- 28 Oct, 2016 19 commits
-
-
Chris Wilson authored
In forthcoming patches, we want to be able to dynamically allocate the wait_queue_t used whilst awaiting. This is more convenient if we extend the i915_sw_fence_await_sw_fence() to perform the allocation for us if we pass in a gfp mask as an alternative than a preallocated struct. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-2-chris@chris-wilson.co.uk
-
Chris Wilson authored
We will need to wait on DMA completion (as signaled via struct fence) before executing our i915_gem_request. Therefore we want to expose a method for adding the await on the fence itself to the request. v2: Add a comment detailing a failure to handle a signal-on-any fence-array. v3: Pretend that magic numbers don't exist. Signed-off-by:
-
Chris Wilson authored
We are not allowed to touch the GTT entries underneath an atomic section, as they take a rpm wakelock (which is illegal from atomic context) and in the near future acquiring the DMA address for a page within an object may sleep for an allocation. This makes the current shortcircuit in relocation_iomap() for performing a second relocation on an adjacent page illegal, and we need to release the atomic iomapping, lookup the DMA, insert it into the GTT before reentering the atomic iomap section. As it happens, this is precisely what we do on if we are using an iomapping over the full object and not just a single page and by removing the shortcut, we do the right thing. Fixes: 9c870d03 ("drm/i915: Use RPM as the barrier for controlling...") Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com>
-
Matt Roper authored
This was the only use of (misleadingly-named) intel_num_planes() function, so we can remove it as well. Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1477522291-10874-3-git-send-email-matthew.d.roper@intel.comReviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com>
-
Matt Roper authored
This macro's name is a bit misleading; it doesn't actually iterate over all planes since it omits the cursor plane. Its only uses are in gen9 code which is using it to iterate over the universal planes (which we treat as primary+sprites); in these cases the legacy cursor registers are programmed independently if necessary. The macro's iterator value (0 for primary plane, spritenum+1 for each secondary plane) also isn't meaningful outside the gen9 context where the hardware considers them to all be "universal" planes that follow this numbering. This is just a renaming/clarification patch with no functional change. However it will make the subsequent patches more clear. Signed-off-by:
-
Navare, Manasi D authored
These static helper functions are required to be used during fallback link rate implemnetation so they need to be placed at the top of the file. v3: * Add cleanup to other patch (Mika Kahola) v2: * Dont move around functions declared in intel_drv.h (Rodrigo Vivi) Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
Mika Kahola <mika.kahola@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1477524358-16563-4-git-send-email-manasi.d.navare@intel.com
-
Ander Conselvan de Oliveira authored
The port registers related to the phys in broxton map to different channels and specific phys. Make that mapping explicit. v2: Pass enum dpio_phy to macros instead of mmio base. (Imre) v3: Fix typo in macros. (Imre) v4: Also change variables from u32 to enum dpio_phy. (Imre) Remove leftovers from previous version. (Imre) v5: Actually git add the changes. Signed-off-by:Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by:
Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1476863940-6019-1-git-send-email-ander.conselvan.de.oliveira@intel.com
-
Ander Conselvan de Oliveira authored
Use struct bxt_ddi_phy_info to hold information of where the Rcomp resistor is located, instead of hard coding it in the init sequence. Note that this moves the enabling of the phy with the Rcomp resistor out of the power well enable code. That should be safe since bxt_ddi_phy_init() is called while the power domains lock is held, and that is the only way that function gets called, so there is no possibility of a concurrent phy enable caused by a power domain get call. v2: Replace comment about lock with lockdep_assert_held() (Imre) Signed-off-by:
-
Ander Conselvan de Oliveira authored
Information about which phy is dual channel is hardcoded in the phy init sequence. Split that to a separate struct so the init sequence is more generic. v2: Restore mangled part that ended up in following patch. (Imre) Signed-off-by:
-
Ander Conselvan de Oliveira authored
The vswing sequence is related to the DPIO phy, so move it closer to the rest of DPIO phy related code. Signed-off-by:
-
Ander Conselvan de Oliveira authored
Move the DPIO phy documentation section to intel_dpio_phy.c, since that is a more suitable place now that there is a source file dedicated for those phys. Signed-off-by:
-
Ander Conselvan de Oliveira authored
The phy in broxton is also a dpio phy, similar to cherryview but with programming through MMIO. So move the code together with the other similar phys. Signed-off-by:
-
Ander Conselvan de Oliveira authored
Pass lane count to bxt_ddi_phy_calc_lane_optmin_mask() instead of having it extract that number from a pipe_config to decouple the phy code from intel_crtc_state. Signed-off-by:
-
Ander Conselvan de Oliveira authored
The mapping from the BXT_DPIO_CMN_* power wells to their respective phys required a detour implemented in the bxt_power_well_to_phy() function. Instead, embed that information directly into the power_well struct, by resurrecting the data field. Signed-off-by:
-
Ander Conselvan de Oliveira authored
Calling it data seems to imply arbitrary data can be associated with the power well. However, that field is used for look ups and expected to be unique, so rename it. Signed-off-by:
-
Daniel Vetter authored
Backmerge latest drm-next to pull in the s/fence/dma_fence/ rework, needed before we merge more i915 fencing patches. Signed-off-by:Daniel Vetter <daniel.vetter@intel.com>
-
git://github.com/skeggsb/linuxDave Airlie authored
Karol's work which greatly improves volt/clock changes on a heap of boards, nothing too exciting beyond a random collection of fixes. * 'linux-4.9' of git://github.com/skeggsb/linux: (33 commits) drm/nouveau/fb/nv50: defer DMA mapping of scratch page to oneinit() hook drm/nouveau/fb/gf100: defer DMA mapping of scratch page to oneinit() hook drm/nouveau/pci: set streaming DMA mask early drm/nouveau/kms: add Maxwell to backlight initialization drm/nouveau/bar/nv50: fix bar2 vm size drm/nouveau/disp: remove unused function in sorg94.c drm/nouveau/volt: use kernel's 64-bit signed division function drm/nouveau/core: add missing header dependencies drm/nouveau/gr/nv3x: add 0x0597 kelvin 3d class support drm/nouveau/drm/nouveau: add a LED driver for the NVIDIA logo drm/nouveau/fb/ram: Use Kepler implementation on Maxwell drm/nouveau/volt: Make use of cvb coefficients drm/nouveau/volt/gf100-: Add speedo drm/nouveau/volt: Add implementation for gf100 drm/nouveau/bios/vmap: unk0 field is the mode drm/nouveau/volt: Don't require perfect fit drm/nouveau/clk: Allow boosting only when NvBoost is set drm/nouveau/bios: Add parsing of VPSTATE table drm/nouveau/clk: Respect voltage limits in nvkm_cstate_prog drm/nouveau/clk: Fixup cstate selection ...
-
git://anongit.freedesktop.org/git/drm-intelDave Airlie authored
Pull request already again to get the s/fence/dma_fence/ stuff in and allow everyone to resync. Otherwise really just misc stuff all over, and a new bridge driver. * tag 'topic/drm-misc-2016-10-27' of git://anongit.freedesktop.org/git/drm-intel: drm/bridge: fix platform_no_drv_owner.cocci warnings drm/bridge: fix semicolon.cocci warnings drm: Print some debug/error info during DP dual mode detect drm: mark drm_of_component_match_add dummy inline drm/bridge: add Silicon Image SiI8620 driver dt-bindings: add Silicon Image SiI8620 bridge bindings video: add header file for Mobile High-Definition Link (MHL) interface drm: convert DT component matching to component_match_add_release() dma-buf: Rename struct fence to dma_fence dma-buf/fence: add an lockdep_assert_held() drm/dp: Factor out helper to distinguish between branch and sink devices drm/edid: Only print the bad edid when aborting drm/msm: add missing header dependencies drm/msm/adreno: move function declarations to header file drm/i2c/tda998x: mark symbol static where possible doc: add missing docbook parameter for fence-array drm: RIP mode_config->rotation_property drm/msm/mdp5: Advertize 180 degree rotation drm/msm/mdp5: Use per-plane rotation property
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
First new feature pull for 4.10. Highlights: - Support for multple virtual displays in the virtual dce component - New VM mgr to support non-contiguous vram buffers - Support for UVD powergating on additional asics - Power management improvements - lots of code cleanup and bug fixes * 'drm-next-4.10' of git://people.freedesktop.org/~agd5f/linux: (107 commits) drm/amdgpu: turn on/off uvd clock when dpm enable/disable on CI drm/amdgpu: disable dpm before turn off clock when vce idle. drm/amdgpu: enable uvd bypass mode for CI/VI. drm/amdgpu: just not load smc firmware if smu is already running drm/amdgpu: when suspend, set boot state instand of disable dpm. drm/amdgpu: use failed label to handle context init failure drm/amdgpu: add amdgpu_ttm_bo_eviction_valuable callback drm/ttm: make eviction decision a driver callback v2 drm/ttm: fix coding style in ttm_bo_driver.h drm/radeon/pm: autoswitch power state when in balanced mode drm/amd/powerplay: fix spelling mistake and add KERN_WARNING to printks drm/amdgpu:new ids flag for preempt drm/amdgpu: mark symbols static where possible drm/amdgpu: change function declarations and add missing header dependencies drm/amdgpu: s/amdgpuCrtc/amdgpu_crtc/ in pageflip code drm/amdgpu/atom: remove a bunch of unused functions drm/amdgpu: consolidate atom scratch reg handling for hangs drm/amdgpu: use amdgpu_bo_[create|free]_kernel for wb drm/amdgpu: add VCE VM session tracking drm/amdgpu: improve parse_cs handling a bit ...
-
- 27 Oct, 2016 13 commits
-
-
Rex Zhu authored
Signed-off-by:
Rex Zhu <Rex.Zhu@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Rex Zhu authored
v2: move return value check as well Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
-
Rex Zhu authored
Signed-off-by:
-
Rex Zhu authored
Signed-off-by:
-
Rex Zhu authored
fix pm-hibernate bug, when suspend/resume, dpm start failed. Signed-off-by:
-
Huang Rui authored
Signed-off-by:
Huang Rui <ray.huang@amd.com> Reviewed-by:
-
Tvrtko Ursulin authored
Newline somehow ended up in the middle of the line. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
https://github.com/01org/gvt-linuxDaniel Vetter authored
gvt-next-2016-10-27 - Resolve current left build issue with ACPI=n and 32bit kernel - TLB workaround from Arkadiusz - vGPU reset fix from Ping - workload scheduler nesting sleep fix from Changbin - more misc fixes for sparse warnings and cleanups Signed-off-by: -
kbuild test robot authored
drivers/gpu/drm/bridge/sil-sii8620.c:1556:3-8: No need to set .owner here. The core will do it. Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci CC: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20161026165836.GA98766@lkp-sb04.lkp.intel.com
-
kbuild test robot authored
drivers/gpu/drm/bridge/sil-sii8620.c:988:2-3: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci CC: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Du, Changbin authored
We cannot use blocking method mutex_lock inside a wait loop. Here we invoke pick_next_workload() which needs acquire a mutex in our "condition" experssion. Then we go into a another of the going-to-sleep sequence and changing the task state. This is a dangerous. Let's rewrite the wait sequence to avoid nested sleeping. v2: fix do...while loop exit condition (zhenyu) v3: rebase to gvt-staging branch Signed-off-by:
Du, Changbin <changbin.du@intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com>
-
Bing Niu authored
throw error message in elsp emulation handler basing on execlist submit result. guest will trigger tdr process for recovering, gvt just follow guest's desire. v2: populate error to top of mmio emulation logic, comments from zhenyu Signed-off-by:
Bing Niu <bing.niu@intel.com> Signed-off-by:
-
Ping Gao authored
Full vGPU reset need to release all the shadow PPGGT pages to avoid unnecessary write-protect and also should re-initialize pvinfo after resetting vregs to keep pvinfo correct. Signed-off-by:
Ping Gao <ping.a.gao@intel.com> Signed-off-by:
-
- 26 Oct, 2016 8 commits
-
-
Anusha Srivatsa authored
Currently, for display there is only one DMC image for KBL. Remove the stepping_info table for KBL and use the no_stepping_info array for loading the firmware. v2: Removed the block of code as pointed out by Rodrigo to make the loads as generic as possible. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by:
-
Imre Deak authored
There's at least one LSPCON device that occasionally returns an unexpected adaptor ID which leads to a failed detect. Print some debug info to help debugging this and future cases. Also print an error for an unexpected adaptor ID, so users can report it. v2: - s/adapter/adaptor/ and add code comment about incorrect type 1 adaptor IDs. (Ville) Cc: dri-devel@lists.freedesktop.org Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1477499359-12001-1-git-send-email-imre.deak@intel.com
-
Arnd Bergmann authored
The newly added drm_of_component_match_add helper is defined as 'static' in a header when CONFIG_OF is disabled, causing a warning each time the header is included: In file included from /git/arm-soc/drivers/gpu/drm/bridge/dw-hdmi.c:23:0: include/drm/drm_of.h:33:13: error: 'drm_of_component_match_add' defined but not used [-Werror=unused-function] This marks it 'inline' like the other such helpers in this file. Fixes: 97ac0e47 ("drm: convert DT component matching to component_match_add_release()") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Ville Syrjälä authored
Pass the framebuffer size in .16 fixed point coordinates to drm_rect_rotate() since that's what the source coordinates are as well at this stage. We used to do this part of the computation in integer coordinates, but that got changed when moving the computation to happen in the check phase of the operation. Unfortunately I forgot to shift up the fb width and height appropriately. With the bogus size we ended up with some negative fb offset, which when added to the vma offset caused out scanout to start at an offset earlier than we inteded. Eg. when testing on my SKL I saw a row of incorrect tiles at the top of my screen. Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Cc: drm-intel-fixes@lists.freedesktop.org Fixes: b63a16f6 ("drm/i915: Compute display surface offset in the plane check hook for SKL+") Signed-off-by:
-
Arkadiusz Hiler authored
Comment mentioned use of intel_uncore_forcewake_irq{unlock, lock} functions which are nonexistent (and never were). The description was also incomplete and could cause confusion. Updated comment is more elaborate on usage and caveats. v2: mention __locked variant of intel_uncore_forcewake_{get,put} instead of plain ones Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by:Arkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by:
Matthew Auld <matthew.auld@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilsono.c.uk> [Mika: removed two superfluous lines on comment noted by Chris] Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1477399682-3133-1-git-send-email-arkadiusz.hiler@intel.com
-
Imre Deak authored
On my APL the LSPCON firmware resumes in PCON mode as opposed to the expected LS mode. It also appears to be in a state where AUX DPCD reads will succeed but return garbage recovering only after a few hundreds of milliseconds. After the recovery time DPCD reads will result in the correct values and things will continue to work. If I2C over AUX is attempted during this recovery time (implying an AUX write transaction) the firmware won't recover and will stay in this broken state. As a workaround check if the firmware is in PCON state after resume and if so wait until the correct DPCD values are returned. For this we compare the branch descriptor with the one we cached during init time. If the firmware was in the LS state, we skip the w/a and continue as before. v2: - Use the DP descriptor value cached in intel_dp. (Jani) - Get to intel_dp using container_of(), instead of a cached ptr. (Shashank) - Use usleep_range() instead of msleep(). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98353 Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Imre Deak authored
We can use the container_of() magic to get to the DDC adapter, so no need for caching a pointer to it. We'll also need to get at the intel_dp ptr in the following patch, so add a helper that can be used for both purposes. Cc: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by:
-
Imre Deak authored
As for external DP sink and branch devices read and print the DP descriptor for eDP and LSPCON devices as well to aid debugging. v2: - Split out this change to a separate patch. (Jani) Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
