- 03 Jul, 2018 40 commits
-
-
Alex Estrin authored
commit 763b6965 upstream. The following error message occurs on a target host in a debug build during session login: [ 3524.411874] WARNING: CPU: 5 PID: 12063 at lib/dma-debug.c:1207 check_sync+0x4ec/0x5b0 [ 3524.421057] infiniband hfi1_0: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x0000000000000000] [size=76 bytes] ......snip ..... [ 3524.535846] CPU: 5 PID: 12063 Comm: iscsi_np Kdump: loaded Not tainted 3.10.0-862.el7.x86_64.debug #1 [ 3524.546764] Hardware name: Dell Inc. PowerEdge R430/03XKDV, BIOS 1.2.6 06/08/2015 [ 3524.555740] Call Trace: [ 3524.559102] [<ffffffffa5fe915b>] dump_stack+0x19/0x1b [ 3524.565477] [<ffffffffa58a2f58>] __warn+0xd8/0x100 [ 3524.571557] [<ffffffffa58a2fdf>] warn_slowpath_fmt+0x5f/0x80 [ 3524.578610] [<ffffffffa5bf5b8c>] check_sync+0x4ec/0x5b0 [ 3524.585177] [<ffffffffa58efc3f>] ? set_cpus_allowed_ptr+0x5f/0x1c0 [ 3524.592812] [<ffffffffa5bf5cd0>] debug_dma_sync_single_for_cpu+0x80/0x90 [ 3524.601029] [<ffffffffa586add3>] ? x2apic_send_IPI_mask+0x13/0x20 [ 3524.608574] [<ffffffffa585ee1b>] ? native_smp_send_reschedule+0x5b/0x80 [ 3524.616699] [<ffffffffa58e9b76>] ? resched_curr+0xf6/0x140 [ 3524.623567] [<ffffffffc0879af0>] isert_create_send_desc.isra.26+0xe0/0x110 [ib_isert] [ 3524.633060] [<ffffffffc087af95>] isert_put_login_tx+0x55/0x8b0 [ib_isert] [ 3524.641383] [<ffffffffa58ef114>] ? try_to_wake_up+0x1a4/0x430 [ 3524.648561] [<ffffffffc098cfed>] iscsi_target_do_tx_login_io+0xdd/0x230 [iscsi_target_mod] [ 3524.658557] [<ffffffffc098d827>] iscsi_target_do_login+0x1a7/0x600 [iscsi_target_mod] [ 3524.668084] [<ffffffffa59f9bc9>] ? kstrdup+0x49/0x60 [ 3524.674420] [<ffffffffc098e976>] iscsi_target_start_negotiation+0x56/0xc0 [iscsi_target_mod] [ 3524.684656] [<ffffffffc098c2ee>] __iscsi_target_login_thread+0x90e/0x1070 [iscsi_target_mod] [ 3524.694901] [<ffffffffc098ca50>] ? __iscsi_target_login_thread+0x1070/0x1070 [iscsi_target_mod] [ 3524.705446] [<ffffffffc098ca50>] ? __iscsi_target_login_thread+0x1070/0x1070 [iscsi_target_mod] [ 3524.715976] [<ffffffffc098ca78>] iscsi_target_login_thread+0x28/0x60 [iscsi_target_mod] [ 3524.725739] [<ffffffffa58d60ff>] kthread+0xef/0x100 [ 3524.732007] [<ffffffffa58d6010>] ? insert_kthread_work+0x80/0x80 [ 3524.739540] [<ffffffffa5fff1b7>] ret_from_fork_nospec_begin+0x21/0x21 [ 3524.747558] [<ffffffffa58d6010>] ? insert_kthread_work+0x80/0x80 [ 3524.755088] ---[ end trace 23f8bf9238bd1ed8 ]--- [ 3595.510822] iSCSI/iqn.1994-05.com.redhat:537fa56299: Unsupported SCSI Opcode 0xa3, sending CHECK_CONDITION. The code calls dma_sync on login_tx_desc->dma_addr prior to initializing it with dma-mapped address. login_tx_desc is a part of iser_conn structure and is used only once during login negotiation, so the issue is fixed by eliminating dma_sync call for this buffer using a special case routine. Cc: <stable@vger.kernel.org> Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by:
Don Dutile <ddutile@redhat.com> Signed-off-by:
Alex Estrin <alex.estrin@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Erez Shitrit authored
commit 7b74a83c upstream. On fatal error the driver simulates CQE's for ULPs that rely on completion of all their posted work-request. For the GSI traffic, the mlx5 has its own mechanism that sends the completions via software CQE's directly to the relevant CQ. This should be kept in fatal error too, so the driver should simulate such CQE's with the specified error state in order to complete GSI QP work requests. Without the fix the next deadlock might appears: schedule_timeout+0x274/0x350 wait_for_common+0xec/0x240 mcast_remove_one+0xd0/0x120 [ib_core] ib_unregister_device+0x12c/0x230 [ib_core] mlx5_ib_remove+0xc4/0x270 [mlx5_ib] mlx5_detach_device+0x184/0x1a0 [mlx5_core] mlx5_unload_one+0x308/0x340 [mlx5_core] mlx5_pci_err_detected+0x74/0xe0 [mlx5_core] Cc: <stable@vger.kernel.org> # 4.7 Fixes: 89ea94a7 ("IB/mlx5: Reset flow support for IB kernel ULPs") Signed-off-by:
Erez Shitrit <erezsh@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Jack Morgenstein authored
commit 08bb558a upstream. Make the MR writability flags check, which is performed in umem.c, a static inline function in file ib_verbs.h This allows the function to be used by low-level infiniband drivers. Cc: <stable@vger.kernel.org> Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
-
Jack Morgenstein authored
commit d8f9cc32 upstream. To allow rereg_user_mr to modify the MR from read-only to writable without using get_user_pages again, we needed to define the initial MR as writable. However, this was originally done unconditionally, without taking into account the writability of the underlying virtual memory. As a result, any attempt to register a read-only MR over read-only virtual memory failed. To fix this, do not add the writable flag bit when the user virtual memory is not writable (e.g. const memory). However, when the underlying memory is NOT writable (and we therefore do not define the initial MR as writable), the IB core adds a "force writable" flag to its user-pages request. If this succeeds, the reg_user_mr caller gets a writable copy of the original pages. If the user-space caller then does a rereg_user_mr operation to enable writability, this will succeed. This should not be allowed, since the original virtual memory was not writable. Cc: <stable@vger.kernel.org> Fixes: 9376932d ("IB/mlx4_ib: Add support for user MR re-registration") Signed-off-by:
-
Alex Estrin authored
commit 8d3e7113 upstream. A warm restart will fail to unload the driver, leaving link state potentially flapping up to the point the BIOS resets the adapter. Correct the issue by hooking the shutdown pci method, which will bring port down. Cc: <stable@vger.kernel.org> # 4.9.x Reviewed-by:
-
Mike Marciniszyn authored
commit 0252f733 upstream. The following error occurs in a debug build when running MPI PSM: [ 307.415911] WARNING: CPU: 4 PID: 23867 at lib/dma-debug.c:1158 check_unmap+0x4ee/0xa20 [ 307.455661] ib_qib 0000:05:00.0: DMA-API: device driver failed to check map error[device address=0x00000000df82b000] [size=4096 bytes] [mapped as page] [ 307.517494] Modules linked in: [ 307.531584] ib_isert iscsi_target_mod ib_srpt target_core_mod rpcrdma sunrpc ib_srp scsi_transport_srp scsi_tgt ib_iser libiscsi ib_ipoib scsi_transport_iscsi rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ib_qib intel_powerclamp coretemp rdmavt intel_rapl iosf_mbi kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel ipmi_ssif ib_core aesni_intel sg ipmi_si lrw gf128mul dca glue_helper ipmi_devintf iTCO_wdt gpio_ich hpwdt iTCO_vendor_support ablk_helper hpilo acpi_power_meter cryptd ipmi_msghandler ie31200_edac shpchp pcc_cpufreq lpc_ich pcspkr ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm ahci crct10dif_pclmul crct10dif_common drm crc32c_intel libahci tg3 libata serio_raw ptp i2c_core [ 307.846113] pps_core dm_mirror dm_region_hash dm_log dm_mod [ 307.866505] CPU: 4 PID: 23867 Comm: mpitests-IMB-MP Kdump: loaded Not tainted 3.10.0-862.el7.x86_64.debug #1 [ 307.911178] Hardware name: HP ProLiant DL320e Gen8, BIOS J05 11/09/2013 [ 307.944206] Call Trace: [ 307.956973] [<ffffffffbd9e915b>] dump_stack+0x19/0x1b [ 307.982201] [<ffffffffbd2a2f58>] __warn+0xd8/0x100 [ 308.005999] [<ffffffffbd2a2fdf>] warn_slowpath_fmt+0x5f/0x80 [ 308.034260] [<ffffffffbd5f667e>] check_unmap+0x4ee/0xa20 [ 308.060801] [<ffffffffbd41acaa>] ? page_add_file_rmap+0x2a/0x1d0 [ 308.090689] [<ffffffffbd5f6c4d>] debug_dma_unmap_page+0x9d/0xb0 [ 308.120155] [<ffffffffbd4082e0>] ? might_fault+0xa0/0xb0 [ 308.146656] [<ffffffffc07761a5>] qib_tid_free.isra.14+0x215/0x2a0 [ib_qib] [ 308.180739] [<ffffffffc0776bf4>] qib_write+0x894/0x1280 [ib_qib] [ 308.210733] [<ffffffffbd540b00>] ? __inode_security_revalidate+0x70/0x80 [ 308.244837] [<ffffffffbd53c2b7>] ? security_file_permission+0x27/0xb0 [ 308.266025] qib_ib0.8006: multicast join failed for ff12:401b:8006:0000:0000:0000:ffff:ffff, status -22 [ 308.323421] [<ffffffffbd46f5d3>] vfs_write+0xc3/0x1f0 [ 308.347077] [<ffffffffbd492a5c>] ? fget_light+0xfc/0x510 [ 308.372533] [<ffffffffbd47045a>] SyS_write+0x8a/0x100 [ 308.396456] [<ffffffffbd9ff355>] system_call_fastpath+0x1c/0x21 The code calls a qib_map_page() which has never correctly tested for a mapping error. Fix by testing for pci_dma_mapping_error() in all cases and properly handling the failure in the caller. Additionally, streamline qib_map_page() arguments to satisfy just the single caller. Cc: <stable@vger.kernel.org> Reviewed-by:
-
Tadeusz Struk authored
commit 3ab2011e upstream. There is a race condition in tpm_common_write function allowing two threads on the same /dev/tpm<N>, or two different applications on the same /dev/tpmrm<N> to overwrite each other commands/responses. Fixed this by taking the priv->buffer_mutex early in the function. Also converted the priv->data_pending from atomic to a regular size_t type. There is no need for it to be atomic since it is only touched under the protection of the priv->buffer_mutex. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by:
Tadeusz Struk <tadeusz.struk@intel.com> Reviewed-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
-
Tadeusz Struk authored
commit 8c81c247 upstream. If load context command returns with TPM2_RC_HANDLE or TPM2_RC_REFERENCE_H0 then we have use after free in line 114 and double free in 117. Fixes: 4d57856a ("tpm2: add session handle context saving and restoring to the space code") Cc: stable@vger.kernel.org Signed-off-by:
-
Srinivas Kandagatla authored
commit 522811e9 upstream. Immediately after the platform_device_unregister() the device will be cleaned up. Accessing the freed pointer immediately after that will crash the system. Found this bug when kernel is built with CONFIG_PAGE_POISONING and testing loading/unloading audio drivers in a loop on Qcom platforms. Fix this by moving of_node_clear_flag() just before the unregister calls. Below is the crash trace: Unable to handle kernel paging request at virtual address 6b6b6b6b6b6c03 Mem abort info: ESR = 0x96000021 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000021 CM = 0, WnR = 0 [006b6b6b6b6b6c03] address between user and kernel address ranges Internal error: Oops: 96000021 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 1784 Comm: sh Tainted: G W 4.17.0-rc7-02230-ge3a63a7ef641-dirty #204 Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) pstate: 80000005 (Nzcv daif -PAN -UAO) pc : clear_bit+0x18/0x2c lr : of_platform_device_destroy+0x64/0xb8 sp : ffff00000c9c3930 x29: ffff00000c9c3930 x28: ffff80003d39b200 x27: ffff000008bb1000 x26: 0000000000000040 x25: 0000000000000124 x24: ffff80003a9a3080 x23: 0000000000000060 x22: ffff00000939f518 x21: ffff80003aa79e98 x20: ffff80003aa3dae0 x19: ffff80003aa3c890 x18: ffff800009feb794 x17: 0000000000000000 x16: 0000000000000000 x15: ffff800009feb790 x14: 0000000000000000 x13: ffff80003a058778 x12: ffff80003a058728 x11: ffff80003a058750 x10: 0000000000000000 x9 : 0000000000000006 x8 : ffff80003a825988 x7 : bbbbbbbbbbbbbbbb x6 : 0000000000000001 x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000008 x2 : 0000000000000001 x1 : 6b6b6b6b6b6b6c03 x0 : 0000000000000000 Process sh (pid: 1784, stack limit = 0x (ptrval)) Call trace: clear_bit+0x18/0x2c q6afe_remove+0x20/0x38 apr_device_remove+0x30/0x70 device_release_driver_internal+0x170/0x208 device_release_driver+0x14/0x20 bus_remove_device+0xcc/0x150 device_del+0x10c/0x310 device_unregister+0x1c/0x70 apr_remove_device+0xc/0x18 device_for_each_child+0x50/0x80 apr_remove+0x18/0x20 rpmsg_dev_remove+0x38/0x68 device_release_driver_internal+0x170/0x208 device_release_driver+0x14/0x20 bus_remove_device+0xcc/0x150 device_del+0x10c/0x310 device_unregister+0x1c/0x70 qcom_smd_remove_device+0xc/0x18 device_for_each_child+0x50/0x80 qcom_smd_unregister_edge+0x3c/0x70 smd_subdev_remove+0x18/0x28 rproc_stop+0x48/0xd8 rproc_shutdown+0x60/0xe8 state_store+0xbc/0xf8 dev_attr_store+0x18/0x28 sysfs_kf_write+0x3c/0x50 kernfs_fop_write+0x118/0x1e0 __vfs_write+0x18/0x110 vfs_write+0xa4/0x1a8 ksys_write+0x48/0xb0 sys_write+0xc/0x18 el0_svc_naked+0x30/0x34 Code: d2800022 8b400c21 f9800031 9ac32043 (c85f7c22) ---[ end trace 32020935775616a2 ]--- Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: stable@vger.kernel.org Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Stefan M Schaeckeler authored
commit 3b9cf790 upstream. For strings, account for trailing \0 in property length field: This is consistent with how dtc builds string properties. Function __of_prop_dup() would misbehave on such properties as it duplicates properties based on the property length field creating new string values without trailing \0s. Signed-off-by:
Stefan M Schaeckeler <sschaeck@cisco.com> Reviewed-by:
Frank Rowand <frank.rowand@sony.com> Tested-by:
-
Frank Rowand authored
commit 482137bf upstream. The smatch static checker marks the data in offset as untrusted, leading it to warn: drivers/of/resolver.c:125 update_usages_of_a_phandle_reference() error: buffer underflow 'prop->value' 's32min-s32max' Add check to verify that offset is within the property data. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Jerome Brunet authored
commit d5b4885b upstream. There is a problem with the sd-uhs mode when doing a soft reboot. Switching back from 1.8v to 3.3v messes with the card, which no longer respond (timeout errors). According to the specification, we should perform a card reset (power cycling the card) but this is something we cannot control on this design. Then the only solution to restore the communication with the card is an "unplug-plug" which is not acceptable Until we find a solution, if any, disable the sd-uhs modes on this design. For the people using uhs at the moment, there will a performance drop as a result. Fixes: 3cde63eb ("ARM64: dts: meson-gxl: libretech-cc: enable high speed modes") Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Cc: stable@vger.kernel.org Signed-off-by:
Kevin Hilman <khilman@baylibre.com> Signed-off-by:
-
Will Deacon authored
commit 71c8fc0c upstream. When rewriting swapper using nG mappings, we must performance cache maintenance around each page table access in order to avoid coherency problems with the host's cacheable alias under KVM. To ensure correct ordering of the maintenance with respect to Device memory accesses made with the Stage-1 MMU disabled, DMBs need to be added between the maintenance and the corresponding memory access. This patch adds a missing DMB between writing a new page table entry and performing a clean+invalidate on the same line. Fixes: f992b4df ("arm64: kpti: Add ->enable callback to remap swapper using nG mappings") Cc: <stable@vger.kernel.org> # 4.16.x- Acked-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Will Deacon authored
commit b5b7dd64 upstream. We inspect __kpti_forced early on as part of the cpufeature enable callback which remaps the swapper page table using non-global entries. Ensure that __kpti_forced has been updated to reflect the kpti= command-line option before we start using it. Fixes: ea1e3de8 ("arm64: entry: Add fake CPU feature for unmapping the kernel at EL0") Cc: <stable@vger.kernel.org> # 4.16.x- Reported-by:
Wei Xu <xuwei5@hisilicon.com> Tested-by:
Sudeep Holla <sudeep.holla@arm.com> Tested-by:
-
Dave Martin authored
commit 0fe42512 upstream. Commit 17c28958 ("arm64: Abstract syscallno manipulation") abstracts out the pt_regs.syscallno value for a syscall cancelled by a tracer as NO_SYSCALL, and provides helpers to set and check for this condition. However, the way this was implemented has the unintended side-effect of disabling part of the syscall restart logic. This comes about because the second in_syscall() check in do_signal() re-evaluates the "in a syscall" condition based on the updated pt_regs instead of the original pt_regs. forget_syscall() is explicitly called prior to the second check in order to prevent restart logic in the ret_to_user path being spuriously triggered, which means that the second in_syscall() check always yields false. This triggers a failure in tools/testing/selftests/seccomp/seccomp_bpf.c, when using ptrace to suppress a signal that interrups a nanosleep() syscall. Misbehaviour of this type is only expected in the case where a tracer suppresses a signal and the target process is either being single-stepped or the interrupted syscall attempts to restart via -ERESTARTBLOCK. This patch restores the old behaviour by performing the in_syscall() check only once at the start of the function. Fixes: 17c28958 ("arm64: Abstract syscallno manipulation") Signed-off-by:
Dave Martin <Dave.Martin@arm.com> Reported-by:
Sumit Semwal <sumit.semwal@linaro.org> Cc: Will Deacon <will.deacon@arm.com> Cc: <stable@vger.kernel.org> # 4.14.x- Signed-off-by:
-
Dinh Nguyen authored
commit 3877ef7a upstream. The NAND compatible "denali,denal-nand-dt" property has never been used and is obsolete. Remove it. Cc: stable@vger.kernel.org Fixes: f549af06("ARM: dts: socfpga: Add NAND device tree for Arria10") Signed-off-by:
Dinh Nguyen <dinguyen@kernel.org> Signed-off-by:
-
Marek Vasut authored
commit 4eda9b76 upstream. The Denali NAND x-clock should be supplied by nand_x_clk, not by nand_clk. Fix this, otherwise the Denali driver gets incorrect clock frequency information and incorrectly configures the NAND timing. Cc: stable@vger.kernel.org Signed-off-by:
Marek Vasut <marex@denx.de> Fixes: d837a80d ("ARM: dts: socfpga: add nand controller nodes") Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by:
-
Marek Vasut authored
commit d9a695f3 upstream. The compatible string for the Denali NAND controller is incorrect, fix it by replacing it with one matching the DT bindings and the driver. Cc: stable@vger.kernel.org Signed-off-by:
-
Thor Thayer authored
commit 975ba94c upstream. Remove the unused bus-num node and change num-chipselect to num-cs to match SPI bindings. Cc: stable@vger.kernel.org Fixes: f2d6f8f8 ("ARM: dts: socfpga: Add SPI Master1 for Arria10 SR chip") Signed-off-by:
Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
David Rivshin authored
commit 76ed0b80 upstream. NUMREGBYTES (which is used as the size for gdb_regs[]) is incorrectly based on DBG_MAX_REG_NUM instead of GDB_MAX_REGS. DBG_MAX_REG_NUM is the number of total registers, while GDB_MAX_REGS is the number of 'unsigned longs' it takes to serialize those registers. Since FP registers require 3 'unsigned longs' each, DBG_MAX_REG_NUM is smaller than GDB_MAX_REGS. This causes GDB 8.0 give the following error on connect: "Truncated register 19 in remote 'g' packet" This also causes the register serialization/deserialization logic to overflow gdb_regs[], overwriting whatever follows. Fixes: 834b2964 ("kgdb,arm: fix register dump") Cc: <stable@vger.kernel.org> # 2.6.37+ Signed-off-by:
David Rivshin <drivshin@allworx.com> Acked-by:
Rabin Vincent <rabin@rab.in> Tested-by:
Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Vaibhav Jain authored
commit b6c84ba2 upstream. Currently we see a kernel-oops reported on Power-9 while attaching a context to an AFU, with radix-mode and sysfs attr 'prefault_mode' set to anything other than 'none'. The backtrace of the oops is of this form: Unable to handle kernel paging request for data at address 0x00000080 Faulting instruction address: 0xc00800000bcf3b20 cpu 0x1: Vector: 300 (Data Access) at [c00000037f003800] pc: c00800000bcf3b20: cxl_load_segment+0x178/0x290 [cxl] lr: c00800000bcf39f0: cxl_load_segment+0x48/0x290 [cxl] sp: c00000037f003a80 msr: 9000000000009033 dar: 80 dsisr: 40000000 current = 0xc00000037f280000 paca = 0xc0000003ffffe600 softe: 3 irq_happened: 0x01 pid = 3529, comm = afp_no_int <snip> cxl_prefault+0xfc/0x248 [cxl] process_element_entry_psl9+0xd8/0x1a0 [cxl] cxl_attach_dedicated_process_psl9+0x44/0x130 [cxl] native_attach_process+0xc0/0x130 [cxl] afu_ioctl+0x3f4/0x5e0 [cxl] do_vfs_ioctl+0xdc/0x890 ksys_ioctl+0x68/0xf0 sys_ioctl+0x40/0xa0 system_call+0x58/0x6c The issue is caused as on Power-8 the AFU attr 'prefault_mode' was used to improve initial storage fault performance by prefaulting process segments. However on Power-9 with radix mode we don't have Storage-Segments that we can prefault. Also prefaulting process Pages will be too costly and fine-grained. Hence, since the prefaulting mechanism doesn't makes sense of radix-mode, this patch updates prefault_mode_store() to not allow any other value apart from CXL_PREFAULT_NONE when radix mode is enabled. Fixes: f24be42a ("cxl: Add psl9 specific code") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by:
Vaibhav Jain <vaibhav@linux.ibm.com> Acked-by:
Frederic Barrat <fbarrat@linux.vnet.ibm.com> Acked-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Finley Xiao authored
commit 9e59c5f6 upstream. Solve the pd could only ever turn off but never turn them on again, if the pd registers have the writemask bits. So far this affects the rk3328 only. Fixes: 79bb17ce ("soc: rockchip: power-domain: Support domain control in hiword-registers") Cc: stable@vger.kernel.org Signed-off-by:
Finley Xiao <finley.xiao@rock-chips.com> Signed-off-by:
Elaine Zhang <zhangqing@rock-chips.com> Reviewed-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Mahesh Salgaonkar authored
commit 722cde76 upstream. Unregister fadump on kexec down path otherwise the fadump registration in new kexec-ed kernel complains that fadump is already registered. This makes new kernel to continue using fadump registered by previous kernel which may lead to invalid vmcore generation. Hence this patch fixes this issue by un-registering fadump in fadump_cleanup() which is called during kexec path so that new kernel can register fadump with new valid values. Fixes: b500afff ("fadump: Invalidate registration and release reserved memory for general use.") Cc: stable@vger.kernel.org # v3.4+ Signed-off-by:
Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by:
-
Gautham R. Shenoy authored
commit 0a4ec6aa upstream. The commit 78eaa10f ("cpuidle: powernv/pseries: Auto-promotion of snooze to deeper idle state") introduced a timeout for the snooze idle state so that it could be eventually be promoted to a deeper idle state. The snooze timeout value is static and set to the target residency of the next idle state, which would train the cpuidle governor to pick the next idle state eventually. The unfortunate side-effect of this is that if the next idle state(s) is disabled, the CPU will forever remain in snooze, despite the fact that the system is completely idle, and other deeper idle states are available. This patch fixes the issue by dynamically setting the snooze timeout to the target residency of the next enabled state on the device. Before Patch: POWER8 : Only nap disabled. $ cpupower monitor sleep 30 sleep took 30.01297 seconds and exited with status 0 |Idle_Stats PKG |CORE|CPU | snoo | Nap | Fast 0| 8| 0| 96.41| 0.00| 0.00 0| 8| 1| 96.43| 0.00| 0.00 0| 8| 2| 96.47| 0.00| 0.00 0| 8| 3| 96.35| 0.00| 0.00 0| 8| 4| 96.37| 0.00| 0.00 0| 8| 5| 96.37| 0.00| 0.00 0| 8| 6| 96.47| 0.00| 0.00 0| 8| 7| 96.47| 0.00| 0.00 POWER9: Shallow states (stop0lite, stop1lite, stop2lite, stop0, stop1, stop2) disabled: $ cpupower monitor sleep 30 sleep took 30.05033 seconds and exited with status 0 |Idle_Stats PKG |CORE|CPU | snoo | stop | stop | stop | stop | stop | stop | stop | stop 0| 16| 0| 89.79| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00 0| 16| 1| 90.12| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00 0| 16| 2| 90.21| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00 0| 16| 3| 90.29| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00 After Patch: POWER8 : Only nap disabled. $ cpupower monitor sleep 30 sleep took 30.01200 seconds and exited with status 0 |Idle_Stats PKG |CORE|CPU | snoo | Nap | Fast 0| 8| 0| 16.58| 0.00| 77.21 0| 8| 1| 18.42| 0.00| 75.38 0| 8| 2| 4.70| 0.00| 94.09 0| 8| 3| 17.06| 0.00| 81.73 0| 8| 4| 3.06| 0.00| 95.73 0| 8| 5| 7.00| 0.00| 96.80 0| 8| 6| 1.00| 0.00| 98.79 0| 8| 7| 5.62| 0.00| 94.17 POWER9: Shallow states (stop0lite, stop1lite, stop2lite, stop0, stop1, stop2) disabled: $ cpupower monitor sleep 30 sleep took 30.02110 seconds and exited with status 0 |Idle_Stats PKG |CORE|CPU | snoo | stop | stop | stop | stop | stop | stop | stop | stop 0| 0| 0| 0.69| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 9.39| 89.70 0| 0| 1| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.05| 93.21 0| 0| 2| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 89.93 0| 0| 3| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 93.26 Fixes: 78eaa10f ("cpuidle: powernv/pseries: Auto-promotion of snooze to deeper idle state") Cc: stable@vger.kernel.org # v4.2+ Signed-off-by:
Gautham R. Shenoy <ego@linux.vnet.ibm.com> Reviewed-by:
Balbir Singh <bsingharora@gmail.com> Signed-off-by:
-
Akshay Adiga authored
commit ac9816dc upstream. Init all present cpus for deep states instead of "all possible" cpus. Init fails if a possible cpu is guarded. Resulting in making only non-deep states available for cpuidle/hotplug. Stewart says, this means that for single threaded workloads, if you guard out a CPU core you'll not get WoF (Workload Optimised Frequency), which means that performance goes down when you wouldn't expect it to. Fixes: 77b54e9f ("powernv/powerpc: Add winkle support for offline cpus") Cc: stable@vger.kernel.org # v3.19+ Signed-off-by:
Akshay Adiga <akshay.adiga@linux.vnet.ibm.com> Signed-off-by:
-
Haren Myneni authored
commit 75743649 upstream. NX can set the 3rd bit in CR register for XER[SO] (Summary overflow) which is not related to paste request. The current paste function returns failure for a successful request when this bit is set. So mask this bit and check the proper return status. Fixes: 2392c8c8 ("powerpc/powernv/vas: Define copy/paste interfaces") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by:
Haren Myneni <haren@us.ibm.com> Signed-off-by:
-
Alexey Kardashevskiy authored
commit 98fd72fe upstream. When IODA2 creates a PE, it creates an IOMMU table with it_ops::free set to pnv_ioda2_table_free() which calls pnv_pci_ioda2_table_free_pages(). Since iommu_tce_table_put() calls it_ops::free when the last reference to the table is released, explicit call to pnv_pci_ioda2_table_free_pages() is not needed so let's remove it. This should fix double free in the case of PCI hotuplug as pnv_pci_ioda2_table_free_pages() does not reset neither iommu_table::it_base nor ::it_size. This was not exposed by SRIOV as it uses different code path via pnv_pcibios_sriov_disable(). IODA1 does not inialize it_ops::free so it does not have this issue. Fixes: c5f7700b ("powerpc/powernv: Dynamically release PE") Cc: stable@vger.kernel.org # v4.8+ Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
-
Michael Neuling authored
commit cd6ef7ee upstream. Back when we first introduced the DAWR, in commit 4ae7ebe9 ("powerpc: Change hardware breakpoint to allow longer ranges"), we screwed up the constraint making it a 1024 byte boundary rather than a 512. This makes the check overly permissive. Fortunately GDB is the only real user and it always did they right thing, so we never noticed. This fixes the constraint to 512 bytes. Fixes: 4ae7ebe9 ("powerpc: Change hardware breakpoint to allow longer ranges") Cc: stable@vger.kernel.org # v3.9+ Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
-
Anju T Sudhakar authored
commit d2032678 upstream. Currently memory is allocated for core-imc based on cpu_present_mask, which has bit 'cpu' set iff cpu is populated. We use (cpu number / threads per core) as the array index to access the memory. Under some circumstances firmware marks a CPU as GUARDed CPU and boot the system, until cleared of errors, these CPU's are unavailable for all subsequent boots. GUARDed CPUs are possible but not present from linux view, so it blows a hole when we assume the max length of our allocation is driven by our max present cpus, where as one of the cpus might be online and be beyond the max present cpus, due to the hole. So (cpu number / threads per core) value bounds the array index and leads to memory overflow. Call trace observed during a guard test: Faulting instruction address: 0xc000000000149f1c cpu 0x69: Vector: 380 (Data Access Out of Range) at [c000003fea303420] pc:c000000000149f1c: prefetch_freepointer+0x14/0x30 lr:c00000000014e0f8: __kmalloc+0x1a8/0x1ac sp:c000003fea3036a0 msr:9000000000009033 dar:c9c54b2c91dbf6b7 current = 0xc000003fea2c0000 paca = 0xc00000000fddd880 softe: 3 irq_happened: 0x01 pid = 1, comm = swapper/104 Linux version 4.16.7-openpower1 (smc@smc-desktop) (gcc version 6.4.0 (Buildroot 2018.02.1-00006-ga8d1126)) #2 SMP Fri May 4 16:44:54 PDT 2018 enter ? for help call trace: __kmalloc+0x1a8/0x1ac (unreliable) init_imc_pmu+0x7f4/0xbf0 opal_imc_counters_probe+0x3fc/0x43c platform_drv_probe+0x48/0x80 driver_probe_device+0x22c/0x308 __driver_attach+0xa0/0xd8 bus_for_each_dev+0x88/0xb4 driver_attach+0x2c/0x40 bus_add_driver+0x1e8/0x228 driver_register+0xd0/0x114 __platform_driver_register+0x50/0x64 opal_imc_driver_init+0x24/0x38 do_one_initcall+0x150/0x15c kernel_init_freeable+0x250/0x254 kernel_init+0x1c/0x150 ret_from_kernel_thread+0x5c/0xc8 Allocating memory for core-imc based on cpu_possible_mask, which has bit 'cpu' set iff cpu is populatable, will fix this issue. Reported-by:
Pridhiviraj Paidipeddi <ppaidipe@linux.vnet.ibm.com> Signed-off-by:
Anju T Sudhakar <anju@linux.vnet.ibm.com> Reviewed-by:
-
Michael Neuling authored
commit 4f7c06e2 upstream. In commit e2a800be ("powerpc/hw_brk: Fix off by one error when validating DAWR region end") we fixed setting the DAWR end point to its max value via PPC_PTRACE_SETHWDEBUG. Unfortunately we broke PTRACE_SET_DEBUGREG when setting a 512 byte aligned breakpoint. PTRACE_SET_DEBUGREG currently sets the length of the breakpoint to zero (memset() in hw_breakpoint_init()). This worked with arch_validate_hwbkpt_settings() before the above patch was applied but is now broken if the breakpoint is 512byte aligned. This sets the length of the breakpoint to 8 bytes when using PTRACE_SET_DEBUGREG. Fixes: e2a800be ("powerpc/hw_brk: Fix off by one error when validating DAWR region end") Cc: stable@vger.kernel.org # v3.11+ Signed-off-by:
-
Aneesh Kumar K.V authored
commit 91d06971 upstream. Currently we do not have an isync, or any other context synchronizing instruction prior to the slbie/slbmte in _switch() that updates the SLB entry for the kernel stack. However that is not correct as outlined in the ISA. From Power ISA Version 3.0B, Book III, Chapter 11, page 1133: "Changing the contents of ... the contents of SLB entries ... can have the side effect of altering the context in which data addresses and instruction addresses are interpreted, and in which instructions are executed and data accesses are performed. ... These side effects need not occur in program order, and therefore may require explicit synchronization by software. ... The synchronizing instruction before the context-altering instruction ensures that all instructions up to and including that synchronizing instruction are fetched and executed in the context that existed before the alteration." And page 1136: "For data accesses, the context synchronizing instruction before the slbie, slbieg, slbia, slbmte, tlbie, or tlbiel instruction ensures that all preceding instructions that access data storage have completed to a point at which they have reported all exceptions they will cause." We're not aware of any bugs caused by this, but it should be fixed regardless. Add the missing isync when updating kernel stack SLB entry. Cc: stable@vger.kernel.org Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> [mpe: Flesh out change log with more ISA text & explanation] Signed-off-by:
-
Miklos Szeredi authored
commit 6becdb60 upstream. syzbot is reporting NULL pointer dereference at fuse_ctl_remove_conn() [1]. Since fc->ctl_ndents is incremented by fuse_ctl_add_conn() when new_inode() failed, fuse_ctl_remove_conn() reaches an inode-less dentry and tries to clear d_inode(dentry)->i_private field. Fix by only adding the dentry to the array after being fully set up. When tearing down the control directory, do d_invalidate() on it to get rid of any mounts that might have been added. [1] https://syzkaller.appspot.com/bug?id=f396d863067238959c91c0b7cfc10b163638cac6Reported-by:
syzbot <syzbot+32c236387d66c4516827@syzkaller.appspotmail.com> Fixes: bafa9654 ("[PATCH] fuse: add control filesystem") Cc: <stable@vger.kernel.org> # v2.6.18 Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Tetsuo Handa authored
commit 543b8f86 upstream. syzbot is reporting use-after-free at fuse_kill_sb_blk() [1]. Since sb->s_fs_info field is not cleared after fc was released by fuse_conn_put() when initialization failed, fuse_kill_sb_blk() finds already released fc and tries to hold the lock. Fix this by clearing sb->s_fs_info field after calling fuse_conn_put(). [1] https://syzkaller.appspot.com/bug?id=a07a680ed0a9290585ca424546860464dd9658dbSigned-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by:
syzbot <syzbot+ec3986119086fe4eec97@syzkaller.appspotmail.com> Fixes: 3b463ae0 ("fuse: invalidation reverse calls") Cc: John Muir <john@jmuir.com> Cc: Csaba Henk <csaba@gluster.com> Cc: Anand Avati <avati@redhat.com> Cc: <stable@vger.kernel.org> # v2.6.31 Signed-off-by:
-
Miklos Szeredi authored
commit df0e91d4 upstream. Fuse has an "atomic_o_trunc" mode, where userspace filesystem uses the O_TRUNC flag in the OPEN request to truncate the file atomically with the open. In this mode there's no need to send a SETATTR request to userspace after the open, so fuse_do_setattr() checks this mode and returns. But this misses the important step of truncating the pagecache. Add the missing parts of truncation to the ATTR_OPEN branch. Reported-by:
Chad Austin <chadaustin@fb.com> Fixes: 6ff958ed ("fuse: add atomic open+truncate support") Signed-off-by:
-
Tejun Heo authored
commit 8a301eb1 upstream. If a connection gets aborted while congested, FUSE can leave nr_wb_congested[] stuck until reboot causing wait_iff_congested() to wait spuriously which can lead to severe performance degradation. The leak is caused by gating congestion state clearing with fc->connected test in request_end(). This was added way back in 2009 by 26c36791 ("fuse: destroy bdi on umount"). While the commit description doesn't explain why the test was added, it most likely was to avoid dereferencing bdi after it got destroyed. Since then, bdi lifetime rules have changed many times and now we're always guaranteed to have access to the bdi while the superblock is alive (fc->sb). Drop fc->connected conditional to avoid leaking congestion states. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Joshua Miller <joshmiller@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: stable@vger.kernel.org # v2.6.29+ Acked-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Tetsuo Handa authored
commit 988a35f8 upstream. I noticed that there is a possibility that printk_safe_log_store() causes kernel oops because "args" parameter is passed to vsnprintf() again when atomic_cmpxchg() detected that we raced. Fix this by using va_copy(). Link: http://lkml.kernel.org/r/201805112002.GIF21216.OFVHFOMLJtQFSO@I-love.SAKURA.ne.jp Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: dvyukov@google.com Cc: syzkaller@googlegroups.com Cc: fengguang.wu@intel.com Cc: linux-kernel@vger.kernel.org Signed-off-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by:
Petr Mladek <pmladek@suse.com> Signed-off-by:
-
Amit Pundir authored
commit 7dc5fe08 upstream. AOSP use userspace firmware loader to load firmwares, which will return -EAGAIN in case qca/rampatch_00440302.bin is not found. Since there is no rampatch for dragonboard820c QCA controller revision, just make it work as is. CC: Loic Poulain <loic.poulain@linaro.org> CC: Nicolas Dechesne <nicolas.dechesne@linaro.org> CC: Marcel Holtmann <marcel@holtmann.org> CC: Johan Hedberg <johan.hedberg@gmail.com> CC: Stable <stable@vger.kernel.org> Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Corey Minyard authored
commit fe50a7d0 upstream. There was one place where the timeout value for an operation was not being set, if a capabilities request was done from idle. Move the timeout value setting to before where that change might be requested. IMHO the cause here is the invisible returns in the macros. Maybe that's a job for later, though. Reported-by:
Nordmark Claes <Claes.Nordmark@tieto.com> Signed-off-by:
Corey Minyard <cminyard@mvista.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Mikulas Patocka authored
commit 2026d357 upstream. The function __builtin_expect returns long type (see the gcc documentation), and so do macros likely and unlikely. Unfortunatelly, when CONFIG_PROFILE_ANNOTATED_BRANCHES is selected, the macros likely and unlikely expand to __branch_check__ and __branch_check__ truncates the long type to int. This unintended truncation may cause bugs in various kernel code (we found a bug in dm-writecache because of it), so it's better to fix __branch_check__ to return long. Link: http://lkml.kernel.org/r/alpine.LRH.2.02.1805300818140.24812@file01.intranet.prod.int.rdu2.redhat.com Cc: Ingo Molnar <mingo@redhat.com> Cc: stable@vger.kernel.org Fixes: 1f0d69a9 ("tracing: profile likely and unlikely annotations") Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Matthias Schiffer authored
commit 6fb86566 upstream. ftrace_graph_caller was never run after calling ftrace_trace_function, breaking the function graph tracer. Fix this, bringing it in line with the x86 implementation. While we're at it, also streamline the control flow of _mcount a bit to reduce the number of branches. This issue was reported before: https://www.linux-mips.org/archives/linux-mips/2014-11/msg00295.htmlSigned-off-by:
Matthias Schiffer <mschiffer@universe-factory.net> Tested-by:
Matt Redfearn <matt.redfearn@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/18929/Signed-off-by:
Paul Burton <paul.burton@mips.com> Cc: stable@vger.kernel.org # v3.17+ Signed-off-by:
-
