Fixes the following W=1 kernel build warning(s):

 drivers/dma/of-dma.c:57: warning: Function parameter or member 'ofdma' not described in 'of_dma_router_xlate'
 drivers/dma/of-dma.c:57: warning: Excess function parameter 'of_dma' description in 'of_dma_router_xlate'
 drivers/dma/of-dma.c:107: warning: Function parameter or member 'data' not described in 'of_dma_controller_register'
 drivers/dma/of-dma.c:308: warning: Function parameter or member 'ofdma' not described in 'of_dma_simple_xlate'
 drivers/dma/of-dma.c:308: warning: Excess function parameter 'of_dma' description in 'of_dma_simple_xlate'
 drivers/dma/of-dma.c:338: warning: Function parameter or member 'ofdma' not described in 'of_dma_xlate_by_chan_id'
 drivers/dma/of-dma.c:338: warning: Excess function parameter 'of_dma' description in 'of_dma_xlate_by_chan_id'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200714111546.1755231-3-lee.jones@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Struct attribute names must be an exact match or the kerneldoc checker
gets confused.

Fixes the following W=1 kernel build warning(s):

 drivers/dma/mediatek/mtk-hsdma.c:120: warning: Function parameter or member 'desc1' not described in 'mtk_hsdma_pdesc'
 drivers/dma/mediatek/mtk-hsdma.c:120: warning: Function parameter or member 'desc2' not described in 'mtk_hsdma_pdesc'
 drivers/dma/mediatek/mtk-hsdma.c:120: warning: Function parameter or member 'desc3' not described in 'mtk_hsdma_pdesc'
 drivers/dma/mediatek/mtk-hsdma.c:120: warning: Function parameter or member 'desc4' not described in 'mtk_hsdma_pdesc'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-mediatek@lists.infradead.org
Link: https://lore.kernel.org/r/20200714111546.1755231-2-lee.jones@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Renesas RZ/G2H (R8A774E1) SoC also has the R-Car gen3 compatible
DMA controllers, therefore document RZ/G2H specific bindings.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/1594676120-5862-5-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.

This code was detected with the help of Coccinelle and, audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Addresses-KSPP-ID: https://github.com/KSPP/linux/issues/83
Link: https://lore.kernel.org/r/20200619224334.GA7857@embeddedorSigned-off-by: Vinod Koul <vkoul@kernel.org>

Move the uc->tchan/rchan checks to the IO wrappers itself instead of
calling the functions with tchan/rchan directly.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20200707102352.28773-6-peter.ujfalusi@ti.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Instead of using higher level wrappers (udma_rchanrt/tchanrt read/write),
use the underlying register access functions directly.

This will allow changes in the higher level wrappers within the DMAengine
driver.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20200707102352.28773-5-peter.ujfalusi@ti.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The register offsets and functions are the same among TCHAN and RCHAN.
Use generic, common names for them.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20200707102352.28773-4-peter.ujfalusi@ti.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The ring_get_occ is redundant as the k3_ringacc_ring_pop() is also
checking the occ of the ring.

With removing the ring_get_occ, the function can be simplified as well.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20200707102352.28773-3-peter.ujfalusi@ti.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The descriptors are allocated via wither dma_pool or dma_alloc_coherent.

There is no need for the dma_sync_singel_* calls.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20200707102352.28773-2-peter.ujfalusi@ti.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Fix build errors when CONFIG_PCI_MSI is not enabled by making the
driver depend on PCI_MSI:

ld: drivers/dma/idxd/device.o: in function `idxd_mask_msix_vector':
device.c:(.text+0x26f): undefined reference to `pci_msi_mask_irq'
ld: drivers/dma/idxd/device.o: in function `idxd_unmask_msix_vector':
device.c:(.text+0x2af): undefined reference to `pci_msi_unmask_irq'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: dmaengine@vger.kernel.org
Cc: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/9dee3f46-70d9-ea75-10cb-5527ab297d1d@infradead.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

This patch adds the qurik to use burst transfers only
for pl330 controller, even for request with a length of 1.

Although, the correct way should be: if the peripheral request
length is 1, the peripheral should use SINGLE request, and then
notify the dmac using SINGLE mode by src/dst_maxburst with 1.

For example, on the Rockchip SoCs, all the peripherals can use
SINGLE or BURST request by setting GRF registers. it is possible
that if these peripheral drivers are used only for Rockchip SoCs.
Unfortunately, it's not, such as dw uart, which is used so widely,
and we can't set src/dst_maxburst according to the SoCs' specific
to compatible with all the other SoCs.

So, for convenience, all the peripherals are set as BURST request
by default on the Rockchip SoCs. even for request with a length of 1.
the current pl330 driver will perform SINGLE transfer if the client's
maxburst is 1, which still should be working according to chapter 2.6.6
of datasheet which describe how DMAC performs SINGLE transfers for
a BURST request. Unfortunately, it's broken on the Rockchip SoCs,
which support only matching transfers, such as BURST transfer for
BURST request, SINGLE transfer for SINGLE request.

Finally, we add the quirk to specify pl330 to use burst transfers only.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Link: https://lore.kernel.org/r/1593439555-68130-5-git-send-email-sugar.zhang@rock-chips.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

This patch Adds the quirk 'arm,pl330-periph-burst' for pl330.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1593439555-68130-4-git-send-email-sugar.zhang@rock-chips.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Only the unaligned burst transfers have the dregs.
so, still use BURST transfer with a reduced size
for better performance.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Link: https://lore.kernel.org/r/1593439555-68130-3-git-send-email-sugar.zhang@rock-chips.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

There is no reason to limit the performance on the 'NO-FLUSHP' SoCs,
because 'FLUSHP' instruction is broken on these platforms, so remove
the limit to improve the efficiency.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Link: https://lore.kernel.org/r/1593439555-68130-2-git-send-email-sugar.zhang@rock-chips.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Drop the doubled word "has".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dmaengine@vger.kernel.org
Link: https://lore.kernel.org/r/20200704034502.17199-2-rdunlap@infradead.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Switch driver to use MSIX mask and unmask instead of the ignore bit.
When ignore bit is cleared, we must issue an MMIO read to ensure writes
have all arrived and check and process any additional completions. The
ignore bit does not queue up any pending MSIX interrupts. The mask bit
however does. Use API call from interrupt subsystem to mask MSIX
interrupt since the hardware does not have convenient mask bit register.
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/159319517621.70410.11816465052708900506.stgit@djiang5-desk3.ch.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add wq drain support. When a wq is being released, it needs to wait for
all in-flight operation to complete.  A device control function
idxd_wq_drain() has been added to facilitate this. A wq drain call
is added to the char dev on release to make sure all user operations are
complete. A wq drain is also added before the wq is being disabled.

A drain command can take an unpredictable period of time. Interrupt support
for device commands is added to allow waiting on the command to
finish. If a previous command is in progress, the new submitter can block
until the current command is finished before proceeding. The interrupt
based submission will submit the command and then wait until a command
completion interrupt happens to complete. All commands are moved to the
interrupt based command submission except for the device reset during
probe, which will be polled.

Fixes: 42d279f9 ("dmaengine: idxd: add char driver to expose submission portal to userland")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/159319502515.69593.13451647706946040301.stgit@djiang5-desk3.ch.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

According to the datasheet of pl330:

Example 2-1 Using DMAGO with the debug instruction registers

1. Create a program for the DMA channel
2. Store the program in a region of system memory
3. Poll the DBGSTATUS Register to ensure that the debug is idle
4. Write to the DBGINST0 Register
5. Write to the DBGINST1 Register
6. Write zero to the DBGCMD Register

so, we should make sure the debug is idle before step 4/5/6, not
only step 6. if not, there maybe a risk that fail to write DBGINST0/1.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Link: https://lore.kernel.org/r/1591234598-78919-1-git-send-email-sugar.zhang@rock-chips.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Kill the percpu-rwsem for work submission in favor of an sbitmap_queue.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/159225446631.68253.8860709181621260997.stgit@djiang5-desk3.ch.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Correct to standard convention. All sysfs paths seem to be missing
leading /.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/159225447176.68253.2922149693913698177.stgit@djiang5-desk3.ch.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

acpi_dev_get_resources() does perform the NULL pointer check against
ACPI companion device which is given as function parameter. Thus,
there is no need to duplicate this check in the caller.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200622181311.67649-1-andriy.shevchenko@linux.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.

This code was detected with the help of Coccinelle and, audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Link: https://lore.kernel.org/r/20200617211135.GA8660@embeddedorSigned-off-by: Vinod Koul <vkoul@kernel.org>

I have switched DMAengine tree to kernel.org now, so update in
MAINTAINERS file
Signed-off-by: Vinod Koul <vkoul@kernel.org>

The cookie tracking in dmaengine expects all submissions completed in
order. Some DMA devices like Intel DSA can complete submissions out of
order, especially if configured with a work queue sharing multiple DMA
engines. Add a status DMA_OUT_OF_ORDER that tx_status can be returned for
those DMA devices. The user should use callbacks to track the completion
rather than the DMA cookie. This would address the issue of dmatest
complaining that descriptors are "busy" when the cookie count goes
backwards due to out of order completion. Add DMA_COMPLETION_NO_ORDER
DMA capability to allow the driver to flag the device's ability to complete
operations out of order.
Reported-by: Swathi Kovvuri <swathi.kovvuri@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Tested-by: Swathi Kovvuri <swathi.kovvuri@intel.com>
Link: https://lore.kernel.org/r/158939557151.20335.12404113976045569870.stgit@djiang5-desk3.ch.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

On a MMP2, the DMA interrupt is shared by all channels of the peripheral
DMA controller and the audio DMA controller. Both drivers can identify
their interrupts, but only the PDMA driver marks the line shared:

  [    1.185782] mmp-pdma d4000000.dma: initialized 16 channels
  [    1.186808] mmp-tdma d42a0800.adma: IRQ index 1 not found
  [    1.194317] genirq: Flags mismatch irq 64. 00000000 (tdma) vs. 00000080 (pdma)
  [    1.197894] mmp-tdma: probe of d42a0800.adma failed with error -16

Let's turn on IRQF_SHARED in the ADMA driver as well.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20200601192252.172773-1-lkundrak@v3.skSigned-off-by: Vinod Koul <vkoul@kernel.org>

When there's a single interrupt for all the DMA channels, the
unsuccessful attempt to request separate IRQs emits useless warnings:

  [    1.370381] mmp-pdma d4000000.dma: IRQ index 1 not found
  ...
  [    1.412398] mmp-pdma d4000000.dma: IRQ index 15 not found
  [    1.418308] mmp-pdma d4000000.dma: initialized 16 channels

Avoid that, treating the IRQs as optional.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20200601192337.172869-1-lkundrak@v3.skSigned-off-by: Vinod Koul <vkoul@kernel.org>

`-objs` is fitted for building host programs, change to `-y`,
more straightforward for device drivers.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200526182416.52805-2-andriy.shevchenko@linux.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

If PCI enumerated controller has a companion device,
register it in the ACPI DMA controllers as well.

Fixes: f7c799e9 ("dmaengine: dw: we do support Merrifield SoC in PCI mode")
Depends-on: b685fe26 ("dmaengine: dw: platform: Split ACPI helpers to separate module")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200526182416.52805-1-andriy.shevchenko@linux.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Document RZ/G1H (R8A7742) SoC bindings.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1590356277-19993-5-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Pull SafeSetID update from Micah Morton:
 "Add additional LSM hooks for SafeSetID

  SafeSetID is capable of making allow/deny decisions for set*uid calls
  on a system, and we want to add similar functionality for set*gid
  calls.

  The work to do that is not yet complete, so probably won't make it in
  for v5.8, but we are looking to get this simple patch in for v5.8
  since we have it ready.

  We are planning on the rest of the work for extending the SafeSetID
  LSM being merged during the v5.9 merge window"

* tag 'LSM-add-setgid-hook-5.8-author-fix' of git://github.com/micah-morton/linux:
  security: Add LSM hooks to set*gid syscalls

The SafeSetID LSM uses the security_task_fix_setuid hook to filter
set*uid() syscalls according to its configured security policy. In
preparation for adding analagous support in the LSM for set*gid()
syscalls, we add the requisite hook here. Tested by putting print
statements in the security_task_fix_setgid hook and seeing them get hit
during kernel boot.
Signed-off-by: Thomas Cedeno <thomascedeno@google.com>
Signed-off-by: Micah Morton <mortonm@chromium.org>

Pull btrfs updates from David Sterba:
 "This reverts the direct io port to iomap infrastructure of btrfs
  merged in the first pull request. We found problems in invalidate page
  that don't seem to be fixable as regressions or without changing iomap
  code that would not affect other filesystems.

  There are four reverts in total, but three of them are followup
  cleanups needed to revert a43a67a2 cleanly. The result is the
  buffer head based implementation of direct io.

  Reverts are not great, but under current circumstances I don't see
  better options"

* tag 'for-5.8-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Revert "btrfs: switch to iomap_dio_rw() for dio"
  Revert "fs: remove dio_end_io()"
  Revert "btrfs: remove BTRFS_INODE_READDIO_NEED_LOCK"
  Revert "btrfs: split btrfs_direct_IO to read and write part"

Pull networking fixes from David Miller:

 1) Fix cfg80211 deadlock, from Johannes Berg.

 2) RXRPC fails to send norigications, from David Howells.

 3) MPTCP RM_ADDR parsing has an off by one pointer error, fix from
    Geliang Tang.

 4) Fix crash when using MSG_PEEK with sockmap, from Anny Hu.

 5) The ucc_geth driver needs __netdev_watchdog_up exported, from
    Valentin Longchamp.

 6) Fix hashtable memory leak in dccp, from Wang Hai.

 7) Fix how nexthops are marked as FDB nexthops, from David Ahern.

 8) Fix mptcp races between shutdown and recvmsg, from Paolo Abeni.

 9) Fix crashes in tipc_disc_rcv(), from Tuong Lien.

10) Fix link speed reporting in iavf driver, from Brett Creeley.

11) When a channel is used for XSK and then reused again later for XSK,
    we forget to clear out the relevant data structures in mlx5 which
    causes all kinds of problems. Fix from Maxim Mikityanskiy.

12) Fix memory leak in genetlink, from Cong Wang.

13) Disallow sockmap attachments to UDP sockets, it simply won't work.
    From Lorenz Bauer.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
  net: ethernet: ti: ale: fix allmulti for nu type ale
  net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init
  net: atm: Remove the error message according to the atomic context
  bpf: Undo internal BPF_PROBE_MEM in BPF insns dump
  libbpf: Support pre-initializing .bss global variables
  tools/bpftool: Fix skeleton codegen
  bpf: Fix memlock accounting for sock_hash
  bpf: sockmap: Don't attach programs to UDP sockets
  bpf: tcp: Recv() should return 0 when the peer socket is closed
  ibmvnic: Flush existing work items before device removal
  genetlink: clean up family attributes allocations
  net: ipa: header pad field only valid for AP->modem endpoint
  net: ipa: program upper nibbles of sequencer type
  net: ipa: fix modem LAN RX endpoint id
  net: ipa: program metadata mask differently
  ionic: add pcie_print_link_status
  rxrpc: Fix race between incoming ACK parser and retransmitter
  net/mlx5: E-Switch, Fix some error pointer dereferences
  net/mlx5: Don't fail driver on failure to create debugfs
  net/mlx5e: CT: Fix ipv6 nat header rewrite actions
  ...

This reverts commit a43a67a2.

This patch reverts the main part of switching direct io implementation
to iomap infrastructure. There's a problem in invalidate page that
couldn't be solved as regression in this development cycle.

The problem occurs when buffered and direct io are mixed, and the ranges
overlap. Although this is not recommended, filesystems implement
measures or fallbacks to make it somehow work. In this case, fallback to
buffered IO would be an option for btrfs (this already happens when
direct io is done on compressed data), but the change would be needed in
the iomap code, bringing new semantics to other filesystems.

Another problem arises when again the buffered and direct ios are mixed,
invalidation fails, then -EIO is set on the mapping and fsync will fail,
though there's no real error.

There have been discussions how to fix that, but revert seems to be the
least intrusive option.

Link: https://lore.kernel.org/linux-btrfs/20200528192103.xm45qoxqmkw7i5yl@fiona/Signed-off-by: David Sterba <dsterba@suse.com>

On AM65xx MCU CPSW2G NUSS and 66AK2E/L NUSS allmulti setting does not allow
unregistered mcast packets to pass.

This happens, because ALE VLAN entries on these SoCs do not contain port
masks for reg/unreg mcast packets, but instead store indexes of
ALE_VLAN_MASK_MUXx_REG registers which intended for store port masks for
reg/unreg mcast packets.
This path was missed by commit 9d1f6447 ("net: ethernet: ti: ale: fix
seeing unreg mcast packets with promisc and allmulti disabled").

Hence, fix it by taking into account ALE type in cpsw_ale_set_allmulti().

Fixes: 9d1f6447 ("net: ethernet: ti: ale: fix seeing unreg mcast packets with promisc and allmulti disabled")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ALE parameters structure is created on stack, so it has to be reset
before passing to cpsw_ale_create() to avoid garbage values.

Fixes: 93a76530 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexei Starovoitov says:

====================
pull-request: bpf 2020-06-12

The following pull-request contains BPF updates for your *net* tree.

We've added 26 non-merge commits during the last 10 day(s) which contain
a total of 27 files changed, 348 insertions(+), 93 deletions(-).

The main changes are:

1) sock_hash accounting fix, from Andrey.

2) libbpf fix and probe_mem sanitizing, from Andrii.

3) sock_hash fixes, from Jakub.

4) devmap_val fix, from Jesper.

5) load_bytes_relative fix, from YiFei.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Looking into the context (atomic!) and the error message should be dropped.
Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull more cifs updates from Steve French:
 "12 cifs/smb3 fixes, 2 for stable.

   - add support for idsfromsid on create and chgrp/chown allowing
     ability to save owner information more naturally for some workloads

   - improve query info (getattr) when SMB3.1.1 posix extensions are
     negotiated by using new query info level"

* tag '5.8-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: Add debug message for new file creation with idsfromsid mount option
  cifs: fix chown and chgrp when idsfromsid mount option enabled
  smb3: allow uid and gid owners to be set on create with idsfromsid mount option
  smb311: Add tracepoints for new compound posix query info
  smb311: add support for using info level for posix extensions query
  smb311: Add support for lookup with posix extensions query info
  smb311: Add support for SMB311 query info (non-compounded)
  SMB311: Add support for query info using posix extensions (level 100)
  smb3: add indatalen that can be a non-zero value to calculation of credit charge in smb2 ioctl
  smb3: fix typo in mount options displayed in /proc/mounts
  cifs: Add get_security_type_str function to return sec type.
  smb3: extend fscache mount volume coherency check