- 28 Sep, 2018 5 commits
-
-
SZ Lin (林上智) authored
Add support for Moxa UC-2101 open platform The UC-2101 computing platform is designed for industrial embedded data acquisition and processing applications. The features of UC-2101 are: * eMMC * SPI flash * 1x LAN * 1x RS-232/422/485 ports, software-selectable * EEPROM * TPM 2.0 * Watchdog * RTC * User gpio-keys * User LEDs * User button Signed-off-by:
Wes Huang (黃淵河) <wes.huang@moxa.com> Signed-off-by:
Fero JD Zhou (周俊達) <FeroJD.Zhou@moxa.com> Signed-off-by:
SZ Lin (林上智) <sz.lin@moxa.com> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
SZ Lin (林上智) authored
The UC-2100 series consists many boards with different peripheral devices and wireless modules, hence we fetch common items and create a common dtsi file to increase reusability. All boards in UC-2100 series will include this common dtsi file. Signed-off-by:
-
H. Nikolaus Schaller authored
Since SMPS10 and OTG cable detection extcon are described here, and work to enable OTG power when an OTG cable is plugged in, we can define OTG mode in the controller (which is disabled by default in omap5.dtsi). Tested on OMAP5EVM and Pyra. Suggested-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by:
-
Vignesh R authored
Add ti,syscon-unaligned-access property to PCIe RC nodes to set appropriate bits in CTRL_CORE_SMA_SW_7 register to enable workaround for errata i870. Signed-off-by:
Vignesh R <vigneshr@ti.com> Signed-off-by:
-
Vignesh R authored
Bit positions of PCIE_SS1_AXI2OCP_LEGACY_MODE_ENABLE and PCIE_SS1_AXI2OCP_LEGACY_MODE_ENABLE in CTRL_CORE_SMA_SW_7 are incorrectly documented in the TRM. In fact, the bit positions are swapped. Update the DT bindings for PCIe EP to reflect the same. Fixes: d23f3839 ("ARM: dts: DRA7: Add pcie1 dt node for EP mode") Cc: stable@vger.kernel.org Signed-off-by:
-
- 27 Sep, 2018 1 commit
-
-
H. Nikolaus Schaller authored
We have defined a new DTS and it should be compiled. Signed-off-by:
-
- 24 Sep, 2018 5 commits
-
-
Andreas Kemnade authored
Pullup and down settings were missing, so add them to avoid floating pins and make headset detection working. Signed-off-by:
Andreas Kemnade <andreas@kemnade.info> Signed-off-by:
-
Hans Verkuil authored
Add CEC support to the tda998x. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Adam Ford authored
The full AM3517-EVM shipped with an add-on board which contained two Audio codecs, a GPIO expander with a variety of buttons, and some other features. This patch enables these portions of the UI board because they don't directly conflict with existing features. Signed-off-by:
Adam Ford <aford173@gmail.com> Signed-off-by:
-
Andreas Kemnade authored
This enables the possibility to have more aggressive runtime pm by providing proper wakeup irq for the serial console. Signed-off-by:
-
Keerthy authored
am574x-idk has no cpu vdd-supply at the moment. Hence hook smps12 regulator as cpu vdd-supply in am57xx-idk-common as the same regulator feeds on to cpu on am571/2/4-idks. So remove all the individual instances and place that in common place. Signed-off-by:
Keerthy <j-keerthy@ti.com> Signed-off-by:
-
- 20 Sep, 2018 29 commits
-
-
Suzuki K Poulose authored
Switch to the new coresight bindings for hardware ports Cc: linux-omap@vger.kernel.org Cc: "Benoît Cousson" <bcousson@baylibre.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by:
-
Rob Herring authored
dtc has new checks for I2C and SPI buses. Fix the warnings in node names and unit-addresses. arch/arm/boot/dts/am437x-idk-evm.dtb: Warning (spi_bus_bridge): /ocp@44000000/qspi@47900000: node name for SPI buses should be 'spi' arch/arm/boot/dts/am437x-sk-evm.dtb: Warning (spi_bus_bridge): /ocp@44000000/qspi@47900000: node name for SPI buses should be 'spi' arch/arm/boot/dts/am43x-epos-evm.dtb: Warning (spi_bus_bridge): /ocp@44000000/qspi@47900000: node name for SPI buses should be 'spi' arch/arm/boot/dts/omap3-n9.dtb: Warning (i2c_bus_reg): /ocp@68000000/i2c@48060000/ak8975@0f: I2C bus unit address format error, expected "f" arch/arm/boot/dts/am335x-osd3358-sm-red.dtb: Warning (i2c_bus_reg): /ocp/i2c@44e0b000/pressure@78: I2C bus unit address format error, expected "76" arch/arm/boot/dts/am335x-boneblack.dtb: Warning (i2c_bus_reg): /ocp/i2c@44e0b000/tda19988: I2C bus unit address format error, expected "70" arch/arm/boot/dts/am335x-boneblack-wireless.dtb: Warning (i2c_bus_reg): /ocp/i2c@44e0b000/tda19988: I2C bus unit address format error, expected "70" arch/arm/boot/dts/am335x-sancloud-bbe.dtb: Warning (i2c_bus_reg): /ocp/i2c@44e0b000/tda19988: I2C bus unit address format error, expected "70" arch/arm/boot/dts/am571x-idk.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi' arch/arm/boot/dts/am572x-idk.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi' arch/arm/boot/dts/am574x-idk.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi' arch/arm/boot/dts/am57xx-cl-som-am57x.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi' arch/arm/boot/dts/am57xx-sbc-am57x.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi' arch/arm/boot/dts/dra72-evm.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi' arch/arm/boot/dts/dra72-evm-revc.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi' arch/arm/boot/dts/dra76-evm.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi' arch/arm/boot/dts/dra7-evm.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi' arch/arm/boot/dts/am335x-pdu001.dtb: Warning (spi_bus_reg): /ocp/spi@481a0000/cfaf240320a032t: SPI bus unit address format error, expected "0" arch/arm/boot/dts/keystone-k2g-evm.dtb: Warning (spi_bus_bridge): /soc@0/qspi@2940000: node name for SPI buses should be 'spi' arch/arm/boot/dts/keystone-k2g-ice.dtb: Warning (spi_bus_bridge): /soc@0/qspi@2940000: node name for SPI buses should be 'spi' Cc: "Benoît Cousson" <bcousson@baylibre.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Santosh Shilimkar <ssantosh@kernel.org> Cc: linux-omap@vger.kernel.org Signed-off-by:
Rob Herring <robh@kernel.org> [tony@atomide.com: fixed mode to 644 for am335x-osd3358-sm-red.dts while at it] Signed-off-by:
-
Grygorii Strashko authored
The phy_id property is deprecated and phy-handle has to be used instead. Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
-
Grygorii Strashko authored
The phy_id property is deprecated and phy-handle has to be used instead. Signed-off-by:
-
Grygorii Strashko authored
The phy_id property is deprecated and phy-handle has to be used instead. Signed-off-by:
-
Grygorii Strashko authored
The phy_id property is deprecated and phy-handle has to be used instead. Signed-off-by:
-
Grygorii Strashko authored
The phy_id property is deprecated and phy-handle has to be used instead. Signed-off-by:
-
Grygorii Strashko authored
The phy_id property is deprecated and phy-handle has to be used instead. Signed-off-by:
-
Grygorii Strashko authored
The phy_id property is deprecated and phy-handle has to be used instead. Signed-off-by:
-
Grygorii Strashko authored
The phy_id property is deprecated and phy-handle has to be used instead. Signed-off-by:
-
Grygorii Strashko authored
The phy_id property is deprecated and phy-handle has to be used instead. Signed-off-by:
-
Grygorii Strashko authored
The phy_id property is deprecated and phy-handle has to be used instead. Signed-off-by:
-
Grygorii Strashko authored
The phy_id property is deprecated and phy-handle has to be used instead. Signed-off-by:
-
Grygorii Strashko authored
The phy_id property is deprecated and phy-handle has to be used instead. Signed-off-by:
-
Grygorii Strashko authored
The phy_id property is deprecated and phy-handle has to be used instead. Signed-off-by:
-
Grygorii Strashko authored
The phy_id property is deprecated and phy-handle has to be used instead. Signed-off-by:
-
Grygorii Strashko authored
The phy_id property is deprecated and phy-handle has to be used instead. Signed-off-by:
-
Grygorii Strashko authored
The phy_id property is deprecated and phy-handle has to be used instead. Signed-off-by:
-
Grygorii Strashko authored
The phy_id property is deprecated and phy-handle has to be used instead. Signed-off-by:
-
Grygorii Strashko authored
The phy_id property is deprecated and phy-handle has to be used instead. Signed-off-by:
-
Grygorii Strashko authored
The phy_id property is deprecated and phy-handle has to be used instead. Signed-off-by:
-
Grygorii Strashko authored
The phy_id property is deprecated and phy-handle has to be used instead. Signed-off-by:
-
Grygorii Strashko authored
The phy_id property is deprecated and phy-handle has to be used instead. Signed-off-by:
-
Grygorii Strashko authored
The phy_id property is deprecated and phy-handle has to be used instead. Signed-off-by:
-
Grygorii Strashko authored
The phy_id property is deprecated and phy-handle has to be used instead. Signed-off-by:
-
Grygorii Strashko authored
The phy_id property is deprecated and phy-handle has to be used instead. Signed-off-by:
-
Grygorii Strashko authored
The phy_id property is deprecated and phy-handle has to be used instead. Signed-off-by:
-
Grygorii Strashko authored
The phy_id property is deprecated and phy-handle has to be used instead. Signed-off-by:
-
Tony Lindgren authored
-
