- 04 Jun, 2008 18 commits
-
-
Ben Dooks authored
The changelog on the driver is superflous given this is being kept under revision control. Remove the other cruft in the header and update the copyright and the supported device list. Signed-off-by:
Ben Dooks <ben-linux@fluff.org> Signed-off-by:
David Woodhouse <dwmw2@infradead.org>
-
Ben Dooks authored
Fix a minor problem with what should have been debug output by changing printk() to dev_dbg() inside s3c2410_nand_update_chip(). Thanks to David Woodhouse for pointing this out. Signed-off-by:
Ben Dooks <ben-linux@fluff.org> Signed-off-by:
David Woodhouse <dwmw2@infradead.org>
-
Mike Frysinger authored
Handle the case where flash memory and ethernet mac/phy are mapped onto the same async bank [try #4] - drop superfluous casts - drop SSYNC() when reading from the flash and rewrite bfin_copy_from() to be like bfin_copy_to() so that we dont have to handle all the aligned/unaligned cases [try #3] rename bf5xx-flash to bfin-async-flash - move all kconfig board settings into board resources - fixup casting style according to lkml feedback - rewrite driver so that it can handle arbitrary of instances according to the declared platform resources [try #2] Remove useless SSYNC() as Will said [try #1] The BF533-STAMP does this for example. All board-specific configuration goes in your board resources file. Signed-off-by:
Mike Frysinger <vapier.adi@gmail.com> Acked-By:
Jörn Engel <joern@logfs.org> Signed-off-by:
Bryan Wu <cooloney@kernel.org> Signed-off-by:
David Woodhouse <dwmw2@infradead.org>
-
Chris Malley authored
Janitorial work to remove temporary pointers and make some functions a bit more readable. Signed-off-by:
Chris Malley <mail@chrismalley.co.uk> Reviewed-By:
Jörn Engel <joern@logfs.org> Signed-off-by:
David Woodhouse <dwmw2@infradead.org>
-
Adrian Bunk authored
Once upon a time, the MTD repository was using CVS. This patch therefore removes all usages of the no longer updated CVS keywords from the MTD code. This also includes code that printed them to the user. Signed-off-by:
Adrian Bunk <bunk@kernel.org> Signed-off-by:
David Woodhouse <dwmw2@infradead.org>
-
Adrian Hunter authored
Amend nandsim so that it does not assume 32-bit flash size. Signed-off-by:
Adrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by:
David Woodhouse <dwmw2@infradead.org>
-
Adrian Hunter authored
Signed-off-by:
Adrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by:
David Woodhouse <dwmw2@infradead.org>
-
Adrian Hunter authored
Signed-off-by:
Adrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by:
David Woodhouse <dwmw2@infradead.org>
-
Kyungmin Park authored
To get the correct information in case of power off recovery, it should read ECC status first Also remove previous workaround method. Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
David Woodhouse <dwmw2@infradead.org>
-
David Woodhouse authored
Signed-off-by:
David Woodhouse <dwmw2@infradead.org>
-
Michael Hennerich authored
- Add support for binary page size DataFlashes. - The driver now prints out pagesize and erasesize. Printout valuable information for creating flash filesystems. Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
Bryan Wu <cooloney@kernel.org> Signed-off-by:
David Woodhouse <dwmw2@infradead.org>
-
matthias@kaehlcke.net authored
Signed-off-by:
Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by:
David Woodhouse <dwmw2@infradead.org>
-
matthias@kaehlcke.net authored
Signed-off-by:
Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by:
David Woodhouse <dwmw2@infradead.org>
-
Robert P. J. Day authored
Signed-off-by:
Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by:
David Woodhouse <dwmw2@infradead.org>
-
Toralf Förster authored
Signed-off-by:
Toralf Förster <toralf.foerster@gmx.de> Signed-off-by:
David Woodhouse <dwmw2@infradead.org>
-
Mike Rapoport authored
This patch add support for non-CFI Eon EN29SL800B[BT] NOR flash chips. The Eon chips have manufacturer ID in the first bank, therefore this patch depends on support for flash chips with ID in bank other than 0. Signed-off-by:
Mike Rapoport <mike@compulab.co.il> Signed-off-by:
David Woodhouse <dwmw2@infradead.org>
-
Mike Rapoport authored
According to JEDEC "Standard Manufacturer's Identification Code" (http://www.jedec.org/download/search/jep106W.pdf) several first banks of NOR flash can contain 0x7f instead of actual ID. This patch adds support for reading manufacturer ID from banks other than 0. Signed-off-by:
Mike Rapoport <mike@compulab.co.il> Signed-off-by:
David Woodhouse <dwmw2@infradead.org>
-
Mike Rapoport authored
Signed-off-by:
Mike Rapoport <mike@compulab.co.il> Signed-off-by:
David Woodhouse <dwmw2@infradead.org>
-
- 14 May, 2008 1 commit
-
-
Nate Case authored
Add support for M50FLW080A and M50FLW080B revisions of LPC flash devices. Signed-off-by:
Aaron Lindner <alindner@xes-inc.com> Signed-off-by:
Nate Case <ncase@xes-inc.com> Signed-off-by:
David Woodhouse <dwmw2@infradead.org>
-
- 06 May, 2008 1 commit
-
-
Alexander Belyakov authored
Fix typo in erase suspend while write fixup code leading to compile time error if CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE was defined. drivers/mtd/chips/cfi_cmdset_0001.c: In function 'fixup_intel_strataflash': drivers/mtd/chips/cfi_cmdset_0001.c:212: error: 'struct cfi_pri_amdstd' has no member named 'SuspendCmdSupport' Signed-off-by:
Alexander Belyakov <abelyako@googlemail.com> Signed-off-by:
David Woodhouse <dwmw2@infradead.org>
-
- 01 May, 2008 20 commits
-
-
git://git.infradead.org/mtd-2.6Linus Torvalds authored
* git://git.infradead.org/mtd-2.6: [MTD][NOR] Add physical address to point() method [JFFS2] Track parent inode for directories (for NFS export) [JFFS2] Invert last argument of jffs2_gc_fetch_inode(), make it boolean. [JFFS2] Quiet lockdep false positive. [JFFS2] Clean up jffs2_alloc_inode() and jffs2_i_init_once() [MTD] Delete long-unused jedec.h header file. [MTD] [NAND] at91_nand: use at91_nand_{en,dis}able consistently.
-
Jared Hulbert authored
Adding the ability to get a physical address from point() in addition to virtual address. This physical address is required for XIP of userspace code from flash. Signed-off-by:
Jared Hulbert <jaredeh@gmail.com> Reviewed-by:
Jörn Engel <joern@logfs.org> Acked-by:
Nicolas Pitre <nico@cam.org> Acked-by:
Greg Ungerer <gerg@uclinux.org> Signed-off-by:
David Woodhouse <dwmw2@infradead.org>
-
David Woodhouse authored
To support NFS export, we need to know the parent inode of directories. Rather than growing the jffs2_inode_cache structure, share space with the nlink field -- which was always set to 1 for directories anyway. Signed-off-by:
David Woodhouse <dwmw2@infradead.org>
-
Christoph Hellwig authored
With s390 the last arch switched to the generic sys_ptrace yesterday so we can now kill the ifdef around it to enforce every new port it using it instead of introducing new weirdo versions. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Woodhouse authored
We don't actually care about nlink; we only care whether the inode in question is unlinked or not. Signed-off-by:
David Woodhouse <dwmw2@infradead.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide: fix early setup of hwif->host_flags
-
git://lm-sensors.org/kernel/mhoffman/hwmon-2.6Linus Torvalds authored
* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: hwmon: (adt7473) minor cleanup / refactoring hwmon: (asb100) Remove some dead code hwmon: (lm75) Fix an incorrect comment hwmon: (w83793) VID and VRM handling cleanups hwmon: (w83l785ts) Don't ask the user to report failures hwmon: (smsc47b397) add a new chip id (0x8c)
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: module: add MODULE_STATE_GOING notifier call module: Enhance verify_export_symbols module: set unused_gpl_crcs instead of overwriting unused_crcs module: neaten __find_symbol, rename to find_symbol module: reduce module image and resident size module: make module_sect_attrs private to kernel/module.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: [CRYPTO] cryptd: Correct kzalloc error test [CRYPTO] eseqiv: Fix off-by-one encryption [CRYPTO] api: Fix scatterwalk_sg_chain [CRYPTO] authenc: Fix async crypto crash in crypto_authenc_genicv()
-
Sebastian Siewior authored
It's easy: grab locks before talking to hardware and realease them afterwards. The one big lock has been splitted into a hw_lock and mii_lock. Signed-off-by:
Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by:
Greg Ungerer <gerg@uclinux.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Sebastian Siewior authored
linux-2.6-mk68/drivers/net/fec.c: In function 'fec_enet_module_init': linux-2.6-mk68/drivers/net/fec.c:2627: warning: unused variable 'j' linux-2.6-mk68/drivers/net/fec.c: At top level: linux-2.6-mk68/drivers/net/fec.c:2136: warning: 'mii_link_interrupt' defined but not used Signed-off-by:
Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by:
Greg Ungerer <gerg@uclinux.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Ungerer authored
Remove the acquisition of unused interrupt types. We don't need to register all the TX and RX varients used on some ColdFire FEC hardware. Signed-off-by:
Greg Ungerer <gerg@uclinux.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Ungerer authored
Renamed the 5272 hash_table registers to match the "grp" hash_table registers of the other ColdFire parts. They are actually a group hash. The makes for consistent setup across all ColdFire parts. Signed-off-by:
Greg Ungerer <gerg@uclinux.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Sebastian Siewior authored
The interrupts must be disabled before considering the need resched bit of the task struct and they have to be disabled before calling schedule() Signed-off-by:
Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by:
Greg Ungerer <gerg@uclinux.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Ungerer authored
Rework the HZ definition to be more consistent with other architectures. Non-kernel includers will see a constant HZ setting of 100. Signed-off-by:
Greg Ungerer <gerg@uclinux.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Sebastian Siewior authored
include/asm-m68knommu/mcfdma.h defines base0-3 for M523x, M527x and M528x so it looks this has been forgotten. Signed-off-by:
Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by:
Greg Ungerer <gerg@uclinux.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Ungerer authored
Remove unused CONFIG_DISKtel support. Missing config definition pointed out by Robert P. J. Day <rpjday@mindspring.com> Signed-off-by:
Greg Ungerer <gerg@uclinux.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Steve Bennett authored
This patch adds linux-2.6.x kernel support for the Intec Automation ColdFire 5282-based boards, the WildFire and WildFireMod Signed-Off-By:
Steve Bennett <steveb@workware.net.au> Signed-off-by:
Greg Ungerer <gerg@uclinux.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Ungerer authored
Remove unused board type CONFIG_MTD_KeyTechnology. Pointed out by Robert P. J. Day <rpjday@mindspring.com> Signed-off-by:
Greg Ungerer <gerg@uclinux.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Ungerer authored
Fix ColdFire 5206e platform UART init function naming. Signed-off-by:
Greg Ungerer <gerg@uclinux.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-