- 25 May, 2019 40 commits
-
-
Helen Koike authored
commit 8e890c1a upstream. dm-init should allow up to DM_MAX_{DEVICES,TARGETS} for devices/targets, and not DM_MAX_{DEVICES,TARGETS} - 1. Fix the checks and also fix the error message when the number of devices is surpassed. Fixes: 6bbc923d ("dm: add support to directly boot to a mapped device") Cc: stable@vger.kernel.org Signed-off-by:
Helen Koike <helen.koike@collabora.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Damien Le Moal authored
commit 7aedf75f upstream. The function blkdev_report_zones() returns success even if no zone information is reported (empty report). Empty zone reports can only happen if the report start sector passed exceeds the device capacity. The conditions for this to happen are either a bug in the caller code, or, a change in the device that forced the low level driver to change the device capacity to a value that is lower than the report start sector. This situation includes a failed disk revalidation resulting in the disk capacity being changed to 0. If this change happens while dm-zoned is in its initialization phase executing dmz_init_zones(), this function may enter an infinite loop and hang the system. To avoid this, add a check to disallow empty zone reports and bail out early. Also fix the function dmz_update_zone() to make sure that the report for the requested zone was correctly obtained. Fixes: 3b1a94c8 ("dm zoned: drive-managed zoned block device target") Cc: stable@vger.kernel.org Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by:
Shaun Tancheff <shaun@tancheff.com> Signed-off-by:
-
Nikos Tsironis authored
commit e28adc3b upstream. Add missing dm_bitset_cursor_next() to properly advance the bitset cursor. Otherwise, the discarded state of all blocks is set according to the discarded state of the first block. Fixes: ae4a46a1 ("dm cache metadata: use bitset cursor api to load discard bitset") Cc: stable@vger.kernel.org Signed-off-by:
Nikos Tsironis <ntsironis@arrikto.com> Signed-off-by:
-
Stefan Mätje authored
commit 4ec73791 upstream. Due to an erratum in some Pericom PCIe-to-PCI bridges in reverse mode (conventional PCI on primary side, PCIe on downstream side), the Retrain Link bit needs to be cleared manually to allow the link training to complete successfully. If it is not cleared manually, the link training is continuously restarted and no devices below the PCI-to-PCIe bridge can be accessed. That means drivers for devices below the bridge will be loaded but won't work and may even crash because the driver is only reading 0xffff. See the Pericom Errata Sheet PI7C9X111SLB_errata_rev1.2_102711.pdf for details. Devices known as affected so far are: PI7C9X110, PI7C9X111SL, PI7C9X130. Add a new flag, clear_retrain_link, in struct pci_dev. Quirks for affected devices set this bit. Note that pcie_retrain_link() lives in aspm.c because that's currently the only place we use it, but this erratum is not specific to ASPM, and we may retrain links for other reasons in the future. Signed-off-by:
Stefan Mätje <stefan.maetje@esd.eu> [bhelgaas: apply regardless of CONFIG_PCIEASPM] Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> CC: stable@vger.kernel.org Signed-off-by:
-
Stefan Mätje authored
commit 86fa6a34 upstream. Factor out pcie_retrain_link() to use for Pericom Retrain Link quirk. No functional change intended. Signed-off-by:
-
Kazufumi Ikeda authored
commit be20bbcb upstream. Reestablish the PCIe link very early in the resume process in case it went down to prevent PCI accesses from hanging the bus. Such accesses can happen early in the PCI resume process, as early as the SUSPEND_RESUME_NOIRQ step, thus the link must be reestablished in the driver resume_noirq() callback. Fixes: e015f88c ("PCI: rcar: Add support for R-Car H3 to pcie-rcar") Signed-off-by:
Kazufumi Ikeda <kaz-ikeda@xc.jp.nec.com> Signed-off-by:
Gaku Inami <gaku.inami.xw@bp.renesas.com> Signed-off-by:
Marek Vasut <marek.vasut+renesas@gmail.com> [lorenzo.pieralisi@arm.com: reformatted commit log] Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: stable@vger.kernel.org Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Phil Edworthy <phil.edworthy@renesas.com> Cc: Simon Horman <horms+renesas@verge.net.au> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: linux-renesas-soc@vger.kernel.org Signed-off-by:
-
Jisheng Zhang authored
commit 31f996ef upstream. Commit 60ed982a ("PCI/AER: Move internal declarations to drivers/pci/pci.h") changed pci_aer_init() to return "void", but didn't change the stub for when CONFIG_PCIEAER isn't enabled. Change the stub to match. Fixes: 60ed982a ("PCI/AER: Move internal declarations to drivers/pci/pci.h") Signed-off-by:
Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by:
-
Jean-Philippe Brucker authored
commit 6302bf3e upstream. Two functions allocate a host bridge: devm_pci_alloc_host_bridge() and pci_alloc_host_bridge(). At the moment, only the unmanaged one initializes the PCIe feature bits, which prevents from using features such as hotplug or AER on some systems, when booting with device tree. Make the initialization code common. Fixes: 02bfeb48 ("PCI/portdrv: Simplify PCIe feature permission checking") Signed-off-by:
Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by:
-
Lyude Paul authored
commit e0547c81 upstream. On ThinkPad P50 SKUs with an Nvidia Quadro M1000M instead of the M2000M variant, the BIOS does not always reset the secondary Nvidia GPU during reboot if the laptop is configured in Hybrid Graphics mode. The reason is unknown, but the following steps and possibly a good bit of patience will reproduce the issue: 1. Boot up the laptop normally in Hybrid Graphics mode 2. Make sure nouveau is loaded and that the GPU is awake 3. Allow the Nvidia GPU to runtime suspend itself after being idle 4. Reboot the machine, the more sudden the better (e.g. sysrq-b may help) 5. If nouveau loads up properly, reboot the machine again and go back to step 2 until you reproduce the issue This results in some very strange behavior: the GPU will be left in exactly the same state it was in when the previously booted kernel started the reboot. This has all sorts of bad side effects: for starters, this completely breaks nouveau starting with a mysterious EVO channel failure that happens well before we've actually used the EVO channel for anything: nouveau 0000:01:00.0: disp: chid 0 mthd 0000 data 00000400 00001000 00000002 This causes a timeout trying to bring up the GR ctx: nouveau 0000:01:00.0: timeout WARNING: CPU: 0 PID: 12 at drivers/gpu/drm/nouveau/nvkm/engine/gr/ctxgf100.c:1547 gf100_grctx_generate+0x7b2/0x850 [nouveau] Hardware name: LENOVO 20EQS64N0B/20EQS64N0B, BIOS N1EET82W (1.55 ) 12/18/2018 Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper] ... nouveau 0000:01:00.0: gr: wait for idle timeout (en: 1, ctxsw: 0, busy: 1) nouveau 0000:01:00.0: gr: wait for idle timeout (en: 1, ctxsw: 0, busy: 1) nouveau 0000:01:00.0: fifo: fault 01 [WRITE] at 0000000000008000 engine 00 [GR] client 15 [HUB/SCC_NB] reason c4 [] on channel -1 [0000000000 unknown] The GPU never manages to recover. Booting without loading nouveau causes issues as well, since the GPU starts sending spurious interrupts that cause other device's IRQs to get disabled by the kernel: irq 16: nobody cared (try booting with the "irqpoll" option) ... handlers: [<000000007faa9e99>] i801_isr [i2c_i801] Disabling IRQ #16 ... serio: RMI4 PS/2 pass-through port at rmi4-00.fn03 i801_smbus 0000:00:1f.4: Timeout waiting for interrupt! i801_smbus 0000:00:1f.4: Transaction timeout rmi4_f03 rmi4-00.fn03: rmi_f03_pt_write: Failed to write to F03 TX register (-110). i801_smbus 0000:00:1f.4: Timeout waiting for interrupt! i801_smbus 0000:00:1f.4: Transaction timeout rmi4_physical rmi4-00: rmi_driver_set_irq_bits: Failed to change enabled interrupts! This causes the touchpad and sometimes other things to get disabled. Since this happens without nouveau, we can't fix this problem from nouveau itself. Add a PCI quirk for the specific P50 variant of this GPU. Make sure the GPU is advertising NoReset- so we don't reset the GPU when the machine is in Dedicated graphics mode (where the GPU being initialized by the BIOS is normal and expected). Map the GPU MMIO space and read the magic 0x2240c register, which will have bit 1 set if the device was POSTed during a previous boot. Once we've confirmed all of this, reset the GPU and re-disable it - bringing it back to a healthy state. Link: https://bugzilla.kernel.org/show_bug.cgi?id=203003 Link: https://lore.kernel.org/lkml/20190212220230.1568-1-lyude@redhat.comSigned-off-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
-
James Prestwood authored
commit 6afb7e26 upstream. When using PCI passthrough with this device, the host machine locks up completely when starting the VM, requiring a hard reboot. Add a quirk to avoid bus resets on this device. Fixes: c3e59ee4 ("PCI: Mark Atheros AR93xx to avoid bus reset") Link: https://lore.kernel.org/linux-pci/20190107213248.3034-1-james.prestwood@linux.intel.comSigned-off-by:
James Prestwood <james.prestwood@linux.intel.com> Signed-off-by:
-
Nikolai Kostrigin authored
commit d28ca864 upstream. ATS is broken on the Radeon R7 GPU (at least for Stoney Ridge based laptop) and causes IOMMU stalls and system failure. Disable ATS on these devices to make them usable again with IOMMU enabled. Thanks to Joerg Roedel <jroedel@suse.de> for help. [bhelgaas: In the email thread mentioned below, Alex suspects the real problem is in sbios or iommu, so it may affect only certain systems, and it may affect other devices in those systems as well. However, per Joerg we lack the ability to debug further, so this quirk is the best we can do for now.] Link: https://bugzilla.kernel.org/show_bug.cgi?id=194521 Link: https://lore.kernel.org/lkml/20190408103725.30426-1-nickel@altlinux.org Fixes: 9b44b0b0 ("PCI: Mark AMD Stoney GPU ATS as broken") Signed-off-by:
Nikolai Kostrigin <nickel@altlinux.org> Signed-off-by:
Joerg Roedel <jroedel@suse.de> CC: stable@vger.kernel.org Signed-off-by:
-
Yifeng Li authored
commit f627caf5 upstream. On a Thinkpad s30 (Pentium III / i440MX, Lynx3DM), blanking the display or starting the X server will crash and freeze the system, or garble the display. Experiments showed this problem can mostly be solved by adjusting the order of register writes. Also, sm712fb failed to consider the difference of clock frequency when unblanking the display, and programs the clock for SM712 to SM720. Fix them by adjusting the order of register writes, and adding an additional check for SM720 for programming the clock frequency. Signed-off-by:
Yifeng Li <tomli@tomli.me> Tested-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Cc: Teddy Wang <teddy.wang@siliconmotion.com> Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Yifeng Li authored
commit 4ed7d2cc upstream. Loongson MIPS netbooks use 1024x600 LCD panels, which is the original target platform of this driver, but nearly all old x86 laptops have 1024x768. Lighting 768 panels using 600's timings would partially garble the display. Since it's not possible to distinguish them reliably, we change the default to 768, but keep 600 as-is on MIPS. Further, earlier laptops, such as IBM Thinkpad 240X, has a 800x600 LCD panel, this driver would probably garbled those display. As we don't have one for testing, the original behavior of the driver is kept as-is, but the problem has been documented is the comments. Signed-off-by:
-
Yifeng Li authored
commit 6053d3a4 upstream. In order to support the 1024x600 panel on Yeeloong Loongson MIPS laptop, the original 1024x768-16 table was modified to 1024x600-16, without leaving the original. It causes problem on x86 laptop as the 1024x768-16 support was still claimed but not working. Fix it by introducing the 1024x768-16 mode. Signed-off-by:
-
Yifeng Li authored
commit 9e0e5999 upstream. On a Thinkpad s30 (Pentium III / i440MX, Lynx3DM), running fbtest or X will crash the machine instantly, because the VRAM/framebuffer is not mapped correctly. On SM712, the framebuffer starts at the beginning of address space, but SM720's framebuffer starts at the 1 MiB offset from the beginning. However, sm712fb fails to take this into account, as a result, writing to the framebuffer will destroy all the registers and kill the system immediately. Another problem is the driver assumes 8 MiB of VRAM for SM720, but some SM720 system, such as this IBM Thinkpad, only has 4 MiB of VRAM. Fix this problem by removing the hardcoded VRAM size, adding a function to query the amount of VRAM from register MCR76 on SM720, and adding proper framebuffer offset. Please note that the memory map may have additional problems on Big-Endian system, which is not available for testing by myself. But I highly suspect that the original code is also broken on Big-Endian machines for SM720, so at least we are not making the problem worse. More, the driver also assumed SM710/SM712 has 4 MiB of VRAM, but it has a 2 MiB version as well, and used in earlier laptops, such as IBM Thinkpad 240X, the driver would probably crash on them. I've never seen one of those machines and cannot fix it, but I have documented these problems in the comments. Signed-off-by:
-
Yifeng Li authored
commit ec1587d5 upstream. When the machine is booted in VGA mode, loading sm712fb would cause a glitch of random pixels shown on the screen. To prevent it from happening, we first clear the entire framebuffer, and we also need to stop calling smtcfb_setmode() during initialization, the fbdev layer will call it for us later when it's ready. Signed-off-by:
-
Yifeng Li authored
commit 80690538 upstream. On a Thinkpad s30 (Pentium III / i440MX, Lynx3DM), rebooting with sm712fb framebuffer driver would cause a white screen of death on the next POST, presumably the proper timings for the LCD panel was not reprogrammed properly by the BIOS. Experiments showed a few CRTC Scratch Registers, including CRT3D, CRT3E and CRT3F may be used internally by BIOS as some flags. CRT3B is a hardware testing register, we shouldn't mess with it. CRT3C has blanking signal and line compare control, which is not needed for this driver. Stop writing to CR3B-CR3F (a.k.a CRT3B-CRT3F) registers. Even if these registers don't have side-effect on other systems, writing to them is also highly questionable. Signed-off-by:
-
Yifeng Li authored
commit dcf90705 upstream. On a Thinkpad s30 (Pentium III / i440MX, Lynx3DM), the amount of Video RAM is not detected correctly by the xf86-video-siliconmotion driver. This is because sm712fb overwrites the GPR71 Scratch Pad Register, which is set by BIOS on x86 and used to indicate amount of VRAM. Other Scratch Pad Registers, including GPR70/74/75, don't have the same side-effect, but overwriting to them is still questionable, as they are not related to modesetting. Stop writing to SR70/71/74/75 (a.k.a GPR70/71/74/75). Signed-off-by:
-
Yifeng Li authored
commit 5481115e upstream. On a Thinkpad s30 (Pentium III / i440MX, Lynx3DM), rebooting with sm712fb framebuffer driver would cause the role of brightness up/down button to swap. Experiments showed the FPR30 register caused this behavior. Moreover, even if this register don't have side-effect on other systems, over- writing it is also highly questionable, since it was originally configurated by the motherboard manufacturer by hardwiring pull-down resistors to indicate the type of LCD panel. We should not mess with it. Stop writing to the SR30 (a.k.a FPR30) register. Signed-off-by:
-
Ard Biesheuvel authored
commit f8585539 upstream. The following commit: 38ac0287 ("fbdev/efifb: Honour UEFI memory map attributes when mapping the FB") updated the EFI framebuffer code to use memory mappings for the linear framebuffer that are permitted by the memory attributes described by the EFI memory map for the particular region, if the framebuffer happens to be covered by the EFI memory map (which is typically only the case for framebuffers in shared memory). This is required since non-x86 systems may require cacheable attributes for memory mappings that are shared with other masters (such as GPUs), and this information cannot be described by the Graphics Output Protocol (GOP) EFI protocol itself, and so we rely on the EFI memory map for this. As reported by James, this breaks some x86 systems: [ 1.173368] efifb: probing for efifb [ 1.173386] efifb: abort, cannot remap video memory 0x1d5000 @ 0xcf800000 [ 1.173395] Trying to free nonexistent resource <00000000cf800000-00000000cf9d4bff> [ 1.173413] efi-framebuffer: probe of efi-framebuffer.0 failed with error -5 The problem turns out to be that the memory map entry that describes the framebuffer has no memory attributes listed at all, and so we end up with a mem_flags value of 0x0. So work around this by ensuring that the memory map entry's attribute field has a sane value before using it to mask the set of usable attributes. Reported-by:
James Hilliard <james.hilliard1@gmail.com> Tested-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: <stable@vger.kernel.org> # v4.19+ Cc: Borislav Petkov <bp@alien8.de> Cc: James Morse <james.morse@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Jones <pjones@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Fixes: 38ac0287 ("fbdev/efifb: Honour UEFI memory map attributes when ...") Link: http://lkml.kernel.org/r/20190516213159.3530-2-ard.biesheuvel@linaro.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Dave Hansen authored
commit 5a28fc94 upstream. This is a bit of a mess, to put it mildly. But, it's a bug that only seems to have showed up in 4.20 but wasn't noticed until now, because nobody uses MPX. MPX has the arch_unmap() hook inside of munmap() because MPX uses bounds tables that protect other areas of memory. When memory is unmapped, there is also a need to unmap the MPX bounds tables. Barring this, unused bounds tables can eat 80% of the address space. But, the recursive do_munmap() that gets called vi arch_unmap() wreaks havoc with __do_munmap()'s state. It can result in freeing populated page tables, accessing bogus VMA state, double-freed VMAs and more. See the "long story" further below for the gory details. To fix this, call arch_unmap() before __do_unmap() has a chance to do anything meaningful. Also, remove the 'vma' argument and force the MPX code to do its own, independent VMA lookup. == UML / unicore32 impact == Remove unused 'vma' argument to arch_unmap(). No functional change. I compile tested this on UML but not unicore32. == powerpc impact == powerpc uses arch_unmap() well to watch for munmap() on the VDSO and zeroes out 'current->mm->context.vdso_base'. Moving arch_unmap() makes this happen earlier in __do_munmap(). But, 'vdso_base' seems to only be used in perf and in the signal delivery that happens near the return to userspace. I can not find any likely impact to powerpc, other than the zeroing happening a little earlier. powerpc does not use the 'vma' argument and is unaffected by its removal. I compile-tested a 64-bit powerpc defconfig. == x86 impact == For the common success case this is functionally identical to what was there before. For the munmap() failure case, it's possible that some MPX tables will be zapped for memory that continues to be in use. But, this is an extraordinarily unlikely scenario and the harm would be that MPX provides no protection since the bounds table got reset (zeroed). I can't imagine anyone doing this: ptr = mmap(); // use ptr ret = munmap(ptr); if (ret) // oh, there was an error, I'll // keep using ptr. Because if you're doing munmap(), you are *done* with the memory. There's probably no good data in there _anyway_. This passes the original reproducer from Richard Biener as well as the existing mpx selftests/. The long story: munmap() has a couple of pieces: 1. Find the affected VMA(s) 2. Split the start/end one(s) if neceesary 3. Pull the VMAs out of the rbtree 4. Actually zap the memory via unmap_region(), including freeing page tables (or queueing them to be freed). 5. Fix up some of the accounting (like fput()) and actually free the VMA itself. This specific ordering was actually introduced by: dd2283f2 ("mm: mmap: zap pages with read mmap_sem in munmap") during the 4.20 merge window. The previous __do_munmap() code was actually safe because the only thing after arch_unmap() was remove_vma_list(). arch_unmap() could not see 'vma' in the rbtree because it was detached, so it is not even capable of doing operations unsafe for remove_vma_list()'s use of 'vma'. Richard Biener reported a test that shows this in dmesg: [1216548.787498] BUG: Bad rss-counter state mm:0000000017ce560b idx:1 val:551 [1216548.787500] BUG: non-zero pgtables_bytes on freeing mm: 24576 What triggered this was the recursive do_munmap() called via arch_unmap(). It was freeing page tables that has not been properly zapped. But, the problem was bigger than this. For one, arch_unmap() can free VMAs. But, the calling __do_munmap() has variables that *point* to VMAs and obviously can't handle them just getting freed while the pointer is still in use. I tried a couple of things here. First, I tried to fix the page table freeing problem in isolation, but I then found the VMA issue. I also tried having the MPX code return a flag if it modified the rbtree which would force __do_munmap() to re-walk to restart. That spiralled out of control in complexity pretty fast. Just moving arch_unmap() and accepting that the bonkers failure case might eat some bounds tables seems like the simplest viable fix. This was also reported in the following kernel bugzilla entry: https://bugzilla.kernel.org/show_bug.cgi?id=203123 There are some reports that this commit triggered this bug: dd2283f2 ("mm: mmap: zap pages with read mmap_sem in munmap") While that commit certainly made the issues easier to hit, I believe the fundamental issue has been with us as long as MPX itself, thus the Fixes: tag below is for one of the original MPX commits. [ mingo: Minor edits to the changelog and the patch. ] Reported-by:
Richard Biener <rguenther@suse.de> Reported-by:
H.J. Lu <hjl.tools@gmail.com> Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Yang Shi <yang.shi@linux.alibaba.com> Acked-by:
Michael Ellerman <mpe@ellerman.id.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: linux-arch@vger.kernel.org Cc: linux-mm@kvack.org Cc: linux-um@lists.infradead.org Cc: linuxppc-dev@lists.ozlabs.org Cc: stable@vger.kernel.org Fixes: dd2283f2 ("mm: mmap: zap pages with read mmap_sem in munmap") Link: http://lkml.kernel.org/r/20190419194747.5E1AD6DC@viggo.jf.intel.comSigned-off-by:
-
Nathan Chancellor authored
commit 8ea58f1e upstream. Currently, this Makefile hardcodes GNU ar, meaning that if it is not available, there is no way to supply a different one and the build will fail. $ make AR=llvm-ar CC=clang LD=ld.lld HOSTAR=llvm-ar HOSTCC=clang \ HOSTLD=ld.lld HOSTLDFLAGS=-fuse-ld=lld defconfig modules_prepare ... AR /out/tools/objtool/libsubcmd.a /bin/sh: 1: ar: not found ... Follow the logic of HOST{CC,LD} and allow the user to specify a different ar tool via HOSTAR (which is used elsewhere in other tools/ Makefiles). Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Cc: <stable@vger.kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/80822a9353926c38fd7a152991c6292491a9d0e8.1558028966.git.jpoimboe@redhat.com Link: https://github.com/ClangBuiltLinux/linux/issues/481Signed-off-by:
-
Florian Fainelli authored
commit 1b1f01b6 upstream. arch/mips/kernel/perf_event_mipsxx.c: In function 'mipsxx_pmu_enable_event': arch/mips/kernel/perf_event_mipsxx.c:326:21: error: unused variable 'event' [-Werror=unused-variable] struct perf_event *event = container_of(evt, struct perf_event, hw); ^~~~~ Fix this by making use of IS_ENABLED() to simplify the code and avoid unnecessary ifdefery. Fixes: 84002c88 ("MIPS: perf: Fix perf with MT counting other threads") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Paul Burton <paul.burton@mips.com> Cc: linux-mips@linux-mips.org Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@vger.kernel.org Cc: stable@vger.kernel.org # v4.18+ Signed-off-by:
-
Adrian Hunter authored
commit 1b6599a9 upstream. The sample timestamp is updated to ensure that the timestamp represents the time of the sample and not a branch that the decoder is still walking towards. The sample timestamp is updated when the decoder returns, but the decoder does not return for non-taken branches. Update the sample timestamp then also. Note that commit 3f04d98e ("perf intel-pt: Improve sample timestamp") was also a stable fix and appears, for example, in v4.4 stable tree as commit a4ebb58f ("perf intel-pt: Improve sample timestamp"). Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org # v4.4+ Fixes: 3f04d98e ("perf intel-pt: Improve sample timestamp") Link: http://lkml.kernel.org/r/20190510124143.27054-4-adrian.hunter@intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Adrian Hunter authored
commit 61b6e08d upstream. The decoder uses its current timestamp in samples. Usually that is a timestamp that has already passed, but in some cases it is a timestamp for a branch that the decoder is walking towards, and consequently hasn't reached. The intel_pt_sample_time() function decides which is which, but was not handling TNT packets exactly correctly. In the case of TNT, the timestamp applies to the first branch, so the decoder must first walk to that branch. That means intel_pt_sample_time() should return true for TNT, and this patch makes that change. However, if the first branch is a non-taken branch (i.e. a 'N'), then intel_pt_sample_time() needs to return false for subsequent taken branches in the same TNT packet. To handle that, introduce a new state INTEL_PT_STATE_TNT_CONT to distinguish the cases. Note that commit 3f04d98e ("perf intel-pt: Improve sample timestamp") was also a stable fix and appears, for example, in v4.4 stable tree as commit a4ebb58f ("perf intel-pt: Improve sample timestamp"). Signed-off-by:
-
Adrian Hunter authored
commit 7ba8fa20 upstream. The timestamp used to determine if an instruction sample is made, is an estimate based on the number of instructions since the last known timestamp. A consequence is that it might go backwards, which results in extra samples. Change it so that a sample is only made when the timestamp goes forwards. Note this does not affect a sampling period of 0 or sampling periods specified as a count of instructions. Example: Before: $ perf script --itrace=i10us ls 13812 [003] 2167315.222583: 3270 instructions:u: 7fac71e2e494 __GI___tunables_init+0xf4 (/lib/x86_64-linux-gnu/ld-2.28.so) ls 13812 [003] 2167315.222667: 30902 instructions:u: 7fac71e2da0f _dl_cache_libcmp+0x2f (/lib/x86_64-linux-gnu/ld-2.28.so) ls 13812 [003] 2167315.222667: 10 instructions:u: 7fac71e2d9ff _dl_cache_libcmp+0x1f (/lib/x86_64-linux-gnu/ld-2.28.so) ls 13812 [003] 2167315.222667: 8 instructions:u: 7fac71e2d9ea _dl_cache_libcmp+0xa (/lib/x86_64-linux-gnu/ld-2.28.so) ls 13812 [003] 2167315.222667: 14 instructions:u: 7fac71e2d9ea _dl_cache_libcmp+0xa (/lib/x86_64-linux-gnu/ld-2.28.so) ls 13812 [003] 2167315.222667: 6 instructions:u: 7fac71e2d9ff _dl_cache_libcmp+0x1f (/lib/x86_64-linux-gnu/ld-2.28.so) ls 13812 [003] 2167315.222667: 14 instructions:u: 7fac71e2d9ff _dl_cache_libcmp+0x1f (/lib/x86_64-linux-gnu/ld-2.28.so) ls 13812 [003] 2167315.222667: 4 instructions:u: 7fac71e2dab2 _dl_cache_libcmp+0xd2 (/lib/x86_64-linux-gnu/ld-2.28.so) ls 13812 [003] 2167315.222728: 16423 instructions:u: 7fac71e2477a _dl_map_object_deps+0x1ba (/lib/x86_64-linux-gnu/ld-2.28.so) ls 13812 [003] 2167315.222734: 12731 instructions:u: 7fac71e27938 _dl_name_match_p+0x68 (/lib/x86_64-linux-gnu/ld-2.28.so) ... After: $ perf script --itrace=i10us ls 13812 [003] 2167315.222583: 3270 instructions:u: 7fac71e2e494 __GI___tunables_init+0xf4 (/lib/x86_64-linux-gnu/ld-2.28.so) ls 13812 [003] 2167315.222667: 30902 instructions:u: 7fac71e2da0f _dl_cache_libcmp+0x2f (/lib/x86_64-linux-gnu/ld-2.28.so) ls 13812 [003] 2167315.222728: 16479 instructions:u: 7fac71e2477a _dl_map_object_deps+0x1ba (/lib/x86_64-linux-gnu/ld-2.28.so) ... Signed-off-by:
-
Dmitry Osipenko authored
commit b906c056 upstream. Multiplying the Memory Controller clock rate by the tick count results in an integer overflow and in result the truncated tick value is being programmed into hardware, such that the GR3D memory client performance is reduced by two times. Cc: stable <stable@vger.kernel.org> Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Masami Hiramatsu authored
commit 3dd1f7f2 upstream. Fix to make the type of $comm "string". If we set the other type to $comm argument, it shows meaningless value or wrong data. Currently probe events allow us to set string array type (e.g. ":string[2]"), or other digit types like x8 on $comm. But since clearly $comm is just a string data, it should not be fetched by other types including array. Link: http://lkml.kernel.org/r/155723736241.9149.14582064184468574539.stgit@devnote2 Cc: Andreas Ziegler <andreas.ziegler@fau.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: stable@vger.kernel.org Fixes: 53305928 ("tracing: probeevent: Introduce new argument fetching code") Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Elazar Leibovich authored
commit cbe08bcb upstream. When reading only part of the id file, the ppos isn't tracked correctly. This is taken care by simple_read_from_buffer. Reading a single byte, and then the next byte would result EOF. While this seems like not a big deal, this breaks abstractions that reads information from files unbuffered. See for example https://github.com/golang/go/issues/29399 This code was mentioned as problematic in commit cd458ba9 ("tracing: Do not (ab)use trace_seq in event_id_read()") An example C code that show this bug is: #include <stdio.h> #include <stdint.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> int main(int argc, char **argv) { if (argc < 2) return 1; int fd = open(argv[1], O_RDONLY); char c; read(fd, &c, 1); printf("First %c\n", c); read(fd, &c, 1); printf("Second %c\n", c); } Then run with, e.g. sudo ./a.out /sys/kernel/debug/tracing/events/tcp/tcp_set_state/id You'll notice you're getting the first character twice, instead of the first two characters in the id file. Link: http://lkml.kernel.org/r/20181231115837.4932-1-elazar@lightbitslabs.com Cc: Orit Wasserman <orit.was@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: stable@vger.kernel.org Fixes: 23725aee ("ftrace: provide an id file for each event") Signed-off-by:
Elazar Leibovich <elazar@lightbitslabs.com> Signed-off-by:
-
Peter Zijlstra authored
commit 9e298e86 upstream. Nicolai Stange discovered[1] that if live kernel patching is enabled, and the function tracer started tracing the same function that was patched, the conversion of the fentry call site during the translation of going from calling the live kernel patch trampoline to the iterator trampoline, would have as slight window where it didn't call anything. As live kernel patching depends on ftrace to always call its code (to prevent the function being traced from being called, as it will redirect it). This small window would allow the old buggy function to be called, and this can cause undesirable results. Nicolai submitted new patches[2] but these were controversial. As this is similar to the static call emulation issues that came up a while ago[3]. But after some debate[4][5] adding a gap in the stack when entering the breakpoint handler allows for pushing the return address onto the stack to easily emulate a call. [1] http://lkml.kernel.org/r/20180726104029.7736-1-nstange@suse.de [2] http://lkml.kernel.org/r/20190427100639.15074-1-nstange@suse.de [3] http://lkml.kernel.org/r/3cf04e113d71c9f8e4be95fb84a510f085aa4afa.1541711457.git.jpoimboe@redhat.com [4] http://lkml.kernel.org/r/CAHk-=wh5OpheSU8Em_Q3Hg8qw_JtoijxOdPtHru6d+5K8TWM=A@mail.gmail.com [5] http://lkml.kernel.org/r/CAHk-=wjvQxY4DvPrJ6haPgAa6b906h=MwZXO6G8OtiTGe=N7_w@mail.gmail.com [ Live kernel patching is not implemented on x86_32, thus the emulate calls are only for x86_64. ] Cc: Andy Lutomirski <luto@kernel.org> Cc: Nicolai Stange <nstange@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: the arch/x86 maintainers <x86@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Petr Mladek <pmladek@suse.com> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Juergen Gross <jgross@suse.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Nayna Jain <nayna@linux.ibm.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: "open list:KERNEL SELFTEST FRAMEWORK" <linux-kselftest@vger.kernel.org> Cc: stable@vger.kernel.org Fixes: b700e7f0 ("livepatch: kernel: add support for live patching") Tested-by:
Nicolai Stange <nstange@suse.de> Reviewed-by:
Peter Zijlstra (Intel) <peterz@infradead.org> [ Changed to only implement emulated calls for x86_64 ] Signed-off-by:
-
Peter Zijlstra authored
commit 4b33dadf upstream. In order to allow breakpoints to emulate call instructions, they need to push the return address onto the stack. The x86_64 int3 handler adds a small gap to allow the stack to grow some. Use this gap to add the return address to be able to emulate a call instruction at the breakpoint location. These helper functions are added: int3_emulate_jmp(): changes the location of the regs->ip to return there. (The next two are only for x86_64) int3_emulate_push(): to push the address onto the gap in the stack int3_emulate_call(): push the return address and change regs->ip Cc: Andy Lutomirski <luto@kernel.org> Cc: Nicolai Stange <nstange@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: the arch/x86 maintainers <x86@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Petr Mladek <pmladek@suse.com> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Juergen Gross <jgross@suse.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Nayna Jain <nayna@linux.ibm.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: "open list:KERNEL SELFTEST FRAMEWORK" <linux-kselftest@vger.kernel.org> Cc: stable@vger.kernel.org Fixes: b700e7f0 ("livepatch: kernel: add support for live patching") Tested-by:
-
Josh Poimboeuf authored
commit 2700fefd upstream. To allow an int3 handler to emulate a call instruction, it must be able to push a return address onto the stack. Add a gap to the stack to allow the int3 handler to push the return address and change the return from int3 to jump straight to the emulated called function target. Link: http://lkml.kernel.org/r/20181130183917.hxmti5josgq4clti@treble Link: http://lkml.kernel.org/r/20190502162133.GX2623@hirez.programming.kicks-ass.net [ Note, this is needed to allow Live Kernel Patching to not miss calling a patched function when tracing is enabled. -- Steven Rostedt ] Cc: stable@vger.kernel.org Fixes: b700e7f0 ("livepatch: kernel: add support for live patching") Tested-by:
-
Jeff Layton authored
commit 00abf69d upstream. xfstest generic/452 was triggering a "Busy inodes after umount" warning. ceph was allowing the mount to go read-only without first flushing out dirty inodes in the cache. Ensure we sync out the filesystem before allowing a remount to proceed. Cc: stable@vger.kernel.org Link: http://tracker.ceph.com/issues/39571Signed-off-by:
Jeff Layton <jlayton@kernel.org> Reviewed-by:
"Yan, Zheng" <zyan@redhat.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Dmitry Osipenko authored
commit 43a0541e upstream. Both Tegra30 and Tegra114 have 4 ASID's and the corresponding bitfield of the TLB_FLUSH register differs from later Tegra generations that have 128 ASID's. In a result the PTE's are now flushed correctly from TLB and this fixes problems with graphics (randomly failing tests) on Tegra30. Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Chris Packham authored
commit 259799ea upstream. Use gen_rtx_set instead of gen_rtx_SET. The former is a wrapper macro that handles the difference between GCC versions implementing the latter. This fixes the following error on my system with g++ 5.4.0 as the host compiler HOSTCXX -fPIC scripts/gcc-plugins/arm_ssp_per_task_plugin.o scripts/gcc-plugins/arm_ssp_per_task_plugin.c:42:14: error: macro "gen_rtx_SET" requires 3 arguments, but only 2 given mask)), ^ scripts/gcc-plugins/arm_ssp_per_task_plugin.c: In function ‘unsigned int arm_pertask_ssp_rtl_execute()’: scripts/gcc-plugins/arm_ssp_per_task_plugin.c:39:20: error: ‘gen_rtx_SET’ was not declared in this scope emit_insn_before(gen_rtx_SET Signed-off-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Fixes: 189af465 ("ARM: smp: add support for per-task stack canaries") Cc: stable@vger.kernel.org Tested-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Amir Goldstein authored
commit 4d8e7055 upstream. __fsnotify_parent() has an optimization in place to avoid unneeded take_dentry_name_snapshot(). When fsnotify_nameremove() was changed not to call __fsnotify_parent(), we left out the optimization. Kernel test robot reported a 5% performance regression in concurrent unlink() workload. Reported-by:
kernel test robot <rong.a.chen@intel.com> Link: https://lore.kernel.org/lkml/20190505062153.GG29809@shao2-debian/ Link: https://lore.kernel.org/linux-fsdevel/20190104090357.GD22409@quack2.suse.cz/ Fixes: 5f02a877 ("fsnotify: annotate directory entry modification events") CC: stable@vger.kernel.org Signed-off-by:
Amir Goldstein <amir73il@gmail.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Amir Goldstein authored
commit 3428030d upstream. Generalize the helper ovl_open_maybe_copy_up() and use it to copy up file with data before FS_IOC_SETFLAGS ioctl. The FS_IOC_SETFLAGS ioctl is a bit of an odd ball in vfs, which probably caused the confusion. File may be open O_RDONLY, but ioctl modifies the file. VFS does not call mnt_want_write_file() nor lock inode mutex, but fs-specific code for FS_IOC_SETFLAGS does. So ovl_ioctl() calls mnt_want_write_file() for the overlay file, and fs-specific code calls mnt_want_write_file() for upper fs file, but there was no call for ovl_want_write() for copy up duration which prevents overlayfs from copying up on a frozen upper fs. Fixes: dab5ca8f ("ovl: add lsattr/chattr support") Cc: <stable@vger.kernel.org> # v4.19 Signed-off-by:
Vivek Goyal <vgoyal@redhat.com> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Liu Bo authored
commit 0cbade02 upstream. fstests generic/228 reported this failure that fuse fallocate does not honor what 'ulimit -f' has set. This adds the necessary inode_newsize_ok() check. Signed-off-by:
Liu Bo <bo.liu@linux.alibaba.com> Fixes: 05ba1f08 ("fuse: add FALLOCATE operation") Cc: <stable@vger.kernel.org> # v3.5 Signed-off-by:
-
Miklos Szeredi authored
commit 9de5be06 upstream. Writepage requests were cropped to i_size & 0xffffffff, which meant that mmaped writes to any file larger than 4G might be silently discarded. Fix by storing the file size in a properly sized variable (loff_t instead of size_t). Reported-by:
Antonio SJ Musumeci <trapexit@spawn.link> Fixes: 6eaf4782 ("fuse: writepages: crop secondary requests") Cc: <stable@vger.kernel.org> # v3.13 Signed-off-by:
-
Mikulas Patocka authored
commit babc250e upstream. Rendering calls may be done simultaneously from the workqueue, dlfb_ops_write, dlfb_ops_ioctl, dlfb_ops_set_par and dlfb_dpy_deferred_io. The code is robust enough so that it won't crash on concurrent rendering. However, concurrent rendering may cause display corruption if the same pixel is simultaneously being rendered. In order to avoid this corruption, this patch adds a mutex around the rendering calls. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: Bernie Thompson <bernie@plugable.com> Cc: Ladislav Michl <ladis@linux-mips.org> Cc: <stable@vger.kernel.org> [b.zolnierkie: replace "dlfb:" with "uldfb:" in the patch summary] Signed-off-by:
-
