- 22 Jun, 2005 3 commits
-
-
bobl authored
Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Andrew Morton authored
kernel/sched.c: In function `__might_sleep': kernel/sched.c:5461: warning: int format, long unsigned int arg (arg 3) We expect irqs_disabled() to return an int (poor man's bool). Acked-by:
Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
-
- 21 Jun, 2005 19 commits
-
-
David S. Miller authored
The implementation is optimal for UltraSPARC-III and later. It will work, however suboptimally, on UltraSPARC-II and be treated as a NOP on UltraSPARC-I. It is not worth code patching this thing as the highest cost is the code space, and code patching cannot eliminate that. Signed-off-by:David S. Miller <davem@davemloft.net>
-
-
Greg KH authored
Here's a much smaller patch to simply disable devfs from the build. If this goes well, and there are no complaints for a few weeks, I'll resend my big "devfs-die-die-die" series of patches that rip the whole thing out of the kernel tree. Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
-
David S. Miller authored
Signed-off-by: -
-
David S. Miller authored
Signed-off-by: -
Patrick McHardy authored
Sit tunnel logging is currently broken: MAC=01:23:45:67:89:ab->01:23:45:47:89:ac TUNNEL=123.123. 0.123-> 12.123. 6.123 Apart from the broken IP address, MAC addresses are printed differently for sit tunnels than for everything else. Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Patrick McHardy authored
Drop reference before handing the packets to raw_rcv() Signed-off-by:
-
Patrick McHardy authored
Signed-off-by:
-
Keir Fraser authored
Signed-off-by:
Keir Fraser <Keir.Fraser@xl.cam.ac.uk> Signed-off-by:
-
Patrick McHardy authored
I missed this one when fixing up iptable_raw. Signed-off-by:
-
Phil Oester authored
Since expectation timeouts were made compulsory [1], there is no need to check for them in ip_conntrack_expect_insert. [1] https://lists.netfilter.org/pipermail/netfilter-devel/2005-January/018143.htmlSigned-off-by:
Phil Oester <kernel@linuxace.com> Signed-off-by:
-
Patrick McHardy authored
Netfilter assumes that skb->data == skb->nh.ipv6h Signed-off-by:
-
Patrick McHardy authored
Signed-off-by:
-
Patrick McHardy authored
Signed-off-by:
-
David L Stevens authored
Here is a simplified version of the patch to fix a bug in IPv6 multicasting. It: 1) adds existence check & EADDRINUSE error for regular joins 2) adds an exception for EADDRINUSE in the source-specific multicast join (where a prior join is ok) 3) adds a missing/needed read_lock on sock_mc_list; would've raced with destroying the socket on interface down without 4) adds a "leave group" in the (INCLUDE, empty) source filter case. This frees unneeded socket buffer memory, but also prevents an inappropriate interaction among the 8 socket options that mess with this. Some would fail as if in the group when you aren't really. Item #4 had a locking bug in the last version of this patch; rather than removing the idev->lock read lock only, I've simplified it to remove all lock state in the path and treat it as a direct "leave group" call for the (INCLUDE,empty) case it covers. Tested on an MP machine. :-) Much thanks to HoerdtMickael <hoerdt@clarinet.u-strasbg.fr> who reported the original bug. Signed-off-by:David L Stevens <dlstevens@us.ibm.com> Signed-off-by:
-
Jamal Hadi Salim authored
Essentially netlink at the moment always reports a pid and sequence of 0 always for v6 route activities. To understand the repurcassions of this look at: http://lists.quagga.net/pipermail/quagga-dev/2005-June/003507.html While fixing this, i took the liberty to resolve the outstanding issue of IPV6 routes inserted via ioctls to have the correct pids as well. This patch tries to behave as close as possible to the v4 routes i.e maintains whatever PID the socket issuing the command owns as opposed to the process. That made the patch a little bulky. I have tested against both netlink derived utility to add/del routes as well as ioctl derived one. The Quagga folks have tested against quagga. This fixes the problem and so far hasnt been detected to introduce any new issues. Signed-off-by:
Jamal Hadi Salim <hadi@cyberus.ca> Acked-by:
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
-
Robert Olsson authored
Signed-off-by:
Robert Olsson <Robert.Olsson@data.slu.se> Signed-off-by:
-
Alexey Kuznetsov authored
net/ipv4/tcp_diag.c uses up to ->args[4] Signed-off-by:
-
- 20 Jun, 2005 18 commits
-
-
Linus Torvalds authored
-
-
Greg Kroah-Hartman authored
Signed-off-by: -
Greg Kroah-Hartman authored
Signed-off-by: -
Jon Smirl authored
Without this change I can't set an attribute exactly PAGE_SIZE in length. There is no need for zero termination because the interface uses lengths. From: Jon Smirl <jonsmirl@gmail.com> Signed-off-by: -
Benjamin Herrenschmidt authored
I think we need this patch or we might "lose" devices to the dpm_irq_off list if a failure occurs during the suspend process. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Maneesh Soni authored
o Following patch sets the attributes for newly allocated inodes for sysfs objects. If the object has non-default attributes, inode attributes are set as saved in sysfs_dirent->s_iattr, pointer to struct iattr. Signed-off-by:
Maneesh Soni <maneesh@in.ibm.com> Signed-off-by:
-
Maneesh Soni authored
o This adds ->i_op->setattr VFS method for sysfs inodes. The changed attribues are saved in the persistent sysfs_dirent structure as a pointer to struct iattr. The struct iattr is allocated only for those sysfs_dirent's for which default attributes are getting changed. Thanks to Jon Smirl for this suggestion. Signed-off-by:
-
Maneesh Soni authored
o The following patch makes sure to attach sysfs_dirent to the dentry before allocation a new inode through sysfs_create(). This change is done as preparatory work for implementing ->i_op->setattr() functionality for sysfs objects. Signed-off-by:
-
Yani Ioannou authored
Finally (phew!) this patch demonstrates how to adapt the adm1026 to take advantage of the new callbacks, and the i2c-sysfs.h defined structure/macros. Most of the other sensor/hwmon drivers could be updated in the same way. The odd few exceptions (bmcsensors for example) however might be better off with their own custom attribute structure. Signed-off-by:
Yani Ioannou <yani.ioannou@gmail.com> Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Yani Ioannou authored
This patch creates a new header with a potential standard i2c sensor attribute type (which simply includes an int representing the sensor number/index) and the associated macros, SENSOR_DEVICE_ATTR to define a static attribute and to_sensor_dev_attr to get a sensor_device_attribute reference from an embedded device_attribute reference. Signed-off-by: -
Yani Ioannou authored
Signed-off-by:
-
Yani Ioannou authored
[PATCH] Driver Core: drivers/usb/input/aiptek.c - drivers/zorro/zorro-sysfs.c: update device attribute callbacks Signed-off-by:
-
Yani Ioannou authored
[PATCH] Driver Core: drivers/s390/net/qeth_sys.c - drivers/usb/gadget/pxa2xx_udc.c: update device attribute callbacks Signed-off-by:
-
Yani Ioannou authored
[PATCH] Driver Core: drivers/char/raw3270.c - drivers/net/netiucv.c: update device attribute callbacks Signed-off-by:
-
Yani Ioannou authored
[PATCH] Driver Core: drivers/i2c/chips/w83781d.c - drivers/s390/block/dcssblk.c: update device attribute callbacks Signed-off-by:
-
Yani Ioannou authored
Signed-off-by:
-
Yani Ioannou authored
Signed-off-by:
-
