates setting the register flag that disables filter and routing table hashing for IPA v4.2. Signed-off-by:
-
Alex Elder authored
Update a few enumerated type definitions in "ipa_reg.h" so that the values assigned to each member align on the same column. Where a "TX" or "RX" (or both) comment is present, move that annotation into a separate comment between the member name and its value. Signed-off-by:
-
Alex Elder authored
The backward compatibility register (BCR) has a set of bit flags that indicate ways in which the IPA hardware should operate in a backward compatible way. The register is not supported starting with IPA v4.5, and where it is supported, defined bits all have the same numeric value. Redefine these flags using an enumerated type, with each member's value representing the bit position that encodes it in the BCR. This replaces all of the single-bit field masks previously defined. Signed-off-by:
-
Alex Elder authored
Both aggr_time_limit_encode() and hol_block_timer_encode() figure out how to encode a millisecond time value so it can be programmed into a register. Rearranging them a bit can make their similarity more obvious, with both taking essentially the same form. To do this: - Return 0 immediately in aggr_time_limit_encode() if the microseconds value supplied is zero. - Reverse the test at top of aggr_time_limit_encode(), so we compute and return the Qtime value in the "true" block, and compute the result the old way otherwise. - Open-code (and eliminate) hol_block_timer_qtime_encode() at the top of hol_block_timer_encode() in the case we use Qtimer. Signed-off-by: -
Alex Elder authored
Create a new function ipa_qtime_val() which returns a value that indicates what should be encoded for a register with a time field expressed using Qtime. Use it to factor out common code in aggr_time_limit_encoded() and hol_block_timer_qtime_val(). Rename aggr_time_limit_encoded() and hol_block_timer_qtime_val() so their names are both verbs ending in "encode". Rename the "limit" argument to the former to be "milliseconds" for consistency. Signed-off-by:
-
Alex Elder authored
In two spots we use u32_replace_bits() to replace a set of bits in a register while preserving the rest. Both of those cases just zero the bits being replaced, and this can be done more simply without using that function. Signed-off-by:
-
- 23 Sep, 2022 6 commits
-
-
Jakub Kicinski authored
Merge tag 'linux-can-next-for-6.1-20220923' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2022-09-23 The first 2 patches are by Ziyang Xuan and optimize registration and the sending in the CAN BCM protocol a bit. The next 8 patches target the gs_usb driver. 7 are by me and first fix the time hardware stamping support (added during this net-next cycle), rename a variable, convert the usb_control_msg + manual kmalloc()/kfree() to usb_control_msg_{send,rev}(), clean up the error handling and add switchable termination support. The patch by Rhett Aultman and Vasanth Sadhasivan convert the driver from usb_alloc_coherent()/usb_free_coherent() to kmalloc()/URB_FREE_BUFFER. The last patch is by Shang XiaoJing and removes an unneeded call to dev_err() from the ctucanfd driver. * tag 'linux-can-next-for-6.1-20220923' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: can: ctucanfd: Remove redundant dev_err call can: gs_usb: remove dma allocations can: gs_usb: add switchable termination support can: gs_usb: gs_make_candev(): clean up error handling can: gs_usb: convert from usb_control_msg() to usb_control_msg_{send,recv}() can: gs_usb: gs_cmd_reset(): rename variable holding struct gs_can pointer to dev can: gs_usb: gs_can_open(): initialize time counter before starting device can: gs_usb: add missing lock to protect struct timecounter::cycle_last can: gs_usb: gs_usb_get_timestamp(): fix endpoint parameter for usb_control_msg_recv() can: bcm: check the result of can_send() in bcm_can_tx() can: bcm: registration process optimization in bcm_module_init() ==================== Link: https://lore.kernel.org/r/20220923120859.740577-1-mkl@pengutronix.deSigned-off-by:
-
Jakub Kicinski authored
Antoine Tenart says: ==================== net: macsec: remove the preparation phase when offloading operations It was reported[1] the 2-step phase offloading of MACsec operations did not fit well and device drivers were mostly ignoring the first phase (preparation). In addition the s/w fallback in case h/w rejected an operation, which could have taken advantage of this design, never was implemented and it's probably not a good idea anyway (at least unconditionnally). So let's remove this logic which only makes the code more complex for no advantage, before there are too many drivers providing MACsec offloading. This series removes the first phase (preparation) of the MACsec h/w offloading. The modifications are split per-driver and in a way that makes bissection working with logical steps; but I can squash some patches if needed. This was tested on the MSCC PHY but not on the Altantic nor mlx5e NICs. [1] https://lore.kernel.org/all/166322893264.61080.12133865599607623050@kwain/T/ ==================== Link: https://lore.kernel.org/r/20220921135118.968595-1-atenart@kernel.orgSigned-off-by:
-
Antoine Tenart authored
Now that the MACsec offloading preparation phase was removed from the MACsec core implementation as well as from drivers implementing it, we can safely remove the flag representing it. Signed-off-by:
Antoine Tenart <atenart@kernel.org> Signed-off-by:
-
Antoine Tenart authored
Remove checks on the prepare phase as it is now unused by the MACsec core implementation. Signed-off-by:
-
Antoine Tenart authored
Remove checks on the prepare phase as it is now unused by the MACsec core implementation. Signed-off-by:
-
Antoine Tenart authored
Remove checks on the prepare phase as it is now unused by the MACsec core implementation. Signed-off-by:
-
