When ops->xmit() fails, drop the packet. Devices which support hardware
ack and retry (which include all devices currently supported by mainline),
will automatically retry sending the packet (in the hardware) up to 3
times, per the 802.15.4 spec.  There is no need, and it is incorrect to
try to do it in mac802154.
Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix to return a negative error code from the error handling
case instead of 0, as returned elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

(Resend with a better changelog)

garp_pdu_queue() should ways be called with this spin lock.
garp_uninit_applicant() only holds rtnl lock which is not
enough here.  A possible race can happen as garp_pdu_rcv()
is called in BH context:

	garp_pdu_rcv()
	  |->garp_pdu_parse_msg()
	    |->garp_pdu_parse_attr()
	      |-> garp_gid_event()

Found by code inspection.

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: David Ward <david.ward@ll.mit.edu>
Cc: "Jorge Boncompte [DTI2]" <jorge@dti2.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds a simple test case that probes the packet socket's
TPACKET_V1, TPACKET_V2 and TPACKET_V3 behavior regarding mmap(2)'ed
I/O for a small burst of 100 packets. The test currently runs for ...

  TPACKET_V1: RX_RING, TX_RING
  TPACKET_V2: RX_RING, TX_RING
  TPACKET_V3: RX_RING

... and will output on success:

  test: TPACKET_V1 with PACKET_RX_RING .................... 100 pkts (9600 bytes)
  test: TPACKET_V1 with PACKET_TX_RING .................... 100 pkts (9600 bytes)
  test: TPACKET_V2 with PACKET_RX_RING .................... 100 pkts (9600 bytes)
  test: TPACKET_V2 with PACKET_TX_RING .................... 100 pkts (9600 bytes)
  test: TPACKET_V3 with PACKET_RX_RING .................... 100 pkts (9600 bytes)
  OK. All tests passed

Reusable parts of psock_fanout.c have been put into a psock_lib.h
file for common usage. Test case successfully tested on x86_64.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch bypasses vxlan encapsulation if the destination vxlan
endpoint is a local device.

Changes since v1: added missing check for vxlan_find_vni() failure
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When our getdcbx entry is called, DCB_CAP_DCBX_HOST should be advertized too.

Cc: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Enable the DCB ETS ops only when supported by the firmware. For older firmware/cards
which don't support ETS, advertize only PFC DCB ops.
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Added readable description for the DPDP and port sensing device capabilities.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the wrapper functions for getting and setting the driver data using
spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we
can directly pass a struct spi_device.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the wrapper functions for getting and setting the driver data using
spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we
can directly pass a struct spi_device.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the wrapper functions for getting and setting the driver data using
spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we
can directly pass a struct spi_device.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the wrapper functions for getting and setting the driver data using
spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we
can directly pass a struct spi_device.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the wrapper functions for getting and setting the driver data using
spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we
can directly pass a struct spi_device.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the wrapper functions for getting and setting the driver data using
spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we
can directly pass a struct spi_device.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the wrapper functions for getting and setting the driver data using
spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we
can directly pass a struct spi_device.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a new chip for RTL8106E series.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The suggestion as following:
- initial settings or default settings
- rtl_hw_start_xxx. rtl_hw_start_xxx may change some default settings.
- enable tx/rx. This has to be after the above two steps.
- rtl_set_rx_mode. AcceptXXXs have to be enabled after enabling tx/rx.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a new chip for RTL8111G series.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

- replace rtl8168g-1.fw with rtl8168g-2.fw which support new method.
- fix PHY power down is useless.
- disable rx early which causes the rx abnormal.
- enable auto fifo.
- set 10M IFG to default value.
- fix the conflict between jumbo frame and flow control.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove useless action PHY_READ_EFUSE, PHY_READ_MAC_BYTE, PHY_WRITE_MAC_BYTE,
PHY_WRITE_ERI_WORD. And define the new action PHY_MDIO_CHG.

PHY_MDIO_CHG is used to modify the mdio operation. By the way, the
firmware could support setting mac ocp.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the new settings and correct the wrong settings.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace the current settings with rtl_writephy and rtl_readphy.
For the hardware, the settings are same with previous ones. This
make the setting method like the previous chips.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some codes are belong to binary codes and should be removed.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
The following patchset contains Netfilter and IPVS updates for
your net-next tree, most relevantly they are:

* Add net namespace support to NFLOG, ULOG and ebt_ulog and NFQUEUE.
  The LOG and ebt_log target has been also adapted, but they still
  depend on the syslog netnamespace that seems to be missing, from
  Gao Feng.

* Don't lose indications of congestion in IPv6 fragmentation handling,
  from Hannes Frederic Sowa.i

* IPVS conversion to use RCU, including some code consolidation patches
  and optimizations, also some from Julian Anastasov.

* cpu fanout support for NFQUEUE, from Holger Eitzenberger.

* Better error reporting to userspace when dropping packets from
  all our _*_[xfrm|route]_me_harder functions, from Patrick McHardy.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This change brings netfilter reassembly logic on par with
reassembly.c. The corresponding change in net-next is
(eec2e618 ipv6: implement RFC3168 5.3 (ecn protection) for
ipv6 fragmentation handling)

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Jesper Dangaard Brouer <jbrouer@redhat.com>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Now that this supports net namespace for nflog and nfqueue,
we can remove the global proc_net_netfilter which has no
clients anymore.

Based on patch from Gao feng.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

This patch makes /proc/net/netfilter/nfnetlink_queue pernet.
Moreover, there's a pernet instance table and lock.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

After this patch, all nf_loggers support net namespace. Still
xt_LOG and ebt_log require syslog netns support.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

This patch makes /proc/net/netfilter/nfnetlink_log pernet.
Moreover, there's a pernet instance table and lock.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Add pernet support to ipt_ULOG by means of the new nf_log_set
function added in (30e0c6a6 netfilter: nf_log: prepare net
namespace support for loggers).

This patch also make ulog_buffers and netlink socket
nflognl per netns.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Add pernet support to ebt_ulog by means of the new nf_log_set
function added in (30e0c6a6 netfilter: nf_log: prepare net
namespace support for loggers).

This patch also make ulog_buffers and netlink socket
ebtulognl per netns.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Add pernet support to xt_LOG by means of the new nf_log_set
function added in (30e0c6a6 netfilter: nf_log: prepare net
namespace support for loggers).

Since syslog ns has yet not been implemented, we don't want
the containers to DDOS host's syslogd. So only enable ebt_log
only from init_net and wait for syslog ns support
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Add pernet support to ebt_log by means of the new nf_log_set
function added in (30e0c6a6 netfilter: nf_log: prepare net
namespace support for loggers).

Since syslog ns has yet not been implemented, we don't want
the containers to DDOS host's syslogd. So only enable ebt_log
only from init_net and wait for syslog ns support.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

This patch adds netns support to nf_log and it prepares netns
support for existing loggers. It is composed of four major
changes.

1) nf_log_register has been split to two functions: nf_log_register
   and nf_log_set. The new nf_log_register is used to globally
   register the nf_logger and nf_log_set is used for enabling
   pernet support from nf_loggers.

   Per netns is not yet complete after this patch, it comes in
   separate follow up patches.

2) Add net as a parameter of nf_log_bind_pf. Per netns is not
   yet complete after this patch, it only allows to bind the
   nf_logger to the protocol family from init_net and it skips
   other cases.

3) Adapt all nf_log_packet callers to pass netns as parameter.
   After this patch, this function only works for init_net.

4) Make the sysctl net/netfilter/nf_log pernet.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

This patch makes this proc dentry pernet. So far only init_net
had a /proc/net/netfilter directory.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

This patch implements per hash bucket locking for the frag queue
hash.  This removes two write locks, and the only remaining write
lock is for protecting hash rebuild.  This essentially reduce the
readers-writer lock to a rebuild lock.

This patch is part of "net: frag performance followup"
 http://thread.gmane.org/gmane.linux.network/263644
of which two patches have already been accepted:

Same test setup as previous:
 (http://thread.gmane.org/gmane.linux.network/257155)
 Two 10G interfaces, on seperate NUMA nodes, are under-test, and uses
 Ethernet flow-control.  A third interface is used for generating the
 DoS attack (with trafgen).

Notice, I have changed the frag DoS generator script to be more
efficient/deadly.  Before it would only hit one RX queue, now its
sending packets causing multi-queue RX, due to "better" RX hashing.

Test types summary (netperf UDP_STREAM):
 Test-20G64K     == 2x10G with 65K fragments
 Test-20G3F      == 2x10G with 3x fragments (3*1472 bytes)
 Test-20G64K+DoS == Same as 20G64K with frag DoS
 Test-20G3F+DoS  == Same as 20G3F  with frag DoS
 Test-20G64K+MQ  == Same as 20G64K with Multi-Queue frag DoS
 Test-20G3F+MQ   == Same as 20G3F  with Multi-Queue frag DoS

When I rebased this-patch(03) (on top of net-next commit a210576c) and
removed the _bh spinlock, I saw a performance regression.  BUT this
was caused by some unrelated change in-between.  See tests below.

Test (A) is what I reported before for patch-02, accepted in commit 1b5ab0de.
Test (B) verifying-retest of commit 1b5ab0de corrospond to patch-02.
Test (C) is what I reported before for this-patch

Test (D) is net-next master HEAD (commit a210576c), which reveals some
(unknown) performance regression (compared against test (B)).
Test (D) function as a new base-test.

Performance table summary (in Mbit/s):

(#) Test-type:  20G64K    20G3F    20G64K+DoS  20G3F+DoS  20G64K+MQ 20G3F+MQ
    ----------  -------   -------  ----------  ---------  --------  -------
(A) Patch-02  : 18848.7   13230.1   4103.04     5310.36     130.0    440.2
(B) 1b5ab0de  : 18841.5   13156.8   4101.08     5314.57     129.0    424.2
(C) Patch-03v1: 18838.0   13490.5   4405.11     6814.72     196.6    461.6

(D) a210576c  : 18321.5   11250.4   3635.34     5160.13     119.1    405.2
(E) with _bh  : 17247.3   11492.6   3994.74     6405.29     166.7    413.6
(F) without bh: 17471.3   11298.7   3818.05     6102.11     165.7    406.3

Test (E) and (F) is this-patch(03), with(V1) and without(V2) the _bh spinlocks.

I cannot explain the slow down for 20G64K (but its an artificial
"lab-test" so I'm not worried).  But the other results does show
improvements.  And test (E) "with _bh" version is slightly better.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Eric Dumazet <edumazet@google.com>

----
V2:
- By analysis from Hannes Frederic Sowa and Eric Dumazet, we don't
  need the spinlock _bh versions, as Netfilter currently does a
  local_bh_disable() before entering inet_fragment.
- Fold-in desc from cover-mail
V3:
- Drop the chain_len counter per hash bucket.
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull net into net-next to get the synchronize_net() bug fix in
bonding.
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) Fix VSOCK layer handling of context ID changes, from Reilly Grant.

 2) Now that we have a synchronize_net() in netdev_rx_handler_unregister(),
    we can't let any call sites hold locks.  Unfortunately bonding does,
    so we have to drop the rwlock there a little bit earlier, fix from
    Veaceslav Falico.

 3) MAC address setting loop exits one iteration too early in mlx4
    driver, from Yan Burman.

 4) Restore ipv6 routes properly upon ifdown/ifup of loopback, from
    Balakumaran Kannan.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  VSOCK: Handle changes to the VMCI context ID.
  net IPv6 : Fix broken IPv6 routing table after loopback down-up
  cbq: incorrect processing of high limits
  net/mlx4_en: Fix setting initial MAC address
  bonding: get netdev_rx_handler_unregister out of locks

Pull regmap fixes from Mark Brown:
 "A small collection of fixes.  The most important ones are those from
  Stephen and Lars-Peter both of which fix cache issues that have been
  lurking for a while but not manifesting noticably enough for anyone to
  report them."

* tag 'regmap-v3.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: async: Add missing return
  regmap: don't corrupt work buffer in _regmap_raw_write()
  regmap: cache Fix regcache-rbtree sync
  regmap: Initialize `map->debugfs' before regcache

Pull DRM fixes from Dave Airlie:
 "Two core fixes, both regressions, along with some intel and some
  nouveau fixes for regressions and oopses"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm: correctly restore mappings if drm_open fails
  drm/nouveau: fix NULL ptr dereference from nv50_disp_intr()
  drm/nouveau: fix handling empty channel list in ioctl's
  drm: don't unlock in the addfb error paths
  drm/i915: Fix build failure
  drm/i915: Be sure to turn hsync/vsync back on at crt enable (v2)
  drm/i915: duct-tape locking when eDP init fails