This variable is never used in the driver. Just remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IsBoardRevA is not defined in the driver. Remove the comment
about it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Until it's determined if this workaround can be removed, block
out the code with an #if 0/#endif and remove the individual
comments on each line.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This variable is only used to count the number of dma buffers
allocated during the attach. If an allocation fails, the attach
function exits with -ENOMEM. When this variable is checked later
it will always be == 2. Just remove the variable and the check.

This allows bringing the code back an indent level in
s626_initialize(). Note, coding style issues in this function
are not addressed yet.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a simple dev_info() message after a successfull attach.
Change the final return to '0' to indicate success.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The private data is kzalloc'ed. All the variables in it are
initially '0'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

To make the attach a bit cleaner, factor the board init code
out of attach_pci() into a new function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Only set dev->irq if request_irq is successfull.

Remove the kernel message noise.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

To make the attach a bit cleaner, factor the dma buffer allocation
out of attach_pci() into a new function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

'devpriv->base_addr' is valid from this point on in the attach_pci()
function. Remove the unnecessary checks.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The local variable 'resourceStart' is only used in the ioremap()
to hold the PCI bar 0 base address. Just use the pci_resource_start()
directly in the ioremap().

Also, instead of assuming the resource size for the ioremap, use
pci_resource_len() to get the actual size.

Remove the kernel noise when the ioremap fails and change the error
code from -ENODEV to -ENOMEM.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This variable is only used as a flag to indicate that the pci device
has been enabled and needs to be disabled in the detach. Use the
comedi_device 'iobase' for this and remove the private data variable.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The 'result' variable is only used to check the return from
comedi_pci_enable(). Just reuse the 'ret' variable.

Also, remove the kernel noise and use the error code from
comedi_pci_enable() instead of returning -ENODEV.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Instead of the literal string "s626", use the dev->board_name for
the resource name when enabling the PCI device and requesting the
irq.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the hw_dev pointer in the comedi_device struct to hold the
pci_dev instead of carrying it in the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert this PCI driver to use the comedi PCI auto config attach
mechanism by adding an 'attach_pci' callback function. Since the
driver does not require any external configuration options, and
the legacy 'attach' callback is not optional, remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver only supports one board type. Move the used board info
out of the boardinfo struct and remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add subdevice 1 as an analog input (AI) subdevice.  It currently only
supports basic, software-triggered acquisitions.

This is mostly the work of Fred Brooks (MODULE_AUTHOR), but he based his
update on an older version of the driver.  I applied the relevant
changes with a few tweaks: adding an explicit `udelay(1)` in a timeout
loop, replacing binary constants with hex, renaming functions, replacing
`printk()` calls, removing exported symbols, removing (very) incomplete
comedi "command" support, and making some coding-style changes.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename `subdev_700_insn()` to `daq700_dio_insn_bits()` and
`subdev_700_insn_config()` to `daq700_dio_insn_config()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename a few functions and variables to use the prefix `daq700` instead
of the prefix or suffix `dio700`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes typedef for
_stCPacketClassificationRuleSI, changes the
name of the struct to bcm_packet_class_rules,
and updates the comments appropriately . In
addition, any calls to typedefs
"CCPacketClassificationRuleSI,
stCPacketClassificationRuleSI,
or *pstCPacketClassificationRuleSI" are changed
to call the struct directly.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes typedef for _stPhsRuleSI,
changes the name of the struct to
bcm_phs_rules, and updates the comments
appropriately. In addition, any
calls to typedefs "stPhsRuleSI,
*pstPhsRuleSI, or CPhsRuleSI" are
changed to call the struct directly.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes typedef for _stConvergenceSLTypes,
changes the name of the struct to
bcm_convergence_types, and updates the
comments appropriately. In addition, any
calls to typedefs "stConvergenceSLTypes,
CConvergenceSLTypes, and *pstConvergenceSLTypes"
are changed to call the struct directly.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes typedef for _stServiceFlowParamSI,
changes the name of the struct to
bcm_connect_mgr_params, and updates the
comments appropriately. In addition, any
calls to typedefs "stServiceFlowParamSI,
*pstServiceFlowParamSI, and CServiceFlowParamSI"
are changed to call the struct directly.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes typedef for _stLocalSFAddRequest,
and changes the name of the struct to
bcm_add_request. In addition, any
calls to typedefs "stLocalSFAddRequest or
*pstLocalSFAddRequest" are changed to
call the struct directly.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes typedef for _stLocalSFAddIndication,
and changes the name of the struct to
bcm_add_indication. In addition, any
calls to typedefs "stLocalSFAddIndication,
*pstLocalSFAddIndication, stLocalSFChangeRequest,
*pstLocalSFChangeRequest, stLocalSFChangeIndication,
or *pstLocalSFChangeIndication " are changed to
call the struct directly.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes typedef for _stLocalSFDeleteRequest,
and changes the name of the struct to
bcm_del_request. In addition, any
calls to typedefs "stLocalSFDeleteRequest or
*pstLocalSFDeleteRequest" are
changed to call the struct directly.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes typedef for
stLocalSFDeleteIndication, and
changes the name of the struct to
bcm_del_indication. In addition, any
calls to the following typedef
"stLocalSFDeleteIndication" are changed to call
the struct directly.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fixes the following errors:

drivers/staging/rtl8712/rtl871x_security.c:61: ERROR: "foo * bar" should
be "foo *bar"
drivers/staging/rtl8712/rtl871x_security.c:291: ERROR: "foo * bar"
should be "foo *bar"
drivers/staging/rtl8712/rtl871x_security.c:323: ERROR: "foo * bar"
should be "foo *bar"
drivers/staging/rtl8712/rtl871x_security.c:1371: ERROR: "(foo*)" should
be "(foo *)"
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fixes the following error:

drivers/staging/rtl8712/rtl8712_xmit.c:379:  ERROR: "foo * bar" should
be "foo *bar"
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fixes the following checkpatch warning:

drivers/staging/rtl8712/os_intfs.c:99: ERROR: do not initialise statics
to 0 or NULL

as statics are always initialised to 0.
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If we don't fill the whole buffer then there is information leaked to
the user.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

checkpatch cleanup: Removed some undesired spaces, lines and tabs to comply with coding style.
Signed-off-by: Harsh Kumar <harsh1kumar@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

checkpatch cleanup: Changed c99 comments to c89 comments
Signed-off-by: Harsh Kumar <harsh1kumar@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-v3.7e' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Fifth round of new drivers and device support for the IIO
subsystem in the 3.7 cycle.

Here we have a mixed bag of new stuff, minor fixes and
more major fixes for drivers added earlier in this cycle.

1) A number of fixes for the HID sensors code added in previous
pull request.  Typical stuff that has become apparent as more eyes
have looked at the code post merging. Similar case for the ad5755 dac.

2) Cleanups of error handing in inkern.c - again typical stuff to see
as code comes into heavier use and people notice the naughty short
cuts that snuck in originally and kindly fix them.

3) A series from Lars that removes some incorrect error handling
from the remove functions of a number of drivers.  These have been
there for a very long time hence I'm not pushing these out for the
3.6 cycle.

4) Support for more parts in the ad7780 driver.

5) A driver for the adcs on the lp8788 power management unit

6) A client driver for IIO to allow it's ADCs to be used for
battery status measurement.  Note this driver has some dependencies
on some utility functions added to IIO in this series, hence it is
coming via this tree rather than Anton's.

7) A null pointer dereference bug in the 'fake' driver. I'm not
doing this as a fix for the 3.6 cycle because it only effects
'fake' hardware and that code is typically only used by people
investigating how IIO works as part of writing new drivers. Hence
it's hardly a critical fix.

Removed an unused macro. Plus, couple of grammatical and coding style fixes.

1) The macro _INLINE is not used anywhere. Anyways __inline is not portable.
2) Changed comment from "Not use" to "Unused" make it grammatically correct and
   to fit in 80 word limit.
3.) Removed space after *
Signed-off-by: Harsh Kumar <harsh1kumar@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

t3e3_init_channel() incorrectly handles errors in several places:
it returns zero and does not deallocate all required resources.
The patch fixes that places.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If the config contains CONFIG_IIO_BUFFER=y and CONFIG_IIO_SIMPLE_DUMMY_BUFFER=n
iio_simple_dummy_configure_buffer() is stubbed out and iio_buffer_register() is
not. As a result we try to register a buffer which has not been configured.
This will causes a NULL pointer deref in iio_buffer_register. To solve this
issue move the iio_buffer_register() call to iio_simple_dummy_configure_buffer(),
so it will only be called if iio_simple_dummy_configure_buffer() has been called.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Driver to allow use of the ADC drivers supported by the IIO
subsystem for battery status monitoring. Connecting this
driver to the relevant IIO device requires registration of
the appropriate iio_map structure array by the IIO device
driver (usually from platform data).  If specified the driver
will also make use of a gpio to provide interrupt driven
notification that the battery is fully charged.

In last version:
Addressed concerns raised by lars:
a. made the adc_bat per device.
b. get the IIO channel using hardcoded channel names.
c. Minor issues related to gpio_is_valid and some code
   refactoring.

In V1:
Addressed concerns raised by Anton:
a. changed the struct name to gab(generic adc battery).
b. Added some functions to neaten the code.
c. Some minor coding guidelines changes.
d. Used the latest function introduce by lars:
   iio_read_channel_processed to streamline the code.

In V2:
Addressed concerns by lars:
a. No need of allocating memory for channels.Make it array.
b. Code restructring, coding style and following kernel guidelines changes
   suggested by him.

In V3:
Addressed conerns by Anton:
a. Added the copyright.
b. Coding guidelines changes suggested by him.
c. Added Makefile and Kconfig
Signed-off-by: anish kumar <anish198519851985@gmail.com>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>