- 23 Dec, 2021 20 commits
-
-
Nick Child authored
Make `find_via_cuda` and `find_via_pmu` initialization functions. Previously, their definitions in `drivers/macintosh/via-cuda.h` include the `__init` attribute but their alternative definitions in `arch/powerpc/powermac/sectup./c` and prototypes in `include/linux/ cuda.h` and `include/linux/pmu.h` do not use the `__init` macro. Since, only initialization functions call `find_via_cuda` and `find_via_pmu` it is safe to label these functions with `__init`. Signed-off-by:
Nick Child <nick.child@ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211216220035.605465-21-nick.child@ibm.com
-
Nick Child authored
Some functions defined in 'arch/powerpc/platforms/512x' are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Also, change function declarations in header files to include `__init`. Signed-off-by:
-
Nick Child authored
Some functions defined in 'arch/powerpc/platforms/85xx' are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Also, change function declarations in header files to include `__init`. Signed-off-by:
-
Nick Child authored
Some functions defined in 'arch/powerpc/platforms/83xx' are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Also, change function declarations in header files to include `__init`. Signed-off-by:
-
Nick Child authored
Some functions defined in 'arch/powerpc/platforms/embedded6xx' are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Also, change function declarations in header files to include `__init`. Signed-off-by:
-
Nick Child authored
Some functions defined in 'arch/powerpc/platforms/44x/' are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Signed-off-by:
-
Nick Child authored
Some functions defined in 'arch/powerpc/platforms/4xx' are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Signed-off-by:
-
Nick Child authored
Some functions defined in 'arch/powerpc/platforms/ps3' are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Also, change function declarations in header files to include `__init`. Signed-off-by:
-
Nick Child authored
Some functions defined in 'arch/powerpc/platforms/pseries' are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Also, change function declarations in header files to include `__init`. Signed-off-by:
-
Nick Child authored
Some functions defined in 'arch/powerpc/platforms/powernv' are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Also, change function declarations in header files to include `__init`. Signed-off-by:
-
Nick Child authored
Some functions defined in 'arch/powerpc/platforms/powermac` are only called by other initialization functions and therefore should inherit the attribute. Also, change function declarations in header files to include `__init`. Signed-off-by:
-
Nick Child authored
Some functions defined in 'arch/powerpc/platforms/pasemi' are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Also, change function declarations in header files to include `__init`. Signed-off-by:
-
Nick Child authored
The function `Enable_SRAM` defined in 'arch/powerpc/platforms/chrp' is deserving of an `__init` macro attribute. This function is only called by other initialization functions and therefore should inherit the attribute. Signed-off-by:
-
Nick Child authored
Some functions defined in 'arch/powerpc/platforms/cell' are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Signed-off-by:
-
Nick Child authored
`xmon_register_spus` defined in 'arch/powerpc/xmon' is deserving of an `__init` macro attribute. This functions is only called by other initialization functions and therefore should inherit the attribute. Also, change the function declaration in the header file to include `__init`. Signed-off-by:
-
Nick Child authored
Some files functions in 'arch/powerpc/sysdev' are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Also, change function declarations in header files to include `__init`. Signed-off-by:
-
Nick Child authored
Some functions defined in 'arch/powerpc/perf' are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Also, change function declarations in header files to include `__init`. Signed-off-by:
-
Nick Child authored
Some functions defined in 'arch/powerpc/mm' are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Also, change function declarations in header files to include `__init`. Signed-off-by:
-
Nick Child authored
Some functions defined in 'arch/powerpc/lib' are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Also, change function declarations in header files to include `__init`. Signed-off-by:
-
Nick Child authored
Some functions defined in `arch/powerpc/kernel` (and one in `arch/powerpc/ kexec`) are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Also, change function declarations in header files to include `__init`. Signed-off-by:
-
- 21 Dec, 2021 2 commits
-
-
Michael Ellerman authored
We have a general signal fuzzer, sigfuz, which can modify the MSR & NIP before sigreturn. But the chance of it hitting a kernel address and also clearing MSR_PR is fairly slim. So add a specific test of sigreturn to a kernel address, both with and without attempting to clear MSR_PR (which the kernel must block). Signed-off-by:
-
Rob Herring authored
"spidev" is not a real device, but a Linux implementation detail. It has never been documented either. The kernel has WARNed on the use of it for over 6 years. Time to remove its usage from the tree. Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
- 20 Dec, 2021 4 commits
-
-
Minghao Chi authored
Return value from ocxl_context_attach() directly instead of taking this in another redundant variable. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Minghao Chi <chi.minghao@zte.com.cn> Acked-by:
Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by:
-
Nicholas Piggin authored
pmd_huge() is defined to false when HUGETLB_PAGE is not configured, but the vmap code still installs huge PMDs. This leads to false bad PMD errors when vunmapping because it is not seen as a huge PTE, and the bad PMD check catches it. The end result may not be much more serious than some bad pmd warning messages, because the pmd_none_or_clear_bad() does what we wanted and clears the huge PTE anyway. Fix this by checking pmd_is_leaf(), which checks for a PTE regardless of config options. The whole huge/large/leaf stuff is a tangled mess but that's kernel-wide and not something we can improve much in arch/powerpc code. pmd_page(), pud_page(), etc., called by vmalloc_to_page() on huge vmaps can similarly trigger a false VM_BUG_ON when CONFIG_HUGETLB_PAGE=n, so those checks are adjusted. The checks were added by commit d6eacedd ("powerpc/book3s: Use config independent helpers for page table walk"), while implementing a similar fix for other page table walking functions. Fixes: d909f910 ("powerpc/64s/radix: Enable HAVE_ARCH_HUGE_VMAP") Cc: stable@vger.kernel.org # v5.3+ Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Yang Guang authored
Use the macro 'swap()' defined in 'include/linux/minmax.h' to avoid opencoding it. Reported-by:
David Yang <davidcomponentone@gmail.com> Signed-off-by:
Yang Guang <yang.guang5@zte.com.cn> [mpe: Add include of linux/minmax.h] Signed-off-by:
-
Christophe JAILLET authored
'mpic->protected' is a bitmap. So use 'bitmap_zalloc()' to simplify code and improve the semantic, instead of hand writing it. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
- 16 Dec, 2021 12 commits
-
-
Sachin Sant authored
Mitigation patching test iterates over a set of mitigations irrespective of whether a certain mitigation is supported/available in the kernel. This causes following messages on a kernel where some mitigations are unavailable: Spawned threads enabling/disabling mitigations ... cat: entry_flush: No such file or directory cat: uaccess_flush: No such file or directory Waiting for timeout ... OK This patch adds a check for available mitigations in the kernel. Reported-by:
Nageswara R Sastry <rnsastry@linux.ibm.com> Signed-off-by:
Sachin Sant <sachinp@linux.vnet.ibm.com> Tested-by:
Russell Currey <ruscur@russell.cc> Signed-off-by:
-
Nicholas Piggin authored
Slab is up at this point, using the bootmem allocator triggers a warning. Switch to using the regular cpumask allocator. Signed-off-by:
Nathan Lynch <nathanl@linux.ibm.com> Reviewed-by:
Laurent Dufour <ldufour@linux.ibm.com> Signed-off-by:
-
Nicholas Piggin authored
Reading the CFAR register is quite costly (~20 cycles on POWER9). It is a good idea to have for most synchronous interrupts, but for async ones it is much less important. Doorbell, external, and decrementer interrupts are the important asynchronous ones. HV interrupts can't skip CFAR if KVM HV is possible, because it might be a guest exit that requires CFAR preserved. But the important pseries interrupts can avoid loading CFAR. Signed-off-by:
-
Nicholas Piggin authored
Move the assertions requiring restart table searches under CONFIG_PPC_IRQ_SOFT_MASK_DEBUG. Signed-off-by:
-
Nicholas Piggin authored
Enabling MSR[EE] in interrupt handlers while interrupts are still soft masked allows PMIs to profile interrupt handlers to some degree, beyond what SIAR latching allows. When perf is not being used, this is almost useless work. It requires an extra mtmsrd in the irq handler, and it also opens the door to masked interrupts hitting and requiring replay, which is more expensive than just taking them directly. This effect can be noticable in high IRQ workloads. Avoid enabling MSR[EE] unless perf is currently in use. This saves about 60 cycles (or 8%) on a simple decrementer interrupt microbenchmark. Replayed interrupts drop from 1.4% of all interrupts taken, to 0.003%. This does prevent the soft-nmi interrupt being taken in these handlers, but that's not too reliable anyway. The SMP watchdog will continue to be the reliable way to catch lockups. Signed-off-by:
-
Nicholas Piggin authored
Interrupt code enables MSR[EE] in some irq handlers while keeping local irqs disabled via soft-mask, allowing PMI interrupts to be taken as soft-NMI to improve profiling of irq handlers. When perf is not enabled, there is no point to doing this, it's additional overhead. So provide a function that can say if PMIs should be taken promptly if possible. Signed-off-by:
-
Nicholas Piggin authored
The mtmsrd to enable MSR[RI] can be combined with the mtmsrd to enable MSR[EE] in interrupt entry code, for those interrupts which enable EE. This helps performance of important synchronous interrupts (e.g., page faults). This is similar to what commit dd152f70 ("powerpc/64s: system call avoid setting MSR[RI] until we set MSR[EE]") does for system calls. Do this by enabling EE and RI together at the beginning of the entry wrapper if PACA_IRQ_HARD_DIS is clear, and only enabling RI if it is set. Asynchronous interrupts set PACA_IRQ_HARD_DIS, but synchronous ones leave it unchanged, so by default they always get EE=1 unless they have interrupted a caller that is hard disabled. When the sync interrupt later calls interrupt_cond_local_irq_enable(), it will not require another mtmsrd because MSR[EE] was already enabled here. This avoids one mtmsrd L=1 for synchronous interrupts on 64s, which saves about 20 cycles on POWER9. And for kernel-mode interrupts, both synchronous and asynchronous, this saves an additional 40 cycles due to the mtmsrd being moved ahead of mfspr SPRN_AMR, which prevents a SPR scoreboard stall. Signed-off-by:
-
Nicholas Piggin authored
Make synchronous interrupt handler entry wrappers enable MSR[EE] if MSR[EE] was enabled in the interrupted context. IRQs are soft-disabled at this point so there is no change to high level code, but it's a masked interrupt could fire. This is a performance disadvantage for interrupts which do not later call interrupt_cond_local_irq_enable(), because an an additional mtmsrd or wrtee instruction is executed. However the important synchronous interrupts (e.g., page fault) do enable interrupts, so the performance disadvantage is mostly avoided. In the next patch, MSR[RI] enabling can be combined with MSR[EE] enabling, which mitigates the performance drop for the former and gives a performance advanage for the latter interrupts, on 64s machines. 64e is coming along for the ride for now to avoid divergences with 64s in this tricky code. Signed-off-by:
-
Nicholas Piggin authored
KVM does not support VAS so guests always print a useless error on boot vas: HCALL(398) error -2, query_type 0, result buffer 0x57f2000 Change this to only print the message if the error is not H_FUNCTION. Signed-off-by: -
Kajol Jain authored
The code represent memory/cache level data based on PERF_MEM_LVL_* namespace, which is in the process of deprication in the favour of newer composite PERF_MEM_{LVLNUM_,REMOTE_,SNOOPX_,HOPS_} fields. Add data source encodings to represent cache/memory data based on newer composite PERF_MEM_{LVLNUM_,REMOTE_,SNOOPX_,HOPS_} fields. Add data source encodings to represent data coming from local memory/Remote memory/distant memory and remote/distant cache hits. In order to represent data coming from OpenCAPI cache/memory, we use LVLNUM "PMEM" field which is used to present persistent memory accesses. Result in power10 system with patch changes: localhost:# ./perf mem report --sort="mem,sym,dso" --stdio # Overhead Samples Memory access Symbol Shared Object # ........ ............ ........................ .......................... ................ # 29.46% 2331 L1 or L1 hit [.] __random libc-2.28.so 23.11% 2121 L1 or L1 hit [.] producer_populate_cache producer_consumer 18.56% 1758 L1 or L1 hit [.] __random_r libc-2.28.so 15.64% 1559 L2 or L2 hit [.] __random libc-2.28.so ..... 0.09% 5 Remote socket, same board Any cache hit [.] __random libc-2.28.so 0.07% 4 Remote socket, same board Any cache hit [.] __random libc-2.28.so ..... Signed-off-by:Kajol Jain <kjain@linux.ibm.com> Reviewed-by:
Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by:
-
Kajol Jain authored
The code represent data coming from L1/L2/L3 cache hits based on PERF_MEM_LVL_* namespace, which is in the process of deprecation in the favour of newer composite PERF_MEM_{LVLNUM_,REMOTE_,SNOOPX_,HOPS_} fields. Add data source encodings to represent L1/L2/L3 cache hits based on newer composite PERF_MEM_{LVLNUM_,REMOTE_,SNOOPX_,HOPS_} fields for power10 and older platforms Result in power9 system without patch changes: localhost:# ./perf mem report --sort="mem,sym,dso" --stdio # Overhead Samples Memory access Symbol Shared Object # ........ ............ ........................ ................................. ................ # 29.51% 1 L2 hit [k] perf_event_exec [kernel.vmlinux] 27.05% 1 L1 hit [k] perf_ctx_unlock [kernel.vmlinux] 13.93% 1 L1 hit [k] vtime_delta [kernel.vmlinux] 13.11% 1 L1 hit [k] prepend_path.isra.11 [kernel.vmlinux] 8.20% 1 L1 hit [.] 00000038.plt_call.__GI_strlen libc-2.28.so 8.20% 1 L1 hit [k] perf_event_interrupt [kernel.vmlinux] Result in power9 system with patch changes: localhost:# ./perf mem report --sort="mem,sym,dso" --stdio # Overhead Samples Memory access Symbol Shared Object # ........ ............ ........................ .......................... ................ # 36.63% 1 L2 or L2 hit [k] perf_event_exec [kernel.vmlinux] 25.50% 1 L1 or L1 hit [k] vtime_delta [kernel.vmlinux] 13.12% 1 L1 or L1 hit [k] unmap_region [kernel.vmlinux] 12.62% 1 L1 or L1 hit [k] perf_sample_event_took [kernel.vmlinux] 6.93% 1 L1 or L1 hit [k] perf_ctx_unlock [kernel.vmlinux] 5.20% 1 L1 or L1 hit [.] __memcpy_power7 libc-2.28.so Signed-off-by: -
Kajol Jain authored
Add new macros for mem_hops field which can be used to represent remote-node, socket and board level details. Currently the code had macro for HOPS_0, which corresponds to data coming from another core but same node. Add new macros for HOPS_1 to HOPS_3 to represent remote-node, socket and board level data. For ex: Encodings for mem_hops fields with L2 cache: L2 - local L2 L2 | REMOTE | HOPS_0 - remote core, same node L2 L2 | REMOTE | HOPS_1 - remote node, same socket L2 L2 | REMOTE | HOPS_2 - remote socket, same board L2 L2 | REMOTE | HOPS_3 - remote board L2 Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
-
- 15 Dec, 2021 1 commit
-
-
Michael Ellerman authored
Bring in some more KVM commits from our KVM topic branch.
-
- 14 Dec, 2021 1 commit
-
-
Sean Christopherson authored
Use kvm_arch_vcpu_get_wait() to get a vCPU's rcuwait object instead of using vcpu->wait directly in kvmhv_run_single_vcpu(). Functionally, this is a nop as vcpu->arch.waitp is guaranteed to point at vcpu->wait. But that is not obvious at first glance, and a future change coming in via the KVM tree, commit 510958e9 ("KVM: Force PPC to define its own rcuwait object"), will hide vcpu->wait from architectures that define __KVM_HAVE_ARCH_WQP to prevent generic KVM from attepting to wake a vCPU with the wrong rcuwait object. Reported-by:
Sean Christopherson <seanjc@google.com> Tested-by:
-
