- 27 Jul, 2022 10 commits
-
-
Pali Rohár authored
Creating or filling pci-OF-bus-map property in the device-tree is deprecated since May 2006 [1] and was used only in old platforms like PowerMac. Currently kernel code handles it only for chrp and powermac code. So completely disable filling pci-OF-bus-map property for non-chrp and non-powermac platforms. [1] - https://lore.kernel.org/linuxppc-dev/1148016268.13249.14.camel@localhost.localdomain/Signed-off-by:
Pali Rohár <pali@kernel.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220706104308.5390-5-pali@kernel.org
-
Pali Rohár authored
Function pci_create_OF_bus_map() is used only in chrp code. So hide it from all other platforms. Signed-off-by:
-
Pali Rohár authored
Function pcibios_make_OF_bus_map() is used only in pci_32.c. So make it static. Signed-off-by:
-
Pali Rohár authored
Function pci_device_from_OF_node() is used only in powermac code. So hide it from all other platforms. Signed-off-by:
-
Pali Rohár authored
CPLD firmware can reset board by writing value 0x01 at CPLD memory offset 0x0d. Define syscon-reboot node for this reset support. Fixes: 54c15ec3 ("powerpc: dts: Add DTS file for CZ.NIC Turris 1.x routers") Signed-off-by:
-
Pali Rohár authored
By default old pre-3.0 Freescale PCIe controllers reports invalid PCI Class Code 0x0b20 for PCIe Root Port. It can be seen by lspci -b output on P2020 board which has this pre-3.0 controller: $ lspci -bvnn 00:00.0 Power PC [0b20]: Freescale Semiconductor Inc P2020E [1957:0070] (rev 21) !!! Invalid class 0b20 for header type 01 Capabilities: [4c] Express Root Port (Slot-), MSI 00 Fix this issue by programming correct PCI Class Code 0x0604 for PCIe Root Port to the Freescale specific PCIe register 0x474. With this change lspci -b output is: $ lspci -bvnn 00:00.0 PCI bridge [0604]: Freescale Semiconductor Inc P2020E [1957:0070] (rev 21) (prog-if 00 [Normal decode]) Capabilities: [4c] Express Root Port (Slot-), MSI 00 Without any "Invalid class" error. So class code was properly reflected into standard (read-only) PCI register 0x08. Same fix is already implemented in U-Boot pcie_fsl.c driver in commit: http://source.denx.de/u-boot/u-boot/-/commit/d18d06ac35229345a0af80977a408cfbe1d1015b Fix activated by U-Boot stay active also after booting Linux kernel. But boards which use older U-Boot version without that fix are affected and still require this fix. So implement this class code fix also in kernel fsl_pci.c driver. Cc: stable@vger.kernel.org Signed-off-by: -
Masahiro Yamada authored
The .incbin assembler directive is much faster than bin2c + $(CC). Do similar refactoring as in commit 4c0f032d ("s390/purgatory: Omit use of bin2c"). Please note the .quad directive matches to size_t in C (both 8 byte) because the purgatory is compiled only for the 64-bit kernel. (KEXEC_FILE depends on PPC64). Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Reviewed-by:
Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by:
-
Laurent Dufour authored
During an LPM, while the memory transfer is in progress on the arrival side, some latencies are generated when accessing not yet transferred pages on the arrival side. Thus, the NMI watchdog may be triggered too frequently, which increases the risk to hit an NMI interrupt in a bad place in the kernel, leading to a kernel panic. Disabling the Hard Lockup Watchdog until the memory transfer could be a too strong work around, some users would want this timeout to be eventually triggered if the system is hanging even during an LPM. Introduce a new sysctl variable nmi_watchdog_factor. It allows to apply a factor to the NMI watchdog timeout during an LPM. Just before the CPUs are stopped for the switchover sequence, the NMI watchdog timer is set to watchdog_thresh + factor% A value of 0 has no effect. The default value is 200, meaning that the NMI watchdog is set to 30s during LPM (based on a 10s watchdog_thresh value). Once the memory transfer is achieved, the factor is reset to 0. Setting this value to a high number is like disabling the NMI watchdog during an LPM. Signed-off-by:
Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Laurent Dufour authored
Introduce a factor which would apply to the NMI watchdog timeout. This factor is a percentage added to the watchdog_tresh value. The value is set under the watchdog_mutex protection and lockup_detector_reconfigure() is called to recompute wd_panic_timeout_tb. Once the factor is set, it remains until it is set back to 0, which means no impact. Signed-off-by:
-
Laurent Dufour authored
In some circumstances it may be interesting to reconfigure the watchdog from inside the kernel. On PowerPC, this may helpful before and after a LPAR migration (LPM) is initiated, because it implies some latencies, watchdog, and especially NMI watchdog is expected to be triggered during this operation. Reconfiguring the watchdog with a factor, would prevent it to happen too frequently during LPM. Rename lockup_detector_reconfigure() as __lockup_detector_reconfigure() and create a new function lockup_detector_reconfigure() calling __lockup_detector_reconfigure() under the protection of watchdog_mutex. Signed-off-by:
-
- 25 Jul, 2022 16 commits
-
-
Laurent Dufour authored
In pseries_migration_partition(), loop until the memory transfer is complete. This way the calling drmgr process will not exit earlier, allowing callbacks to be run only once the migration is fully completed. If reading the VASI state is done after the hypervisor has completed the migration, the HCALL is returning H_PARAMETER. We can safely assume that the memory transfer is achieved if this happens. This will also allow to manage the NMI watchdog state in the next commits. Signed-off-by:
Nathan Lynch <nathanl@linux.ibm.com> Reviewed-by:
-
Michael Ellerman authored
Currently the ptrace-gpr test only tests the GET/SET(FP)REGS ptrace APIs. But there's an alternate (older) API, called PEEK/POKEUSR. Add some minimal testing of PEEK/POKEUSR of the FPRs. This is sufficient to detect the bug that was fixed recently in the 32-bit ptrace FPR handling. Depends-on: 8e127844 ("powerpc/32: Fix overread/overwrite of thread_struct via ptrace") Signed-off-by:
-
Michael Ellerman authored
The ptrace-gpr test uses fixed values to test that registers can be read/written via ptrace. In particular it sets all GPRs to 1, which means the test could miss some types of bugs - eg. if the kernel was only returning the low word. So generate some random values at startup and use those instead. Signed-off-by:
-
Michael Ellerman authored
Use the FAIL_IF() macro so that errors in the child report a line number, rather than just silently exiting. Signed-off-by:
-
Michael Ellerman authored
The ptrace-gpr test includes some inline asm to load GPR and FPR registers. It then goes back to C to wait for the parent to trace it and then checks register contents. The split between inline asm and C is fragile, it relies on the compiler not using any non-volatile GPRs after the inline asm block. It also requires a very large and unwieldy inline asm block. So convert the logic to set registers, wait, and store registers to a single asm function, meaning there's no window for the compiler to intervene. Signed-off-by:
-
Michael Ellerman authored
The ptrace-gpr test can now be built 32-bit, so do that if that's the compiler default rather than forcing a 64-bit build. Signed-off-by:
-
Michael Ellerman authored
Some of the ptrace tests check the contents of floating pointer registers. Currently these use float, which is always 4 bytes, but the ptrace API supports saving/restoring 8 bytes per register, so switch to using doubles to exercise the code more fully. Signed-off-by:
-
Michael Ellerman authored
This function is never called, drop it. Signed-off-by:
-
Michael Ellerman authored
Add support for 32-bit builds to the asm helpers. Signed-off-by:
-
Michael Ellerman authored
Thare are some asm helpers for creating/popping stack frames in basic_asm.h. They always save/restore r2 (TOC pointer), but none of the selftests change r2, so it's unnecessary to save it by default. Signed-off-by:
-
Michael Ellerman authored
Thare are some asm helpers for creating/popping stack frames in basic_asm.h. They always save/restore CR, but none of the selftests tests touch non-volatile CR fields, so it's unnecessary to save them by default. Signed-off-by:
-
Michael Ellerman authored
Currently all ptrace tests are built 64-bit and with TM enabled. Only the TM tests need TM enabled, so split those out into a separate variable so that can be specified precisely. Split the rest of the tests into a variable, and add -m64 to CFLAGS for those tests, so that in a subsequent patch some tests can be made to build 32-bit. Signed-off-by:
-
Michael Ellerman authored
Set LOCAL_HDRS so header changes cause rebuilds. The lib.mk logic adds all the headers in LOCAL_HDRS as dependencies, so there's no need to also list them explicitly. Signed-off-by:
-
Michael Ellerman authored
The PUSH/POP_BASIC_STACK helpers in basic_asm.h do not ensure that the stack pointer is always 16-byte aligned, which is required per the ABI. Fix the macros to do the alignment if the caller fails to. Currently only one caller passes a non-aligned size, tm_signal_self(), which hasn't been caught in testing, presumably because it's a leaf function. Signed-off-by:
-
Michael Ellerman authored
Since commit 87c78b61 ("powerpc: Fix all occurences of "the the"") fixed "the the", there's now a steady stream of patches fixing other duplicate words. Just fix them all at once, to save the overhead of dealing with individual patches for each case. This leaves a few cases of "that that", which in some contexts is correct. Signed-off-by:
-
Michael Ellerman authored
Bring in a build fix for GCC12 from our fixes branch.
-
- 20 Jul, 2022 6 commits
-
-
Ning Qiang authored
In do_adb_query() function of drivers/macintosh/adb.c, req->data is copied form userland. The parameter "req->data[2]" is missing check, the array size of adb_handler[] is 16, so adb_handler[req->data[2]].original_address and adb_handler[req->data[2]].handler_id will lead to oob read. Cc: stable <stable@kernel.org> Signed-off-by:
Ning Qiang <sohu0106@126.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Scott Cheloha authored
PAPR v2.12 defines a new hypercall, H_WATCHDOG. The hypercall permits guest control of one or more virtual watchdog timers. The timers have millisecond granularity. The guest is terminated when a timer expires. This patch adds a watchdog driver for these timers, "pseries-wdt". pseries_wdt_probe() currently assumes the existence of only one platform device and always assigns it watchdogNumber 1. If we ever expose more than one timer to userspace we will need to devise a way to assign a distinct watchdogNumber to each platform device at device registration time. Signed-off-by:
Scott Cheloha <cheloha@linux.ibm.com> Acked-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Scott Cheloha authored
PAPR v2.12 defines a new hypercall, H_WATCHDOG. The hypercall permits guest control of one or more virtual watchdog timers. These timers do not conform to PowerPC device conventions. They are not affixed to any extant bus, nor do they have full representation in the device tree. As a workaround we represent them as platform devices. This patch registers a single platform device, "pseries-wdt", with the platform bus if the FW_FEATURE_WATCHDOG flag is set. A driver for this device, "pseries-wdt", will be introduced in a subsequent patch. Signed-off-by:
-
Scott Cheloha authored
PAPR v2.12 specifies a new optional function set, "hcall-watchdog", for the /rtas/ibm,hypertas-functions property. The presence of this function set indicates support for the H_WATCHDOG hypercall. Check for this function set and, if present, set the new FW_FEATURE_WATCHDOG flag. Signed-off-by:
-
Scott Cheloha authored
PAPR v2.12 defines a new hypercall, H_WATCHDOG. The hypercall permits guest control of one or more virtual watchdog timers. Add the opcode for the H_WATCHDOG hypercall to hvcall.h. While here, add a definition for H_NOOP, a possible return code for H_WATCHDOG. Signed-off-by:
-
Michael Ellerman authored
With GCC 12 allmodconfig prom_init fails to build: Error: External symbol 'memset' referenced from prom_init.c make[2]: *** [arch/powerpc/kernel/Makefile:204: arch/powerpc/kernel/prom_init_check] Error 1 The allmodconfig build enables KASAN, so all calls to memset in prom_init should be converted to __memset by the #ifdefs in asm/string.h, because prom_init must use the non-KASAN instrumented versions. The build failure happens because there's a call to memset that hasn't been caught by the pre-processor and converted to __memset. Typically that's because it's a memset generated by the compiler itself, and that is the case here. With GCC 12, allmodconfig enables CONFIG_INIT_STACK_ALL_PATTERN, which causes the compiler to emit memset calls to initialise on-stack variables with a pattern. Because prom_init is non-user-facing boot-time only code, as a workaround just disable stack variable initialisation to unbreak the build. Reported-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
- 18 Jul, 2022 4 commits
-
-
Uwe Kleine-König authored
Returning an error code (here -EBUSY) from a remove callback doesn't prevent the driver from being unloaded. The only effect is that an error message is emitted and the driver is removed anyhow. So instead drop the remove function (which is equivalent to returning zero) and set the suppress_bind_attrs property to make it impossible to unload the driver via sysfs. This is a preparation for making platform remove callbacks return void. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by:
-
Athira Rajeev authored
Details is added about "caps" attribute group in the ABI documentation. This is used to expose some of the PMU attributes in "caps" directory under : /sys/bus/event_source/devices/<dev>/. The dev/caps will contain information about features that platform specific PMU supports. Signed-off-by:
Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by:
-
Athira Rajeev authored
Add caps support under "/sys/bus/event_source/devices/<pmu>/" for powerpc. This directory can be used to expose some of the specific features that powerpc PMU supports to the user. Example: pmu_name. The name of PMU registered will depend on platform, say power9 or power10 or it could be Generic Compat PMU. Currently the only way to know which is the registered PMU is from the dmesg logs. But clearing the dmesg will make it difficult to know exact PMU backend used. And even extracting from dmesg will be complicated, as we need to parse the dmesg logs and add filters for pmu name. Whereas by exposing it via caps will make it easy as we just need to directly read it from the sysfs. Add a caps directory to /sys/bus/event_source/devices/cpu/ for power8, power9, power10 and generic compat PMU in respective PMU driver code. Update the pmu_name file under caps folder in core-book3s using "attr_update". The information exposed currently: - pmu_name : Underlying PMU name from the driver Example result with power9 pmu: # ls /sys/bus/event_source/devices/cpu/caps pmu_name # cat /sys/bus/event_source/devices/cpu/caps/pmu_name POWER9 Signed-off-by:
-
Joel Stanley authored
When booting on a machine that uses the compat pmu driver we see this: [ 0.071192] GENERIC_COMPAT performance monitor hardware support registered Which is a bit shouty. Give it a nicer name. Signed-off-by:
Joel Stanley <joel@jms.id.au> Reviewed-by:
-
- 09 Jul, 2022 2 commits
-
-
Michael Ellerman authored
Merge KVM related commits we are keeping in a topic branch in case of any conflicts with generic KVM changes.
-
Michael Ellerman authored
Merge our fixes branch. In particular this brings in commit 98648161 ("powerpc/book3e: Fix PUD allocation size in map_kernel_page()") which fixes a build failure in next, because commit 2db2008e ("powerpc/64e: Rewrite p4d_populate() as a static inline function") depends on it.
-
- 04 Jul, 2022 1 commit
-
-
Jason A. Donenfeld authored
The platform device for the rng must be created much later in boot. Otherwise it tries to connect to a parent that doesn't yet exist, resulting in this splat: [ 0.000478] kobject: '(null)' ((____ptrval____)): is not initialized, yet kobject_get() is being called. [ 0.002925] [c000000002a0fb30] [c00000000073b0bc] kobject_get+0x8c/0x100 (unreliable) [ 0.003071] [c000000002a0fba0] [c00000000087e464] device_add+0xf4/0xb00 [ 0.003194] [c000000002a0fc80] [c000000000a7f6e4] of_device_add+0x64/0x80 [ 0.003321] [c000000002a0fcb0] [c000000000a800d0] of_platform_device_create_pdata+0xd0/0x1b0 [ 0.003476] [c000000002a0fd00] [c00000000201fa44] pnv_get_random_long_early+0x240/0x2e4 [ 0.003623] [c000000002a0fe20] [c000000002060c38] random_init+0xc0/0x214 This patch fixes the issue by doing the platform device creation inside of machine_subsys_initcall. Fixes: f3eac426 ("powerpc/powernv: wire up rng during setup_arch") Cc: stable@vger.kernel.org Reported-by:
Sachin Sant <sachinp@linux.ibm.com> Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Tested-by:
-
- 29 Jun, 2022 1 commit
-
-
Aneesh Kumar K.V authored
With commit ffa0b64e ("powerpc: Fix virt_addr_valid() for 64-bit Book3E & 32-bit") the kernel now validate the addr against high_memory value. This results in the below BUG_ON with dax pfns. [ 635.798741][T26531] kernel BUG at mm/page_alloc.c:5521! 1:mon> e cpu 0x1: Vector: 700 (Program Check) at [c000000007287630] pc: c00000000055ed48: free_pages.part.0+0x48/0x110 lr: c00000000053ca70: tlb_finish_mmu+0x80/0xd0 sp: c0000000072878d0 msr: 800000000282b033 current = 0xc00000000afabe00 paca = 0xc00000037ffff300 irqmask: 0x03 irq_happened: 0x05 pid = 26531, comm = 50-landscape-sy kernel BUG at :5521! Linux version 5.19.0-rc3-14659-g4ec05be7c2e1 (kvaneesh@ltc-boston8) (gcc (Ubuntu 9.4.0-1ubuntu1~20.04.1) 9.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #625 SMP Thu Jun 23 00:35:43 CDT 2022 1:mon> t [link register ] c00000000053ca70 tlb_finish_mmu+0x80/0xd0 [c0000000072878d0] c00000000053ca54 tlb_finish_mmu+0x64/0xd0 (unreliable) [c000000007287900] c000000000539424 exit_mmap+0xe4/0x2a0 [c0000000072879e0] c00000000019fc1c mmput+0xcc/0x210 [c000000007287a20] c000000000629230 begin_new_exec+0x5e0/0xf40 [c000000007287ae0] c00000000070b3cc load_elf_binary+0x3ac/0x1e00 [c000000007287c10] c000000000627af0 bprm_execve+0x3b0/0xaf0 [c000000007287cd0] c000000000628414 do_execveat_common.isra.0+0x1e4/0x310 [c000000007287d80] c00000000062858c sys_execve+0x4c/0x60 [c000000007287db0] c00000000002c1b0 system_call_exception+0x160/0x2c0 [c000000007287e10] c00000000000c53c system_call_common+0xec/0x250 The fix is to make sure we update high_memory on memory hotplug. This is similar to what x86 does in commit 3072e413 ("mm/memory_hotplug: introduce add_pages") Fixes: ffa0b64e ("powerpc: Fix virt_addr_valid() for 64-bit Book3E & 32-bit") Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by:
-
