- 07 Jan, 2019 40 commits
-
-
Hans de Goede authored
Add quirks module parameter to allow manually specifying quirks from the kernel commandline (or modprobe.conf). Acked-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Hans de Goede authored
Commit 37c7401e ("ASoC: Intel: bytcr_rt5651: Fix DMIC map headsetmic mapping"), changed the headsetmic mapping from IN3P to IN2P, this was based on the observation that all bytcr_rt5651 devices I have access to (7 devices) where all using IN3P for the headsetmic. This was an attempt to unifify / simplify the mapping, but it was wrong. None of those devices was actually using a digital internal mic. Now I've access to a Point of View TAB-P1006W-232 (v1.0) tabler, which does use a DMIC and it does have its headsetmic connected to IN2P, showing that the original mapping was correct, so this commit reverts the change changing the mapping back to IN2P. Fixes: 37c7401e ("ASoC: Intel: bytcr_rt5651: Fix DMIC map ... mapping") Acked-by:
-
Hans de Goede authored
Some board designs hook the jack-detect up to an external GPIO, rather then to one of the codec pins, add support for this. Figuring out which GPIO to use is pretty much board specific so I've chosen to let the machine driver pass the gpio_desc as data argument to snd_soc_component_set_jack() rather then add support for getting the GPIO to the codec driver. This keeps the codec code nice and clean. Note that using an external GPIO for this conflicts with button-press support, so this commit disables button-press support when an external GPIO is used. Acked-by:
-
Hans de Goede authored
Some BYT platforms have a RT5651 codec while using an ACPI node with a HID of 10EC5640 to describe the coded. Add the 10EC5640 HID to the acpi_device_id list, so that the rt5651 will bind to the codec on these devices. Like the rt5645 and rt5670 drivers which also have the 10EC5640 ACPI HID in their acpi_device_id list for similar reasons, the rt5651 driver checks the codecs device-id register so that it will only bind if the codec actually is a rt5651 and it will ignore actual rt5640 codecs. Acked-by:
-
Hans de Goede authored
The Point of View TAB-P1006W-232 (v1.0) tablet uses 10EC5640 as ACPI HID, but it has a rt5651 codec add a quirk for this. Acked-by:
-
Kuninori Morimoto authored
Current BSDSR/BSDISR are using temporary/generic settings, but it can't handle all SRCx/SoC. It needs to handle correctry. Otherwise, sampling rate converted sound channel will be broken if it was TDM. One note is that it needs to overwrite settings on E3 case. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by:
chaoliang qin <chaoliang.qin.jg@renesas.com> Tested-by:
Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by:
-
Alison Wang authored
This patch introduces "sclk-strength" property to allow SCLK pad drive strength to be changed via device tree. When running playback test on LS1028ARDB, Tx Frame sync error interrupt will occur sometimes. Some noises also exist. After changing SCLK pad drive strength to the maximum value, the issues are gone. Signed-off-by:
Alison Wang <alison.wang@nxp.com> Signed-off-by:
-
Maruthi Srinivas Bayyavarapu authored
Added SPDIF driver build related changes. Signed-off-by:
Maruthi Srinivas Bayyavarapu <maruthi.srinivas.bayyavarapu@xilinx.com> Signed-off-by:
-
Maruthi Srinivas Bayyavarapu authored
Added SPDIF audio driver. This provides playback and capture of AES audio over SPDIF interface. Signed-off-by:
-
Maruthi Srinivas Bayyavarapu authored
Added documentation for SPDIF IP DT bindings. Signed-off-by:
-
Cosmin Samoila authored
Add Digital Audio Interface driver that convers PDM bitstream to PCM format. Features: - Fixed filtering characteristics for audio application. - Full or partial set of channels operation with individual enable control. - Programmable PDM clock generator. - Programmable decimation rate. - 16-bit signed output result. - Overall stopband attenuation more than 80dB. - Overall passband ripple less than 0.2dB. Signed-off-by:
Cosmin-Gabriel Samoila <cosmin.samoila@nxp.com> Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by:
-
Cosmin Samoila authored
Document the bindings for MICFIL DAI. Signed-off-by:
-
Daniel Mack authored
Commit f84a6273 ("ASoC: pxa: remove raumfeld machine driver") removed the Raumfeld ASoC machine driver but forgot to kill one line in the Makefile. Signed-off-by:
Daniel Mack <daniel@zonque.org> Signed-off-by:
-
Pierre-Louis Bossart authored
Reported by Coccinelle: sound/soc/codecs/rt298.c:992:6-8: WARNING: Comparison to bool sound/soc/codecs/rt298.c:995:6-9: WARNING: Comparison to bool sound/soc/codecs/rt298.c:317:5-7: WARNING: Comparison to bool sound/soc/codecs/rt298.c:320:5-8: WARNING: Comparison to bool sound/soc/codecs/rt298.c:348:5-7: WARNING: Comparison to bool sound/soc/codecs/rt298.c:351:5-8: WARNING: Comparison to bool Signed-off-by:
-
Bard liao authored
The buf in rl6347a_hw_read is __be32. Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by:
Bard liao <yung-chuan.liao@linux.intel.com> Signed-off-by:
-
Bard liao authored
The eq parameters binary is stored in __be. However, it is unsigned short in rt5645_eq_param_s{} which will cause incorrect type assignment. So add struct rt5645_eq_param_s_be16{} to store the eq binary and convert it to unsigned short in rt5645->eq_param. Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: -
Pierre-Louis Bossart authored
Reported by Sparse: da7219.c:841:57: warning: dubious: x & !y Cc: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by:
Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by:
-
Pierre-Louis Bossart authored
Reported by Sparse. da7219.c:440:44: warning: cast to restricted __le16 da7219.c:461:13: warning: incorrect type in assignment (different base types) da7219.c:461:13: expected unsigned short [unsigned] [usertype] val da7219.c:461:13: got restricted __le16 [usertype] <noident> da7219.c:1451:16: warning: incorrect type in assignment (different base types) da7219.c:1451:16: expected unsigned short [unsigned] [usertype] offset da7219.c:1451:16: got restricted __le16 [usertype] <noident> da7219-aad.c:150:37: warning: incorrect type in assignment (different base types) da7219-aad.c:150:37: expected unsigned short [unsigned] [usertype] tonegen_freq_hptest da7219-aad.c:150:37: got restricted __le16 [usertype] <noident> da7219-aad.c:157:37: warning: incorrect type in assignment (different base types) da7219-aad.c:157:37: expected unsigned short [unsigned] [usertype] tonegen_freq_hptest da7219-aad.c:157:37: got restricted __le16 [usertype] <noident> Cc: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by:
-
Pierre-Louis Bossart authored
Reported by Coccinelle: mt6351.c:1418:5-8: Unneeded variable: "ret". Return "0" on line 1437 Signed-off-by:
-
Pierre-Louis Bossart authored
Reported by Coccinelle: sound/soc/codecs/tscs42xx.c:392:5-31: WARNING: Comparison to bool Signed-off-by:
-
Pierre-Louis Bossart authored
Reported by Coccinelle: nau8824.c:810:6-12: ERROR: Assignment of bool to non-0/1 constant Signed-off-by:
-
Pierre-Louis Bossart authored
Reported by Coccinelle: sound/soc/codecs/rt5651.c:750:2-17: WARNING: Assignment of bool to 0/1 sound/soc/codecs/rt5651.c:754:2-17: WARNING: Assignment of bool to 0/1 sound/soc/codecs/rt5651.c:2192:1-16: WARNING: Assignment of bool to 0/1 Signed-off-by:
-
Pierre-Louis Bossart authored
Reported by Coccinelle: sound/soc/codecs/max98927.c:508:2-20: WARNING: Assignment of bool to 0/1 sound/soc/codecs/max98927.c:889:3-28: WARNING: Assignment of bool to 0/1 sound/soc/codecs/max98927.c:891:3-28: WARNING: Assignment of bool to 0/1 sound/soc/codecs/max98927.c:893:2-27: WARNING: Assignment of bool to 0/1 Signed-off-by:
-
Pierre-Louis Bossart authored
Reported by Coccinelle: sound/soc/codecs/rt5640.c:980:2-17: WARNING: Assignment of bool to 0/1 sound/soc/codecs/rt5640.c:984:2-17: WARNING: Assignment of bool to 0/1 sound/soc/codecs/rt5640.c:2825:1-16: WARNING: Assignment of bool to 0/1 Signed-off-by:
-
Pierre-Louis Bossart authored
Reported by Coccinelle: sound/soc/codecs/rt286.c:927:5-7: WARNING: Comparison to bool sound/soc/codecs/rt286.c:930:5-8: WARNING: Comparison to bool sound/soc/codecs/rt286.c:299:5-7: WARNING: Comparison to bool sound/soc/codecs/rt286.c:302:5-8: WARNING: Comparison to bool Signed-off-by:
-
Pierre-Louis Bossart authored
Reported by Coccinelle: sound/soc/codecs/rt274.c:958:6-8: WARNING: Comparison to bool sound/soc/codecs/rt274.c:961:6-9: WARNING: Comparison to bool sound/soc/codecs/rt274.c:384:5-7: WARNING: Comparison to bool sound/soc/codecs/rt274.c:387:5-8: WARNING: Comparison to bool Signed-off-by:
-
Pierre-Louis Bossart authored
Reported by Coccinelle: sound/soc/codecs/cs4271.c:226:2-16: WARNING: Assignment of bool to 0/1 sound/soc/codecs/cs4271.c:229:2-16: WARNING: Assignment of bool to 0/1 Signed-off-by:
-
Pierre-Louis Bossart authored
Reported by Coccinelle: sound/soc/codecs/max98373.c:411:2-20: WARNING: Assignment of bool to 0/1 sound/soc/codecs/max98373.c:922:2-27: WARNING: Assignment of bool to 0/1 sound/soc/codecs/max98373.c:924:2-27: WARNING: Assignment of bool to 0/1 Signed-off-by:
-
Bard liao authored
Some mux/mixer are not used. Remove them from the driver. Signed-off-by:
-
Bard liao authored
rt5645_if3_adc_in_mux, rt5645_inr_mux, and rt5645_inl_mux are not used. Remove them from the driver. Signed-off-by:
-
Pierre-Louis Bossart authored
Missing or spurious parameter descriptions. Fix warnings with W=1 Signed-off-by:
-
Pierre-Louis Bossart authored
Fix warnings with W=1 If these variables are useful this driver should be modified to expose them. Signed-off-by:
-
Pierre-Louis Bossart authored
Fix warnings with W=1 If these variables are useful then this driver should be modified to expose them. Signed-off-by:
-
Pierre-Louis Bossart authored
No reason why this is global, fix warnings with W=1 Signed-off-by:
-
Daniel Baluta authored
ak4458 driver supports also ak4497 codec. Signed-off-by:
Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by:
-
Daniel Baluta authored
AK4497 is a 32-bit 2ch DAC and has the same register map as AK4458 with few exceptions: * AK4497 has one more register at the end of register space DFS_READ which is a read only register that allows users to read FS Auto Detection mode. We currently do not use this register so we use the same regmap structure as for ak4458. * Because AK4458 is an 8ch DAC there are some fields that are only used by AK4458 and marked as reserved for AK4497, so for this reason we need to have a distinct set of controls, widgets and routes. Datasheet for AK4497 is at: https://www.akm.com/akm/en/file/ev-board-manual/AK4497EQ.pdf Datasheet for AK4458 is at: https://www.akm.com/akm/en/file/datasheet/AK4458VN.pdfSigned-off-by:
-
Mark Brown authored
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull more Kbuild updates from Masahiro Yamada: - improve boolinit.cocci and use_after_iter.cocci semantic patches - fix alignment for kallsyms - move 'asm goto' compiler test to Kconfig and clean up jump_label CONFIG option - generate asm-generic wrappers automatically if arch does not implement mandatory UAPI headers - remove redundant generic-y defines - misc cleanups * tag 'kbuild-v4.21-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: rename generated .*conf-cfg to *conf-cfg kbuild: remove unnecessary stubs for archheader and archscripts kbuild: use assignment instead of define ... endef for filechk_* rules arch: remove redundant UAPI generic-y defines kbuild: generate asm-generic wrappers if mandatory headers are missing arch: remove stale comments "UAPI Header export list" riscv: remove redundant kernel-space generic-y kbuild: change filechk to surround the given command with { } kbuild: remove redundant target cleaning on failure kbuild: clean up rule_dtc_dt_yaml kbuild: remove UIMAGE_IN and UIMAGE_OUT jump_label: move 'asm goto' support test to Kconfig kallsyms: lower alignment on ARM scripts: coccinelle: boolinit: drop warnings on named constants scripts: coccinelle: check for redeclaration kconfig: remove unused "file" field of yylval union nds32: remove redundant kernel-space generic-y nios2: remove unneeded HAS_DMA define
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf tooling updates form Ingo Molnar: "A final batch of perf tooling changes: mostly fixes and small improvements" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits) perf session: Add comment for perf_session__register_idle_thread() perf thread-stack: Fix thread stack processing for the idle task perf thread-stack: Allocate an array of thread stacks perf thread-stack: Factor out thread_stack__init() perf thread-stack: Allow for a thread stack array perf thread-stack: Avoid direct reference to the thread's stack perf thread-stack: Tidy thread_stack__bottom() usage perf thread-stack: Simplify some code in thread_stack__process() tools gpio: Allow overriding CFLAGS tools power turbostat: Override CFLAGS assignments and add LDFLAGS to build command tools thermal tmon: Allow overriding CFLAGS assignments tools power x86_energy_perf_policy: Override CFLAGS assignments and add LDFLAGS to build command perf c2c: Increase the HITM ratio limit for displayed cachelines perf c2c: Change the default coalesce setup perf trace beauty ioctl: Beautify USBDEVFS_ commands perf trace beauty: Export function to get the files for a thread perf trace: Wire up ioctl's USBDEBFS_ cmd table generator perf beauty ioctl: Add generator for USBDEVFS_ ioctl commands tools headers uapi: Grab a copy of usbdevice_fs.h perf trace: Store the major number for a file when storing its pathname ...
-
