- 05 Nov, 2020 12 commits
-
-
Anitha Chrisanthus authored
This is a basic KMS atomic modesetting display driver for KeemBay family of SOCs. Driver has no 2D or 3D graphics. It calls into the ADV bridge driver at the connector level. Single CRTC with LCD controller->mipi DSI->ADV bridge Only 1080p resolution and single plane is supported at this time. v2: moved extern to .h, removed license text use drm_dev_init, upclassed dev_private, removed HAVE_IRQ.(Sam) v3: Squashed all 59 commits to one v4: review changes from Sam Ravnborg renamed dev_p to kmb moved clocks under kmb_clock, consolidated clk initializations use drmm functions use DRM_GEM_CMA_DRIVER_OPS_VMAP v5: corrected spellings v6: corrected checkpatch warnings v7: review changes Sam Ravnborg and Thomas Zimmerman removed kmb_crtc.h kmb_crtc_cleanup (Thomas) renamed mode_set, kmb_load, inlined unload (Thomas) moved remaining logging to drm_*(Thomas) re-orged driver initialization (Thomas) moved plane_status to drm_private (Sam) removed unnecessary logs and defines and ifdef codes (Sam) call helper_check in plane_atomic_check (Sam) renamed set to get for bpp and format functions(Sam) use drm helper functions for reset, duplicate/destroy state instead of kmb functions (Sam) removed kmb_priv from kmb_plane and removed kmb_plane_state (Sam) v8: get clk_pll0 from display node in dt v9: moved csc_coef_lcd to plane.c (Daniel Vetter) call drm_atomic_helper_shutdown in remove (Daniel V) use drm_crtc_handle_vblank (Daniel V) renamed kmb_dsi_hw_init to kmb_dsi_mode_set (Daniel V) complimentary changes to device tree changes (Rob) v10: call drm_crtc_arm_vblank_event in atomic_flush (Daniel V) moved global vars to kmb_private and added locks (Daniel V) changes in driver to accommodate changes in DT to separate DSI entries (Sam R) review changes to separate mipi DSI (Sam R) v11: review changes to separate msscam (Neil A,Sam R) v12: fixed warnings Reported-by: kernel test robot <lkp@intel.com> Signed-off-by:Anitha Chrisanthus <anitha.chrisanthus@intel.com> Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Anitha Chrisanthus authored
Register definitions for Keem Bay display driver v2: removed license text (Sam) v3: Squashed all 59 commits to one v4: review changes from Sam Ravnborg renamed dev_p to kmb v5: corrected spellings v6: corrected checkpatch warnings v7: removed redundant definitions v8: removed redundant definitions, clean up (Sam R) Signed-off-by:
-
Anitha Chrisanthus authored
This patch adds bindings for Intel KeemBay MIPI DSI v2: corrected description for port Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Rob Herring <robh@kernel.org> Signed-off-by:
-
Anitha Chrisanthus authored
This patch add bindings for Intel KeemBay MSSCAM syscon v2: fixed compatible (Sam R.) Signed-off-by:
-
Anitha Chrisanthus authored
This patch adds bindings for Intel KeemBay Display v2: review changes from Rob Herring v3: review changes from Sam Ravnborg (removed mipi dsi entries, and encoder entry, connect port to dsi) MSSCAM is part of the display submodule and its used to reset LCD and MIPI DSI clocks, so its best to be on this device tree. v4: review changes from Neil Armstrong and Sam - removed msscam entries Signed-off-by: -
Christian König authored
The kernel test robot is not happy with that. This reverts commit 0227da01. Signed-off-by:
Christian König <christian.koenig@amd.com> Acked-by:
Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/394772/
-
Christian König authored
The kernel test robot is not happy with that. This reverts commit 2b5b95b1. Signed-off-by:
-
Jianxin Xiong authored
Here is the warning message: drivers/dma-buf/dma-buf.c:917 dma_buf_map_attachment() error: 'sg_table' dereferencing possible ERR_PTR() Fix by adding error checking before dereferencing the pointer. Fixes: ac80cd17 ("dma-buf: Clarify that dma-buf sg lists are page aligned") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Jianxin Xiong <jianxin.xiong@intel.com> Reviewed-by:
-
Christian König authored
Add the new vma_set_file() function to allow changing vma->vm_file with the necessary refcount dance. v2: add more users of this. v3: add missing EXPORT_SYMBOL, rebase on mmap cleanup, add comments why we drop the reference on two occasions. v4: make it clear that changing an anonymous vma is illegal. Signed-off-by:Jason Gunthorpe <jgg@nvidia.com> Link: https://patchwork.freedesktop.org/patch/394773/
-
Christian König authored
Patch "495c10cc CHROMIUM: dma-buf: restore args..." adds a workaround for a bug in mmap_region. As the comment states ->mmap() callback can change vma->vm_file and so we might call fput() on the wrong file. Revert the workaround and proper fix this in mmap_region. v2: drop the extra if in dma_buf_mmap as well Signed-off-by:
-
Sergey Senozhatsky authored
We observed that some of virtio_gpu_object_shmem_init() allocations can be rather costly - order 6 - which can be difficult to fulfill under memory pressure conditions. Switch to kvmalloc_array() in virtio_gpu_object_shmem_init() and let the kernel vmalloc the entries array. Signed-off-by:
Sergey Senozhatsky <senozhatsky@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20201105014744.1662226-1-senozhatsky@chromium.orgSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com>
-
Simon Ser authored
User-space doesn't need to keep track of blobs that might be in use by the kernel. User-space can just destroy blobs as soon as they don't need them anymore. Signed-off-by:
Simon Ser <contact@emersion.fr> Signed-off-by:
Daniel Stone <daniel@fooishbar.org> Reviewed-by:
Jonas Ådahl <jadahl@gmail.com> Reviewed-by:
Pekka Paalanen <pekka.paalanen@collabora.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/wgav99DTGfubfVPiurrydQEiyufYpxlJQZ0wJMWYBQ@cp7-web-042.plabs.ch
-
- 04 Nov, 2020 4 commits
-
-
Simon Ser authored
Other properties are documented with a colon character after the property name. Consistently using a colon character allows the docs to be machine-readable. Signed-off-by:
-
Yejune Deng authored
devm_reset_control_array_get_optional_exclusive() looks more readable Signed-off-by:
Yejune Deng <yejune.deng@gmail.com> Reviewed-by:
Steven Price <steven.price@arm.com> Signed-off-by:
-
Christian König authored
The ttm_operation_ctx structure has a mixture of flags and bools. Drop the flags and replace them with bools as well. v2: fix typos, improve comments Signed-off-by:
-
Christian König authored
During eviction we do want to trigger the OOM killer. Only while doing new allocations we should try to avoid that and return -ENOMEM to the application. v2: rename the flag to gfp_retry_mayfail. Signed-off-by:
-
- 03 Nov, 2020 4 commits
-
-
Maxime Ripard authored
Now that atomic_check takes the global atomic state as a parameter, we don't need to go through the pointer in the CRTC state. This was done using the following coccinelle script: @ crtc_atomic_func @ identifier helpers; identifier func; @@ static struct drm_crtc_helper_funcs helpers = { ..., .atomic_check = func, ..., }; @@ identifier crtc_atomic_func.func; identifier crtc, state; @@ func(struct drm_crtc *crtc, struct drm_atomic_state *state) { ... - struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc); ... when != crtc_state - crtc_state->state + state ... } @@ struct drm_crtc_state *crtc_state; identifier crtc_atomic_func.func; identifier crtc, state; @@ func(struct drm_crtc *crtc, struct drm_atomic_state *state) { ... - crtc_state->state + state ... } Suggested-by:Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Reviewed-by:
-
Maxime Ripard authored
dispnv50 references the crtc->state pointer in order to get the current CRTC state in its atomic_check hook, which would be the old CRTC state in the global atomic state. Use the drm_atomic_get_old_crtc_state helper to get that state to make it more obvious. Suggested-by:
-
Thomas Zimmermann authored
Trying to copy into the string fields with strncpy() gives a warning from gcc. Both fields are part of a packed HDMI header and do not require a terminating \0 character. ../drivers/video/hdmi.c: In function 'hdmi_spd_infoframe_init': ../drivers/video/hdmi.c:230:2: warning: 'strncpy' specified bound 8 equals destination size [-Wstringop-truncation] 230 | strncpy(frame->vendor, vendor, sizeof(frame->vendor)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../drivers/video/hdmi.c:231:2: warning: 'strncpy' specified bound 16 equals destination size [-Wstringop-truncation] 231 | strncpy(frame->product, product, sizeof(frame->product)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Just use memcpy() instead. Signed-off-by:Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
-
Boris Brezillon authored
Commit a17d609e ("drm/panfrost: Don't corrupt the queue mutex on open/close") left unused variables behind, thus generating a warning at compilation time. Remove those variables. Fixes: a17d609e ("drm/panfrost: Don't corrupt the queue mutex on open/close") Signed-off-by:
Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by:
-
- 02 Nov, 2020 7 commits
-
-
Jason Gunthorpe authored
Since commit 9a40401c ("lib/scatterlist: Do not limit max_segment to PAGE_ALIGNED values") the max_segment input to sg_alloc_table_from_pages() does not have to be any special value. The new algorithm will always create something less than what the user provides. Thus eliminate this confusing constant. - vmwgfx should use the HW capability, not mix in the OS page size for calling dma_set_max_seg_size() - i915 uses i915_sg_segment_size() both for sg_alloc_table_from_pages and for some open coded sgl construction. This doesn't change the value since rounddown(size, UINT_MAX) == SCATTERLIST_MAX_SEGMENT - drm_prime_pages_to_sg uses it as a default if max_segment is zero, UINT_MAX is fine to use directly. Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Qian Cai <cai@lca.pw> Cc: "Ursulin, Tvrtko" <tvrtko.ursulin@intel.com> Suggested-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Bernard Zhao authored
In function drm_bridge_connector_get_modes_edid, drm_edid_is_valid will check weather (!edid), no need to check again in the if branch. Signed-off-by:
Bernard Zhao <bernard@vivo.com> Signed-off-by:
-
KuoHsiang Chou authored
[New] Create the setting for 1600x900 @60Hz refresh rate by 108MHz pixel-clock. Signed-off-by:KuoHsiang Chou <kuohsiang_chou@aspeedtech.com> Signed-off-by:
-
Maxime Ripard authored
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's start convert all the remaining helpers to provide a consistent interface, starting with the CRTC's atomic_begin and atomic_flush. The conversion was done using the coccinelle script below, built tested on all the drivers and actually tested on vc4. virtual report @@ struct drm_crtc_helper_funcs *FUNCS; identifier old_crtc_state, old_state; identifier crtc; identifier f; @@ f(struct drm_crtc_state *old_crtc_state) { ... struct drm_atomic_state *old_state = old_crtc_state->state; <... - FUNCS->atomic_begin(crtc, old_crtc_state); + FUNCS->atomic_begin(crtc, old_state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; identifier old_crtc_state, old_state; identifier crtc; identifier f; @@ f(struct drm_crtc_state *old_crtc_state) { ... struct drm_atomic_state *old_state = old_crtc_state->state; <... - FUNCS->atomic_flush(crtc, old_crtc_state); + FUNCS->atomic_flush(crtc, old_state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; identifier dev, state; identifier f; @@ f(struct drm_device *dev, struct drm_atomic_state *state, ...) { <... - FUNCS->atomic_begin(crtc, crtc_state); + FUNCS->atomic_begin(crtc, state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; identifier dev, state; identifier f; @@ f(struct drm_device *dev, struct drm_atomic_state *state, ...) { <... - FUNCS->atomic_flush(crtc, crtc_state); + FUNCS->atomic_flush(crtc, state); ...> } @@ identifier crtc, old_state; @@ struct drm_crtc_helper_funcs { ... - void (*atomic_begin)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_begin)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... - void (*atomic_flush)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_flush)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... } @ crtc_atomic_func @ identifier helpers; identifier func; @@ ( static struct drm_crtc_helper_funcs helpers = { ..., .atomic_begin = func, ..., }; | static struct drm_crtc_helper_funcs helpers = { ..., .atomic_flush = func, ..., }; ) @ ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { ... when != old_state } @ adds_old_state depends on crtc_atomic_func && !ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { + struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc); ... } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; expression E; type T; @@ void func(...) { ... - T state = E; + T crtc_state = E; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; type T; @@ void func(...) { ... - T state; + T crtc_state; <+... - state + crtc_state ...+> } @@ identifier old_state; identifier crtc; @@ void vc4_hvs_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { + struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc); ... } @@ identifier old_state; identifier crtc; @@ void vc4_hvs_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ); @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_begin(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_begin(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ); @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ); @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; identifier old_state; identifier crtc; @@ void func(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_old_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_old_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Signed-off-by: -
Maxime Ripard authored
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's start convert all the remaining helpers to provide a consistent interface, starting with the CRTC's atomic_check. The conversion was done using the coccinelle script below, built tested on all the drivers and actually tested on vc4. virtual report @@ struct drm_crtc_helper_funcs *FUNCS; struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; identifier dev, state; identifier ret, f; @@ f(struct drm_device *dev, struct drm_atomic_state *state) { <... - ret = FUNCS->atomic_check(crtc, crtc_state); + ret = FUNCS->atomic_check(crtc, state); ...> } @@ identifier crtc, new_state; @@ struct drm_crtc_helper_funcs { ... - int (*atomic_check)(struct drm_crtc *crtc, struct drm_crtc_state *new_state); + int (*atomic_check)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... } @ crtc_atomic_func @ identifier helpers; identifier func; @@ static struct drm_crtc_helper_funcs helpers = { ..., .atomic_check = func, ..., }; @ ignores_new_state @ identifier crtc_atomic_func.func; identifier crtc, new_state; @@ int func(struct drm_crtc *crtc, struct drm_crtc_state *new_state) { ... when != new_state } @ adds_new_state depends on crtc_atomic_func && !ignores_new_state @ identifier crtc_atomic_func.func; identifier crtc, new_state; @@ int func(struct drm_crtc *crtc, struct drm_crtc_state *new_state) { + struct drm_crtc_state *new_state = drm_atomic_get_new_crtc_state(state, crtc); ... } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; expression E; type T; @@ int func(...) { ... - T state = E; + T crtc_state = E; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; type T; @@ int func(...) { ... - T state; + T crtc_state; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; identifier new_state; identifier crtc; @@ int func(struct drm_crtc *crtc, - struct drm_crtc_state *new_state + struct drm_atomic_state *state ) { ... } @@ identifier new_state; identifier crtc; @@ int vmw_du_crtc_atomic_check(struct drm_crtc *crtc, - struct drm_crtc_state *new_state + struct drm_atomic_state *state ) { + struct drm_crtc_state *new_state = drm_atomic_get_new_crtc_state(state, crtc); ... } @@ identifier new_state; identifier crtc; @@ int vmw_du_crtc_atomic_check(struct drm_crtc *crtc, - struct drm_crtc_state *new_state + struct drm_atomic_state *state ); @ include depends on adds_new_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_new_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Signed-off-by: -
Maxime Ripard authored
It seems that a recent commit broke the nouveau compilation when swiotlb is disabled (which is the case on our ARM defconfig for example). Daniel says """ Since the proper fix is maybe stuck in the usual "drm abuses swiotlb internals" bikeshed, maybe best if we push a fix to including limits.h in nouveau and call it done? """ So let's go down the simplest path to fix our build, and goes back to it later if needed. Link: https://patchwork.freedesktop.org/patch/397835/ Fixes: 4dbafbd3 ("drm/nouveu: fix swiotlb include") Acked-by:
-
Maxime Ripard authored
Daniel needs -rc2 in drm-misc-next to merge some patches Signed-off-by:
-
- 01 Nov, 2020 12 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "Three fixes all related to #DB: - Handle the BTF bit correctly so it doesn't get lost due to a kernel #DB - Only clear and set the virtual DR6 value used by ptrace on user space triggered #DB. A kernel #DB must leave it alone to ensure data consistency for ptrace. - Make the bitmasking of the virtual DR6 storage correct so it does not lose DR_STEP" * tag 'x86-urgent-2020-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/debug: Fix DR_STEP vs ptrace_get_debugreg(6) x86/debug: Only clear/set ->virtual_dr6 for userspace #DB x86/debug: Fix BTF handling -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "A few fixes for timers/timekeeping: - Prevent undefined behaviour in the timespec64_to_ns() conversion which is used for converting user supplied time input to nanoseconds. It lacked overflow protection. - Mark sched_clock_read_begin/retry() to prevent recursion in the tracer - Remove unused debug functions in the hrtimer and timerlist code" * tag 'timers-urgent-2020-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time: Prevent undefined behaviour in timespec64_to_ns() timers: Remove unused inline funtion debug_timer_free() hrtimer: Remove unused inline function debug_hrtimer_free() time/sched_clock: Mark sched_clock_read_begin/retry() as notrace -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull smp fix from Thomas Gleixner: "A single fix for stop machine. Mark functions no trace to prevent a crash caused by recursion when enabling or disabling a tracer on RISC-V (probably all architectures which patch through stop machine)" * tag 'smp-urgent-2020-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: stop_machine, rcu: Mark functions as notrace
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixes from Thomas Gleixner: "A couple of locking fixes: - Fix incorrect failure injection handling in the fuxtex code - Prevent a preemption warning in lockdep when tracking local_irq_enable() and interrupts are already enabled - Remove more raw_cpu_read() usage from lockdep which causes state corruption on !X86 architectures. - Make the nr_unused_locks accounting in lockdep correct again" * tag 'locking-urgent-2020-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: lockdep: Fix nr_unused_locks accounting locking/lockdep: Remove more raw_cpu_read() usage futex: Fix incorrect should_fail_futex() handling lockdep: Fix preemption WARN for spurious IRQ-enable -
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc fixes/removals from Greg KH: "Here's some small fixes for 5.10-rc2 and a big driver removal. The fixes are for some reported issues in the interconnect and coresight drivers, nothing major. The "big" driver removal is the MIC drivers have been asked to be removed as the hardware never shipped and Intel no longer wants to maintain something that no one can use. This is welcomed by many as the DMA usage of these drivers was "interesting" and the security people were starting to question some issues that were starting to be found in the codebase. Note, one of the subsystems for this driver, the "VOP" code, will probably come back in future kernel versions as it was looking to potentially solve some PCIe virtualization issues that a number of other vendors were wanting to solve. But as-is, this codebase didn't work for anyone else so no actual functionality is being removed. All of these have been in linux-next with no reported issues" * tag 'char-misc-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: coresight: cti: Initialize dynamic sysfs attributes coresight: Fix uninitialised pointer bug in etm_setup_aux() coresight: add module license misc: mic: remove the MIC drivers interconnect: qcom: use icc_sync state for sm8[12]50 interconnect: qcom: Ensure that the floor bandwidth value is enforced interconnect: qcom: sc7180: Init BCMs before creating the nodes interconnect: qcom: sdm845: Init BCMs before creating the nodes interconnect: Aggregate before setting initial bandwidth interconnect: qcom: sdm845: Enable keepalive for the MM1 BCM
-
Linus Torvalds authored
Merge tag 'driver-core-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core and documentation fixes from Greg KH: "Here is one tiny debugfs change to fix up an API where the last user was successfully fixed up in 5.10-rc1 (so it couldn't be merged earlier), and a much larger Documentation/ABI/ update to the files so they can be automatically parsed by our tools. The Documentation/ABI/ updates are just formatting issues, small ones to bring the files into parsable format, and have been acked by numerous subsystem maintainers and the documentation maintainer. I figured it was good to get this into 5.10-rc2 to help wih the merge issues that would arise if these were to stick in linux-next until 5.11-rc1. The debugfs change has been in linux-next for a long time, and the Documentation updates only for the last linux-next release" * tag 'driver-core-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (40 commits) scripts: get_abi.pl: assume ReST format by default docs: ABI: sysfs-class-led-trigger-pattern: remove hw_pattern duplication docs: ABI: sysfs-class-backlight: unify ABI documentation docs: ABI: sysfs-c2port: remove a duplicated entry docs: ABI: sysfs-class-power: unify duplicated properties docs: ABI: unify /sys/class/leds/<led>/brightness documentation docs: ABI: stable: remove a duplicated documentation docs: ABI: change read/write attributes docs: ABI: cleanup several ABI documents docs: ABI: sysfs-bus-nvdimm: use the right format for ABI docs: ABI: vdso: use the right format for ABI docs: ABI: fix syntax to be parsed using ReST notation docs: ABI: convert testing/configfs-acpi to ReST docs: Kconfig/Makefile: add a check for broken ABI files docs: abi-testing.rst: enable --rst-sources when building docs docs: ABI: don't escape ReST-incompatible chars from obsolete and removed docs: ABI: create a 2-depth index for ABI docs: ABI: make it parse ABI/stable as ReST-compatible files docs: ABI: sysfs-uevent: make it compatible with ReST output docs: ABI: testing: make the files compatible with ReST output ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver fixes from Greg KH: "Here are some small staging driver fixes for issues that have been reported in 5.10-rc1: - octeon driver fixes - wfx driver fixes - memory leak fix in vchiq driver - fieldbus driver bugfix - comedi driver bugfix All of these have been in linux-next with no reported issues" * tag 'staging-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: fieldbus: anybuss: jump to correct label in an error path staging: wfx: fix test on return value of gpiod_get_value() staging: wfx: fix use of uninitialized pointer staging: mmal-vchiq: Fix memory leak for vchiq_instance staging: comedi: cb_pcidas: Allow 2-channel commands for AO subdevice staging: octeon: Drop on uncorrectable alignment or FCS error staging: octeon: repair "fixed-link" support
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial fixes from Greg KH: "Here are some small TTY and Serial driver fixes for reported issues for 5.10-rc2. They include: - vt ioctl bugfix for reported problems - fsl_lpuart serial driver fix - 21285 serial driver bugfix All have been in linux-next with no reported issues" * tag 'tty-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: vt_ioctl: fix GIO_UNIMAP regression vt: keyboard, extend func_buf_lock to readers vt: keyboard, simplify vt_kdgkbsent tty: serial: fsl_lpuart: LS1021A has a FIFO size of 16 words, like LS1028A tty: serial: 21285: fix lockup on open
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB driver fixes from Greg KH: "Here are a number of small bugfixes for reported issues in some USB drivers. They include: - typec bugfixes - xhci bugfixes and lockdep warning fixes - cdc-acm driver regression fix - kernel doc fixes - cdns3 driver bugfixes for a bunch of reported issues - other tiny USB driver fixes All have been in linux-next with no reported issues" * tag 'usb-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: cdns3: gadget: own the lock wrongly at the suspend routine usb: cdns3: Fix on-chip memory overflow issue usb: cdns3: gadget: suspicious implicit sign extension xhci: Don't create stream debugfs files with spinlock held. usb: xhci: Workaround for S3 issue on AMD SNPS 3.0 xHC xhci: Fix sizeof() mismatch usb: typec: stusb160x: fix signedness comparison issue with enum variables usb: typec: add missing MODULE_DEVICE_TABLE() to stusb160x USB: apple-mfi-fastcharge: don't probe unhandled devices usbcore: Check both id_table and match() when both available usb: host: ehci-tegra: Fix error handling in tegra_ehci_probe() usb: typec: stusb160x: fix an IS_ERR() vs NULL check in probe usb: typec: tcpm: reset hard_reset_count for any disconnect usb: cdc-acm: fix cooldown mechanism usb: host: fsl-mph-dr-of: check return of dma_set_mask() usb: fix kernel-doc markups usb: typec: stusb160x: fix some signedness bugs usb: cdns3: Variable 'length' set but not used
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "ARM: - selftest fix - force PTE mapping on device pages provided via VFIO - fix detection of cacheable mapping at S2 - fallback to PMD/PTE mappings for composite huge pages - fix accounting of Stage-2 PGD allocation - fix AArch32 handling of some of the debug registers - simplify host HYP entry - fix stray pointer conversion on nVHE TLB invalidation - fix initialization of the nVHE code - simplify handling of capabilities exposed to HYP - nuke VCPUs caught using a forbidden AArch32 EL0 x86: - new nested virtualization selftest - miscellaneous fixes - make W=1 fixes - reserve new CPUID bit in the KVM leaves" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: vmx: remove unused variable KVM: selftests: Don't require THP to run tests KVM: VMX: eVMCS: make evmcs_sanitize_exec_ctrls() work again KVM: selftests: test behavior of unmapped L2 APIC-access address KVM: x86: Fix NULL dereference at kvm_msr_ignored_check() KVM: x86: replace static const variables with macros KVM: arm64: Handle Asymmetric AArch32 systems arm64: cpufeature: upgrade hyp caps to final arm64: cpufeature: reorder cpus_have_{const, final}_cap() KVM: arm64: Factor out is_{vhe,nvhe}_hyp_code() KVM: arm64: Force PTE mapping on fault resulting in a device mapping KVM: arm64: Use fallback mapping sizes for contiguous huge page sizes KVM: arm64: Fix masks in stage2_pte_cacheable() KVM: arm64: Fix AArch32 handling of DBGD{CCINT,SCRext} and DBGVCR KVM: arm64: Allocate stage-2 pgd pages with GFP_KERNEL_ACCOUNT KVM: arm64: Drop useless PAN setting on host EL1 to EL2 transition KVM: arm64: Remove leftover kern_hyp_va() in nVHE TLB invalidation KVM: arm64: Don't corrupt tpidr_el2 on failed HVC call x86/kvm: Reserve KVM_FEATURE_MSI_EXT_DEST_ID
-
Linus Walleij authored
The driver includes <linux/gpio.h> but doesn't use any symbols from this file. Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: linux-renesas-soc@vger.kernel.org Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> # on r8a77440/armadillo, where this is the last piece of non-DT support. Signed-off-by:
-
- 31 Oct, 2020 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull vhost fixes from Michael Tsirkin: "Fixes all over the place. A new UAPI is borderline: can also be considered a new feature but also seems to be the only way we could come up with to fix addressing for userspace - and it seems important to switch to it now before userspace making assumptions about addressing ability of devices is set in stone" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vdpasim: allow to assign a MAC address vdpasim: fix MAC address configuration vdpa: handle irq bypass register failure case vdpa_sim: Fix DMA mask Revert "vhost-vdpa: fix page pinning leakage in error path" vdpa/mlx5: Fix error return in map_direct_mr() vhost_vdpa: Return -EFAULT if copy_from_user() fails vdpa_sim: implement get_iova_range() vhost: vdpa: report iova range vdpa: introduce config op to get valid iova range
-
