This commits adds a document that explains how to test BPF in an s390
QEMU guest.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191029172916.36528-1-iii@linux.ibm.com

There are tests for full and narrows loads from bpf_sysctl.file_pos, but
for bpf_sysctl.write only full load is tested. Add the missing test.
Suggested-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrey Ignatov <rdna@fb.com>
Link: https://lore.kernel.org/bpf/20191029143027.28681-1-iii@linux.ibm.com

The return value of raw_tp programs is ignored by __bpf_trace_run()
that calls them. The verifier also allows any value to be returned.
For BTF-enabled raw_tp lets enforce 'return 0', so that return value
can be used for something in the future.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191029032426.1206762-1-ast@kernel.org

u32 is a kernel-side typedef. User-space library is supposed to use __u32.
This breaks Github's projection of libbpf. Do u32 -> __u32 fix.

Fixes: 94ff9ebb ("libbpf: Fix compatibility for kernels without need_wakeup")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Cc: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20191029055953.2461336-1-andriin@fb.com

libbpf's bpf_object__elf_collect() does simple sanity check after iterating
over all ELF sections, if checks that .strtab index is correct. Unfortunately,
due to section indices being 1-based, the check breaks for cases when .strtab
ends up being the very last section in ELF.

Fixes: 77ba9a5b ("tools lib bpf: Fetch map names from correct strtab")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191028233727.1286699-1-andriin@fb.com

When the need_wakeup flag was added to AF_XDP, the format of the
XDP_MMAP_OFFSETS getsockopt was extended. Code was added to the
kernel to take care of compatibility issues arrising from running
applications using any of the two formats. However, libbpf was
not extended to take care of the case when the application/libbpf
uses the new format but the kernel only supports the old
format. This patch adds support in libbpf for parsing the old
format, before the need_wakeup flag was added, and emulating a
set of static need_wakeup flags that will always work for the
application.

v2 -> v3:
* Incorporated code improvements suggested by Jonathan Lemon

v1 -> v2:
* Rebased to bpf-next
* Rewrote the code as the previous version made you blind

Fixes: a4500432 ("libbpf: add support for need_wakeup flag in AF_XDP part")
Reported-by: Eloy Degen <degeneloy@gmail.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/bpf/1571995035-21889-1-git-send-email-magnus.karlsson@intel.com

`make O=/linux-build kselftest TARGETS=bpf` fails with

	make[3]: *** No rule to make target '/linux-build/bpf/test_stub.o', needed by '/linux-build/bpf/test_verifier'

The same command without the O= part works, presumably thanks to the
implicit rule.

Fix by restoring the explicit $(OUTPUT)/test_stub.o rule.

Fixes: 74b5a596 ("selftests/bpf: Replace test_progs and test_maps w/ general rule")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191028102110.7545-1-iii@linux.ibm.com

When cross-compiling tests from x86 to s390, the resulting BPF objects
fail to load due to endianness mismatch.

Fix by using BPF-GCC endianness check for clang as well.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191028102049.7489-1-iii@linux.ibm.com

Daniel Borkmann says:

====================
pull-request: bpf-next 2019-10-27

The following pull-request contains BPF updates for your *net-next* tree.

We've added 52 non-merge commits during the last 11 day(s) which contain
a total of 65 files changed, 2604 insertions(+), 1100 deletions(-).

The main changes are:

 1) Revolutionize BPF tracing by using in-kernel BTF to type check BPF
    assembly code. The work here teaches BPF verifier to recognize
    kfree_skb()'s first argument as 'struct sk_buff *' in tracepoints
    such that verifier allows direct use of bpf_skb_event_output() helper
    used in tc BPF et al (w/o probing memory access) that dumps skb data
    into perf ring buffer. Also add direct loads to probe memory in order
    to speed up/replace bpf_probe_read() calls, from Alexei Starovoitov.

 2) Big batch of changes to improve libbpf and BPF kselftests. Besides
    others: generalization of libbpf's CO-RE relocation support to now
    also include field existence relocations, revamp the BPF kselftest
    Makefile to add test runner concept allowing to exercise various
    ways to build BPF programs, and teach bpf_object__open() and friends
    to automatically derive BPF program type/expected attach type from
    section names to ease their use, from Andrii Nakryiko.

 3) Fix deadlock in stackmap's build-id lookup on rq_lock(), from Song Liu.

 4) Allow to read BTF as raw data from bpftool. Most notable use case
    is to dump /sys/kernel/btf/vmlinux through this, from Jiri Olsa.

 5) Use bpf_redirect_map() helper in libbpf's AF_XDP helper prog which
    manages to improve "rx_drop" performance by ~4%., from Björn Töpel.

 6) Fix to restore the flow dissector after reattach BPF test and also
    fix error handling in bpf_helper_defs.h generation, from Jakub Sitnicki.

 7) Improve verifier's BTF ctx access for use outside of raw_tp, from
    Martin KaFai Lau.

 8) Improve documentation for AF_XDP with new sections and to reflect
    latest features, from Magnus Karlsson.

 9) Add back 'version' section parsing to libbpf for old kernels, from
    John Fastabend.

10) Fix strncat bounds error in libbpf's libbpf_prog_type_by_name(),
    from KP Singh.

11) Turn on -mattr=+alu32 in LLVM by default for BPF kselftests in order
    to improve insn coverage for built BPF progs, from Yonghong Song.

12) Misc minor cleanups and fixes, from various others.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Updated config with required kernel options for conntrac TC action,
so that tdc can run the tests.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter/IPVS updates for net-next

The following patchset contains Netfilter/IPVS updates for net-next,
more specifically:

* Updates for ipset:

1) Coding style fix for ipset comment extension, from Jeremy Sowden.

2) De-inline many functions in ipset, from Jeremy Sowden.

3) Move ipset function definition from header to source file.

4) Move ip_set_put_flags() to source, export it as a symbol, remove
   inline.

5) Move range_to_mask() to the source file where this is used.

6) Move ip_set_get_ip_port() to the source file where this is used.

* IPVS selftests and netns improvements:

7) Two patches to speedup ipvs netns dismantle, from Haishuang Yan.

8) Three patches to add selftest script for ipvs, also from
   Haishuang Yan.

* Conntrack updates and new nf_hook_slow_list() function:

9) Document ct ecache extension, from Florian Westphal.

10) Skip ct extensions from ctnetlink dump, from Florian.

11) Free ct extension immediately, from Florian.

12) Skip access to ecache extension from nf_ct_deliver_cached_events()
    this is not correct as reported by Syzbot.

13) Add and use nf_hook_slow_list(), from Florian.

* Flowtable infrastructure updates:

14) Move priority to nf_flowtable definition.

15) Dynamic allocation of per-device hooks in flowtables.

16) Allow to include netdevice only once in flowtable definitions.

17) Rise maximum number of devices per flowtable.

* Netfilter hardware offload infrastructure updates:

18) Add nft_flow_block_chain() helper function.

19) Pass callback list to nft_setup_cb_call().

20) Add nft_flow_cls_offload_setup() helper function.

21) Remove rules for the unregistered device via netdevice event.

22) Support for multiple devices in a basechain definition at the
    ingress hook.

22) Add nft_chain_offload_cmd() helper function.

23) Add nft_flow_block_offload_init() helper function.

24) Rewind in case of failing to bind multiple devices to hook.

25) Typo in IPv6 tproxy module description, from Norman Rasmussen.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Igor Russkikh says:

====================
net: aquantia: ptp followup fixes

Here are two sparse warnings, third patch is a fix for
scaled_ppm_to_ppb missing. Eventually I reworked this
to exclude ptp module from build. Please consider it instead
of this patch: https://patchwork.ozlabs.org/patch/1184171/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

We do disable aq_ptp module build using inline
stubs when CONFIG_PTP_1588_CLOCK is not declared.

This reduces module size and removes unnecessary code.
Reported-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

fixes to remove sparse warnings:
sparse: sparse: cast to restricted __be64

Fixes: 04a18399 ("net: aquantia: implement data PTP datapath")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

found by sparse, simply useless local initialization with zero.

Fixes: 94ad9455 ("net: aquantia: add PTP rings infrastructure")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nft_flow_block_chain() needs to unbind in case of error when performing
the multi-device binding.

Fixes: d54725cd ("netfilter: nf_tables: support for multiple devices per netdev hook")
Reported-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

This patch adds the nft_flow_block_offload_init() helper function to
initialize the flow_block_offload object.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

This patch adds the nft_chain_offload_cmd() helper function.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

syzbot reported following splat:
BUG: KASAN: use-after-free in __nf_ct_ext_exist
include/net/netfilter/nf_conntrack_extend.h:53 [inline]
BUG: KASAN: use-after-free in nf_ct_deliver_cached_events+0x5c3/0x6d0
net/netfilter/nf_conntrack_ecache.c:205
nf_conntrack_confirm include/net/netfilter/nf_conntrack_core.h:65 [inline]
nf_confirm+0x3d8/0x4d0 net/netfilter/nf_conntrack_proto.c:154
[..]

While there is no reproducer yet, the syzbot report contains one
interesting bit of information:

Freed by task 27585:
[..]
 kfree+0x10a/0x2c0 mm/slab.c:3757
 nf_ct_ext_destroy+0x2ab/0x2e0 net/netfilter/nf_conntrack_extend.c:38
 nf_conntrack_free+0x8f/0xe0 net/netfilter/nf_conntrack_core.c:1418
 destroy_conntrack+0x1a2/0x270 net/netfilter/nf_conntrack_core.c:626
 nf_conntrack_put include/linux/netfilter/nf_conntrack_common.h:31 [inline]
 nf_ct_resolve_clash net/netfilter/nf_conntrack_core.c:915 [inline]
 ^^^^^^^^^^^^^^^^^^^
 __nf_conntrack_confirm+0x21ca/0x2830 net/netfilter/nf_conntrack_core.c:1038
 nf_conntrack_confirm include/net/netfilter/nf_conntrack_core.h:63 [inline]
 nf_confirm+0x3e7/0x4d0 net/netfilter/nf_conntrack_proto.c:154

This is whats happening:

1. a conntrack entry is about to be confirmed (added to hash table).
2. a clash with existing entry is detected.
3. nf_ct_resolve_clash() puts skb->nfct (the "losing" entry).
4. this entry now has a refcount of 0 and is freed to SLAB_TYPESAFE_BY_RCU
   kmem cache.

skb->nfct has been replaced by the one found in the hash.
Problem is that nf_conntrack_confirm() uses the old ct:

static inline int nf_conntrack_confirm(struct sk_buff *skb)
{
 struct nf_conn *ct = (struct nf_conn *)skb_nfct(skb);
 int ret = NF_ACCEPT;

  if (ct) {
    if (!nf_ct_is_confirmed(ct))
       ret = __nf_conntrack_confirm(skb);
    if (likely(ret == NF_ACCEPT))
	nf_ct_deliver_cached_events(ct); /* This ct has refcount 0! */
  }
  return ret;
}

As of "netfilter: conntrack: free extension area immediately", we can't
access conntrack extensions in this case.

To fix this, make sure we check the dying bit presence before attempting
to get the eache extension.

Reported-by: syzbot+c7aabc9fe93e7f3637ba@syzkaller.appspotmail.com
Fixes: 2ad9d774 ("netfilter: conntrack: free extension area immediately")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Shannon Nelson says:

====================
ionic updates

These are a few of the driver updates we've been working on internally.
These clean up a few mismatched struct comments, add checking for dead
firmware, fix an initialization bug, and change the Rx buffer management.

These are based on net-next v5.4-rc3-709-g985fd98a.

v2: clear napi->skb in the error case in ionic_rx_frags()
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Even out Rx performance across MTU sizes by changing from full
skb allocations to page-based frag allocations.  The device
supports a form of scatter-gather in the Rx path, so we can
set up a number of pages for each descriptor, all of which are
easier to alloc and pass around than the standard kzalloc'd
buffer.  An skb is wrapped around the pages while processing
the received packets, and pages are recycled as needed, or
left alone if they weren't used in the Rx.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a watchdog to periodically monitor the NIC heartbeat.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Most of our firmware has a heartbeat feature that the driver
can watch for to see if the FW is still alive and likely to
answer a dev_cmd or AdminQ request.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the initial interrupt coalesce usec-to-hw setting
to actually be usec-to-hw.

Fixes: 780eded3 ("ionic: report users coalesce request")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix up struct names in the ionic_if.h comments
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

We have only one user of the error path, so we can inline it.
In addition the call to rtl8169_make_unusable_by_asic() can be removed
because rtl8169_alloc_rx_data() didn't call rtl8169_mark_to_asic() yet
for the respective index if returning NULL.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch aligns the fix_features callback with the vendor driver and
also disables IPv6 HW checksumming and TSO if jumbo packets are used
on RTL8101/RTL8168/RTL8125.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2019-10-23

Here's the main bluetooth-next pull request for the 5.5 kernel:

 - Multiple fixes to hci_qca driver
 - Fix for HCI_USER_CHANNEL initialization
 - btwlink: drop superseded driver
 - Add support for Intel FW download error recovery
 - Various other smaller fixes & improvements

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The TCPI_OPT_SYN_DATA bit as part of tcpi_options currently reports whether
or not data-in-SYN was ack'd on both the client and server side. We'd like
to gather more information on the client-side in the failure case in order
to indicate the reason for the failure. This can be useful for not only
debugging TFO, but also for creating TFO socket policies. For example, if
a middle box removes the TFO option or drops a data-in-SYN, we can
can detect this case, and turn off TFO for these connections saving the
extra retransmits.

The newly added tcpi_fastopen_client_fail status is 2 bits and has the
following 4 states:

1) TFO_STATUS_UNSPEC

Catch-all state which includes when TFO is disabled via black hole
detection, which is indicated via LINUX_MIB_TCPFASTOPENBLACKHOLE.

2) TFO_COOKIE_UNAVAILABLE

If TFO_CLIENT_NO_COOKIE mode is off, this state indicates that no cookie
is available in the cache.

3) TFO_DATA_NOT_ACKED

Data was sent with SYN, we received a SYN/ACK but it did not cover the data
portion. Cookie is not accepted by server because the cookie may be invalid
or the server may be overloaded.

4) TFO_SYN_RETRANSMITTED

Data was sent with SYN, we received a SYN/ACK which did not cover the data
after at least 1 additional SYN was sent (without data). It may be the case
that a middle-box is dropping data-in-SYN packets. Thus, it would be more
efficient to not use TFO on this connection to avoid extra retransmits
during connection establishment.

These new fields do not cover all the cases where TFO may fail, but other
failures, such as SYN/ACK + data being dropped, will result in the
connection not becoming established. And a connection blackhole after
session establishment shows up as a stalled connection.
Signed-off-by: Jason Baron <jbaron@akamai.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Christoph Paasch <cpaasch@apple.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Grygorii Strashko says:

====================
net: phy: dp83867: enable robust auto-mdix

Patch 1 - improves link detection when dp83867 PHY is configured in manual mode
by enabling CFG3[9] Robust Auto-MDIX option.

Patch 2 - is minor optimization.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Move DT parsing code to probe dp83867_probe() as it's one time operation.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The link detection timeouts can be observed (or link might not be detected
at all) when dp83867 PHY is configured in manual mode (speed/duplex).

CFG3[9] Robust Auto-MDIX option allows to significantly improve link detection
in case dp83867 is configured in manual mode and reduce link detection
time.
As per DM: "If link partners are configured to operational modes that are
not supported by normal Auto MDI/MDIX mode (like Auto-Neg versus Force
100Base-TX or Force 100Base-TX versus Force 100Base-TX), this Robust Auto
MDI/MDIX mode allows MDI/MDIX resolution and prevents deadlock."

Hence, enable this option by default as there are no known reasons
not to do so.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is networking hardware that isn't based on Ethernet for layers 1 and 2.

For example CAN.

CAN is a multi-master serial bus standard for connecting Electronic Control
Units [ECUs] also known as nodes. A frame on the CAN bus carries up to 8 bytes
of payload. Frame corruption is detected by a CRC. However frame loss due to
corruption is possible, but a quite unusual phenomenon.

While fq_codel works great for TCP/IP, it doesn't for CAN. There are a lot of
legacy protocols on top of CAN, which are not build with flow control or high
CAN frame drop rates in mind.

When using fq_codel, as soon as the queue reaches a certain delay based length,
skbs from the head of the queue are silently dropped. Silently meaning that the
user space using a send() or similar syscall doesn't get an error. However
TCP's flow control algorithm will detect dropped packages and adjust the
bandwidth accordingly.

When using fq_codel and sending raw frames over CAN, which is the common use
case, the user space thinks the package has been sent without problems, because
send() returned without an error. pfifo_fast will drop skbs, if the queue
length exceeds the maximum. But with this scheduler the skbs at the tail are
dropped, an error (-ENOBUFS) is propagated to user space. So that the user
space can slow down the package generation.

On distributions, where fq_codel is made default via CONFIG_DEFAULT_NET_SCH
during compile time, or set default during runtime with sysctl
net.core.default_qdisc (see [1]), we get a bad user experience. In my test case
with pfifo_fast, I can transfer thousands of million CAN frames without a frame
drop. On the other hand with fq_codel there is more then one lost CAN frame per
thousand frames.

As pointed out fq_codel is not suited for CAN hardware, so this patch changes
attach_one_default_qdisc() to use pfifo_fast for "ARPHRD_CAN" network devices.

During transition of a netdev from down to up state the default queuing
discipline is attached by attach_default_qdiscs() with the help of
attach_one_default_qdisc(). This patch modifies attach_one_default_qdisc() to
attach the pfifo_fast (pfifo_fast_ops) if the network device type is
"ARPHRD_CAN".

[1] https://github.com/systemd/systemd/issues/9194Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Vincent Prince <vincent.prince.fr@gmail.com>
Acked-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the pointer rtl_fw->fw would be used before checking in
rtl8152_apply_firmware() that causes the following kernel oops.

Unable to handle kernel NULL pointer dereference at virtual address 00000002
pgd = (ptrval)
[00000002] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 131 Comm: kworker/0:2 Not tainted
5.4.0-rc1-00539-g9370f2d0 #6788
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
Workqueue: events_long rtl_hw_phy_work_func_t
PC is at rtl8152_apply_firmware+0x14/0x464
LR is at r8153_hw_phy_cfg+0x24/0x17c
pc : [<c064f4e4>]    lr : [<c064fa18>]    psr: a0000013
sp : e75c9e60  ip : 60000013  fp : c11b7614
r10: e883b91c  r9 : 00000000  r8 : fffffffe
r7 : e883b640  r6 : fffffffe  r5 : fffffffe  r4 : e883b640
r3 : 736cfe7c  r2 : 736cfe7c  r1 : 000052f8  r0 : e883b640
Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
Control: 10c5387d  Table: 6640006a  DAC: 00000051
Process kworker/0:2 (pid: 131, stack limit = 0x(ptrval))
Stack: (0xe75c9e60 to 0xe75ca000)
...
[<c064f4e4>] (rtl8152_apply_firmware) from [<c064fa18>]
(r8153_hw_phy_cfg+0x24/0x17c)
[<c064fa18>] (r8153_hw_phy_cfg) from [<c064e784>]
(rtl_hw_phy_work_func_t+0x220/0x3e4)
[<c064e784>] (rtl_hw_phy_work_func_t) from [<c0148a74>]
(process_one_work+0x22c/0x7c8)
[<c0148a74>] (process_one_work) from [<c0149054>] (worker_thread+0x44/0x520)
[<c0149054>] (worker_thread) from [<c0150548>] (kthread+0x130/0x164)
[<c0150548>] (kthread) from [<c01010b4>] (ret_from_fork+0x14/0x20)
Exception stack(0xe75c9fb0 to 0xe75c9ff8)
...

Fixes: 9370f2d0 ("r8152: support request_firmware for RTL8153")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When switching to alu32 by default, no_alu32/ subdirectory wasn't added
to .gitignore. Fix it.

Fixes: e13a2fe6 ("tools/bpf: Turn on llvm alu32 attribute by default")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20191025045503.3043427-1-andriin@fb.com

The bpftool interface stays the same, but now it's possible
to run it over BTF raw data, like:

  $ bpftool btf dump file /sys/kernel/btf/vmlinux
  [1] INT '(anon)' size=4 bits_offset=0 nr_bits=32 encoding=(none)
  [2] INT 'long unsigned int' size=8 bits_offset=0 nr_bits=64 encoding=(none)
  [3] CONST '(anon)' type_id=2
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Link: https://lore.kernel.org/bpf/20191024133025.10691-1-jolsa@kernel.org

This patch makes a few changes to btf_ctx_access() to prepare
it for non raw_tp use case where the attach_btf_id is not
necessary a BTF_KIND_TYPEDEF.

It moves the "btf_trace_" prefix check and typedef-follow logic to a new
function "check_attach_btf_id()" which is called only once during
bpf_check().  btf_ctx_access() only operates on a BTF_KIND_FUNC_PROTO
type now. That should also be more efficient since it is done only
one instead of every-time check_ctx_access() is called.

"check_attach_btf_id()" needs to find the func_proto type from
the attach_btf_id.  It needs to store the result into the
newly added prog->aux->attach_func_proto.  func_proto
btf type has no name, so a proper name should be stored into
"attach_func_name" also.

v2:
- Move the "btf_trace_" check to an earlier verifier phase (Alexei)
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191025001811.1718491-1-kafai@fb.com

Madalin Bucur says:

====================
DPAA Ethernet changes

v3: add newline at the end of error messages
v2: resending with From: field matching signed-off-by

Here's a series of changes for the DPAA Ethernet, addressing minor
or unapparent issues in the codebase, adding probe ordering based on
a recently added DPAA QMan API, removing some redundant code.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Newline was missing at the end of the error message.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>