Allow the caller in clnt.c to call into the code to wait for a reply
after calling xprt_transmit(). Again, the reason is that the backchannel
code does not need this functionality.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Separate out the action of adding a request to the reply queue so that the
backchannel code can simply skip calling it altogether.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

We will use the same lock to protect both the transmit and receive queues.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Rather than waking up the entire queue of RPC messages a second time,
just wake up the task that was put to sleep.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

When asked to wake up an RPC task, it makes sense to test whether or not
the task is still queued.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Add a helper that will wake up a task that is sleeping on a specific
queue, and will set the value of task->tk_status. This is mainly
intended for use by the transport layer to notify the task of an
error condition.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

We are going to need to pin for both send and receive.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

If the previous message was only partially transmitted, we need to close
the socket in order to avoid corruption of the message stream. To do so,
we currently hijack the unlocking of the socket in order to schedule
the close.
Now that we track the message offset in the socket state, we can move
that kind of checking out of the socket lock code, which is needed to
allow messages to remain queued after dropping the socket lock.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Rather than resetting state variables in socket state_change() callback,
do it in the sunrpc TCP connect function itself.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Since we will want to introduce similar TCP state variables for the
transmission of requests, let's rename the existing ones to label
that they are for the receive side.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Currently, we grab the socket bit lock before we allow the message
to be XDR encoded. That significantly slows down the transmission
rate, since we serialise on a potentially blocking operation.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Add states to indicate that the message send and receive are not yet
complete.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

If a message has been encoded using RPCSEC_GSS, the server is
maintaining a window of sequence numbers that it considers valid.
The client should normally be tracking that window, and needs to
verify that the sequence number used by the message being transmitted
still lies inside the window of validity.

So far, we've been able to assume this condition would be realised
automatically, since the client has been encoding the message only
after taking the socket lock. Once we change that condition, we
will need the explicit check.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Move the initialisation back into xprt.c.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Miguel writes:
  "A trivial fix for auxdisplay

    - MAINTAINERS reference fix for moved file
      Reported by Joe Perches"

* tag 'auxdisplay-for-greg-v4.19-rc6' of https://github.com/ojeda/linux:
  MAINTAINERS: fix reference to moved drivers/{misc => auxdisplay}/panel.c

Merge tag 'libnvdimm-fixes2-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Dan writes:
  "filesystem-dax for 4.19-rc6

   Fix a deadlock in the new for 4.19 dax_lock_mapping_entry() routine."

* tag 'libnvdimm-fixes2-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  dax: Fix deadlock in dax_lock_mapping_entry()

Commit 51c1e9b5 ("auxdisplay: Move panel.c to drivers/auxdisplay folder")
moved the file, but the MAINTAINERS reference was not updated.

Link: https://lore.kernel.org/lkml/20180928220131.31075-1-joe@perches.com/Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>

Jens writes:
  "Block fixes for 4.19-rc6

   A set of fixes that should go into this release. This pull request
   contains:

   - A fix (hopefully) for the persistent grants for xen-blkfront. A
     previous fix from this series wasn't complete, hence reverted, and
     this one should hopefully be it. (Boris Ostrovsky)

   - Fix for an elevator drain warning with SMR devices, which is
     triggered when you switch schedulers (Damien)

   - bcache deadlock fix (Guoju Fang)

   - Fix for the block unplug tracepoint, which has had the
     timer/explicit flag reverted since 4.11 (Ilya)

   - Fix a regression in this series where the blk-mq timeout hook is
     invoked with the RCU read lock held, hence preventing it from
     blocking (Keith)

   - NVMe pull from Christoph, with a single multipath fix (Susobhan Dey)"

* tag 'for-linus-20180929' of git://git.kernel.dk/linux-block:
  xen/blkfront: correct purging of persistent grants
  Revert "xen/blkfront: When purging persistent grants, keep them in the buffer"
  blk-mq: I/O and timer unplugs are inverted in blktrace
  bcache: add separate workqueue for journal_write to avoid deadlock
  xen/blkfront: When purging persistent grants, keep them in the buffer
  block: fix deadline elevator drain for zoned block devices
  blk-mq: Allow blocking queue tag iter callbacks
  nvme: properly propagate errors in nvme_mpath_init

Thomas writes:
  "A single fix for the AMD memory encryption boot code so it does not
   read random garbage instead of the cached encryption bit when a kexec
   kernel is allocated above the 32bit address limit."

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Fix kexec booting failure in the SEV bit detection code

Thomas writes:
  "Three small fixes for clocksource drivers:
   - Proper error handling in the Atmel PIT driver
   - Add CLOCK_SOURCE_SUSPEND_NONSTOP for TI SoCs so suspend works again
   - Fix the next event function for Facebook Backpack-CMM BMC chips so
     usleep(100) doesnt sleep several milliseconds"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/timer-atmel-pit: Properly handle error cases
  clocksource/drivers/fttmr010: Fix set_next_event handler
  clocksource/drivers/ti-32k: Add CLOCK_SOURCE_SUSPEND_NONSTOP flag for non-am43 SoCs

Thomas writes:
  "A single fix for a missing sanity check when a pinned event is tried
  to be read on the wrong CPU due to a legit event scheduling failure."

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Add sanity check to deal with pinned event failure

Rafael writes:
  "Power management fix for 4.19-rc6

   Fix incorrect __init and __exit annotations in the Qualcomm
   Kryo cpufreq driver (Nathan Chancellor)."

* tag 'pm-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: qcom-kryo: Fix section annotations

There is currently a warning when building the Kryo cpufreq driver into
the kernel image:

WARNING: vmlinux.o(.text+0x8aa424): Section mismatch in reference from
the function qcom_cpufreq_kryo_probe() to the function
.init.text:qcom_cpufreq_kryo_get_msm_id()
The function qcom_cpufreq_kryo_probe() references
the function __init qcom_cpufreq_kryo_get_msm_id().
This is often because qcom_cpufreq_kryo_probe lacks a __init
annotation or the annotation of qcom_cpufreq_kryo_get_msm_id is wrong.

Remove the '__init' annotation from qcom_cpufreq_kryo_get_msm_id
so that there is no more mismatch warning.

Additionally, Nick noticed that the remove function was marked as
'__init' when it should really be marked as '__exit'.

Fixes: 46e2856b (cpufreq: Add Kryo CPU scaling driver)
Fixes: 5ad7346b (cpufreq: kryo: Add module remove and exit)
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 4.18+ <stable@vger.kernel.org> # 4.18+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Christoph writes:
  "dma mapping fix for 4.19-rc6

   fix a missing Kconfig symbol for commits introduced in 4.19-rc"

* tag 'dma-mapping-4.19-3' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: add the missing ARCH_HAS_SYNC_DMA_FOR_CPU_ALL declaration

Dmitry writes:
  "Input updates for v4.19-rc5

   Just a few driver fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: uinput - allow for max == min during input_absinfo validation
  Input: elantech - enable middle button of touchpad on ThinkPad P72
  Input: atakbd - fix Atari CapsLock behaviour
  Input: atakbd - fix Atari keymap
  Input: egalax_ts - add system wakeup support
  Input: gpio-keys - fix a documentation index issue

Mark writes:
  "spi: Fixes for v4.19

   Quite a few fixes for the Renesas drivers in here, plus a fix for the
   Tegra driver and some documentation fixes for the recently added
   spi-mem code.  The Tegra fix is relatively large but fairly
   straightforward and mechanical, it runs on probe so it's been
   reasonably well covered in -next testing."

* tag 'spi-fix-v4.19-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: spi-mem: Move the DMA-able constraint doc to the kerneldoc header
  spi: spi-mem: Add missing description for data.nbytes field
  spi: rspi: Fix interrupted DMA transfers
  spi: rspi: Fix invalid SPI use during system suspend
  spi: sh-msiof: Fix handling of write value for SISTR register
  spi: sh-msiof: Fix invalid SPI use during system suspend
  spi: gpio: Fix copy-and-paste error
  spi: tegra20-slink: explicitly enable/disable clock

Merge tag 'regulator-v4.19-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Mark writes:
  "regulator: Fixes for 4.19

   A collection of fairly minor bug fixes here, a couple of driver
   specific ones plus two core fixes.  There's one fix for the new
   suspend state code which fixes some confusion with constant values
   that are supposed to indicate noop operation and another fixing a
   race condition with the creation of sysfs files on new regulators."

* tag 'regulator-v4.19-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: fix crash caused by null driver data
  regulator: Fix 'do-nothing' value for regulators without suspend state
  regulator: da9063: fix DT probing with constraints
  regulator: bd71837: Disable voltage monitoring for LDO3/4

Michael writes:
  "powerpc fixes for 4.19 #3

   A reasonably big batch of fixes due to me being away for a few weeks.

   A fix for the TM emulation support on Power9, which could result in
   corrupting the guest r11 when running under KVM.

   Two fixes to the TM code which could lead to userspace GPR corruption
   if we take an SLB miss at exactly the wrong time.

   Our dynamic patching code had a bug that meant we could patch freed
   __init text, which could lead to corrupting userspace memory.

   csum_ipv6_magic() didn't work on little endian platforms since we
   optimised it recently.

   A fix for an endian bug when reading a device tree property telling
   us how many storage keys the machine has available.

   Fix a crash seen on some configurations of PowerVM when migrating the
   partition from one machine to another.

   A fix for a regression in the setup of our CPU to NUMA node mapping
   in KVM guests.

   A fix to our selftest Makefiles to make them work since a recent
   change to the shared Makefile logic."

* tag 'powerpc-4.19-3' of https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  selftests/powerpc: Fix Makefiles for headers_install change
  powerpc/numa: Use associativity if VPHN hcall is successful
  powerpc/tm: Avoid possible userspace r1 corruption on reclaim
  powerpc/tm: Fix userspace r13 corruption
  powerpc/pseries: Fix unitialized timer reset on migration
  powerpc/pkeys: Fix reading of ibm, processor-storage-keys property
  powerpc: fix csum_ipv6_magic() on little endian platforms
  powerpc/powernv/ioda2: Reduce upper limit for DMA window size (again)
  powerpc: Avoid code patching freed init sections
  KVM: PPC: Book3S HV: Fix guest r11 corruption with POWER9 TM workarounds

Linus writes:
  "Pin control fixes for v4.19:
   - Fixes to x86 hardware:
   - AMD interrupt debounce issues
   - Faulty Intel cannonlake register offset
   - Revert pin translation IRQ locking"

* tag 'pinctrl-v4.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  Revert "pinctrl: intel: Do pin translation when lock IRQ"
  pinctrl: cannonlake: Fix HOSTSW_OWN register offset of H variant
  pinctrl/amd: poll InterruptEnable bits in amd_gpio_irq_set_type

It is possible that a failure can occur during the scheduling of a
pinned event. The initial portion of perf_event_read_local() contains
the various error checks an event should pass before it can be
considered valid. Ensure that the potential scheduling failure
of a pinned event is checked for and have a credible error.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: fenghua.yu@intel.com
Cc: tony.luck@intel.com
Cc: acme@kernel.org
Cc: gavin.hindman@intel.com
Cc: jithu.joseph@intel.com
Cc: dave.hansen@intel.com
Cc: hpa@zytor.com
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/6486385d1f30336e9973b24c8c65f5079543d3d3.1537377064.git.reinette.chatre@intel.com

Dave writes:
  "drm fixes for 4.19-rc6

   Looks like a pretty normal week for graphics,

   core: syncobj fix, panel link regression revert
   amd: suspend/resume fixes, EDID emulation fix
   mali-dp: NV12 writeback and vblank reset fixes
   etnaviv: DMA setup fix"

* tag 'drm-fixes-2018-09-28' of git://anongit.freedesktop.org/drm/drm:
  drm/amd/display: Fix Edid emulation for linux
  drm/amd/display: Fix Vega10 lightup on S3 resume
  drm/amdgpu: Fix vce work queue was not cancelled when suspend
  Revert "drm/panel: Add device_link from panel device to DRM device"
  drm/syncobj: Don't leak fences when WAIT_FOR_SUBMIT is set
  drm/malidp: Fix writeback in NV12
  drm: mali-dp: Call drm_crtc_vblank_reset on device init
  drm/etnaviv: add DMA configuration for etnaviv platform device

Merge tag 'riscv-for-linus-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux

Palmer writes:
  "A Single RISC-V Update for 4.19-rc6

   The Debian guys have been pushing on our port and found some
   unversioned symbols leaking into modules.  This PR contains a single
   fix for that issue."

* tag 'riscv-for-linus-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
  RISC-V: include linux/ftrace.h in asm-prototypes.h

Bjorn writes:
  "PCI fixes:

  - Fix ACPI hotplug issue that causes black screen crash at boot (Mika
    Westerberg)

  - Fix DesignWare "scheduling while atomic" issues (Jisheng Zhang)

  - Add PPC contacts to MAINTAINERS for PCI core error handling (Bjorn
    Helgaas)

  - Sort Mobiveil MAINTAINERS entry (Lorenzo Pieralisi)"

* tag 'pci-v4.19-fixes-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  ACPI / hotplug / PCI: Don't scan for non-hotplug bridges if slot is not bridge
  PCI: dwc: Fix scheduling while atomic issues
  MAINTAINERS: Move mobiveil PCI driver entry where it belongs
  MAINTAINERS: Update PPC contacts for PCI core error handling

Pull NVMe fix from Christoph.

* 'nvme-4.19' of git://git.infradead.org/nvme:
  nvme: properly propagate errors in nvme_mpath_init

Commit a46b5367 ("xen/blkfront: cleanup
stale persistent grants") introduced a regression as purged persistent
grants were not pu into the list of free grants again. Correct that.
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Fix didn't work for all cases, reverting to add a (hopefully)
better fix.

This reverts commit f151ba98.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Commit b2d35fa5 ("selftests: add headers_install to lib.mk")
introduced a requirement that Makefiles more than one level below the
selftests directory need to define top_srcdir, but it didn't update
any of the powerpc Makefiles.

This broke building all the powerpc selftests with eg:

  make[1]: Entering directory '/src/linux/tools/testing/selftests/powerpc'
  BUILD_TARGET=/src/linux/tools/testing/selftests/powerpc/alignment; mkdir -p $BUILD_TARGET; make OUTPUT=$BUILD_TARGET -k -C alignment all
  make[2]: Entering directory '/src/linux/tools/testing/selftests/powerpc/alignment'
  ../../lib.mk:20: ../../../../scripts/subarch.include: No such file or directory
  make[2]: *** No rule to make target '../../../../scripts/subarch.include'.
  make[2]: Failed to remake makefile '../../../../scripts/subarch.include'.
  Makefile:38: recipe for target 'alignment' failed

Fix it by setting top_srcdir in the affected Makefiles.

Fixes: b2d35fa5 ("selftests: add headers_install to lib.mk")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>