- 01 Oct, 2020 40 commits
-
-
Sonny Sasaka authored
[ Upstream commit adf1d692 ] After sending Inquiry Cancel command to the controller, it is possible that Inquiry Complete event comes before Inquiry Cancel command complete event. In this case the Inquiry Cancel command will have status of Command Disallowed since there is no Inquiry session to be cancelled. This case should not be treated as error, otherwise we can reach an inconsistent state. Example of a btmon trace when this happened: < HCI Command: Inquiry Cancel (0x01|0x0002) plen 0 > HCI Event: Inquiry Complete (0x01) plen 1 Status: Success (0x00) > HCI Event: Command Complete (0x0e) plen 4 Inquiry Cancel (0x01|0x0002) ncmd 1 Status: Command Disallowed (0x0c) Signed-off-by:
Sonny Sasaka <sonnysasaka@chromium.org> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jonathan Bakker authored
[ Upstream commit 05942b8c ] The USB phy takes some time to reset, so make sure we give it to it. The delay length was taken from the 4x12 phy driver. This manifested in issues with the DWC2 driver since commit fe369e18 ("usb: dwc2: Make dwc2_readl/writel functions endianness-agnostic.") where the endianness check would read the DWC ID as 0 due to the phy still resetting, resulting in the wrong endian mode being chosen. Signed-off-by:
Jonathan Bakker <xc-racer2@live.ca> Link: https://lore.kernel.org/r/BN6PR04MB06605D52502816E500683553A3D10@BN6PR04MB0660.namprd04.prod.outlook.comSigned-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
-
Cong Wang authored
[ Upstream commit 8d9f73c0 ] In lec_arp_clear_vccs() only entry->vcc is freed, but vcc could be installed on entry->recv_vcc too in lec_vcc_added(). This fixes the following memory leak: unreferenced object 0xffff8880d9266b90 (size 16): comm "atm2", pid 425, jiffies 4294907980 (age 23.488s) hex dump (first 16 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 6b 6b 6b a5 ............kkk. backtrace: [<(____ptrval____)>] kmem_cache_alloc_trace+0x10e/0x151 [<(____ptrval____)>] lane_ioctl+0x4b3/0x569 [<(____ptrval____)>] do_vcc_ioctl+0x1ea/0x236 [<(____ptrval____)>] svc_ioctl+0x17d/0x198 [<(____ptrval____)>] sock_do_ioctl+0x47/0x12f [<(____ptrval____)>] sock_ioctl+0x2f9/0x322 [<(____ptrval____)>] vfs_ioctl+0x1e/0x2b [<(____ptrval____)>] ksys_ioctl+0x61/0x80 [<(____ptrval____)>] __x64_sys_ioctl+0x16/0x19 [<(____ptrval____)>] do_syscall_64+0x57/0x65 [<(____ptrval____)>] entry_SYSCALL_64_after_hwframe+0x49/0xb3 Cc: Gengming Liu <l.dmxcsnsbh@gmail.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Krzysztof Kozlowski authored
[ Upstream commit 8c149b7d ] The required supplies in bindings were actually not matching implementation making the bindings incorrect and misleading. The Linux kernel driver requires all supplies to be present. Also for wlf,wm8994 uses just DBVDD-supply instead of DBVDDn-supply (n: <1,3>). Reported-by:
Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200501133534.6706-1-krzk@kernel.orgSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Madhuparna Bhowmik authored
[ Upstream commit 44b8fb6e ] After registering character device the file operation callbacks can be called. The open callback registers interrupt handler. Therefore interrupt handler can execute in parallel with rest of the init function. To avoid such data race initialize telclk_interrupt variable and struct alarm_events before registering character device. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Link: https://lore.kernel.org/r/20200417153451.1551-1-madhuparnabhowmik10@gmail.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Douglas Anderson authored
[ Upstream commit b849dd84 ] While trying to "dd" to the block device for a USB stick, I encountered a hung task warning (blocked for > 120 seconds). I managed to come up with an easy way to reproduce this on my system (where /dev/sdb is the block device for my USB stick) with: while true; do dd if=/dev/zero of=/dev/sdb bs=4M; done With my reproduction here are the relevant bits from the hung task detector: INFO: task udevd:294 blocked for more than 122 seconds. ... udevd D 0 294 1 0x00400008 Call trace: ... mutex_lock_nested+0x40/0x50 __blkdev_get+0x7c/0x3d4 blkdev_get+0x118/0x138 blkdev_open+0x94/0xa8 do_dentry_open+0x268/0x3a0 vfs_open+0x34/0x40 path_openat+0x39c/0xdf4 do_filp_open+0x90/0x10c do_sys_open+0x150/0x3c8 ... ... Showing all locks held in the system: ... 1 lock held by dd/2798: #0: ffffff814ac1a3b8 (&bdev->bd_mutex){+.+.}, at: __blkdev_put+0x50/0x204 ... dd D 0 2798 2764 0x00400208 Call trace: ... schedule+0x8c/0xbc io_schedule+0x1c/0x40 wait_on_page_bit_common+0x238/0x338 __lock_page+0x5c/0x68 write_cache_pages+0x194/0x500 generic_writepages+0x64/0xa4 blkdev_writepages+0x24/0x30 do_writepages+0x48/0xa8 __filemap_fdatawrite_range+0xac/0xd8 filemap_write_and_wait+0x30/0x84 __blkdev_put+0x88/0x204 blkdev_put+0xc4/0xe4 blkdev_close+0x28/0x38 __fput+0xe0/0x238 ____fput+0x1c/0x28 task_work_run+0xb0/0xe4 do_notify_resume+0xfc0/0x14bc work_pending+0x8/0x14 The problem appears related to the fact that my USB disk is terribly slow and that I have a lot of RAM in my system to cache things. Specifically my writes seem to be happening at ~15 MB/s and I've got ~4 GB of RAM in my system that can be used for buffering. To write 4 GB of buffer to disk thus takes ~4000 MB / ~15 MB/s = ~267 seconds. The 267 second number is a problem because in __blkdev_put() we call sync_blockdev() while holding the bd_mutex. Any other callers who want the bd_mutex will be blocked for the whole time. The problem is made worse because I believe blkdev_put() specifically tells other tasks (namely udev) to go try to access the device at right around the same time we're going to hold the mutex for a long time. Putting some traces around this (after disabling the hung task detector), I could confirm: dd: 437.608600: __blkdev_put() right before sync_blockdev() for sdb udevd: 437.623901: blkdev_open() right before blkdev_get() for sdb dd: 661.468451: __blkdev_put() right after sync_blockdev() for sdb udevd: 663.820426: blkdev_open() right after blkdev_get() for sdb A simple fix for this is to realize that sync_blockdev() works fine if you're not holding the mutex. Also, it's not the end of the world if you sync a little early (though it can have performance impacts). Thus we can make a guess that we're going to need to do the sync and then do it without holding the mutex. We still do one last sync with the mutex but it should be much, much faster. With this, my hung task warnings for my test case are gone. Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Guenter Roeck <groeck@chromium.org> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Steve Rutherford authored
[ Upstream commit 7289fdb5 ] Fixes a NULL pointer dereference, caused by the PIT firing an interrupt before the interrupt table has been initialized. SET_PIT2 can race with the creation of the IRQchip. In particular, if SET_PIT2 is called with a low PIT timer period (after the creation of the IOAPIC, but before the instantiation of the irq routes), the PIT can fire an interrupt at an uninitialized table. Signed-off-by:
Steve Rutherford <srutherford@google.com> Signed-off-by:
Jon Cargille <jcargill@google.com> Reviewed-by:
Jim Mattson <jmattson@google.com> Message-Id: <20200416191152.259434-1-jcargill@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Jaewon Kim authored
[ Upstream commit 09ef5283 ] On passing requirement to vm_unmapped_area, arch_get_unmapped_area and arch_get_unmapped_area_topdown did not set align_offset. Internally on both unmapped_area and unmapped_area_topdown, if info->align_mask is 0, then info->align_offset was meaningless. But commit df529cab ("mm: mmap: add trace point of vm_unmapped_area") always prints info->align_offset even though it is uninitialized. Fix this uninitialized value issue by setting it to 0 explicitly. Before: vm_unmapped_area: addr=0x755b155000 err=0 total_vm=0x15aaf0 flags=0x1 len=0x109000 lo=0x8000 hi=0x75eed48000 mask=0x0 ofs=0x4022 After: vm_unmapped_area: addr=0x74a4ca1000 err=0 total_vm=0x168ab1 flags=0x1 len=0x9000 lo=0x8000 hi=0x753d94b000 mask=0x0 ofs=0x0 Signed-off-by:
Jaewon Kim <jaewon31.kim@samsung.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Reviewed-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Xianting Tian authored
[ Upstream commit faffdfa0 ] Mount failure issue happens under the scenario: Application forked dozens of threads to mount the same number of cramfs images separately in docker, but several mounts failed with high probability. Mount failed due to the checking result of the page(read from the superblock of loop dev) is not uptodate after wait_on_page_locked(page) returned in function cramfs_read: wait_on_page_locked(page); if (!PageUptodate(page)) { ... } The reason of the checking result of the page not uptodate: systemd-udevd read the loopX dev before mount, because the status of loopX is Lo_unbound at this time, so loop_make_request directly trigger the calling of io_end handler end_buffer_async_read, which called SetPageError(page). So It caused the page can't be set to uptodate in function end_buffer_async_read: if(page_uptodate && !PageError(page)) { SetPageUptodate(page); } Then mount operation is performed, it used the same page which is just accessed by systemd-udevd above, Because this page is not uptodate, it will launch a actual read via submit_bh, then wait on this page by calling wait_on_page_locked(page). When the I/O of the page done, io_end handler end_buffer_async_read is called, because no one cleared the page error(during the whole read path of mount), which is caused by systemd-udevd reading, so this page is still in "PageError" status, which can't be set to uptodate in function end_buffer_async_read, then caused mount failure. But sometimes mount succeed even through systemd-udeved read loopX dev just before, The reason is systemd-udevd launched other loopX read just between step 3.1 and 3.2, the steps as below: 1, loopX dev default status is Lo_unbound; 2, systemd-udved read loopX dev (page is set to PageError); 3, mount operation 1) set loopX status to Lo_bound; ==>systemd-udevd read loopX dev<== 2) read loopX dev(page has no error) 3) mount succeed As the loopX dev status is set to Lo_bound after step 3.1, so the other loopX dev read by systemd-udevd will go through the whole I/O stack, part of the call trace as below: SYS_read vfs_read do_sync_read blkdev_aio_read generic_file_aio_read do_generic_file_read: ClearPageError(page); mapping->a_ops->readpage(filp, page); here, mapping->a_ops->readpage() is blkdev_readpage. In latest kernel, some function name changed, the call trace as below: blkdev_read_iter generic_file_read_iter generic_file_buffered_read: /* * A previous I/O error may have been due to temporary * failures, eg. mutipath errors. * Pg_error will be set again if readpage fails. */ ClearPageError(page); /* Start the actual read. The read will unlock the page*/ error=mapping->a_ops->readpage(flip, page); We can see ClearPageError(page) is called before the actual read, then the read in step 3.2 succeed. This patch is to add the calling of ClearPageError just before the actual read of read path of cramfs mount. Without the patch, the call trace as below when performing cramfs mount: do_mount cramfs_read cramfs_blkdev_read read_cache_page do_read_cache_page: filler(data, page); or mapping->a_ops->readpage(data, page); With the patch, the call trace as below when performing mount: do_mount cramfs_read cramfs_blkdev_read read_cache_page: do_read_cache_page: ClearPageError(page); <== new add filler(data, page); or mapping->a_ops->readpage(data, page); With the patch, mount operation trigger the calling of ClearPageError(page) before the actual read, the page has no error if no additional page error happen when I/O done. Signed-off-by:
Xianting Tian <xianting_tian@126.com> Signed-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Jan Kara <jack@suse.cz> Cc: <yubin@h3c.com> Link: http://lkml.kernel.org/r/1583318844-22971-1-git-send-email-xianting_tian@126.comSigned-off-by:
-
Andreas Steinmetz authored
[ Upstream commit 5c6cd702 ] The Miditech MIDIFACE 16x16 (USB ID 1290:1749) has more than one extra endpoint descriptor. The first extra descriptor is: 0x06 0x30 0x00 0x00 0x00 0x00 As the code in snd_usbmidi_get_ms_info() looks only at the first extra descriptor to find USB_DT_CS_ENDPOINT the device as such is recognized but there is neither input nor output configured. The patch iterates through the extra descriptors to find the proper one. With this patch the device is correctly configured. Signed-off-by:
Andreas Steinmetz <ast@domdv.de> Link: https://lore.kernel.org/r/1c3b431a86f69e1d60745b6110cdb93c299f120b.camel@domdv.deSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Liu Song authored
[ Upstream commit acc5af3e ] In “ubifs_check_node”, when the value of "node_len" is abnormal, the code will goto label of "out_len" for execution. Then, in the following "ubifs_dump_node", if inode type is "UBIFS_DATA_NODE", in "print_hex_dump", an out-of-bounds access may occur due to the wrong "ch->len". Therefore, when the value of "node_len" is abnormal, data length should to be adjusted to a reasonable safe range. At this time, structured data is not credible, so dump the corrupted data directly for analysis. Signed-off-by:
Liu Song <liu.song11@zte.com.cn> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Chuck Lever authored
[ Upstream commit 1a33d8a2 ] Kernel memory leak detected: unreferenced object 0xffff888849cdf480 (size 8): comm "kworker/u8:3", pid 2086, jiffies 4297898756 (age 4269.856s) hex dump (first 8 bytes): 30 00 cd 49 88 88 ff ff 0..I.... backtrace: [<00000000acfc370b>] __kmalloc_track_caller+0x137/0x183 [<00000000a2724354>] kstrdup+0x2b/0x43 [<0000000082964f84>] xprt_rdma_format_addresses+0x114/0x17d [rpcrdma] [<00000000dfa6ed00>] xprt_setup_rdma_bc+0xc0/0x10c [rpcrdma] [<0000000073051a83>] xprt_create_transport+0x3f/0x1a0 [sunrpc] [<0000000053531a8e>] rpc_create+0x118/0x1cd [sunrpc] [<000000003a51b5f8>] setup_callback_client+0x1a5/0x27d [nfsd] [<000000001bd410af>] nfsd4_process_cb_update.isra.7+0x16c/0x1ac [nfsd] [<000000007f4bbd56>] nfsd4_run_cb_work+0x4c/0xbd [nfsd] [<0000000055c5586b>] process_one_work+0x1b2/0x2fe [<00000000b1e3e8ef>] worker_thread+0x1a6/0x25a [<000000005205fb78>] kthread+0xf6/0xfb [<000000006d2dc057>] ret_from_fork+0x3a/0x50 Introduce a call to xprt_rdma_free_addresses() similar to the way that the TCP backchannel releases a transport's peer address strings. Fixes: 5d252f90 ("svcrdma: Add class for RDMA backwards direction transport") Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit b25b60d7 ] 'maxlen' is the total size of the destination buffer. There is only one caller and this value is 256. When we compute the size already used and what we would like to add in the buffer, the trailling NULL character is not taken into account. However, this trailling character will be added by the 'strcat' once we have checked that we have enough place. So, there is a off-by-one issue and 1 byte of the stack could be erroneously overwridden. Take into account the trailling NULL, when checking if there is enough place in the destination buffer. While at it, also replace a 'sprintf' by a safer 'snprintf', check for output truncation and avoid a superfluous 'strlen'. Fixes: dc9a16e4 ("svc: Add /proc/sys/sunrpc/transport files") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> [ cel: very minor fix to documenting comment Signed-off-by:
-
Gabriel Ravier authored
[ Upstream commit d1ee7e1f ] If '-o' was used more than 64 times in a single invocation of gpio-hammer, this could lead to an overflow of the 'lines' array. This commit fixes this by avoiding the overflow and giving a proper diagnostic back to the user Signed-off-by:
Gabriel Ravier <gabravier@gmail.com> Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
-
Pratik Rajesh Sampat authored
[ Upstream commit d95fe371 ] The patch avoids allocating cpufreq_policy on stack hence fixing frame size overflow in 'powernv_cpufreq_work_fn' Fixes: 22794280 ("cpufreq: powernv: Restore cpu frequency to policy->cur on unthrottling") Signed-off-by:
Pratik Rajesh Sampat <psampat@linux.ibm.com> Reviewed-by:
Daniel Axtens <dja@axtens.net> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200316135743.57735-1-psampat@linux.ibm.comSigned-off-by:
-
Vignesh Raghavendra authored
[ Upstream commit 7cf4df30 ] Terminate and flush DMA internal buffers, before pushing RX data to higher layer. Otherwise, this will lead to data corruption, as driver would end up pushing stale buffer data to higher layer while actual data is still stuck inside DMA hardware and has yet not arrived at the memory. While at that, replace deprecated dmaengine_terminate_all() with dmaengine_terminate_async(). Signed-off-by:
Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20200319110344.21348-2-vigneshr@ti.comSigned-off-by:
-
Peter Ujfalusi authored
[ Upstream commit 4ce35a36 ] When booting j721e the following bug is printed: [ 1.154821] BUG: sleeping function called from invalid context at kernel/sched/completion.c:99 [ 1.154827] in_atomic(): 0, irqs_disabled(): 128, non_block: 0, pid: 12, name: kworker/0:1 [ 1.154832] 3 locks held by kworker/0:1/12: [ 1.154836] #0: ffff000840030728 ((wq_completion)events){+.+.}, at: process_one_work+0x1d4/0x6e8 [ 1.154852] #1: ffff80001214fdd8 (deferred_probe_work){+.+.}, at: process_one_work+0x1d4/0x6e8 [ 1.154860] #2: ffff00084060b170 (&dev->mutex){....}, at: __device_attach+0x38/0x138 [ 1.154872] irq event stamp: 63096 [ 1.154881] hardirqs last enabled at (63095): [<ffff800010b74318>] _raw_spin_unlock_irqrestore+0x70/0x78 [ 1.154887] hardirqs last disabled at (63096): [<ffff800010b740d8>] _raw_spin_lock_irqsave+0x28/0x80 [ 1.154893] softirqs last enabled at (62254): [<ffff800010080c88>] _stext+0x488/0x564 [ 1.154899] softirqs last disabled at (62247): [<ffff8000100fdb3c>] irq_exit+0x114/0x140 [ 1.154906] CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.6.0-rc6-next-20200318-00094-g45e4089b0bd3 #221 [ 1.154911] Hardware name: Texas Instruments K3 J721E SoC (DT) [ 1.154917] Workqueue: events deferred_probe_work_func [ 1.154923] Call trace: [ 1.154928] dump_backtrace+0x0/0x190 [ 1.154933] show_stack+0x14/0x20 [ 1.154940] dump_stack+0xe0/0x148 [ 1.154946] ___might_sleep+0x150/0x1f0 [ 1.154952] __might_sleep+0x4c/0x80 [ 1.154957] wait_for_completion_timeout+0x40/0x140 [ 1.154964] ti_sci_set_device_state+0xa0/0x158 [ 1.154969] ti_sci_cmd_get_device_exclusive+0x14/0x20 [ 1.154977] ti_sci_dev_start+0x34/0x50 [ 1.154984] genpd_runtime_resume+0x78/0x1f8 [ 1.154991] __rpm_callback+0x3c/0x140 [ 1.154996] rpm_callback+0x20/0x80 [ 1.155001] rpm_resume+0x568/0x758 [ 1.155007] __pm_runtime_resume+0x44/0xb0 [ 1.155013] omap8250_probe+0x2b4/0x508 [ 1.155019] platform_drv_probe+0x50/0xa0 [ 1.155023] really_probe+0xd4/0x318 [ 1.155028] driver_probe_device+0x54/0xe8 [ 1.155033] __device_attach_driver+0x80/0xb8 [ 1.155039] bus_for_each_drv+0x74/0xc0 [ 1.155044] __device_attach+0xdc/0x138 [ 1.155049] device_initial_probe+0x10/0x18 [ 1.155053] bus_probe_device+0x98/0xa0 [ 1.155058] deferred_probe_work_func+0x74/0xb0 [ 1.155063] process_one_work+0x280/0x6e8 [ 1.155068] worker_thread+0x48/0x430 [ 1.155073] kthread+0x108/0x138 [ 1.155079] ret_from_fork+0x10/0x18 To fix the bug we need to first call pm_runtime_enable() prior to any pm_runtime calls. Reported-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200320125200.6772-1-peter.ujfalusi@ti.comSigned-off-by:
-
Vignesh Raghavendra authored
[ Upstream commit f19c3f6c ] When port's throttle callback is called, it should stop pushing any more data into TTY buffer to avoid buffer overflow. This means driver has to stop HW from receiving more data and assert the HW flow control. For UARTs with auto HW flow control (such as 8250_omap) manual assertion of flow control line is not possible and only way is to allow RX FIFO to fill up, thus trigger auto HW flow control logic. Therefore make sure that 8250 generic IRQ handler does not drain data when port is stopped (i.e UART_LSR_DR is unset in read_status_mask). Not servicing, RX FIFO would trigger auto HW flow control when FIFO occupancy reaches preset threshold, thus halting RX. Since, error conditions in UART_LSR register are cleared just by reading the register, data has to be drained in case there are FIFO errors, else error information will lost. Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit bf2cbe04 ] Clang warns: ../kernel/trace/trace.c:9335:33: warning: array comparison always evaluates to true [-Wtautological-compare] if (__stop___trace_bprintk_fmt != __start___trace_bprintk_fmt) ^ 1 warning generated. These are not true arrays, they are linker defined symbols, which are just addresses. Using the address of operator silences the warning and does not change the runtime result of the check (tested with some print statements compiled in with clang + ld.lld and gcc + ld.bfd in QEMU). Link: http://lkml.kernel.org/r/20200220051011.26113-1-natechancellor@gmail.com Link: https://github.com/ClangBuiltLinux/linux/issues/893Suggested-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Stefan Berger authored
[ Upstream commit d8d74ea3 ] Synchronize with the results from the CRQs before continuing with the initialization. This avoids trying to send TPM commands while the rtce buffer has not been allocated, yet. This patch fixes an existing race condition that may occurr if the hypervisor does not quickly respond to the VTPM_GET_RTCE_BUFFER_SIZE request sent during initialization and therefore the ibmvtpm->rtce_buf has not been allocated at the time the first TPM command is sent. Fixes: 132f7629 ("drivers/char/tpm: Add new device driver to support IBM vTPM") Signed-off-by:
Stefan Berger <stefanb@linux.ibm.com> Acked-by:
Nayna Jain <nayna@linux.ibm.com> Tested-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
-
Darrick J. Wong authored
[ Upstream commit 1cb5deb5 ] If we decide that a directory free block is corrupt, we must take care not to leak a buffer pointer to the caller. After xfs_trans_brelse returns, the buffer can be freed or reused, which means that we have to set *bpp back to NULL. Callers are supposed to notice the nonzero return value and not use the buffer pointer, but we should code more defensively, even if all current callers handle this situation correctly. Fixes: de14c5f5 ("xfs: verify free block header fields") Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit a7463e2d ] The shifting of buf[3] by 24 bits to the left will be promoted to a 32 bit signed int and then sign-extended to an unsigned long. In the unlikely event that the the top bit of buf[3] is set then all then all the upper bits end up as also being set because of the sign-extension and this affect the ev->post_bit_error sum. Fix this by using the temporary u32 variable bit_error to avoid the sign-extension promotion. This also removes the need to do the computation twice. Addresses-Coverity: ("Unintended sign extension") Fixes: 267897a4 ("[media] tda10071: implement DVBv5 statistics") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by:
-
Howard Chung authored
[ Upstream commit 96298f64 ] According to Core Spec Version 5.2 | Vol 3, Part A 6.1.5, the incoming L2CAP_ConfigReq should be handled during OPEN state. The section below shows the btmon trace when running L2CAP/COS/CFD/BV-12-C before and after this change. === Before === ... > ACL Data RX: Handle 256 flags 0x02 dlen 12 #22 L2CAP: Connection Request (0x02) ident 2 len 4 PSM: 1 (0x0001) Source CID: 65 < ACL Data TX: Handle 256 flags 0x00 dlen 16 #23 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 12 #24 L2CAP: Configure Request (0x04) ident 2 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 #25 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 #26 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 16 #27 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 .. < ACL Data TX: Handle 256 flags 0x00 dlen 18 #28 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 > HCI Event: Number of Completed Packets (0x13) plen 5 #29 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 14 #30 L2CAP: Configure Response (0x05) ident 2 len 6 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 20 #31 L2CAP: Configure Request (0x04) ident 3 len 12 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 91 02 11 11 ...... < ACL Data TX: Handle 256 flags 0x00 dlen 14 #32 L2CAP: Command Reject (0x01) ident 3 len 6 Reason: Invalid CID in request (0x0002) Destination CID: 64 Source CID: 65 > HCI Event: Number of Completed Packets (0x13) plen 5 #33 Num handles: 1 Handle: 256 Count: 1 ... === After === ... > ACL Data RX: Handle 256 flags 0x02 dlen 12 #22 L2CAP: Connection Request (0x02) ident 2 len 4 PSM: 1 (0x0001) Source CID: 65 < ACL Data TX: Handle 256 flags 0x00 dlen 16 #23 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 12 #24 L2CAP: Configure Request (0x04) ident 2 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 #25 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 #26 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 16 #27 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 .. < ACL Data TX: Handle 256 flags 0x00 dlen 18 #28 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 > HCI Event: Number of Completed Packets (0x13) plen 5 #29 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 14 #30 L2CAP: Configure Response (0x05) ident 2 len 6 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 20 #31 L2CAP: Configure Request (0x04) ident 3 len 12 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 91 02 11 11 ..... < ACL Data TX: Handle 256 flags 0x00 dlen 18 #32 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 < ACL Data TX: Handle 256 flags 0x00 dlen 12 #33 L2CAP: Configure Request (0x04) ident 3 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 #34 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 #35 Num handles: 1 Handle: 256 Count: 1 ... Signed-off-by:
Howard Chung <howardchung@google.com> Signed-off-by:
-
John Clements authored
[ Upstream commit 1b3460a8 ] mitigates race condition on BACO reset between GPU bootcode and driver reload Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
John Clements <john.clements@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Wen Yang authored
[ Upstream commit 4cbbc3a0 ] While unlikely the divisor in scale64_check_overflow() could be >= 32bit in scale64_check_overflow(). do_div() truncates the divisor to 32bit at least on 32bit platforms. Use div64_u64() instead to avoid the truncation to 32-bit. [ tglx: Massaged changelog ] Signed-off-by:
Wen Yang <wenyang@linux.alibaba.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200120100523.45656-1-wenyang@linux.alibaba.comSigned-off-by:
-
Alain Michaud authored
[ Upstream commit 08bb4da9 ] Some controllers have been observed to send zero'd events under some conditions. This change guards against this condition as well as adding a trace to facilitate diagnosability of this condition. Signed-off-by:
Alain Michaud <alainm@chromium.org> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit a3ea410c ] Josef reported that his old-and-good Plextor ConvertX M402U video converter spews lots of WARNINGs on the recent kernels, and it turned out that the device uses a bulk endpoint for interrupt handling just like 2250 board. For fixing it, generalize the check with the proper verification of the endpoint instead of hard-coded board type check. Fixes: 7e5219d1 ("[media] go7007: Fix 2250 urb type") Reported-and-tested-by:
Josef Möllers <josef.moellers@suse.com> BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1162583 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206427Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Dmitry Osipenko authored
[ Upstream commit 8e84172e ] It's incorrect to check the channel's "busy" state without taking a lock. That shouldn't cause any real troubles, nevertheless it's always better not to have any race conditions in the code. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Acked-by:
Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20200209163356.6439-5-digetx@gmail.comSigned-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Thomas Gleixner authored
[ Upstream commit 8a37963c ] If an element is freed via RCU then recursion into BPF instrumentation functions is not a concern. The element is already detached from the map and the RCU callback does not hold any locks on which a kprobe, perf event or tracepoint attached BPF program could deadlock. Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200224145643.259118710@linutronix.deSigned-off-by:
-
Dave Hansen authored
[ Upstream commit 16171bff ] Alex Shi reported the pkey macros above arch_set_user_pkey_access() to be unused. They are unused, and even refer to a nonexistent CONFIG option. But, they might have served a good use, which was to ensure that the code does not try to set values that would not fit in the PKRU register. As it stands, a too-large 'pkey' value would be likely to silently overflow the u32 new_pkru_bits. Add a check to look for overflows. Also add a comment to remind any future developer to closely examine the types used to store pkey values if arch_max_pkey() ever changes. This boots and passes the x86 pkey selftests. Reported-by:
Alex Shi <alex.shi@linux.alibaba.com> Signed-off-by:
Dave Hansen <dave.hansen@intel.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200122165346.AD4DA150@viggo.jf.intel.comSigned-off-by:
-
Paolo Bonzini authored
[ Upstream commit 147f1a1f ] The "u" field in the event has three states, -1/0/1. Using u8 however means that comparison with -1 will always fail, so change to signed char. Signed-off-by:
-
Bart Van Assche authored
[ Upstream commit fb3063d3 ] From the comment above the definition of the roundup_pow_of_two() macro: The result is undefined when n == 0. Hence only pass positive values to roundup_pow_of_two(). This patch fixes the following UBSAN complaint: UBSAN: Undefined behaviour in ./include/linux/log2.h:57:13 shift exponent 64 is too large for 64-bit type 'long unsigned int' Call Trace: dump_stack+0xa5/0xe6 ubsan_epilogue+0x9/0x26 __ubsan_handle_shift_out_of_bounds.cold+0x4c/0xf9 rxe_qp_from_attr.cold+0x37/0x5d [rdma_rxe] rxe_modify_qp+0x59/0x70 [rdma_rxe] _ib_modify_qp+0x5aa/0x7c0 [ib_core] ib_modify_qp+0x3b/0x50 [ib_core] cma_modify_qp_rtr+0x234/0x260 [rdma_cm] __rdma_accept+0x1a7/0x650 [rdma_cm] nvmet_rdma_cm_handler+0x1286/0x14cd [nvmet_rdma] cma_cm_event_handler+0x6b/0x330 [rdma_cm] cma_ib_req_handler+0xe60/0x22d0 [rdma_cm] cm_process_work+0x30/0x140 [ib_cm] cm_req_handler+0x11f4/0x1cd0 [ib_cm] cm_work_handler+0xb8/0x344e [ib_cm] process_one_work+0x569/0xb60 worker_thread+0x7a/0x5d0 kthread+0x1e6/0x210 ret_from_fork+0x24/0x30 Link: https://lore.kernel.org/r/20200217205714.26937-1-bvanassche@acm.org Fixes: 8700e3e7 ("Soft RoCE driver") Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Wen Yang authored
[ Upstream commit 47340e46 ] The call to of_find_matching_node returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c:212:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 209, but without a corresponding object release within this function. drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c:237:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 209, but without a corresponding object release within this function. Signed-off-by:
Wen Yang <wen.yang99@zte.com.cn> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sebastian Reichel <sebastian.reichel@collabora.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Cc: Markus Elfring <Markus.Elfring@web.de> Signed-off-by:
-
James Smart authored
[ Upstream commit 4cb9e1dd ] Coverity reported a memory corruption error for the fdmi attributes routines: CID 15768 [Memory Corruption] Out-of-bounds access on FDMI Sloppy coding of the fmdi structures. In both the lpfc_fdmi_attr_def and lpfc_fdmi_reg_port_list structures, a field was placed at the start of payload that may have variable content. The field was given an arbitrary type (uint32_t). The code then uses the field name to derive an address, which it used in things such as memset and memcpy. The memset sizes or memcpy lengths were larger than the arbitrary type, thus coverity reported an error. Fix by replacing the arbitrary fields with the real field structures describing the payload. Link: https://lore.kernel.org/r/20200128002312.16346-8-jsmart2021@gmail.comSigned-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
James Smart authored
[ Upstream commit 39c4f1a9 ] The driver is occasionally seeing the following SLI Port error, requiring reset and reinit: Port Status Event: ... error 1=0x52004a01, error 2=0x218 The failure means an RQ timeout. That is, the adapter had received asynchronous receive frames, ran out of buffer slots to place the frames, and the driver did not replenish the buffer slots before a timeout occurred. The driver should not be so slow in replenishing buffers that a timeout can occur. When the driver received all the frames of a sequence, it allocates an IOCB to put the frames in. In a situation where there was no IOCB available for the frame of a sequence, the RQ buffer corresponding to the first frame of the sequence was not returned to the FW. Eventually, with enough traffic encountering the situation, the timeout occurred. Fix by releasing the buffer back to firmware whenever there is no IOCB for the first frame. [mkp: typo] Link: https://lore.kernel.org/r/20200128002312.16346-2-jsmart2021@gmail.comSigned-off-by:
-
Vasily Averin authored
[ Upstream commit 8d269a8e ] If seq_file .next function does not change position index, read after some lseek can generate unexpected output. $ dd if=/sys/fs/selinux/avc/cache_stats # usual output lookups hits misses allocations reclaims frees 817223 810034 7189 7189 6992 7037 1934894 1926896 7998 7998 7632 7683 1322812 1317176 5636 5636 5456 5507 1560571 1551548 9023 9023 9056 9115 0+1 records in 0+1 records out 189 bytes copied, 5,1564e-05 s, 3,7 MB/s $# read after lseek to midle of last line $ dd if=/sys/fs/selinux/avc/cache_stats bs=180 skip=1 dd: /sys/fs/selinux/avc/cache_stats: cannot skip to specified offset 056 9115 <<<< end of last line 1560571 1551548 9023 9023 9056 9115 <<< whole last line once again 0+1 records in 0+1 records out 45 bytes copied, 8,7221e-05 s, 516 kB/s $# read after lseek beyond end of of file $ dd if=/sys/fs/selinux/avc/cache_stats bs=1000 skip=1 dd: /sys/fs/selinux/avc/cache_stats: cannot skip to specified offset 1560571 1551548 9023 9023 9056 9115 <<<< generates whole last line 0+1 records in 0+1 records out 36 bytes copied, 9,0934e-05 s, 396 kB/s https://bugzilla.kernel.org/show_bug.cgi?id=206283Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Acked-by:
Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Steve Grubb authored
[ Upstream commit 70b3eeed ] Common Criteria calls out for any action that modifies the audit trail to be recorded. That usually is interpreted to mean insertion or removal of rules. It is not required to log modification of the inode information since the watch is still in effect. Additionally, if the rule is a never rule and the underlying file is one they do not want events for, they get an event for this bookkeeping update against their wishes. Since no device/inode info is logged at insertion and no device/inode information is logged on update, there is nothing meaningful being communicated to the admin by the CONFIG_CHANGE updated_rules event. One can assume that the rule was not "modified" because it is still watching the intended target. If the device or inode cannot be resolved, then audit_panic is called which is sufficient. The correct resolution is to drop logging config_update events since the watch is still in effect but just on another unknown inode. Signed-off-by:
Steve Grubb <sgrubb@redhat.com> Signed-off-by:
-
Qian Cai authored
[ Upstream commit 86b18aaa ] sk_buff.qlen can be accessed concurrently as noticed by KCSAN, BUG: KCSAN: data-race in __skb_try_recv_from_queue / unix_dgram_sendmsg read to 0xffff8a1b1d8a81c0 of 4 bytes by task 5371 on cpu 96: unix_dgram_sendmsg+0x9a9/0xb70 include/linux/skbuff.h:1821 net/unix/af_unix.c:1761 ____sys_sendmsg+0x33e/0x370 ___sys_sendmsg+0xa6/0xf0 __sys_sendmsg+0x69/0xf0 __x64_sys_sendmsg+0x51/0x70 do_syscall_64+0x91/0xb47 entry_SYSCALL_64_after_hwframe+0x49/0xbe write to 0xffff8a1b1d8a81c0 of 4 bytes by task 1 on cpu 99: __skb_try_recv_from_queue+0x327/0x410 include/linux/skbuff.h:2029 __skb_try_recv_datagram+0xbe/0x220 unix_dgram_recvmsg+0xee/0x850 ____sys_recvmsg+0x1fb/0x210 ___sys_recvmsg+0xa2/0xf0 __sys_recvmsg+0x66/0xf0 __x64_sys_recvmsg+0x51/0x70 do_syscall_64+0x91/0xb47 entry_SYSCALL_64_after_hwframe+0x49/0xbe Since only the read is operating as lockless, it could introduce a logic bug in unix_recvq_full() due to the load tearing. Fix it by adding a lockless variant of skb_queue_len() and unix_recvq_full() where READ_ONCE() is on the read while WRITE_ONCE() is on the write similar to the commit d7d16a89 ("net: add skb_queue_empty_lockless()"). Signed-off-by:
Qian Cai <cai@lca.pw> Signed-off-by:
-
Mohan Kumar authored
[ Upstream commit 6d011d50 ] RIRB interrupt status getting cleared after the write pointer is read causes a race condition, where last response(s) into RIRB may remain unserviced by IRQ, eventually causing azx_rirb_get_response to fall back to polling mode. Clearing the RIRB interrupt status ahead of write pointer access ensures that this condition is avoided. Signed-off-by:
Mohan Kumar <mkumard@nvidia.com> Signed-off-by:
Viswanath L <viswanathl@nvidia.com> Link: https://lore.kernel.org/r/1580983853-351-1-git-send-email-viswanathl@nvidia.comSigned-off-by:
-
Zhuang Yanying authored
[ Upstream commit 7df003c8 ] We are testing Virtual Machine with KSM on v5.4-rc2 kernel, and found the zero_page refcount overflow. The cause of refcount overflow is increased in try_async_pf (get_user_page) without being decreased in mmu_set_spte() while handling ept violation. In kvm_release_pfn_clean(), only unreserved page will call put_page. However, zero page is reserved. So, as well as creating and destroy vm, the refcount of zero page will continue to increase until it overflows. step1: echo 10000 > /sys/kernel/pages_to_scan/pages_to_scan echo 1 > /sys/kernel/pages_to_scan/run echo 1 > /sys/kernel/pages_to_scan/use_zero_pages step2: just create several normal qemu kvm vms. And destroy it after 10s. Repeat this action all the time. After a long period of time, all domains hang because of the refcount of zero page overflow. Qemu print error log as follow: … error: kvm run failed Bad address EAX=00006cdc EBX=00000008 ECX=80202001 EDX=078bfbfd ESI=ffffffff EDI=00000000 EBP=00000008 ESP=00006cc4 EIP=000efd75 EFL=00010002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0 ES =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] CS =0008 00000000 ffffffff 00c09b00 DPL=0 CS32 [-RA] SS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] DS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] FS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] GS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy GDT= 000f7070 00000037 IDT= 000f70ae 00000000 CR0=00000011 CR2=00000000 CR3=00000000 CR4=00000000 DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000 DR6=00000000ffff0ff0 DR7=0000000000000400 EFER=0000000000000000 Code=00 01 00 00 00 e9 e8 00 00 00 c7 05 4c 55 0f 00 01 00 00 00 <8b> 35 00 00 01 00 8b 3d 04 00 01 00 b8 d8 d3 00 00 c1 e0 08 0c ea a3 00 00 01 00 c7 05 04 … Meanwhile, a kernel warning is departed. [40914.836375] WARNING: CPU: 3 PID: 82067 at ./include/linux/mm.h:987 try_get_page+0x1f/0x30 [40914.836412] CPU: 3 PID: 82067 Comm: CPU 0/KVM Kdump: loaded Tainted: G OE 5.2.0-rc2 #5 [40914.836415] RIP: 0010:try_get_page+0x1f/0x30 [40914.836417] Code: 40 00 c3 0f 1f 84 00 00 00 00 00 48 8b 47 08 a8 01 75 11 8b 47 34 85 c0 7e 10 f0 ff 47 34 b8 01 00 00 00 c3 48 8d 78 ff eb e9 <0f> 0b 31 c0 c3 66 90 66 2e 0f 1f 84 00 0 0 00 00 00 48 8b 47 08 a8 [40914.836418] RSP: 0018:ffffb4144e523988 EFLAGS: 00010286 [40914.836419] RAX: 0000000080000000 RBX: 0000000000000326 RCX: 0000000000000000 [40914.836420] RDX: 0000000000000000 RSI: 00004ffdeba10000 RDI: ffffdf07093f6440 [40914.836421] RBP: ffffdf07093f6440 R08: 800000424fd91225 R09: 0000000000000000 [40914.836421] R10: ffff9eb41bfeebb8 R11: 0000000000000000 R12: ffffdf06bbd1e8a8 [40914.836422] R13: 0000000000000080 R14: 800000424fd91225 R15: ffffdf07093f6440 [40914.836423] FS: 00007fb60ffff700(0000) GS:ffff9eb4802c0000(0000) knlGS:0000000000000000 [40914.836425] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [40914.836426] CR2: 0000000000000000 CR3: 0000002f220e6002 CR4: 00000000003626e0 [40914.836427] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [40914.836427] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [40914.836428] Call Trace: [40914.836433] follow_page_pte+0x302/0x47b [40914.836437] __get_user_pages+0xf1/0x7d0 [40914.836441] ? irq_work_queue+0x9/0x70 [40914.836443] get_user_pages_unlocked+0x13f/0x1e0 [40914.836469] __gfn_to_pfn_memslot+0x10e/0x400 [kvm] [40914.836486] try_async_pf+0x87/0x240 [kvm] [40914.836503] tdp_page_fault+0x139/0x270 [kvm] [40914.836523] kvm_mmu_page_fault+0x76/0x5e0 [kvm] [40914.836588] vcpu_enter_guest+0xb45/0x1570 [kvm] [40914.836632] kvm_arch_vcpu_ioctl_run+0x35d/0x580 [kvm] [40914.836645] kvm_vcpu_ioctl+0x26e/0x5d0 [kvm] [40914.836650] do_vfs_ioctl+0xa9/0x620 [40914.836653] ksys_ioctl+0x60/0x90 [40914.836654] __x64_sys_ioctl+0x16/0x20 [40914.836658] do_syscall_64+0x5b/0x180 [40914.836664] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [40914.836666] RIP: 0033:0x7fb61cb6bfc7 Signed-off-by:
LinFeng <linfeng23@huawei.com> Signed-off-by:
Zhuang Yanying <ann.zhuangyanying@huawei.com> Signed-off-by:
-
