Prepare svc_xprt_received() to be called from transport code instead
of from generic RPC server code.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

svc_rdma_sendto() now waits for the NIC hardware to finish with
the pages backing rq_res. We still have to release the page array
in some cases, but now it's always safe to immediately re-use the
page backing rq_res's head buffer.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Clean up. This significantly reduces the size of struct
svc_rdma_send_ctxt.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Currently svc_rdma_sendto() migrates xdr_buf pages into a separate
page list and NULLs out a bunch of entries in rq_pages while the
pages are under I/O. The Send completion handler then frees those
pages later.

Instead, let's wait for the Send completion, then handle page
releasing in the nfsd thread. I'd like to avoid the cost of 250+
put_page() calls in the Send completion handler, which is single-
threaded.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Refactor a bit of commonly used logic so that every site that wants
a close deferred to an nfsd thread does all the right things
(set_bit(XPT_CLOSE) then enqueue).

Also, once XPT_CLOSE is set on a transport, it is never cleared. If
XPT_CLOSE is already set, then the close is already being handled
and the enqueue can be skipped.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Post more Receives when the number of pending Receives drops below
a water mark. The batch mechanism is disabled if the underlying
device cannot support a reasonably-sized Receive Queue.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Replace svc_rdma_post_recv() with the new batch receive mechanism.
For the moment it is posting just a single Receive WR at a time,
so no change in behavior is expected.

Since svc_rdma_wc_receive() was the last call site for
svc_rdma_post_recv(), it is removed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Introduce a server-side mechanism similar to commit e340c2d6
("xprtrdma: Reduce the doorbell rate (Receive)") to post Receive
WRs in batch. Its first consumer is svc_rdma_post_recvs(), which
posts the initial set of Receive WRs.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

xprt pinning was removed in commit 365e9992 ("svcrdma: Remove
transport reference counting"), but this comment was not updated
to reflect that change.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Clean up: explain why svc_xprt_enqueue() is invoked in the event
handler even though no xpt_flags bits are toggled here.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

mountd can now monitor clients appearing and disappearing in
/proc/fs/nfsd/clients, and will log these events, in liu of the logging
of mount/unmount events for NFSv3.

Currently it cannot distinguish between unconfirmed clients (which might
be transient and totally uninteresting) and confirmed clients.

So add a "status: " line which reports either "confirmed" or
"unconfirmed", and use fsnotify to report that the info file
has been modified.

This requires a bit of infrastructure to keep the dentry for the "info"
file.  There is no need to take a counted reference as the dentry must
remain around until the client is removed.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Note size_t is 32-bit on a 32-bit architecture, but cp_count is defined
by the protocol to be 64 bit, so we could be turning a large copy into a
0-length copy here.

Reported-by: <radchenkoy@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

>From https://tools.ietf.org/html/rfc7862#page-65

	A count of 0 (zero) requests that all bytes from ca_src_offset
	through EOF be copied to the destination.

Reported-by: <radchenkoy@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Trivial fix.

Cc: linux-nfs@vger.kernel.org
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

In order to ensure that knfsd threads don't linger once the nfsd
pseudofs is unmounted (e.g. when the container is killed) we let
nfsd_umount() shut down those threads and wait for them to exit.

This also should ensure that we don't need to do a kernel mount of
the pseudofs, since the thread lifetime is now limited by the
lifetime of the filesystem.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

`printk()`, by default, uses the log level warning, which leaves the
user reading

    NFSD: Using UMH upcall client tracking operations.

wondering what to do about it (`dmesg --level=warn`).

Several client tracking methods are tried, and expected to fail. That’s
why a message is printed only on success. It might be interesting for
users to know the chosen method, so use info-level instead of
debug-level.

Cc: linux-nfs@vger.kernel.org
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

We do this same logic repeatedly, and it's easy to get the sense of the
comparison wrong.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

These are no longer needed because there are no dprintk() call sites
in these files.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Enable watching the progress of directory encoding to capture the
timing of any issues with reading or encoding a directory. The
new tracepoint captures dirent encoding for all NFS versions.

For example, here's what a few NFSv4 directory entries might look
like:

nfsd-989   [002]   468.596265: nfsd_dirent:          fh_hash=0x5d162594 ino=2 name=.
nfsd-989   [002]   468.596267: nfsd_dirent:          fh_hash=0x5d162594 ino=1 name=..
nfsd-989   [002]   468.596299: nfsd_dirent:          fh_hash=0x5d162594 ino=3827 name=zlib.c
nfsd-989   [002]   468.596325: nfsd_dirent:          fh_hash=0x5d162594 ino=3811 name=xdiff
nfsd-989   [002]   468.596351: nfsd_dirent:          fh_hash=0x5d162594 ino=3810 name=xdiff-interface.h
nfsd-989   [002]   468.596377: nfsd_dirent:          fh_hash=0x5d162594 ino=3809 name=xdiff-interface.c
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

The SETACL result encoder is exactly the same as the NFSv2
attrstatres decoder.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Clean up.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Clean up: Counting the bytes used by each returned directory entry
seems less brittle to me than trying to measure consumed pages after
the fact.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Refactor: Add helper function similar to nfs3svc_encode_cookie3().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>