- 01 Apr, 2016 40 commits
-
-
Ioan-Adrian Ratiu authored
commit e470127e upstream. The critical section protected by usbhid->lock in hid_ctrl() is too big and because of this it causes a recursive deadlock. "Too big" means the case statement and the call to hid_input_report() do not need to be protected by the spinlock (no URB operations are done inside them). The deadlock happens because in certain rare cases drivers try to grab the lock while handling the ctrl irq which grabs the lock before them as described above. For example newer wacom tablets like 056a:033c try to reschedule proximity reads from wacom_intuos_schedule_prox_event() calling hid_hw_request() -> usbhid_request() -> usbhid_submit_report() which tries to grab the usbhid lock already held by hid_ctrl(). There are two ways to get out of this deadlock: 1. Make the drivers work "around" the ctrl critical region, in the wacom case for ex. by delaying the scheduling of the proximity read request itself to a workqueue. 2. Shrink the critical region so the usbhid lock protects only the instructions which modify usbhid state, calling hid_input_report() with the spinlock unlocked, allowing the device driver to grab the lock first, finish and then grab the lock afterwards in hid_ctrl(). This patch implements the 2nd solution. Signed-off-by:
Ioan-Adrian Ratiu <adi@adirat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> [bwh: Backported to 3.2: adjust context] Cc: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Vasily Kulikov authored
commit 8a5e5e02 upstream. Poison pointer values should be small enough to find a room in non-mmap'able/hardly-mmap'able space. E.g. on x86 "poison pointer space" is located starting from 0x0. Given unprivileged users cannot mmap anything below mmap_min_addr, it should be safe to use poison pointers lower than mmap_min_addr. The current poison pointer values of LIST_POISON{1,2} might be too big for mmap_min_addr values equal or less than 1 MB (common case, e.g. Ubuntu uses only 0x10000). There is little point to use such a big value given the "poison pointer space" below 1 MB is not yet exhausted. Changing it to a smaller value solves the problem for small mmap_min_addr setups. The values are suggested by Solar Designer: http://www.openwall.com/lists/oss-security/2015/05/02/6Signed-off-by:
Vasily Kulikov <segoon@openwall.com> Cc: Solar Designer <solar@openwall.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Vladis Dronov authored
commit 8e20cf2b upstream. The aiptek driver crashes in aiptek_probe() when a specially crafted USB device without endpoints is detected. This fix adds a check that the device has proper configuration expected by the driver. Also an error return value is changed to more matching one in one of the error paths. Reported-by:
Ralf Spenneberg <ralf@spenneberg.net> Signed-off-by:
Vladis Dronov <vdronov@redhat.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Martin Schwidefsky authored
commit 3446c13b upstream. The fork of a process with four page table levels is broken since git commit 6252d702 "[S390] dynamic page tables." All new mm contexts are created with three page table levels and an asce limit of 4TB. If the parent has four levels dup_mmap will add vmas to the new context which are outside of the asce limit. The subsequent call to copy_page_range will walk the three level page table structure of the new process with non-zero pgd and pud indexes. This leads to memory clobbers as the pgd_index *and* the pud_index is added to the mm->pgd pointer without a pgd_deref in between. The init_new_context() function is selecting the number of page table levels for a new context. The function is used by mm_init() which in turn is called by dup_mm() and mm_alloc(). These two are used by fork() and exec(). The init_new_context() function can distinguish the two cases by looking at mm->context.asce_limit, for fork() the mm struct has been copied and the number of page table levels may not change. For exec() the mm_alloc() function set the new mm structure to zero, in this case a three-level page table is created as the temporary stack space is located at STACK_TOP_MAX = 4TB. This fixes CVE-2016-2143. Reported-by:
Marcin Kościelnicki <koriakin@0x04.net> Reviewed-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> [bwh: Backported to 3.2: - 31-bit s390 is still supported so keep the #ifdef CONFIG_64BIT conditions - Split page table locks are not implemented for PMDs so don't call pgtable_pmd_page_{ctor,dtor}() - PMDs are not accounted so don't call mm_inc_nr_pmds() - Adjust context] Signed-off-by:
-
Linus Torvalds authored
commit 256faedc upstream. This reverts commit dbb17a21. It turns out that commit can cause problems for systems with multiple GPUs, and causes X to hang on at least a HP Pavilion dv7 with hybrid graphics. This got noticed originally in 4.4.4, where this patch had already gotten back-ported, but 4.5-rc7 was verified to have the same problem. Alexander Deucher says: "It looks like you have a muxed system so I suspect what's happening is that one of the display is being reported as connected for both the IGP and the dGPU and then the desktop environment gets confused or there some sort problem in the detect functions since the mux is not switched to the dGPU. I don't see an easy fix unless Dave has any ideas. I'd say just revert for now" Reported-by:
Jörg-Volker Peetz <jvpeetz@web.de> Acked-by:
Alexander Deucher <Alexander.Deucher@amd.com> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by:
-
Richard Weinberger authored
commit e4f6daac upstream. ubi_start_leb_change() allocates too few bytes. ubi_more_leb_change_data() will write up to req->upd_bytes + ubi->min_io_size bytes. Signed-off-by:
Richard Weinberger <richard@nod.at> Reviewed-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
Maciej W. Rozycki authored
commit e723e3f7 upstream. Avoid sending a partially initialised `siginfo_t' structure along SIGFPE signals issued from `do_ov' and `do_trap_or_bp', leading to information leaking from the kernel stack. Signed-off-by:
Maciej W. Rozycki <macro@imgtec.com> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Benjamin Poirier authored
commit 1837b2e2 upstream. The current reserved_tailroom calculation fails to take hlen and tlen into account. skb: [__hlen__|__data____________|__tlen___|__extra__] ^ ^ head skb_end_offset In this representation, hlen + data + tlen is the size passed to alloc_skb. "extra" is the extra space made available in __alloc_skb because of rounding up by kmalloc. We can reorder the representation like so: [__hlen__|__data____________|__extra__|__tlen___] ^ ^ head skb_end_offset The maximum space available for ip headers and payload without fragmentation is min(mtu, data + extra). Therefore, reserved_tailroom = data + extra + tlen - min(mtu, data + extra) = skb_end_offset - hlen - min(mtu, skb_end_offset - hlen - tlen) = skb_tailroom - min(mtu, skb_tailroom - tlen) ; after skb_reserve(hlen) Compare the second line to the current expression: reserved_tailroom = skb_end_offset - min(mtu, skb_end_offset) and we can see that hlen and tlen are not taken into account. The min() in the third line can be expanded into: if mtu < skb_tailroom - tlen: reserved_tailroom = skb_tailroom - mtu else: reserved_tailroom = tlen Depending on hlen, tlen, mtu and the number of multicast address records, the current code may output skbs that have less tailroom than dev->needed_tailroom or it may output more skbs than needed because not all space available is used. Fixes: 4c672e4b ("ipv6: mld: fix add_grhead skb_over_panic for devs with large MTUs") Signed-off-by:
Benjamin Poirier <bpoirier@suse.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
David S. Miller <davem@davemloft.net> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Or Gerlitz authored
commit 11d8d645 upstream. According to IBTA spec v1.3 section 12.7.19, QPs should use GRH when the path returned by the SA has hop-limit > 0. Currently, we do that only for the > 1 case, fix that. Fixes: 6d969a47 ('IB/sa: Add ib_init_ah_from_path()') Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Todd E Brandt authored
commit 92f9e179 upstream. Pause/unpause graph tracing around do_suspend_lowlevel as it has inconsistent call/return info after it jumps to the wakeup vector. The graph trace buffer will otherwise become misaligned and may eventually crash and hang on suspend. To reproduce the issue and test the fix: Run a function_graph trace over suspend/resume and set the graph function to suspend_devices_and_enter. This consistently hangs the system without this fix. Signed-off-by:
Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Takashi Iwai authored
commit 197b958c upstream. The OSS sequencer client tries to drain the pending events at releasing. Unfortunately, as spotted by syzkaller fuzzer, this may lead to an unkillable process state when the event has been queued at the far future. Since the process being released can't be signaled any longer, it remains and waits for the echo-back event in that far future. Back to history, the draining feature was implemented at the time we misinterpreted POSIX definition for blocking file operation. Actually, such a behavior is superfluous at release, and we should just release the device as is instead of keeping it up forever. This patch just removes the draining call that may block the release for too long time unexpectedly. BugLink: http://lkml.kernel.org/r/CACT4Y+Y4kD-aBGj37rf-xBw9bH3GMU6P+MYg4W1e-s-paVD2pg@mail.gmail.comReported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> [bwh: Backported to 3.2: snd_seq_oss_drain_write() has an extra log statement to be deleted] Signed-off-by:
-
Yegor Yefremov authored
commit c0992d0f upstream. Add support for Quectel UC20 and blacklist the QMI interface. Signed-off-by:
Yegor Yefremov <yegorslists@googlemail.com> [johan: amend commit message ] Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit 8019c0b3 upstream. The DRC Mode like "AIF1DRC1 Mode" and EQ Mode like "AIF1.1 EQ Mode" in wm8994 codec driver are enum ctls, while the current driver accesses wrongly via value.integer.value[]. They have to be via value.enumerated.item[] instead. Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit d0784829 upstream. "MBC Mode", "VSS Mode", "VSS HPF Mode" and "Enhanced EQ Mode" ctls in wm8958 codec driver are enum, while the current driver accesses wrongly via value.integer.value[]. They have to be via value.enumerated.item[] instead. Signed-off-by:
-
Vittorio Alfieri authored
commit 3c4c615d upstream. The Parrot NMEA GPS Flight Recorder is a USB composite device consisting of hub, flash storage, and cp210x usb to serial chip. It is an accessory to the mass-produced Parrot AR Drone 2. The device emits standard NMEA messages which make the it compatible with NMEA compatible software. It was tested using gpsd version 3.11-3 as an NMEA interpreter and using the official Parrot Flight Recorder. Signed-off-by:
Vittorio Alfieri <vittorio88@gmail.com> Signed-off-by:
-
Takashi Iwai authored
commit eab3c4db upstream. snd-hdsp driver accesses enum item values (int) instead of boolean values (long) wrongly for some ctl elements. This patch fixes them. Signed-off-by:
-
Takashi Iwai authored
commit 537e4813 upstream. snd-hdspm driver accesses enum item values (int) instead of boolean values (long) wrongly for some ctl elements. This patch fixes them. Signed-off-by:
-
Takashi Iwai authored
commit 3a72494a upstream. The timer user status compat ioctl returned the bogus struct used for 64bit architectures instead of the 32bit one. This patch addresses it to return the proper struct. Signed-off-by:
-
Mikulas Patocka authored
commit b6853f78 upstream. The delete opration can allocate additional space on the HPFS filesystem due to btree split. The HPFS driver checks in advance if there is available space, so that it won't corrupt the btree if we run out of space during splitting. If there is not enough available space, the HPFS driver attempted to truncate the file, but this results in a deadlock since the commit 7dd29d8d ("HPFS: Introduce a global mutex and lock it on every callback from VFS"). This patch removes the code that tries to truncate the file and -ENOSPC is returned instead. If the user hits -ENOSPC on delete, he should try to delete other files (that are stored in a leaf btree node), so that the delete operation will make some space for deleting the file stored in non-leaf btree node. Reported-by:
Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by:
Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by:
-
Andrea Arcangeli authored
commit ad33bb04 upstream. pmd_trans_unstable()/pmd_none_or_trans_huge_or_clear_bad() were introduced to locklessy (but atomically) detect when a pmd is a regular (stable) pmd or when the pmd is unstable and can infinitely transition from pmd_none() and pmd_trans_huge() from under us, while only holding the mmap_sem for reading (for writing not). While holding the mmap_sem only for reading, MADV_DONTNEED can run from under us and so before we can assume the pmd to be a regular stable pmd we need to compare it against pmd_none() and pmd_trans_huge() in an atomic way, with pmd_trans_unstable(). The old pmd_trans_huge() left a tiny window for a race. Useful applications are unlikely to notice the difference as doing MADV_DONTNEED concurrently with a page fault would lead to undefined behavior. [akpm@linux-foundation.org: tidy up comment grammar/layout] Signed-off-by:
Andrea Arcangeli <aarcange@redhat.com> Reported-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by:
-
Gabriel Krisman Bertazi authored
commit 21b81716 upstream. Commit d63c7dd5 ("ipr: Fix out-of-bounds null overwrite") removed the end of line handling when storing the update_fw sysfs attribute. This changed the userpace API because it started refusing writes terminated by a line feed, which broke the update tools we already have. This patch re-adds that handling, so both a write terminated by a line feed or not can make it through with the update. Fixes: d63c7dd5 ("ipr: Fix out-of-bounds null overwrite") Signed-off-by:
Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Cc: Insu Yun <wuninsu@gmail.com> Acked-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Insu Yun authored
commit d63c7dd5 upstream. Return value of snprintf is not bound by size value, 2nd argument. (https://www.kernel.org/doc/htmldocs/kernel-api/API-snprintf.html). Return value is number of printed chars, can be larger than 2nd argument. Therefore, it can write null byte out of bounds ofbuffer. Since snprintf puts null, it does not need to put additional null byte. Signed-off-by:
Insu Yun <wuninsu@gmail.com> Reviewed-by:
Shane Seymour <shane.seymour@hpe.com> Signed-off-by:
-
Harvey Hunt authored
commit 4ee34ea3 upstream. The id buffer in ata_device is a DMA target, but it isn't explicitly cacheline aligned. Due to this, adjacent fields can be overwritten with stale data from memory on non coherent architectures. As a result, the kernel is sometimes unable to communicate with an ATA device. Fix this by ensuring that the id buffer is cacheline aligned. This issue is similar to that fixed by Commit 84bda12a ("libata: align ap->sector_buf"). Signed-off-by:
Harvey Hunt <harvey.hunt@imgtec.com> Cc: linux-kernel@vger.kernel.org Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
David Woodhouse authored
commit be629c62 upstream. When a directory is deleted, we don't take too much care about killing off all the dirents that belong to it — on the basis that on remount, the scan will conclude that the directory is dead anyway. This doesn't work though, when the deleted directory contained a child directory which was moved *out*. In the early stages of the fs build we can then end up with an apparent hard link, with the child directory appearing both in its true location, and as a child of the original directory which are this stage of the mount process we don't *yet* know is defunct. To resolve this, take out the early special-casing of the "directories shall not have hard links" rule in jffs2_build_inode_pass1(), and let the normal nlink processing happen for directories as well as other inodes. Then later in the build process we can set ic->pino_nlink to the parent inode#, as is required for directories during normal operaton, instead of the nlink. And complain only *then* about hard links which are still in evidence even after killing off all the unreachable paths. Reported-by:
Liu Song <liu.song11@zte.com.cn> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Signed-off-by:
-
David Woodhouse authored
commit 49e91e70 upstream. With this fix, all code paths should now be obtaining the page lock before f->sem. Reported-by:
Szabó Tamás <sztomi89@gmail.com> Tested-by:
Thomas Betker <thomas.betker@rohde-schwarz.com> Signed-off-by:
-
Thomas Betker authored
commit 157078f6 upstream. This reverts commit 5ffd3412 ("jffs2: Fix lock acquisition order bug in jffs2_write_begin"). The commit modified jffs2_write_begin() to remove a deadlock with jffs2_garbage_collect_live(), but this introduced new deadlocks found by multiple users. page_lock() actually has to be called before mutex_lock(&c->alloc_sem) or mutex_lock(&f->sem) because jffs2_write_end() and jffs2_readpage() are called with the page locked, and they acquire c->alloc_sem and f->sem, resp. In other words, the lock order in jffs2_write_begin() was correct, and it is the jffs2_garbage_collect_live() path that has to be changed. Revert the commit to get rid of the new deadlocks, and to clear the way for a better fix of the original deadlock. Reported-by:
Deng Chao <deng.chao1@zte.com.cn> Reported-by:
Ming Liu <liu.ming50@gmail.com> Reported-by:
wangzaiwei <wangzaiwei@top-vision.cn> Signed-off-by:
-
Christian Borntraeger authored
commit d7444794 upstream. In async_pf we try to allocate with NOWAIT to get an element quickly or fail. This code also handle failures gracefully. Lets silence potential page allocation failures under load. qemu-system-s39: page allocation failure: order:0,mode:0x2200000 [...] Call Trace: ([<00000000001146b8>] show_trace+0xf8/0x148) [<000000000011476a>] show_stack+0x62/0xe8 [<00000000004a36b8>] dump_stack+0x70/0x98 [<0000000000272c3a>] warn_alloc_failed+0xd2/0x148 [<000000000027709e>] __alloc_pages_nodemask+0x94e/0xb38 [<00000000002cd36a>] new_slab+0x382/0x400 [<00000000002cf7ac>] ___slab_alloc.constprop.30+0x2dc/0x378 [<00000000002d03d0>] kmem_cache_alloc+0x160/0x1d0 [<0000000000133db4>] kvm_setup_async_pf+0x6c/0x198 [<000000000013dee8>] kvm_arch_vcpu_ioctl_run+0xd48/0xd58 [<000000000012fcaa>] kvm_vcpu_ioctl+0x372/0x690 [<00000000002f66f6>] do_vfs_ioctl+0x3be/0x510 [<00000000002f68ec>] SyS_ioctl+0xa4/0xb8 [<0000000000781c5e>] system_call+0xd6/0x264 [<000003ffa24fa06a>] 0x3ffa24fa06a Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by:
Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Stefan Hajnoczi authored
commit b7052cd7 upstream. The qword_get() function NUL-terminates its output buffer. If the input string is in hex format \xXXXX... and the same length as the output buffer, there is an off-by-one: int qword_get(char **bpp, char *dest, int bufsize) { ... while (len < bufsize) { ... *dest++ = (h << 4) | l; len++; } ... *dest = '\0'; return len; } This patch ensures the NUL terminator doesn't fall outside the output buffer. Signed-off-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Felix Fietkau authored
commit 7a36b930 upstream. The value 5000 was put here with the addition of the timeout field to ieee80211_start_tx_ba_session. It was originally added in mac80211 to save resources for drivers like iwlwifi, which only supports a limited number of concurrent aggregation sessions. Since iwlwifi does not use minstrel_ht and other drivers don't need this, 0 is a better default - especially since there have been recent reports of aggregation setup related issues reproduced with ath9k. This should improve stability without causing any adverse effects. Acked-by:
Avery Pennarun <apenwarr@gmail.com> Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Gerhard Uttenthaler authored
commit 90cfde46 upstream. This patch fixes the problem that more CAN messages could be sent to the interface as could be send on the CAN bus. This was more likely for slow baud rates. The sleeping _start_xmit was woken up in the _write_bulk_callback. Under heavy TX load this produced another bulk transfer without checking the free_slots variable and hence caused the overflow in the interface. Signed-off-by:
Gerhard Uttenthaler <uttenthaler@ems-wuensche.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Simon Guinot authored
commit 59ceeaaf upstream. In __request_region, if a conflict with a BUSY and MUXED resource is detected, then the caller goes to sleep and waits for the resource to be released. A pointer on the conflicting resource is kept. At wake-up this pointer is used as a parent to retry to request the region. A first problem is that this pointer might well be invalid (if for example the conflicting resource have already been freed). Another problem is that the next call to __request_region() fails to detect a remaining conflict. The previously conflicting resource is passed as a parameter and __request_region() will look for a conflict among the children of this resource and not at the resource itself. It is likely to succeed anyway, even if there is still a conflict. Instead, the parent of the conflicting resource should be passed to __request_region(). As a fix, this patch doesn't update the parent resource pointer in the case we have to wait for a muxed region right after. Reported-and-tested-by:
Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by:
Simon Guinot <simon.guinot@sequanux.org> Tested-by:
Vincent Donnefort <vdonnefort@gmail.com> Signed-off-by:
-
Jan Kara authored
commit ed8ad838 upstream. ext4 can update bh->b_state non-atomically in _ext4_get_block() and ext4_da_get_block_prep(). Usually this is fine since bh is just a temporary storage for mapping information on stack but in some cases it can be fully living bh attached to a page. In such case non-atomic update of bh->b_state can race with an atomic update which then gets lost. Usually when we are mapping bh and thus updating bh->b_state non-atomically, nobody else touches the bh and so things work out fine but there is one case to especially worry about: ext4_finish_bio() uses BH_Uptodate_Lock on the first bh in the page to synchronize handling of PageWriteback state. So when blocksize < pagesize, we can be atomically modifying bh->b_state of a buffer that actually isn't under IO and thus can race e.g. with delalloc trying to map that buffer. The result is that we can mistakenly set / clear BH_Uptodate_Lock bit resulting in the corruption of PageWriteback state or missed unlock of BH_Uptodate_Lock. Fix the problem by always updating bh->b_state bits atomically. Reported-by:
Nikolay Borisov <kernel@kyup.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> [bwh: Backported to 3.2: - s/READ_ONCE/ACCESS_ONCE/ - Adjust context] Signed-off-by:
-
Alexandra Yates authored
commit f5bdd66c upstream. This patch complements the list of device IDs previously added for lewisburg sata. Signed-off-by:
Alexandra Yates <alexandra.yates@linux.intel.com> Signed-off-by:
-
Bjørn Mork authored
commit d061c1ca upstream. Thomas reports: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=05c6 ProdID=6001 Rev=00.00 S: Manufacturer=USB Modem S: Product=USB Modem S: SerialNumber=1234567890ABCDEF C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Reported-by:
Thomas Schäfer <tschaefer@t-online.de> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Ken Lin authored
commit 6627ae19 upstream. Add USB ID for cp2104/5 devices on GE B650v3 and B850v3 boards. Signed-off-by:
Ken Lin <ken.lin@advantech.com.tw> Signed-off-by:
Akshay Bhat <akshay.bhat@timesys.com> Signed-off-by:
-
Andrey Skvortsov authored
commit 3158a8d4 upstream. $ lsusb: Bus 001 Device 101: ID 1e0e:9001 Qualcomm / Option $ usb-devices: T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=101 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 2 P: Vendor=1e0e ProdID=9001 Rev= 2.32 S: Manufacturer=SimTech, Incorporated S: Product=SimTech, Incorporated S: SerialNumber=0123456789ABCDEF C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) The last interface (6) is used for Android Composite ADB interface. Serial port layout: 0: QCDM/DIAG 1: NMEA 2: AT 3: AT/PPP 4: audio Signed-off-by:
Andrey Skvortsov <andrej.skvortzov@gmail.com> Signed-off-by:
-
Amir Vadai authored
commit 281e8b2f upstream. RdropOvflw counts overrun of HW buffer, therefore should be used for rx_fifo_errors only. Currently RdropOvflw counter is mistakenly also set into rx_missed_errors and rx_over_errors too, which makes the device total dropped packets accounting to show wrong results. Fix that. Use it for rx_fifo_errors only. Fixes: c27a02cd ('mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC') Signed-off-by:
Amir Vadai <amir@vadai.me> Signed-off-by:
Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by:
-
John Youn authored
commit c4509601 upstream. The assignement of EP transfer resources was not handled properly in the dwc3 driver. Commit aebda618 ("usb: dwc3: Reset the transfer resource index on SET_INTERFACE") previously fixed one aspect of this where resources may be exhausted with multiple calls to SET_INTERFACE. However, it introduced an issue where composite devices with multiple interfaces can be assigned the same transfer resources for different endpoints. This patch solves both issues. The assignment of transfer resources cannot perfectly follow the data book due to the fact that the controller driver does not have all knowledge of the configuration in advance. It is given this information piecemeal by the composite gadget framework after every SET_CONFIGURATION and SET_INTERFACE. Trying to follow the databook programming model in this scenario can cause errors. For two reasons: 1) The databook says to do DEPSTARTCFG for every SET_CONFIGURATION and SET_INTERFACE (8.1.5). This is incorrect in the scenario of multiple interfaces. 2) The databook does not mention doing more DEPXFERCFG for new endpoint on alt setting (8.1.6). The following simplified method is used instead: All hardware endpoints can be assigned a transfer resource and this setting will stay persistent until either a core reset or hibernation. So whenever we do a DEPSTARTCFG(0) we can go ahead and do DEPXFERCFG for every hardware endpoint as well. We are guaranteed that there are as many transfer resources as endpoints. This patch triggers off of the calling dwc3_gadget_start_config() for EP0-out, which always happens first, and which should only happen in one of the above conditions. Fixes: aebda618 ("usb: dwc3: Reset the transfer resource index on SET_INTERFACE") Reported-by:
Ravi Babu <ravibabu@ti.com> Signed-off-by:
John Youn <johnyoun@synopsys.com> Signed-off-by:
Felipe Balbi <balbi@kernel.org> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Toshi Kani authored
commit a82eee74 upstream. Data corruption issues were observed in tests which initiated a system crash/reset while accessing BTT devices. This problem is reproducible. The BTT driver calls pmem_rw_bytes() to update data in pmem devices. This interface calls __copy_user_nocache(), which uses non-temporal stores so that the stores to pmem are persistent. __copy_user_nocache() uses non-temporal stores when a request size is 8 bytes or larger (and is aligned by 8 bytes). The BTT driver updates the BTT map table, which entry size is 4 bytes. Therefore, updates to the map table entries remain cached, and are not written to pmem after a crash. Change __copy_user_nocache() to use non-temporal store when a request size is 4 bytes. The change extends the current byte-copy path for a less-than-8-bytes request, and does not add any overhead to the regular path. Reported-and-tested-by:
Micah Parrish <micah.parrish@hpe.com> Reported-and-tested-by:
Brian Boylston <brian.boylston@hpe.com> Signed-off-by:
Toshi Kani <toshi.kani@hpe.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: linux-nvdimm@lists.01.org Link: http://lkml.kernel.org/r/1455225857-12039-3-git-send-email-toshi.kani@hpe.com [ Small readability edits. ] Signed-off-by:
Ingo Molnar <mingo@kernel.org> [bwh: Backported to 3.2: aadjust filename, context] Signed-off-by:
-
Toshi Kani authored
commit ee9737c9 upstream. Add comments to __copy_user_nocache() to clarify its procedures and alignment requirements. Also change numeric branch target labels to named local labels. No code changed: arch/x86/lib/copy_user_64.o: text data bss dec hex filename 1239 0 0 1239 4d7 copy_user_64.o.before 1239 0 0 1239 4d7 copy_user_64.o.after md5: 58bed94c2db98c1ca9a2d46d0680aaae copy_user_64.o.before.asm 58bed94c2db98c1ca9a2d46d0680aaae copy_user_64.o.after.asm Signed-off-by:
-
