- 23 Jan, 2015 13 commits
-
-
Viresh Kumar authored
There is no need of this separate variable, use 'policy' instead. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Viresh Kumar authored
These are messing up more than the benefit they provide. It isn't a lot of code anyway, that we will compile without them. Kill them. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Viresh Kumar authored
We should first check if a cpufreq driver is already registered or not before updating driver_data->flags. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Viresh Kumar authored
There is no point finding out the 'policy' again within __cpufreq_get() when all the callers already have it. Just make them pass policy instead. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Viresh Kumar authored
There is no point finding out the 'policy' again within cpufreq_out_of_sync() when all the callers already have it. Just make them pass policy instead. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Viresh Kumar authored
Either we can be setpolicy or target type, nothing else. And so the else part of setpolicy will automatically be of has_target() type. And so we don't need to check it again. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Viresh Kumar authored
Remove unnecessary from find_governor's name. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Viresh Kumar authored
There are two 'if' blocks here, checking for !cpufreq_driver->setpolicy and has_target(). Both are actually doing the same thing, merge them. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Viresh Kumar authored
No need of an unnecessary line break. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Viresh Kumar authored
We can live without it and so we should. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Viresh Kumar authored
It doesn't make any sense at all and is a leftover of some earlier commit. Remove it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Doug Anderson authored
We should stop cpufreq governors when we shut down the system. If we don't do this, we can end up with this deadlock: 1. cpufreq governor may be running on a CPU other than CPU0. 2. In machine_restart() we call smp_send_stop() which stops CPUs. If one of these CPUs was actively running a cpufreq governor then it may have the mutex / spinlock needed to access the main PMIC in the system (perhaps over I2C) 3. If a machine needs access to the main PMIC in order to shutdown then it will never get it since the mutex was lost when the other CPU stopped. 4. We'll hang (possibly eventually hitting the hard lockup detector). Let's avoid the problem by stopping the cpufreq governor at shutdown, which is a sensible thing to do anyway. Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Wolfram Sang authored
This platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 18 Jan, 2015 4 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "We've been sitting on our fixes branch for a while, so this batch is unfortunately on the large side. A lot of these are tweaks and fixes to device trees, fixing various bugs around clocks, reg ranges, etc. There's also a few defconfig updates (which are on the late side, no more of those). All in all the diffstat is bigger than ideal at this time, but nothing in here seems particularly risky" * tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits) reset: sunxi: fix spinlock initialization ARM: dts: disable CCI on exynos5420 based arndale-octa drivers: bus: check cci device tree node status ARM: rockchip: disable jtag/sdmmc autoswitching on rk3288 ARM: nomadik: fix up leftover device tree pins ARM: at91: board-dt-sama5: add phy_fixup to override NAND_Tree ARM: at91/dt: sam9263: Add missing clocks to lcdc node ARM: at91: sama5d3: dt: correct the sound route ARM: at91/dt: sama5d4: fix the timer reg length ARM: exynos_defconfig: Enable LM90 driver ARM: exynos_defconfig: Enable options for display panel support arm: dts: Use pmu_system_controller phandle for dp phy ARM: shmobile: sh73a0 legacy: Set .control_parent for all irqpin instances ARM: dts: berlin: correct BG2Q's SM GPIO location. ARM: dts: berlin: add broken-cd and set bus width for eMMC in Marvell DMP DT ARM: dts: berlin: fix io clk and add missing core clk for BG2Q sdhci2 host ARM: dts: Revert disabling of smc91x for n900 ARM: dts: imx51-babbage: Fix ULPI PHY reset modelling ARM: dts: dra7-evm: fix qspi device tree partition size ARM: omap2plus_defconfig: use CONFIG_CPUFREQ_DT ...
-
git://git.linaro.org/people/mike.turquette/linuxLinus Torvalds authored
Pull clock driver fixes from Mike Turquette: "Small number of fixes for clock drivers and a single null pointer dereference fix in the framework core code. The driver fixes vary from fixing section mismatch warnings to preventing machines from hanging (and preventing developers from crying)" * tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux: clk: fix possible null pointer dereference Revert "clk: ppc-corenet: Fix Section mismatch warning" clk: rockchip: fix deadlock possibility in cpuclk clk: berlin: bg2q: remove non-exist "smemc" gate clock clk: at91: keep slow clk enabled to prevent system hang clk: rockchip: fix rk3288 cpuclk core dividers clk: rockchip: fix rk3066 pll lock bit location clk: rockchip: Fix clock gate for rk3188 hclk_emem_peri clk: rockchip: add CLK_IGNORE_UNUSED flag to fix rk3066/rk3188 USB Host
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is one fix for a Multiqueue sleeping in invalid context problem and a MAINTAINER file update for Qlogic" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ->queue_rq can't sleep MAINTAINERS: Update maintainer list for qla4xxx
-
- 17 Jan, 2015 18 commits
-
-
Stanimir Varbanov authored
The commit 646cafc6 (clk: Change clk_ops->determine_rate to return a clk_hw as the best parent) opens a possibility for null pointer dereference, fix this. Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@linaro.org>
-
Kevin Hao authored
This reverts commit da788acb. That commit tried to fix the section mismatch warning by moving the ppc_corenet_clk_driver struct to init section. This is definitely wrong because the kernel would free the memories occupied by this struct after boot while this driver is still registered in the driver core. The kernel would panic when accessing this driver struct. Cc: stable@vger.kernel.org # 3.17 Signed-off-by: Kevin Hao <haokexin@gmail.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
-
Heiko Stübner authored
Lockdep reported a possible deadlock between the cpuclk lock and for example the i2c driver. CPU0 CPU1 ---- ---- lock(clk_lock); local_irq_disable(); lock(&(&i2c->lock)->rlock); lock(clk_lock); <Interrupt> lock(&(&i2c->lock)->rlock); *** DEADLOCK *** The generic clock-types of the core ccf already use spin_lock_irqsave when touching clock registers, so do the same for the cpuclk. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Michael Turquette <mturquette@linaro.org> [mturquette@linaro.org: removed initialization of "flags"]
-
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull dmaengine fixes from Vinod Koul: "Two patches, the first by Andy to fix dw dmac runtime pm and second one by me to fix the dmaengine headers in MAINTAINERS" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: dw: balance PM runtime calls MAINTAINERS: dmaengine: fix the header file for dmaengine
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Mostly tooling fixes, but also two PMU driver fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools powerpc: Use dwfl_report_elf() instead of offline. perf tools: Fix segfault for symbol annotation on TUI perf test: Fix dwarf unwind using libunwind. perf tools: Avoid build splat for syscall numbers with uclibc perf tools: Elide strlcpy warning with uclibc perf tools: Fix statfs.f_type data type mismatch build error with uclibc tools: Remove bitops/hweight usage of bits in tools/perf perf machine: Fix __machine__findnew_thread() error path perf tools: Fix building error in x86_64 when dwarf unwind is on perf probe: Propagate error code when write(2) failed perf/x86/intel: Fix bug for "cycles:p" and "cycles:pp" on SLM perf/rapl: Fix sysfs_show() initialization for RAPL PMU
-
Ingo Molnar authored
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: - Fix segfault when using both the map symtab viewer and annotation in the TUI (Namhyung Kim). - uClibc build fixes (Alexey Brodkin, Vineet Gupta). - bitops/hweight were moved from tools/perf/ too tools/include, move some leftovers (Arnaldo Carvalho de Melo) - Fix dwarf unwind x86_64 build error (Namhyung Kim) - Fix __machine__findnew_thread() error path (Namhyung Kim) - Propagate error code when write(2) failed in 'perf probe' (Namhyung Kim) - Use dwfl_report_elf() instead of offline in powerpc bits to properly handle non prelinked DSOs (Sukadev Bhattiprolu). - Fix dwarf unwind using libunwind in 'perf test' (Wang Nan) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
Olof Johansson authored
Merge tag 'samsung-fixes-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Merge "Samsung fixes for v3.19" from Kukjin Kim: Samsung fixes for v3.19 - exynos_defconfig: enable LM90 driver and display panel support - HWMON - SENSORS_LM90 - Direct Rendering Manager (DRM) - DRM bridge registration and lookup framework - Parade ps8622/ps8625 eDP/LVDS bridge - NXP ptn3460 eDP/LVDS bridge - Exynos Fully Interactive Mobile Display controller (FIMD) - Panel registration and lookup framework - Simple panels - Backlight & LCD device support - use pmu_system_controller phandle for dp phy : DP PHY requires pmu_system_controller to handle PMU reg. now * tag 'samsung-fixes-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: exynos_defconfig: Enable LM90 driver ARM: exynos_defconfig: Enable options for display panel support arm: dts: Use pmu_system_controller phandle for dp phy Signed-off-by: Olof Johansson <olof@lixom.net>
-
Tyler Baker authored
Call spin_lock_init() before the spinlocks are used, both in early init and probe functions preventing a lockdep splat. I have been observing lockdep complaining [1] during boot on my a80 optimus [2] when CONFIG_PROVE_LOCKING has been enabled. This patch resolves the splat, and has been tested on a few other sunxi platforms without issue. [1] http://storage.kernelci.org/next/next-20150107/arm-multi_v7_defconfig+CONFIG_PROVE_LOCKING=y/lab-tbaker/boot-sun9i-a80-optimus.html [2] http://kernelci.org/boot/?a80-optimusSigned-off-by: Tyler Baker <tyler.baker@linaro.org> Cc: <stable@vger.kernel.org> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'renesas-soc-fixes-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Merge "Renesas ARM Based SoC Fixes for v3.19" from Simon Horman: Renesas ARM Based SoC Fixes for v3.19 This pull request is based on the last round of SoC updates for v3.19, Fourth Round of Renesas ARM Based SoC Updates for v3.19, tagged as renesas-soc3-for-v3.19, merged into your next/soc branch and included in v3.19-rc1. - ARM: shmobile: r8a7740: Instantiate GIC from C board code in legacy builds Set .control_parent for all irqpin instances for sh73a0 SoC when booting using legacy C. - ARM: shmobile: r8a7740: Instantiate GIC from C board code in legacy builds This fixes a long standing problem which has been present since the sh73a0 SoC started using the INTC External IRQ pin driver. The patch that introduced the problem is 341eb546 ("ARM: shmobile: INTC External IRQ pin driver on sh73a0") which was included in v3.10. * tag 'renesas-soc-fixes-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: sh73a0 legacy: Set .control_parent for all irqpin instances ARM: shmobile: r8a7740: Instantiate GIC from C board code in legacy builds
-
Abhilash Kesavan authored
The arndale-octa board was giving "imprecise external aborts" during boot-up with MCPM enabled. CCI enablement of the boot cluster was found to be the cause of these aborts (possibly because the secure f/w was not allowing it). Hence, disable CCI for the arndale-octa board. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Kevin Hilman <khilman@linaro.org> Tested-by: Tyler Baker <tyler.baker@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Abhilash Kesavan authored
The arm-cci driver completes the probe sequence even if the cci node is marked as disabled. Add a check in the driver to honour the cci status in the device tree. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into fixes Merge "at91: fixes for 3.19 #1 (ter)" from Nicolas Ferre: First fixes batch for AT91 on 3.19: - fix some DT entries - correct clock entry for the at91sam9263 LCD - add a phy_fixup for Eth1 on sama5d4 * tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: at91: board-dt-sama5: add phy_fixup to override NAND_Tree ARM: at91/dt: sam9263: Add missing clocks to lcdc node ARM: at91: sama5d3: dt: correct the sound route ARM: at91/dt: sama5d4: fix the timer reg length Signed-off-by: Olof Johansson <olof@lixom.net>
-
Heiko Stübner authored
rk3288 SoCs have a function to automatically switch between jtag/sdmmc pinmux settings depending on the card state. This collides with a lot of assumptions. It only works when using the internal card-detect mechanism and breaks horribly when using either the normal card-detect via the slot-gpio function or via any other pin. Also there is of course no link between the mmc and jtag on the software-side, so the jtag clocks may very well be disabled when the card is ejected and the soc switches back to the jtag pinmux. Leaving the switching function enabled did result in mmc timeouts and rcu stalls thus hanging the system on 3.19-rc1. Therefore disable it in all cases, as we expect the devicetree to explicitly select either mmc or jtag pinmuxes anyway. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'berlin-fixes-for-3.19-1' of git://git.infradead.org/users/hesselba/linux-berlin into fixes Merge "ARM: berlin: Fixes for v3.19 (round 1)" from Sebastian Hesselbarth: Marvell Berlin fixes for v3.19 round 1: - SDHCI DT fixes for BG2Q and BG2Q reference board - BG2Q SM GPIO DT node relocation * tag 'berlin-fixes-for-3.19-1' of git://git.infradead.org/users/hesselba/linux-berlin: ARM: dts: berlin: correct BG2Q's SM GPIO location. ARM: dts: berlin: add broken-cd and set bus width for eMMC in Marvell DMP DT ARM: dts: berlin: fix io clk and add missing core clk for BG2Q sdhci2 host Signed-off-by: Olof Johansson <olof@lixom.net>
-
Linus Walleij authored
We altered the device tree bindings for the Nomadik family of pin controllers to be standard, this file was merged out-of-order so we missed fixing this. Fix it up. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'omap-for-v3.19/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Merge "omap fixes against v3.19-rc1" from Tony Lindgren: Fixes for omaps mostly to deal with dra7 timer issues and hypervisor mode. The other fixes are minor fixes for various boards. The summary of the fixes is: - Fix real-time counter rate typos for some frequencies - Fix counter frequency drift for am572x - Fix booting of secondary CPU in HYP mode - Fix n900 board name for legacy user space - Fix cpufreq in omap2plus_defconfig after Kconfig change - Fix dra7 qspi partitions And also, let's re-enable smc91x on some n900 boards that we have sitting in a few test boot systems after the boot loader dependencies got fixed. * tag 'omap-for-v3.19/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Revert disabling of smc91x for n900 ARM: dts: dra7-evm: fix qspi device tree partition size ARM: omap2plus_defconfig: use CONFIG_CPUFREQ_DT ARM: OMAP2+: Fix n900 board name for legacy user space ARM: omap5/dra7xx: Enable booting secondary CPU in HYP mode ARM: dra7xx: Fix counter frequency drift for AM572x errata i856 ARM: omap5/dra7xx: Fix frequency typos Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'imx-fixes-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Merge "ARM: imx: fixes for 3.19" from Shawn Guo: The i.MX fixes for 3.19: - One fix for incorrect i.MX25 SPI1 clock assignment in device tree, which causes system hang when accessing SPI1. - Correct i.MX6SX QSPI parent clock configuration to fix a kernel Oops. - Fix ULPI PHY reset modelling on imx51-babbage board to remove the dependency on bootloader for USB3317 ULPI PHY reset. - Correct video divider setting on i.MX6Q rev T0 1.0 to fix the issue that HDMI is not working at high resolution on T0 1.0. - One incremental fix for CODA960 VPU enabling in device tree to correct interrupt order. - LS1021A SCFG block works in BE mode, add device tree property big-endian to make it right. * tag 'imx-fixes-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx51-babbage: Fix ULPI PHY reset modelling ARM: imx6sx: Set PLL2 as parent of QSPI clocks ARM: dts: imx25: Fix the SPI1 clocks ARM: clk-imx6q: fix video divider for rev T0 1.0 ARM: dts: imx6qdl: Fix CODA960 interrupt order ARM: ls1021a: dtsi: add 'big-endian' property for scfg node Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'v3.19-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes Merge "ARM: rockchip: dts fix for 3.19" from Heiko Stübner: Increase drive-strength to sdmmc pins on rk3288-evb to fix an issue with the fixed highspeed card detection. * tag 'v3.19-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: bump sd card pin drive strength up on rk3288-evb Signed-off-by: Olof Johansson <olof@lixom.net>
-
- 16 Jan, 2015 5 commits
-
-
Louis Langholtz authored
Avoid overflow possibility. [ The overflow is purely theoretical, since this is used for memory ranges that aren't even close to using the full 64 bits, but this is the right thing to do regardless. - Linus ] Signed-off-by: Louis Langholtz <lou_langholtz@me.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Peter Anvin <hpa@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Sukadev Bhattiprolu authored
dwfl_report_offline() works only when libraries are prelinked. Replace dwfl_report_offline() with dwfl_report_elf() so we correctly extract debug info even from libraries that are not prelinked. Reported-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Tested-by: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Link: http://lkml.kernel.org/r/20150114221045.GA17703@us.ibm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Namhyung Kim authored
Currently the symbol structure is allocated with symbol_conf.priv_size to carry sideband information like annotation, map browser on TUI and sort-by-name tree node. So retrieving these information from symbol needs to care about the details of such placement. However the annotation code just assumes that the symbol is placed after the struct annotation. But actually there's other info between them. So accessing those struct will lead to an undefined behavior (usually a crash) after they write their info to the same location. To reproduce the problem, please follow the steps below: 1. run perf report (TUI of course) with -v option 2. open map browser (by pressing right arrow key for any entry) 3. search any function (by pressing '/' key and input whatever..) 4. return to the hist browser (by pressing 'q' or left arrow key) 5. open annotation window for the same entry (by pressing 'a' key) Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1421234288-22758-1-git-send-email-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Wang Nan authored
Perf tool fails to unwind user stack if the event raises in a shared object. This patch improves tests/dwarf-unwind.c to demonstrate the problem by utilizing commonly used glibc function "bsearch". If perf is not statically linked, the testcase will try to unwind a mixed call trace. By debugging libunwind I found that there is a bug in unwind-libunwind: it always passes 0 as segbase to libunwind, cause libunwind unable to locate debug_frame entry fir first level ip address (I add some more debugging output into libunwind to make things clear): >_Uarm_dwarf_find_debug_frame: start_ip = 10be98, end_ip = 10c2a4 >_Uarm_dwarf_find_debug_frame: found debug_frame table `/lib/libc-2.18.so': segbase=0x0, len=7, gp=0x0, table_data=0x449388 >_Uarm_dwarf_search_unwind_table: call lookup:ip = b6cd3bcc, segbase = 0, rel_ip = b6cd3bcc >lookup: e->start_ip_offset = bcf18 (rel_ip = b6cd3bcc) >lookup: e->start_ip_offset = 6d314 (rel_ip = b6cd3bcc) >lookup: e->start_ip_offset = 33d0c (rel_ip = b6cd3bcc) ... >lookup: e->start_ip_offset = 15d0c (rel_ip = b6cd3bcc) >lookup: e->start_ip_offset = 15c40 (rel_ip = b6cd3bcc) >_Uarm_dwarf_search_unwind_table: IP b6cd3bcc inside range b6c12000-b6d4c000, but no explicit unwind info found >put_rs_cache: unmasking signals/interrupts and releasing lock >_Uarm_dwarf_step: returning -10 >_Uarm_step: dwarf_step()=-10 This patch passes map->start as segbase to dwarf_find_debug_frame(), so di will be initialized correctly. In addition, dso and executable are different when setting segbase. This patch first check whether the elf is executable, and pass segbase only for shared object. Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1421203007-75799-1-git-send-email-wangnan0@huawei.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Vineet Gupta authored
This is due to duplicated unistd inclusion (via uClibc headers + kernel headers) Also seen on ARM uClibc based tools ------- ARC build ---------->8------------- CC util/evlist.o In file included from ~/arc/k.org/arch/arc/include/uapi/asm/unistd.h:25:0, from util/../perf-sys.h:10, from util/../perf.h:15, from util/event.h:7, from util/event.c:3: ~/arc/k.org/include/uapi/asm-generic/unistd.h:906:0: warning: "__NR_fcntl64" redefined [enabled by default] #define __NR_fcntl64 __NR3264_fcntl ^ In file included from ~/arc/gnu/INSTALL_1412-arc-2014.12-rc1/arc-snps-linux-uclibc/sysroot/usr/include/sys/syscall.h:24:0, from util/../perf-sys.h:6, ----------------->8------------------- ------- ARM build ---------->8------------- CC FPIC plugin_scsi.o In file included from util/../perf-sys.h:9:0, from util/../perf.h:15, from util/cache.h:7, from perf.c:12: ~/arc/k.org/arch/arm/include/uapi/asm/unistd.h:28:0: warning: "__NR_restart_syscall" redefined [enabled by default] In file included from ~/buildroot/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/include/sys/syscall.h:25:0, from util/../perf-sys.h:6, from util/../perf.h:15, from util/cache.h:7, from perf.c:12: ~/buildroot/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/include/bits/sysnum.h:17:0: note: this is the location of the previous definition ----------------->8------------------- Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1421156604-30603-4-git-send-email-vgupta@synopsys.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-