- 29 Aug, 2017 5 commits
-
-
Ben Hutchings authored
The block core requests modules with the "-iosched" name suffix, but mq-deadline does not have that suffix. Add an alias. Fixes: 945ffb60 ("mq-deadline: add blk-mq adaptation of the deadline ...") Reviewed-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Ben Hutchings authored
The block core requests modules with the "-iosched" name suffix, but bfq no longer has that suffix. Add an alias. Fixes: ea25da48 ("block, bfq: split bfq-iosched.c into multiple ...") Reviewed-by:
-
Damien Le Moal authored
The only caller of this function is blk_start_request() in the same file. Fix blk_start_request() description accordingly. Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
-
Bart Van Assche authored
Since blk_mq_init_queue() initializes .nr_requests to the tag set size and since that value is a good default for the skd driver, do not overwrite the value set by blk_mq_init_queue(). This change doubles the default value of .nr_requests. Signed-off-by:
-
Bart Van Assche authored
Since sTec s1120 devices support 64-bit DMA it is not necessary to request data buffer bouncing. Hence remove the blk_queue_bounce_limit() call. Suggested-by:
-
- 28 Aug, 2017 5 commits
-
-
Bhumika Goyal authored
Make this const as is is only passed as an argument to the function device_create_file and device_remove_file and the corresponding arguments are of type const. Done using Coccinelle Signed-off-by:
Bhumika Goyal <bhumirks@gmail.com> Signed-off-by:
-
Jens Axboe authored
We already have this pointer, no need to use to_nullb_device() again. Signed-off-by: -
Shaohua Li authored
Commit 2984c868(nullb: factor disk parameters) has a typo. The nullb_device allocation/free is done outside of null_add_dev. The commit accidentally frees the nullb_device in error code path. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
David Jeffery authored
There is a race between changing I/O elevator and request_queue removal which can trigger the warning in kobject_add_internal. A program can use sysfs to request a change of elevator at the same time another task is unregistering the request_queue the elevator would be attached to. The elevator's kobject will then attempt to be connected to the request_queue in the object tree when the request_queue has just been removed from sysfs. This triggers the warning in kobject_add_internal as the request_queue no longer has a sysfs directory: kobject_add_internal failed for iosched (error: -2 parent: queue) ------------[ cut here ]------------ WARNING: CPU: 3 PID: 14075 at lib/kobject.c:244 kobject_add_internal+0x103/0x2d0 To fix this warning, we can check the QUEUE_FLAG_REGISTERED flag when changing the elevator and use the request_queue's sysfs_lock to serialize between clearing the flag and the elevator testing the flag. Signed-off-by:
David Jeffery <djeffery@redhat.com> Tested-by:
-
weiping zhang authored
The last parameter "count" never be used in xxx_var_store, convert these functions to void. Signed-off-by:
weiping zhang <zhangweiping@didichuxing.com> Signed-off-by:
-
- 25 Aug, 2017 8 commits
-
-
Bart Van Assche authored
The SKD_ID_INCR flag in skd_request_context.id duplicates information that is already available otherwise, e.g. through the block layer request state and through skd_request_context.state. Hence remove the code that manipulates this flag and also the flag itself. Since skd_isr_completion_posted() only uses the lower bits of skd_request_context.id as hardware tag, this patch does not change the behavior of the skd driver. I'm referring to the following code: tag = req_id & SKD_ID_SLOT_AND_TABLE_MASK; Signed-off-by: -
Bart Van Assche authored
Although it is easy to see that skdev->disk != NULL if skdev->queue != NULL, add a test for skdev->disk to avoid that smatch reports the following warning: drivers/block/skd_main.c:3080 skd_free_disk() error: we previously assumed 'disk' could be null (see line 3074) Reported-by: -
Bart Van Assche authored
It is not worth to keep the debug statements in skd_end_request(). Without debug statements that function only consists of two statements. Hence inline skd_end_request(). Suggested-by:
-
Bart Van Assche authored
The latter name follows more closely the function names used in other blk-mq drivers. Suggested-by:
-
Shaohua Li authored
Dan reported this: The patch 2984c868: "nullb: factor disk parameters" from Aug 14, 2017, leads to the following Smatch complaint: drivers/block/null_blk.c:1759 null_init_tag_set() error: we previously assumed 'nullb' could be null (see line 1750) 1755 set->cmd_size = sizeof(struct nullb_cmd); 1756 set->flags = BLK_MQ_F_SHOULD_MERGE; 1757 set->driver_data = NULL; 1758 1759 if (nullb->dev->blocking) ^^^^^^^^^^^^^^^^^^^^ And an unchecked dereference. nullb could be NULL here. Reported-by:
-
weiping zhang authored
this patch fix two errors, firstly avoid kfree blk_root, secondly not free(blkcg) ,if blkcg alloc fail(blkcg == NULL), just unlock that mutex; Signed-off-by:
-
Jens Axboe authored
Update to a working one, the fusionio address hasn't been valid in 4 years. Signed-off-by: -
Omar Sandoval authored
Normally I wouldn't bother with this, but in my opinion the comments are the most important part of this whole file since without them no one would have any clue how this insanity works. Signed-off-by:
Omar Sandoval <osandov@fb.com> Signed-off-by:
-
- 24 Aug, 2017 3 commits
-
-
Bart Van Assche authored
This patch avoids that sparse reports the following warning messages: block/compat_ioctl.c:85:11: warning: incorrect type in assignment (different address spaces) block/compat_ioctl.c:85:11: expected unsigned long *[noderef] <asn:1>p block/compat_ioctl.c:85:11: got void [noderef] <asn:1>* block/compat_ioctl.c:91:21: warning: incorrect type in argument 1 (different address spaces) block/compat_ioctl.c:91:21: expected void const volatile [noderef] <asn:1>*<noident> block/compat_ioctl.c:91:21: got unsigned long *[noderef] <asn:1>p block/compat_ioctl.c:87:53: warning: dereference of noderef expression block/compat_ioctl.c:91:21: warning: dereference of noderef expression Fixes: commit d597580d ("generic ...copy_..._user primitives") Signed-off-by:
-
weiping zhang authored
put_device(pdev) will call pdev->type->release finally, and blk_free_devt has been called in part_release(), so remove it. Signed-off-by:
-
Milan Broz authored
In dm-integrity target we register integrity profile that have both generate_fn and verify_fn callbacks set to NULL. This is used if dm-integrity is stacked under a dm-crypt device for authenticated encryption (integrity payload contains authentication tag and IV seed). In this case the verification is done through own crypto API processing inside dm-crypt; integrity profile is only holder of these data. (And memory is owned by dm-crypt as well.) After the commit (and previous changes) Commit 7c20f116 Author: Christoph Hellwig <hch@lst.de> Date: Mon Jul 3 16:58:43 2017 -0600 bio-integrity: stop abusing bi_end_io we get this crash: : BUG: unable to handle kernel NULL pointer dereference at (null) : IP: (null) : *pde = 00000000 ... : : Workqueue: kintegrityd bio_integrity_verify_fn : task: f48ae180 task.stack: f4b5c000 : EIP: (null) : EFLAGS: 00210286 CPU: 0 : EAX: f4b5debc EBX: 00001000 ECX: 00000001 EDX: 00000000 : ESI: 00001000 EDI: ed25f000 EBP: f4b5dee8 ESP: f4b5dea4 : DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 : CR0: 80050033 CR2: 00000000 CR3: 32823000 CR4: 001406d0 : Call Trace: : ? bio_integrity_process+0xe3/0x1e0 : bio_integrity_verify_fn+0xea/0x150 : process_one_work+0x1c7/0x5c0 : worker_thread+0x39/0x380 : kthread+0xd6/0x110 : ? process_one_work+0x5c0/0x5c0 : ? kthread_worker_fn+0x100/0x100 : ? kthread_worker_fn+0x100/0x100 : ret_from_fork+0x19/0x24 : Code: Bad EIP value. : EIP: (null) SS:ESP: 0068:f4b5dea4 : CR2: 0000000000000000 Patch just skip the whole verify workqueue if verify_fn is set to NULL. Fixes: 7c20f116 ("bio-integrity: stop abusing bi_end_io") Signed-off-by:
Milan Broz <gmazyland@gmail.com> [hch: trivial whitespace fix] Signed-off-by:
-
- 23 Aug, 2017 19 commits
-
-
weiping zhang authored
if elv_register fail, bfq_pool should be free. Signed-off-by:
-
Christoph Hellwig authored
This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
This helper allows looking up a partion under RCU protection without grabbing a reference to it. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
The block layer always remaps partitions before calling into the ->make_request methods of drivers. Thus the call to get_start_sect in in_chunk_boundary will always return 0 and can be removed. Reviewed-by:
-
Christoph Hellwig authored
We won't have the struct block_device available in the bio soon, so switch to the numerical dev_t instead of the block_device pointer for looking up the check-integrity state. Reviewed-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
-
Bart Van Assche authored
Since MSI support on some motherboards is unreliable, change the default interrupt mode from MSI to MSI-X. This patch avoids that the following message appears sporadially in the kernel logs of my test setup: do_IRQ: 3.193 No irq handler for vector Signed-off-by:
-
Bart Van Assche authored
Avoid that normal request completion and the timeout handler can run concurrently by calling blk_mq_complete_request() instead of blk_mq_end_request() from skd_end_request(). Avoid that the block layer can reuse a request while the firmware is still processing it. Convert skd_softirq_done() to blk-mq. Pass the pointer to skd_softirq_done() to the block layer core through blk_mq_ops.complete instead of by calling blk_queue_softirq_done(). Pass the pointer to skd_timed_out() to the block layer core through blk_mq_ops.timeout instead of by calling blk_queue_timed_out(). The timeout handler has been tested as follows: echo 1 > /sys/block/skd0/io-timeout-fail && (cd /sys/kernel/debug/fail_io_timeout && echo 100 > probability && echo N > task-filter && echo 1 > times) Fixes: commit a74d5b76 ("skd: Switch to block layer timeout mechanism") Reported-by: -
Bart Van Assche authored
This patch does not change any functionality but makes the skd driver code more similar to that of other blk-mq kernel drivers. Signed-off-by:
-
Bart Van Assche authored
This patch removes one debug statement but otherwise does not change any functionality. Signed-off-by:
-
Bart Van Assche authored
The timeout handler set by blk_queue_rq_timed_out() is only used in single queue mode. Calling this function for blk-mq drivers is wrong. Hence issue a warning if this function is called by a blk-mq driver. Signed-off-by:
-
Shaohua Li authored
Sometime disk could have tracks broken and data there is inaccessable, but data in other parts can be accessed in normal way. MD RAID supports such disks. But we don't have a good way to test it, because we can't control which part of a physical disk is bad. For a virtual disk, this can be easily controlled. This patch adds a new 'badblock' attribute. Configure it in this way: echo "+1-100" > xxx/badblock, this will make sector [1-100] as bad blocks. echo "-20-30" > xxx/badblock, this will make sector [20-30] good If badblocks are accessed, the nullb disk will return IO error. Other parts of the disk can accessed in normal way. Signed-off-by:
-
Shaohua Li authored
Software must flush disk cache to guarantee data safety. To check if software correctly does disk cache flush, we must know the behavior of disk. But physical disk behavior is uncontrollable. Even software doesn't do the flush, the disk probably does the flush. This patch tries to emulate a cache in the test disk. All write will go to a cache first, when the cache is full, we then flush some data to disk storage. A flush request will flush all data of the cache to disk storage. A FUA write will write to memory store directly and revalidate data in cache. If there is a power failure (by writing to power attribute, 'echo 0 > disk_name/power'), we discard all data in the cache, but preserve the data in disk storage. Later we can power on the disk again as usual (write 1 to 'power' attribute), then we can check data integrity and very if software does everything correctly. A new attribute 'cache_size' (in MB) is added to configure cache size. Based on original patch from Kyungchan Koh Signed-off-by:
Kyungchan Koh <kkc6196@fb.com> Signed-off-by:
-
Shaohua Li authored
In test, we usually expect controllable disk speed. For example, in a raid array, we'd like some disks are fast and some are slow. MD RAID actually has a feature for this. To test the feature, we'd like to make the disk run in specific speed. block throttling probably can be used for this purpose, but it requires cgroup setup. Here we just implement a simple throttling mechanism in the driver. There is slight fluctuation in the mechanism, but it's good enough for test. To configure the bandwidth cap, user sets the 'mbps' attribute. mbps is MB/s. Based on original patch from Kyungchan Koh Signed-off-by:
-
Shaohua Li authored
discard makes sense for memory backed disk. And also it's useful to test if upper layer supports dicard correctly. User configures 'discard' attribute to enable/disable dicard support. Based on original patch from Kyungchan Koh Signed-off-by:
-
Shaohua Li authored
This adds memory backed store in nullb. User configure 'memory_backed' attribute for this. By default, nullb disk doesn't use memory backed store. Based on original patch from Kyungchan Koh Signed-off-by:
-
Shaohua Li authored
We now dynamically create disks. Managing the disk index with ida to avoid bump up the index too much. Signed-off-by:
-
Shaohua Li authored
The device created in nullb configfs interface isn't power on by default. After user configures the device, user can do 'echo 1 > xxx/nullb/device_name/power' to power on the device, which will create a disk. the xxx/nullb/device_name/index is the disk index, so if the index is 2, the new created disk should be named as /dev/nullb2. Note, the 'index' is only valid after disk is power on. 'echo 0 > xxx/nullb/device_name/power' will remove the disk. Note, this doesn't remove the device. To remove the device, user should do 'rmdir xxx/nullb/device_name'. Removing the device will remove the disk too. Signed-off-by:
-
