There is an issue in reserving and claiming space for localalloc, When
localalloc space is not enough, it would claim space from global_bitmap.
And if there is not enough free space in global_bitmap, the size of
claiming space would set to half of orignal size and retry.

The issue is as follows: osb->local_alloc_bits is set to half of orignal
size in ocfs2_recalc_la_window(), but ac->ac_bits_wanted is set to
osb->local_alloc_default_bits which is not changed.  localalloc always
reserves and claims local_alloc_default_bits space and returns ENOSPC.

So, ac->ac_bits_wanted should be osb->local_alloc_bits which would be
changed.
Signed-off-by: Younger Liu <younger.liu@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Jeff Liu <jeff.liu@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dlm_request_all_locks() should deal with the status sent from target node
if DLM_LOCK_REQUEST_MSG is sent successfully, or recovery master will fall
into endless loop, waiting for other nodes to send locks and
DLM_RECO_DATA_DONE_MSG to me.

        NodeA                                  NodeB
                                     selected as recovery master
                                     dlm_remaster_locks()
                                     ->dlm_request_all_locks()
                                     send DLM_LOCK_REQUEST_MSG to nodeA

It happened that NodeA cannot alloc memory when it processes this
message.  dlm_request_all_locks_handler() do not queue
dlm_request_all_locks_worker and returns -ENOMEM.  It will never send
locks and DLM_RECO_DATA_DONE_MSG to NodeB.

                                    NodeB do not deal with the status
                                    sent from nodeA, and will fall in
                                    endless loop waiting for the
                                    recovery state of NodeA to be
                                    changed.
Signed-off-by: joyce <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Jeff Liu <jeff.liu@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Though ocfs2 uses inode->i_mutex to protect i_size, there are both
i_size_read/write() and direct accesses.  Clean up all direct access to
eliminate confusion.
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Jie Liu <jeff.liu@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The issue scenario is as following:

When fallocating a very large disk space for a small file,
__ocfs2_extend_allocation attempts to get a very large transaction.  For
some journal sizes, there may be not enough room for this transaction,
and the fallocate will fail.

The patch below extends & restarts the transaction as necessary while
allocating space, and should work with even the smallest journal.  This
patch refers ext4 resize.

Test:
# mkfs.ocfs2 -b 4K -C 32K -T datafiles /dev/sdc
...(jounral size is 32M)
# mount.ocfs2 /dev/sdc /mnt/ocfs2/
# touch /mnt/ocfs2/1.log
# fallocate -o 0 -l 400G /mnt/ocfs2/1.log
fallocate: /mnt/ocfs2/1.log: fallocate failed: Cannot allocate memory
# tail -f /var/log/messages
[ 7372.278591] JBD: fallocate wants too many credits (2051 > 2048)
[ 7372.278597] (fallocate,6438,0):__ocfs2_extend_allocation:709 ERROR: status = -12
[ 7372.278603] (fallocate,6438,0):ocfs2_allocate_unwritten_extents:1504 ERROR: status = -12
[ 7372.278607] (fallocate,6438,0):__ocfs2_change_file_space:1955 ERROR: status = -12
^C
With this patch, the test works well.
Signed-off-by: Younger Liu <younger.liu@huawei.com>
Cc: Jie Liu <jeff.liu@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The driver core clears the driver data to NULL after device_release or
on probe failure.  Thus, it is not needed to manually clear the device
driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: David Brown <davidb@codeaurora.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Suman Anna <s-anna@ti.com>
Acked-by: Libo Chen <libo.chen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

acornfb checks for HAS_VIDC while support for that macro was removed in
v2.6.23 (when the arm26 port was removed).  So we can remove a bit of
dead code.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

do_fork() denies CLONE_THREAD | CLONE_PARENT if NEWUSER | NEWPID.

Then later copy_process() denies CLONE_SIGHAND if the new process will
be in a different pid namespace (task_active_pid_ns() doesn't match
current->nsproxy->pid_ns).

This looks confusing and inconsistent.  CLONE_NEWPID is very similar to
the case when ->pid_ns was already unshared, we want the same
restrictions so copy_process() should also nack CLONE_PARENT.

And it would be better to deny CLONE_NEWUSER && CLONE_SIGHAND as well
just for consistency.

Kill the "CLONE_NEWUSER | CLONE_NEWPID" check in do_fork() and change
copy_process() to do the same check along with ->pid_ns check we already
have.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Colin Walters <walters@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 8382fcac ("pidns: Outlaw thread creation after
unshare(CLONE_NEWPID)") nacks CLONE_NEWPID if the forking process
unshared pid_ns.  This is correct but unnecessary, copy_pid_ns() does
the same check.

Remove the CLONE_NEWPID check to cleanup the code and prepare for the
next change.

Test-case:

	static int child(void *arg)
	{
		return 0;
	}

	static char stack[16 * 1024];

	int main(void)
	{
		pid_t pid;

		assert(unshare(CLONE_NEWUSER | CLONE_NEWPID) == 0);

		pid = clone(child, stack + sizeof(stack) / 2,
				CLONE_NEWPID | SIGCHLD, NULL);
		assert(pid < 0 && errno == EINVAL);

		return 0;
	}

clone(CLONE_NEWPID) correctly fails with or without this change.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Colin Walters <walters@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 8382fcac ("pidns: Outlaw thread creation after
unshare(CLONE_NEWPID)") nacks CLONE_VM if the forking process unshared
pid_ns, this obviously breaks vfork:

	int main(void)
	{
		assert(unshare(CLONE_NEWUSER | CLONE_NEWPID) == 0);
		assert(vfork() >= 0);
		_exit(0);
		return 0;
	}

fails without this patch.

Change this check to use CLONE_SIGHAND instead.  This also forbids
CLONE_THREAD automatically, and this is what the comment implies.

We could probably even drop CLONE_SIGHAND and use CLONE_THREAD, but it
would be safer to not do this.  The current check denies CLONE_SIGHAND
implicitely and there is no reason to change this.

Eric said "CLONE_SIGHAND is fine.  CLONE_THREAD would be even better.
Having shared signal handling between two different pid namespaces is
the case that we are fundamentally guarding against."
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Colin Walters <walters@redhat.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Revert commit c846ef7d ("include/linux/smp.h:on_each_cpu(): switch
back to a macro").  It turns out that the problematic linux/irqflags.h
include was fixed within ia64 and mn10300.

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: David Daney <david.daney@cavium.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull more s390 updates from Heiko Carstens:
 "This includes one bpf/jit bug fix where the jit compiler could
  sometimes write generated code out of bounds of the allocated memory
  area.

  The rest of the patches are only cleanups and minor improvements"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/irq: reduce size of external interrupt handler hash array
  s390/compat,uid16: use current_cred()
  s390/ap_bus: use and-mask instead of a cast
  s390/ftrace: avoid pointer arithmetics with function pointers
  s390: make various functions static, add declarations to header files
  s390/compat signal: add couple of __force annotations
  s390/mm: add __releases()/__acquires() annotations to gmap_alloc_table()
  s390: keep Kconfig sorted
  s390/irq: rework irq subclass handling
  s390/irq: use hlists for external interrupt handler array
  s390/dumpstack: convert print_symbol to %pSR
  s390/perf: Remove print_hex_dump_bytes() debug output
  s390: update defconfig
  s390/bpf,jit: fix address randomization

Pull kconfig updates from Michal Marek:
 "This is the kconfig part of kbuild for v3.12-rc1:
   - post-3.11 search code fixes and micro-optimizations
   - CONFIG_MODULES is no longer a special case; this is needed to
     eventually fix the bug that using KCONFIG_ALLCONFIG breaks
     allmodconfig
   - long long is used to store hex and int values
   - make silentoldconfig no longer warns when a symbol changes from
     tristate to bool (it's a job for make oldconfig)
   - scripts/diffconfig updated to work with newer Pythons
   - scripts/config does not rely on GNU sed extensions"

* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kconfig: do not allow more than one symbol to have 'option modules'
  kconfig: regenerate bison parser
  kconfig: do not special-case 'MODULES' symbol
  diffconfig: Update script to support python versions 2.5 through 3.3
  diffconfig: Gracefully exit if the default config files are not present
  modules: do not depend on kconfig to set 'modules' option to symbol MODULES
  kconfig: silence warning when parsing auto.conf when a symbol has changed type
  scripts/config: use sed's POSIX interface
  kconfig: switch to "long long" for sanity
  kconfig: simplify symbol-search code
  kconfig: don't allocate n+1 elements in temporary array
  kconfig: minor style fixes in symbol-search code
  kconfig/[mn]conf: shorten title in search-box
  kconfig: avoid multiple calls to strlen
  Documentation/kconfig: more concise and straightforward search explanation

Pull battery/power supply driver updates from Anton Vorontsov:
 "New drivers:

   - APM X-Gene system reboot driver by Feng Kan and Loc Ho (APM).

   - Qualcomm MSM reboot/poweroff driver by Abhimanyu Kapur (Codeaurora).

   - Texas Instruments BQ24190 charger driver by Mark A.  Greer (Animal
     Creek Technologies).

   - Texas Instruments TWL4030 MADC battery driver by Lukas Märdian and
     Marek Belisko (Golden Delicious Computers).  The driver is used on
     Freerunner GTA04 phones.

  Highlighted fixes and improvements:

   - Suspend/wakeup logic improvements: power supply objects will block
     system suspend until all power supply events are processed.  Thanks
     to Zoran Markovic (Linaro), Arve Hjonnevag and Todd Poynor (Google)"

* tag 'for-v3.12' of git://git.infradead.org/battery-2.6:
  rx51_battery: Fix channel number when reading adc value
  power: Add twl4030_madc battery driver.
  bq24190_charger: Workaround SS definition problem on i386 builds
  power_supply: Prevent suspend until power supply events are processed
  vexpress-poweroff: Should depend on the required infrastructure
  twl4030-charger: Fix compiler warning with regulator_enable()
  rx51_battery: Replace hardcoded channels values.
  bq24190_charger: Add support for TI BQ24190 Battery Charger
  ab8500-charger: We print an unintended error message
  max8925_power: Fix missing of_node_put
  power_supply: Replace strict_strtol() with kstrtol()
  power: Add APM X-Gene system reboot driver
  power_supply: tosa_battery: Get rid of irq_to_gpio usage
  power supply: collie_battery: Convert to use dev_pm_ops
  power_supply: Make goldfish_battery depend on GOLDFISH || COMPILE_TEST
  power: reset: Add msm restart support
  MAINTAINERS: drivers/power: add entry for SmartReflex AVS drivers

Pull powerpc fixes from Ben Herrenschmidt:
 "Here are a handful of small powerpc fixes.

  A couple of section mismatches (always worth fixing), a missing export
  of a new symbol causing build failures of modules, a page fault
  deadlock fix (interestingly that bug has been around for a LONG time,
  though it seems to be more easily triggered by KVM) and fixing pseries
  default idle loop in the absence of the cpuidle drivers (such as
  during boot)"

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Default arch idle could cede processor on pseries
  fbdev/ps3fb: Fix section mismatch warning for ps3fb_probe
  powerpc: Fix section mismatch warning for prom_rtas_call
  powerpc: Fix possible deadlock on page fault
  powerpc: Export cpu_to_chip_id() to fix build error

Merge tag 'stable/for-linus-3.12-rc0-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull Xen bug-fixes from Konrad Rzeszutek Wilk:
 "This pull I usually do after rc1 is out but because we have a nice
  amount of fixes, some bootup related fixes for ARM, and it is early in
  the cycle we figured to do it now to help with tracking of potential
  regressions.

  The simple ones are the ARM ones - one of the patches fell through the
  cracks, other fixes a bootup issue (unconditionally using Xen
  functions).  Then a fix for a regression causing preempt count being
  off (patch causing this went in v3.12).

  Lastly are the fixes to make Xen PVHVM guests use PV ticketlocks (Xen
  PV already does).

  The enablement of that was supposed to be part of the x86 spinlock
  merge in commit 816434ec ("The biggest change here are
  paravirtualized ticket spinlocks (PV spinlocks), which bring a nice
  speedup on various benchmarks...") but unfortunatly it would cause
  hang when booting Xen PVHVM guests.  Yours truly got all of the bugs
  fixed last week and they (six of them) are included in this pull.

  Bug-fixes:
   - Boot on ARM without using Xen unconditionally
   - On Xen ARM don't run cpuidle/cpufreq
   - Fix regression in balloon driver, preempt count warnings
   - Fixes to make PVHVM able to use pv ticketlock.
   - Revert Xen PVHVM disabling pv ticketlock (aka, re-enable pv ticketlocks)"

* tag 'stable/for-linus-3.12-rc0-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/spinlock: Don't use __initdate for xen_pv_spin
  Revert "xen/spinlock: Disable IRQ spinlock (PV) allocation on PVHVM"
  xen/spinlock: Don't setup xen spinlock IPI kicker if disabled.
  xen/smp: Update pv_lock_ops functions before alternative code starts under PVHVM
  xen/spinlock: We don't need the old structure anymore
  xen/spinlock: Fix locking path engaging too soon under PVHVM.
  xen/arm: disable cpuidle and cpufreq when linux is running as dom0
  xen/p2m: Don't call get_balloon_scratch_page() twice, keep interrupts disabled for multicalls
  ARM: xen: only set pm function ptrs for Xen guests

Pull drm fixes from Dave Airlie:
 "Daniel had some fixes queued up, that were delayed, the stolen memory
  ones and vga arbiter ones are quite useful, along with his usual bunch
  of stuff, nothing for HSW outputs yet.

  The one nouveau fix is for a regression I caused with the poweroff stuff"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (30 commits)
  drm/nouveau: fix oops on runtime suspend/resume
  drm/i915: Delay disabling of VGA memory until vgacon->fbcon handoff is done
  drm/i915: try not to lose backlight CBLV precision
  drm/i915: Confine page flips to BCS on Valleyview
  drm/i915: Skip stolen region initialisation if none is reserved
  drm/i915: fix gpu hang vs. flip stall deadlocks
  drm/i915: Hold an object reference whilst we shrink it
  drm/i915: fix i9xx_crtc_clock_get for multiplied pixels
  drm/i915: handle sdvo input pixel multiplier correctly again
  drm/i915: fix hpd work vs. flush_work in the pageflip code deadlock
  drm/i915: fix up the relocate_entry refactoring
  drm/i915: Fix pipe config warnings when dealing with LVDS fixed mode
  drm/i915: Don't call sg_free_table() if sg_alloc_table() fails
  i915: Update VGA arbiter support for newer devices
  vgaarb: Fix VGA decodes changes
  vgaarb: Don't disable resources that are not owned
  drm/i915: Pin pages whilst mapping the dma-buf
  drm/i915: enable trickle feed on Haswell
  x86: add early quirk for reserving Intel graphics stolen memory v5
  drm/i915: split PCI IDs out into i915_drm.h v4
  ...

Pull nfsd updates from Bruce Fields:
 "This was a very quiet cycle! Just a few bugfixes and some cleanup"

* 'nfsd-next' of git://linux-nfs.org/~bfields/linux:
  rpc: let xdr layer allocate gssproxy receieve pages
  rpc: fix huge kmalloc's in gss-proxy
  rpc: comment on linux_cred encoding, treat all as unsigned
  rpc: clean up decoding of gssproxy linux creds
  svcrpc: remove unused rq_resused
  nfsd4: nfsd4_create_clid_dir prints uninitialized data
  nfsd4: fix leak of inode reference on delegation failure
  Revert "nfsd: nfs4_file_get_access: need to be more careful with O_RDWR"
  sunrpc: prepare NFS for 2038
  nfsd4: fix setlease error return
  nfsd: nfs4_file_get_access: need to be more careful with O_RDWR

Pull hwmon cleanups from Guenter Roeck:
 "Minor cleanup in ina2xx and hwmon-vid drivers; no functional changes"

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (ina2xx) Remove casting the return value which is a void pointer
  hwmon: (hwmon-vid) Add __maybe_unused attribute to dummy variable

Pull x86 jumplabel changes from Peter Anvin:
 "One more x86 tree for this merge window.  This tree improves the
  handling of jump labels, so that most of the time we don't have to do
  a massive initial patching run.

  Furthermore, we will error out of the jump label is not what is
  expected, eg if it has been corrupted or tampered with"

* 'x86/jumplabel' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/jump-label: Show where and what was wrong on errors
  x86/jump-label: Add safety checks to jump label conversions
  x86/jump-label: Do not bother updating nops if they are correct
  x86/jump-label: Use best default nops for inital jump label calls

When adding cpuidle support to pSeries, we introduced two
regressions:

  - The new cpuidle backend driver only works under hypervisors
    supporting the "SLPLAR" option, which isn't the case of the
    old POWER4 hypervisor and the HV "light" used on js2x blades

  - The cpuidle driver registers fairly late, meaning that for
    a significant portion of the boot process, we end up having
    all threads spinning. This slows down the boot process and
    increases the overall resource usage if the hypervisor has
    shared processors.

This fixes both by implementing a "default" idle that will cede
to the hypervisor when possible, in a very simple way without
all the bells and whisles of cpuidle.
Reported-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Acked-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org>

While cross-building for PPC64 I've got

WARNING: drivers/video/built-in.o(.text+0x9f9ca): Section mismatch in
reference from the function .ps3fb_probe() to th e variable
.init.data:ps3fb_fix The function .ps3fb_probe() references the
variable __initdata ps3fb_fix.  This is often because .ps3fb_probe
lacks a __initdata annotation or the annotation of ps3fb_fix is wrong.

WARNING: drivers/video/built-in.o(.text+0x9f9d2): Section mismatch in
reference from the function .ps3fb_probe() to the variable
.init.data:ps3fb_fix The function .ps3fb_probe() references the
variable __initdata ps3fb_fix.  This is often because .ps3fb_probe
lacks a __initdata annotation or the annotation of ps3fb_fix is wrong.

WARNING: drivers/built-in.o(.text+0xe222a): Section mismatch in
reference from the function .ps3fb_probe() to the variable
.init.data:ps3fb_fix The function .ps3fb_probe() references the
variable __initdata ps3fb_fix.  This is often because .ps3fb_probe
lacks a __initdata annotation or the annotation of ps3fb_fix is wrong.

WARNING: drivers/built-in.o(.text+0xe2232): Section mismatch in
reference from the function .ps3fb_probe() to the variable
.init.data:ps3fb_fix The function .ps3fb_probe() references the
variable __initdata ps3fb_fix.  This is often because .ps3fb_probe
lacks a __initdata annotation or the annotation of ps3fb_fix is wrong.

WARNING: vmlinux.o(.text+0x561d4a): Section mismatch in reference from
the function .ps3fb_probe() to the variable .init.data:ps3fb_fix The
function .ps3fb_probe() references the variable __initdata ps3fb_fix.
This is often because .ps3fb_probe lacks a __initdata annotation or
the annotation of ps3fb_fix is wrong.

Mismatch was introduced with 48c68c4f "Drivers: video: remove __dev*
attributes."

Remove __init data annotation from ps3fb_fix.
Signed-off-by: Vladimir Murzin <murzin.v@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

While cross-building for PPC64 I've got

WARNING: vmlinux.o(.text.unlikely+0x1ba): Section mismatch in
reference from the function .prom_rtas_call() to the variable
.init.data:dt_string_start The function .prom_rtas_call() references
the variable __initdata dt_string_start.  This is often because
.prom_rtas_call lacks a __initdata annotation or the annotation of
dt_string_start is wrong.

WARNING: vmlinux.o(.meminit.text+0xeb0): Section mismatch in reference
from the function .free_area_init_core.isra.47() to the function
.init.text:.set_pageblock_order() The function __meminit
.free_area_init_core.isra.47() references a function __init
.set_pageblock_order().  If .set_pageblock_order is only used by
.free_area_init_core.isra.47 then annotate .set_pageblock_order with a
matching annotation.

Fix it by proper annotation of prom_rtas_call.
Signed-off-by: Vladimir Murzin <murzin.v@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

 stack_grow_into/14082 is trying to acquire lock:
  (&mm->mmap_sem){++++++}, at: [<c000000000206d28>] .might_fault+0x78/0xe0

 but task is already holding lock:
  (&mm->mmap_sem){++++++}, at: [<c0000000007ffd8c>] .do_page_fault+0x24c/0x910

 other info that might help us debug this:
  Possible unsafe locking scenario:

        CPU0
        ----
   lock(&mm->mmap_sem);
   lock(&mm->mmap_sem);

  *** DEADLOCK ***

  May be due to missing lock nesting notation

 1 lock held by stack_grow_into/14082:
  #0:  (&mm->mmap_sem){++++++}, at: [<c0000000007ffd8c>] .do_page_fault+0x24c/0x910

 stack backtrace:
 CPU: 21 PID: 14082 Comm: stack_grow_into Not tainted 3.10.0-10.el7.ppc64.debug #1
 Call Trace:
 [c0000003d396b850] [c000000000016e7c] .show_stack+0x7c/0x1f0 (unreliable)
 [c0000003d396b920] [c000000000813fc8] .dump_stack+0x28/0x3c
 [c0000003d396b990] [c000000000124b90] .__lock_acquire+0x1640/0x1800
 [c0000003d396bab0] [c00000000012570c] .lock_acquire+0xac/0x250
 [c0000003d396bb80] [c000000000206d54] .might_fault+0xa4/0xe0
 [c0000003d396bbf0] [c0000000007ffe2c] .do_page_fault+0x2ec/0x910
 [c0000003d396be30] [c0000000000092e8] handle_page_fault+0x10/0x30
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc allmodconfig build fails with:

ERROR: ".cpu_to_chip_id" [drivers/block/mtip32xx/mtip32xx.ko] undefined!

The problem was introduced with commit 15863ff3 (powerpc: Make chip-id
information available to userspace).

Export the missing symbol.

Cc: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Cc: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Pull CRIS updates from Jesper Nilsson:
 "Mostly cleanup and removal of unused configs"

* tag 'cris-for-3.12' of git://jni.nu/cris:
  CRIS: drop unused Kconfig symbols
  CRIS: Add kvm_para.h which includes generic file
  CRIS: remove unused current_regs
  CRIS: Remove last traces of legacy RTC drivers
  CRIS: remove "config OOM_REBOOT"

The mn10300 kernel crashes just after starting userspace programs, if
CONFIG_PREEMPT is disabled:

  Freeing unused kernel memory: 96K (90286000 - 9029e000)
  MISALIGN: 97c33ff9: unsupported instruction f
  MISALIGN: 97c33ff9: unsupported instruction f
  MISALIGN: 97c33ff9: unsupported instruction f
  :

This fixes the problem that was introduced by commit d17fc238
("MN10300: Enable IRQs more in system call exit work path").
Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Kiyoshi Owada <owada.kiyoshi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull device tree core updates from Grant Likely:
 "Generally minor changes.  A bunch of bug fixes, particularly for
  initialization and some refactoring.  Most notable change if feeding
  the entire flattened tree into the random pool at boot.  May not be
  significant, but shouldn't hurt either"

Tim Bird questions whether the boot time cost of the random feeding may
be noticeable.  And "add_device_randomness()" is definitely not some
speed deamon of a function.

* tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux:
  of/platform: add error reporting to of_amba_device_create()
  irq/of: Fix comment typo for irq_of_parse_and_map
  of: Feed entire flattened device tree into the random pool
  of/fdt: Clean up casting in unflattening path
  of/fdt: Remove duplicate memory clearing on FDT unflattening
  gpio: implement gpio-ranges binding document fix
  of: call __of_parse_phandle_with_args from of_parse_phandle
  of: introduce of_parse_phandle_with_fixed_args
  of: move of_parse_phandle()
  of: move documentation of of_parse_phandle_with_args
  of: Fix missing memory initialization on FDT unflattening
  of: consolidate definition of early_init_dt_alloc_memory_arch()
  of: Make of_get_phy_mode() return int i.s.o. const int
  include: dt-binding: input: create a DT header defining key codes.
  of/platform: Staticize of_platform_device_create_pdata()
  of: Specify initrd location using 64-bit
  dt: Typo fix
  OF: make of_property_for_each_{u32|string}() use parameters if OF is not enabled

Pull slave-dmaengine updates from Vinod Koul:
 "This pull brings:
   - Andy's DW driver updates
   - Guennadi's sh driver updates
   - Pl08x driver fixes from Tomasz & Alban
   - Improvements to mmp_pdma by Daniel
   - TI EDMA fixes by Joel
   - New drivers:
     - Hisilicon k3dma driver
     - Renesas rcar dma driver
  - New API for publishing slave driver capablities
  - Various fixes across the subsystem by Andy, Jingoo, Sachin etc..."

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (94 commits)
  dma: edma: Remove limits on number of slots
  dma: edma: Leave linked to Null slot instead of DUMMY slot
  dma: edma: Find missed events and issue them
  ARM: edma: Add function to manually trigger an EDMA channel
  dma: edma: Write out and handle MAX_NR_SG at a given time
  dma: edma: Setup parameters to DMA MAX_NR_SG at a time
  dmaengine: pl330: use dma_set_max_seg_size to set the sg limit
  dmaengine: dma_slave_caps: remove sg entries
  dma: replace devm_request_and_ioremap by devm_ioremap_resource
  dma: ste_dma40: Fix potential null pointer dereference
  dma: ste_dma40: Remove duplicate const
  dma: imx-dma: Remove redundant NULL check
  dma: dmagengine: fix function names in comments
  dma: add driver for R-Car HPB-DMAC
  dma: k3dma: use devm_ioremap_resource() instead of devm_request_and_ioremap()
  dma: imx-sdma: Staticize sdma_driver_data structures
  pch_dma: Add MODULE_DEVICE_TABLE
  dmaengine: PL08x: Add cyclic transfer support
  dmaengine: PL08x: Fix reading the byte count in cctl
  dmaengine: PL08x: Add support for different maximum transfer size
  ...

Pull MMC updates from Chris Ball:
 "MMC highlights for 3.12:

  Core:
   - Support Allocation Units 8MB-64MB in SD3.0, previous max was 4MB.
   - The slot-gpio helper can now handle GPIO debouncing card-detect.
   - Read supported voltages from DT "voltage-ranges" property.

  Drivers:
   - dw_mmc: Add support for ARC architecture, and support exynos5420.
   - mmc_spi: Support CD/RO GPIOs.
   - sh_mobile_sdhi: Add compatibility for more Renesas SoCs.
   - sh_mmcif: Add DT support for DMA channels"

* tag 'mmc-updates-for-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (50 commits)
  Revert "mmc: tmio-mmc: Remove .set_pwr() callback from platform data"
  mmc: dw_mmc: Add support for ARC
  mmc: sdhci-s3c: initialize host->quirks2 for using quirks2
  mmc: sdhci-s3c: fix the wrong register value, when clock is disabled
  mmc: esdhc: add support to get voltage from device-tree
  mmc: sdhci: get voltage from sdhc host
  mmc: core: parse voltage from device-tree
  mmc: omap_hsmmc: use the generic config for omap2plus devices
  mmc: omap_hsmmc: clear status flags before starting a new command
  mmc: dw_mmc: exynos: Add a new compatible string for exynos5420
  mmc: sh_mmcif: revision-specific CLK_CTRL2 handling
  mmc: sh_mmcif: revision-specific Command Completion Signal handling
  mmc: sh_mmcif: add support for Device Tree DMA bindings
  mmc: sh_mmcif: move header include from header into .c
  mmc: SDHI: add DT compatibility strings for further SoCs
  mmc: dw_mmc-pci: enable bus-mastering mode
  mmc: dw_mmc-pci: get resources from a proper BAR
  mmc: tmio-mmc: Remove .set_pwr() callback from platform data
  mmc: tmio-mmc: Remove .get_cd() callback from platform data
  mmc: sh_mobile_sdhi: Remove .set_pwr() callback from platform data
  ...

Pull device-mapper updates from Mike Snitzer:
 "Add the ability to collect I/O statistics on user-defined regions of a
  device-mapper device.  This dm-stats code required the reintroduction
  of a div64_u64_rem() helper, but as a separate method that doesn't
  slow down div64_u64() -- especially on 32-bit systems.

  Allow the error target to replace request-based DM devices (e.g.
  multipath) in addition to bio-based DM devices.

  Various other small code fixes and improvements to thin-provisioning,
  DM cache and the DM ioctl interface"

* tag 'dm-3.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm stripe: silence a couple sparse warnings
  dm: add statistics support
  dm thin: always return -ENOSPC if no_free_space is set
  dm ioctl: cleanup error handling in table_load
  dm ioctl: increase granularity of type_lock when loading table
  dm ioctl: prevent rename to empty name or uuid
  dm thin: set pool read-only if breaking_sharing fails block allocation
  dm thin: prefix pool error messages with pool device name
  dm: allow error target to replace bio-based and request-based targets
  math64: New separate div64_u64_rem helper
  dm space map: optimise sm_ll_dec and sm_ll_inc
  dm btree: prefetch child nodes when walking tree for a dm_btree_del
  dm btree: use pop_frame in dm_btree_del to cleanup code
  dm cache: eliminate holes in cache structure
  dm cache: fix stacking of geometry limits
  dm thin: fix stacking of geometry limits
  dm thin: add data block size limits to Documentation
  dm cache: add data block size limits to code and Documentation
  dm cache: document metadata device is exclussive to a cache
  dm: stop using WQ_NON_REENTRANT

Pull md update from Neil Brown:
 "Headline item is multithreading for RAID5 so that more IO/sec can be
  supported on fast (SSD) devices.  Also TILE-Gx SIMD suppor for RAID6
  calculations and an assortment of bug fixes"

* tag 'md/3.12' of git://neil.brown.name/md:
  raid5: only wakeup necessary threads
  md/raid5: flush out all pending requests before proceeding with reshape.
  md/raid5: use seqcount to protect access to shape in make_request.
  raid5: sysfs entry to control worker thread number
  raid5: offload stripe handle to workqueue
  raid5: fix stripe release order
  raid5: make release_stripe lockless
  md: avoid deadlock when dirty buffers during md_stop.
  md: Don't test all of mddev->flags at once.
  md: Fix apparent cut-and-paste error in super_90_validate
  raid6/test: replace echo -e with printf
  RAID: add tilegx SIMD implementation of raid6
  md: fix safe_mode buglet.
  md: don't call md_allow_write in get_bitmap_file.

Pull vfs pile 3 (of many) from Al Viro:
 "Waiman's conversion of d_path() and bits related to it,
  kern_path_mountpoint(), several cleanups and fixes (exportfs
  one is -stable fodder, IMO).

  There definitely will be more...  ;-/"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  split read_seqretry_or_unlock(), convert d_walk() to resulting primitives
  dcache: Translating dentry into pathname without taking rename_lock
  autofs4 - fix device ioctl mount lookup
  introduce kern_path_mountpoint()
  rename user_path_umountat() to user_path_mountpoint_at()
  take unlazy_walk() into umount_lookup_last()
  Kill indirect include of file.h from eventfd.h, use fdget() in cgroup.c
  prune_super(): sb->s_op is never NULL
  exportfs: don't assume that ->iterate() won't feed us too long entries
  afs: get rid of redundant ->d_name.len checks

When I moved the RCU walk termination into unlazy_walk(), I didn't copy
quite all of it: for the successful RCU termination we properly add the
necessary reference counts to our temporary copy of the root path, but
for the failure case we need to make sure that any temporary root path
information is cleared out (since it does _not_ have the proper
reference counts from the RCU lookup).

We could clean up this mess by just always dropping the temporary root
information, but Al points out that that would mean that a single lookup
through symlinks could see multiple different root entries if it races
with another thread doing chroot.  Not that I think we should really
care (we had that before too, back before we had a copy of the root path
in the nameidata).

Al says he has a cunning plan.  In the meantime, this is the minimal fix
for the problem, even if it's not all that pretty.
Reported-by: Mace Moneta <moneta.mace@gmail.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>

Copied from frv.
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>

CC: Mikael Starvik <starvik@axis.com>
CC: linux-cris-kernel@axis.com
Signed-off-by: Jonas Bonn <jonas@southpole.se>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>

These legacy drivers were removed in commit
9c75fc8c ("CRIS: Remove legacy RTC
drivers"). Now remove their last traces in two Kconfig files and one
Makefile.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jesper Nilsson <jespern@axis.com>

The Kconfig symbol OOM_REBOOT got added in v2.6.25. It has never been
used. Its entry can safely be removed.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>

Casting the return value which is a void pointer is redundant.
The conversion from void pointer to any other pointer type is
guaranteed by the C programming language.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

This gets rid of this warning:

drivers/hwmon/hwmon-vid.c: In function 'get_via_model_d_vrm':
drivers/hwmon/hwmon-vid.c:249:27: warning: variable 'dummy' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jean Delvare <khali@linux-fr.org>