- 31 Mar, 2016 40 commits
-
-
John L. Hammond authored
Remove the definition of struct client_obd_lock and the functions client_obd_list_{init,lock,unlock,done}(). Use spinlock_t for the cl_{loi,lru}_list_lock members of struct client_obd and call spin_{lock,unlock}() directly. Signed-off-by:John L. Hammond <john.hammond@intel.com> Signed-off-by:
Oleg Drokin <green@linuxhacker.ru> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
John L. Hammond authored
In struct lmv_obd rename the init_mutex member to lmv_init_mutex. Remove the compat macros lmv_init_{lock,unlock}() and use mutex_{lock,unlock}(&lmv->lmv_init_mutex) instead. Signed-off-by:Bob Glossman <bob.glossman@intel.com> Reviewed-by:
James Simmons <uja.ornl@gmail.com> Reviewed-by:
Dmitry Eremin <dmitry.eremin@intel.com> Signed-off-by:
-
John L. Hammond authored
In struct ll_inode_info remove the struct ost_lvb lli_lvb member and replace it with obd_time lli_{a,m,c}time. Rename ll_merge_lvb() to ll_merge_attr(). Remove cl_merge_lvb() and replace calls to it with calls to ll_merge_attr(). Signed-off-by:Bobi Jam <bobijam@gmail.com> Reviewed-by:
Lai Siyao <lai.siyao@intel.com> Signed-off-by:
-
Jinshan Xiong authored
It used to check each page in the readahead window is covered by a lock underneath, now cpo_page_is_under_lock() provides @max_index to help decide the maximum ra window. @max_index can be modified by OSC to extend the maximum lock region, to align stripe boundary at LOV, and to make sure the readahead region at least covers read region at LLITE layer. After this is done, usually readahead code calls cpo_page_is_under_lock() for each stripe. Signed-off-by:
Jinshan Xiong <jinshan.xiong@intel.com> Reviewed-on: http://review.whamcloud.com/8523 Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3321Reviewed-by:
Andreas Dilger <andreas.dilger@intel.com> Signed-off-by:
-
Jinshan Xiong authored
>From now on, cl_page becomes one to one mapping of vmpage. Signed-off-by:
-
Jinshan Xiong authored
Use weigh_ast to decide if a lock covers any pages. In recovery, weigh_ast will be used to decide if a DLM read lock covers any locked pages, or it will be canceled instead being recovered. The problem with the original implementation is that it attached each osc_page to an osc_lock also changed lock state to add every pages for readahead. Signed-off-by:
-
Jinshan Xiong authored
in ll_write_end(), instead of adding the page into writeback cache directly, it will be held in a page list. After enough pages have been collected, issue them all with cio_commit_async(). Signed-off-by:
-
Jinshan Xiong authored
This change adds support for a single preallocated cl_env per CPU which can be used in circumstances where reschedule is not possible. Currently this interface is only used by the ll_releasepage function. Signed-off-by:
Prakash Surya <surya1@llnl.gov> Reviewed-on: http://review.whamcloud.com/8174 Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3321Reviewed-by:
-
Jinshan Xiong authored
Move radix tree to osc layer to for performance improvement. Signed-off-by:
-
Jinshan Xiong authored
This way we can drop it async. Signed-off-by:
-
Jinshan Xiong authored
Add and discard pages from LRU in batch. Signed-off-by:
Niu Yawei <yawei.niu@intel.com> Reviewed-by:
-
Jinshan Xiong authored
This reverts a patch that was merged before lustre client was introduced into the stagign tree, so it's not in the history. The performance dropped a lot when memory reclaim process kicked in as ll_releasepage() was called to destroy lustre pages. It turned out that big overhead to allocate cl_env and keys on the fly so we have to revert this patch. The original problem for the reverted patch would be solved in a follow on patch instead. Signed-off-by:
-
John L. Hammond authored
Separate lclient was necessary to be shared between different client implementations, make no sense to have them separate in Linux kernel. Signed-off-by:
-
Oleg Drokin authored
CFS_PAGE_MASK is the same as PAGE_MASK, so get rid of it. We are replacing it with PAGE_MASK instead of PAGE_CACHE_MASK because PAGE_CACHE_* stuff is apparently going away. Signed-off-by:
-
Oleg Drokin authored
Allocating a big hash table using the formula for osd does not really work for clients. We will create new hash table for each mount on a single client which is a lot of memory more than expected. This patch limits the hash table up to 8M which has 524288 entries Signed-off-by:
Li Dongyang <dongyang.li@anu.edu.au> Reviewed-on: http://review.whamcloud.com/18048 Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7689Reviewed-by:
Fan Yong <fan.yong@intel.com> Reviewed-by:
Alex Zhuravlev <alexey.zhuravlev@intel.com> Signed-off-by:
-
Clifton Barnes authored
fix checkpatch.pl warning about 'Block comments use a trailing */ on a separate line' and 'Block comments use * on subsequent lines' Signed-off-by:
Clifton Barnes <clifton.a.barnes@gmail.com> Signed-off-by:
-
Daeseok Youn authored
fix checkpatch.pl warning about 'Logical continuations should be on the previous line' Signed-off-by:
Daeseok Youn <daeseok.youn@gmail.com> Signed-off-by:
-
Daeseok Youn authored
fix checkpatch.pl warning about 'line over 80 characters'. I just moved all line comment to above if statement. Signed-off-by:
-
Daeseok Youn authored
remove parenthesis around the CONST | CONST. It will be also fixed checkpatch.pl warning about "Alignment should match open parenthesis" becasue parenthesis were removed by this patch. Signed-off-by:
-
Daeseok Youn authored
the dgnc_offset_table has a same value with (1 << port). So I tried to replace dgnc_offset_table array with 1 << port. And also there are redundant assignments(tmp and current_port) inside while loop for checking uart port, and remove them. Signed-off-by:
-
H Hartley Sweeten authored
Fix the checkpatch.pl issues by using the BIT macro and defining some macros for the multi-bit fields. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
H Hartley Sweeten authored
For completeness, define the registers used by this driver and remove the magic numbers. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
H Hartley Sweeten authored
For aesthetics, add some whitespace to the digital output subdevice initialization. Signed-off-by:
-
H Hartley Sweeten authored
Fix the checkpatch.pl issues: WARNING: Block comments use * on subsequent lines Signed-off-by:
-
H Hartley Sweeten authored
This function assumes that the async subdevice has a cancel() function. It looks like all the current comedi drivers implement a cancel() for the async subdevices except for the dt2814 analog input usbdevice. Fix comedi_handle_events() so it does not try to call a non-existent cancel() function. Add a dev_warn() to __comedi_device_postconfig_async() so that any new driver authors will be reminded to implement the cancel(). Signed-off-by:
-
H Hartley Sweeten authored
Tidy up this function and fix the checkpatch.pl issues: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' Signed-off-by:
-
H Hartley Sweeten authored
Fix the checkpatch.pl issues. Signed-off-by:
-
H Hartley Sweeten authored
Fix the checkpatch.pl issues. Signed-off-by:
-
H Hartley Sweeten authored
Fix the checkpatch.pl issues by using the BIT macro and defining some macros for the multi-bit fields. Signed-off-by:
-
H Hartley Sweeten authored
Fix the checkpatch.pl issue: CHECK: spinlock_t definition without comment Signed-off-by:
-
H Hartley Sweeten authored
Fix the checkpatch.pl issues. Signed-off-by:
-
H Hartley Sweeten authored
Fix the checkpatch.pl issues: WARNING: Block comments use * on subsequent lines Signed-off-by:
-
H Hartley Sweeten authored
For completeness, define the registers used by this driver and remove the magic numbers. Signed-off-by:
-
H Hartley Sweeten authored
For aesthetics, add some whitespace to the comedi_driver definition. Signed-off-by:
-
H Hartley Sweeten authored
For aesthetics, add some whitespace to the digital output subdevice initialization. Signed-off-by:
-
Ben Marsh authored
Chnages memory allocation style in order to silence a checkpatch.pl warning. Signed-off-by:
Ben Marsh <bmarsh94@gmail.com> Signed-off-by:
-
Rob Herring authored
timed_output was only used by the Android vibrator HAL which has now learned how to use LED triggers instead[1]. Any users of it in AOSP are on ancient kernels. Adding support for LED triggers is purely DT changes and proper kernel config. [1] https://android.googlesource.com/platform%2Fhardware%2Flibhardware/+/61701df363310a5cbd95e3e1638baa9526e42c9b Cc: John Stultz <john.stultz@linaro.org> Cc: "Arve Hjønnevåg" <arve@android.com> Cc: Riley Andrews <riandrews@android.com> Signed-off-by:
Rob Herring <robh@kernel.org> Acked-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
-
David Kershner authored
Don't need to have a wmb() in visordriver_remove_device. Also removed an unnecessary check for drv being null. Signed-off-by:
David Kershner <david.kershner@unisys.com> Signed-off-by:
-
Alexander Curtin authored
The channel_bytes attribute in the visor_device struct was meant to keep track of the number of bytes in the associated channel of the device. Not only is the variable never set nor used, but the information can already be accessed by referencing visor_device->visorchannel->nbytes. Signed-off-by:
Alexander Curtin <alexander.curtin@unisys.com> Signed-off-by:
-
Alexander Curtin authored
The 'visor_device.devnodes' field was used for displaying driver version information through the devmajorminor sysfs attribute, which has recently been removed, rendering the field unnecessary. Signed-off-by:
-
