- 15 Jun, 2021 5 commits
-
-
Pavel Begunkov authored
Since moving locked_free_* out of struct io_submit_state ctx->submit_state is accessed on submission side only, so move it into the submission section. Same goes for rsrc table pointers/nodes/etc., they must be taken and checked during submission because sync'ed by uring_lock, so move them there as well. Signed-off-by:
Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/8a5899a50afc6ccca63249e716f580b246f3dec6.1623709150.git.asml.silence@gmail.comSigned-off-by:
Jens Axboe <axboe@kernel.dk>
-
Pavel Begunkov authored
ctx->flags are heavily used by both, completion and submission sides, so move it out from the ctx fields related to submissions. Instead, place it together with ctx->refs, because it's already cacheline-aligned and so pads lots of space, and both almost never change. Also, in most occasions they are accessed together as refs are taken at submission time and put back during completion. Do same with ctx->rings, where the pointer itself is never modified apart from ring init/free. Note: in percpu mode, struct percpu_ref doesn't modify the struct itself but takes indirection with ref->percpu_count_ptr. Signed-off-by:
-
Pavel Begunkov authored
sq_array and sq_sqes are always used together, however they are in different cachelines, where the borderline is right before cq_overflow_list is rather rarely touched. Move the fields together so it loads only one cacheline. Signed-off-by:
-
Colin Ian King authored
The variable ret is being initialized with a value that is never read, the assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210615143424.60449-1-colin.king@canonical.comSigned-off-by:
-
Colin Ian King authored
Static analysis is warning that the sizeof being used is should be of *data->tags[i] and not data->tags[i]. Although these are the same size on 64 bit systems it is not a portable assumption to assume this is true for all cases. Fix this by using a temporary pointer tag_slot to make the code a clearer. Addresses-Coverity: ("Sizeof not portable") Fixes: d878c816 ("io_uring: hide rsrc tag copy into generic helpers") Signed-off-by:
-
- 14 Jun, 2021 28 commits
-
-
Pavel Begunkov authored
There are only two calls in source code of io_iter_do_read(), the function is small and pretty hot though is failed to get inlined. Makr it as inline. Signed-off-by:
-
Pavel Begunkov authored
Merge io_uring_cancel_sqpoll() and __io_uring_cancel() as it's easier to have a conditional ctx traverse inside than keeping them in sync. Signed-off-by:
-
Pavel Begunkov authored
tctx in submission part is always synchronised because is executed from the task's context, so we can batch allocate tctx/task references and store them across syscall boundaries. It avoids enough of operations, including an atomic for getting task ref and a percpu_counter_add() function call, which still fallback to spinlock for large batching cases (around >=32). Should be good for SQPOLL submitting in small portions and coming at some moment bpf submissions. Signed-off-by:
-
Pavel Begunkov authored
We don't really need vmalloc for keeping tags, it's not a hot path and is there out of convenience, so replace it with two level tables to not litter kernel virtual memory mappings. Signed-off-by:
-
Pavel Begunkov authored
Some parts like fixed file table use 2 level tables, factor out helpers for allocating/deallocating them as more users are to come. Signed-off-by:
-
Pavel Begunkov authored
io_rsrc_put_work() is executed by workqueue in non-irq context, so no need for irqsave/restore variants of spinlocking. Signed-off-by:
-
Pavel Begunkov authored
Make io_rsrc_data_alloc() taking care of rsrc tags loading on registration, so we don't need to repeat it for each new rsrc type. Signed-off-by:
-
Pavel Begunkov authored
io_worker_handle_work() already takes care of the empty list case and releases spinlock, so get rid of ugly conditional unlocking and unconditionally call handle_work() Signed-off-by:
-
Pavel Begunkov authored
io_wqe_worker()'s main loop does check IO_WQ_BIT_EXIT flag, so no need for a second test_bit at the end as it will immediately jump to the first check afterwards. Signed-off-by:
-
Pavel Begunkov authored
What at some moment was references to struct file used to control lifetimes of task/ctx is now just internal tctx structures/nodes, so rename outdated *task_file() routines into something more sensible. Signed-off-by:
-
Pavel Begunkov authored
A simple refactoring of io_iopoll_req_issued(), move in_async inside so we don't pass it around and save on double checking it. Signed-off-by:
-
Pavel Begunkov authored
iowq->refs is initialised to one and killed on exit, so it's not used and we can kill it. Signed-off-by:
-
Pavel Begunkov authored
io-wq keeps an array of pointers to struct io_wqe, allocate this array as a part of struct io-wq, it's easier to code and saves an extra indirection for nearly each io-wq call. Signed-off-by:
-
Pavel Begunkov authored
There is a complaint against sys_io_uring_enter() blocking if it submits stdin reads. The problem is in __io_file_supports_async(), which sees that it's a cdev and allows it to be processed inline. Punt char devices using generic rules of io_file_supports_async(), including checking for presence of *_iter() versions of rw callbacks. Apparently, it will affect most of cdevs with some exceptions like null and zero devices. Cc: stable@vger.kernel.org Reported-by:
Birk Hirdman <lonjil@gmail.com> Signed-off-by:
-
Pavel Begunkov authored
Relax buffer registration restictions, which filters out file backed memory, and allow shmem/memfd as they have normal anonymous pages underneath. Signed-off-by:
-
Pavel Begunkov authored
struct io_submit_state contains struct io_comp_state and so locked_free_*, that renders cachelines around ->locked_free* being invalidated on most non-inline completions, that may terrorise caches if submissions and completions are done by different tasks. Signed-off-by:
-
Pavel Begunkov authored
Rename io_get_cqring() into io_get_cqe() for consistency with SQ, and just because the old name is not as clear. Signed-off-by:
-
Pavel Begunkov authored
There are two copies of cq_overflow, shared with userspace and internal cached one. It was needed for DRAIN accounting, but now we have yet another knob to tune the accounting, i.e. cq_extra, and we can throw away the internal counter and just increment the one in the shared ring. If user modifies it as so never gets the right overflow value ever again, it's its problem, even though before we would have restored it back by next overflow. Signed-off-by:
-
Pavel Begunkov authored
No need to cache cq_mask, it's exactly cq_entries - 1, so just deduce it to not carry it around. Signed-off-by:
-
Pavel Begunkov authored
We have numbers of {sq,cq} entries cached in ctx, don't look up them in user-shared rings as 1) it may fetch additional cacheline 2) user may change it and so it's always error prone. Signed-off-by: -
Pavel Begunkov authored
ring has two types of resource-related fields: used for request submission, and field needed for update/registration. Reshuffle them into these two groups for better locality and readability. The second group is not in the hot path, so it's natural to place them somewhere in the end. Also update an outdated comment. Signed-off-by:
-
Pavel Begunkov authored
There is a bunch of scattered around ctx fields that are almost never used, e.g. only on ring exit, plunge them to the end, better locality, better aesthetically. Signed-off-by:
-
Pavel Begunkov authored
The main difference is in req_set_fail_links() renamed into req_set_fail(), which now sets REQ_F_FAIL_LINK/REQ_F_FAIL flag unconditional on whether it has been a link or not. It only matters in io_disarm_next(), which already handles it well, and all calls to it have a fast path checking REQ_F_LINK/HARDLINK. It looks cleaner, and sheds binary size text data bss dec hex filename 84235 12390 8 96633 17979 ./fs/io_uring.o 84151 12414 8 96573 1793d ./fs/io_uring.o Signed-off-by:
-
Pavel Begunkov authored
We don't match against files on cancellation anymore, so no need to drag around files_struct anymore, just pass a flag telling whether only inflight or all requests should be killed. Signed-off-by:
-
Pavel Begunkov authored
Going through submission in __io_sq_thread() and still having a full SQ is rather unexpected, so remove a check for SQ fullness and just wake up whoever wait on sqo_sq_wait. Also skip if it doesn't do submission in the first place, likely may to happen for SQPOLL sharing and/or IOPOLL. Signed-off-by:
-
Pavel Begunkov authored
As sqpoll cancel via task_work is killed, remove everything related to park_task_work as it's not used anymore. Signed-off-by:
-
Pavel Begunkov authored
If SQPOLL task finds a ring requesting it to continue running, no need to set wake flag to rest of the rings as it will be cleared in a moment anyway, so hide it in a single sqd->ctx_list loop. Signed-off-by:
-
Pavel Begunkov authored
As sqd->state changes rarely, don't check every event one by one but look them all at once. Add a helper function. Also don't go into event waiting sleeping with STOP flag set. Signed-off-by:
-
- 13 Jun, 2021 4 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v5.13-2021-06-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Correct buffer copying when peeking events - Sync cpufeatures/disabled-features.h header with the kernel sources * tag 'perf-tools-fixes-for-v5.13-2021-06-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: tools headers cpufeatures: Sync with the kernel sources perf session: Correct buffer copying when peeking events
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: Stable fixes: - Fix use-after-free in nfs4_init_client() Bugfixes: - Fix deadlock between nfs4_evict_inode() and nfs4_opendata_get_inode() - Fix second deadlock in nfs4_evict_inode() - nfs4_proc_set_acl should not change the value of NFS_CAP_UIDGID_NOMAP - Fix setting of the NFS_CAP_SECURITY_LABEL capability" * tag 'nfs-for-5.13-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4: Fix second deadlock in nfs4_evict_inode() NFSv4: Fix deadlock between nfs4_evict_inode() and nfs4_opendata_get_inode() NFS: FMODE_READ and friends are C macros, not enum types NFS: Fix a potential NULL dereference in nfs_get_client() NFS: Fix use-after-free in nfs4_init_client() NFS: Ensure the NFS_CAP_SECURITY_LABEL capability is set when appropriate NFSv4: nfs4_proc_set_acl needs to restore NFS_CAP_UIDGID_NOMAP on error.
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Four reasonably small fixes to the core for scsi host allocation failure paths. The root problem is that we're not freeing the memory allocated by dev_set_name(), which involves a rejig of may of the free on error paths to do put_device() instead of kfree which, in turn, has several other knock on ramifications and inspection turned up a few other lurking bugs" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: core: Only put parent device if host state differs from SHOST_CREATED scsi: core: Put .shost_dev in failure path if host state changes to RUNNING scsi: core: Fix failure handling of scsi_add_host_with_dma() scsi: core: Fix error handling of scsi_host_alloc()
-
- 12 Jun, 2021 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Palmer Dabbelt: - A pair of XIP fixes: one to fix alternatives, and one to turn off the rest of the features that require code modification - A fix to a type that was causing some alternatives to break - A build fix for BUILTIN_DTB * tag 'riscv-for-linus-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Fix BUILTIN_DTB for sifive and microchip soc riscv: alternative: fix typo in macro name riscv: code patching only works on !XIP_KERNEL riscv: xip: support runtime trap patching
-
Feng Tang authored
0day robot reported a 9.2% regression for will-it-scale mmap1 test case[1], caused by commit 57efa1fe ("mm/gup: prevent gup_fast from racing with COW during fork"). Further debug shows the regression is due to that commit changes the offset of hot fields 'mmap_lock' inside structure 'mm_struct', thus some cache alignment changes. From the perf data, the contention for 'mmap_lock' is very severe and takes around 95% cpu cycles, and it is a rw_semaphore struct rw_semaphore { atomic_long_t count; /* 8 bytes */ atomic_long_t owner; /* 8 bytes */ struct optimistic_spin_queue osq; /* spinner MCS lock */ ... Before commit 57efa1fe adds the 'write_protect_seq', it happens to have a very optimal cache alignment layout, as Linus explained: "and before the addition of the 'write_protect_seq' field, the mmap_sem was at offset 120 in 'struct mm_struct'. Which meant that count and owner were in two different cachelines, and then when you have contention and spend time in rwsem_down_write_slowpath(), this is probably *exactly* the kind of layout you want. Because first the rwsem_write_trylock() will do a cmpxchg on the first cacheline (for the optimistic fast-path), and then in the case of contention, rwsem_down_write_slowpath() will just access the second cacheline. Which is probably just optimal for a load that spends a lot of time contended - new waiters touch that first cacheline, and then they queue themselves up on the second cacheline." After the commit, the rw_semaphore is at offset 128, which means the 'count' and 'owner' fields are now in the same cacheline, and causes more cache bouncing. Currently there are 3 "#ifdef CONFIG_XXX" before 'mmap_lock' which will affect its offset: CONFIG_MMU CONFIG_MEMBARRIER CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES The layout above is on 64 bits system with 0day's default kernel config (similar to RHEL-8.3's config), in which all these 3 options are 'y'. And the layout can vary with different kernel configs. Relayouting a structure is usually a double-edged sword, as sometimes it can helps one case, but hurt other cases. For this case, one solution is, as the newly added 'write_protect_seq' is a 4 bytes long seqcount_t (when CONFIG_DEBUG_LOCK_ALLOC=n), placing it into an existing 4 bytes hole in 'mm_struct' will not change other fields' alignment, while restoring the regression. Link: https://lore.kernel.org/lkml/20210525031636.GB7744@xsang-OptiPlex-9020/ [1] Reported-by:
kernel test robot <oliver.sang@intel.com> Signed-off-by:
Feng Tang <feng.tang@intel.com> Reviewed-by:
John Hubbard <jhubbard@nvidia.com> Reviewed-by:
Jason Gunthorpe <jgg@nvidia.com> Cc: Peter Xu <peterx@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are a number of tiny USB fixes for 5.13-rc6. There are more than I would normally like, but there's been a bunch of people banging on the gadget and dwc3 and typec code recently for I think an Android release, which has resulted in a number of small fixes. It's nice to see companies send fixes upstream for this type of work, a notable change from years ago. Anyway, fixes in here are: - usb-serial device id updates - usb-serial cp210x driver fixes for broken firmware versions - typec fixes for crazy charging devices and other reported problems - dwc3 fixes for reported problems found - gadget fixes for reported problems - tiny xhci fixes - other small fixes for reported issues. - revert of a problem fix found by linux-next testing All of these have passed 0-day and linux-next testing with no reported problems (the revert for the found linux-next build problem included)" * tag 'usb-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (44 commits) Revert "usb: gadget: fsl: Re-enable driver for ARM SoCs" usb: typec: mux: Fix copy-paste mistake in typec_mux_match usb: typec: ucsi: Clear PPM capability data in ucsi_init() error path usb: gadget: fsl: Re-enable driver for ARM SoCs usb: typec: wcove: Use LE to CPU conversion when accessing msg->header USB: serial: cp210x: fix CP2102N-A01 modem control USB: serial: cp210x: fix alternate function for CP2102N QFN20 usb: misc: brcmstb-usb-pinmap: check return value after calling platform_get_resource() usb: dwc3: ep0: fix NULL pointer exception usb: gadget: eem: fix wrong eem header operation usb: typec: intel_pmc_mux: Put ACPI device using acpi_dev_put() usb: typec: intel_pmc_mux: Add missed error check for devm_ioremap_resource() usb: typec: intel_pmc_mux: Put fwnode in error case during ->probe() usb: typec: tcpm: Do not finish VDM AMS for retrying Responses usb: fix various gadget panics on 10gbps cabling usb: fix various gadgets null ptr deref on 10gbps cabling. usb: pci-quirks: disable D3cold on xhci suspend for s2idle on AMD Renoir usb: f_ncm: only first packet of aggregate needs to start timer USB: f_ncm: ncm_bitrate (speed) is unsigned MAINTAINERS: usb: add entry for isp1760 ...
-
