When reopening the network device on ra7795/salvator-x, e.g. after a
DHCP timeout:

    IP-Config: Reopening network devices...
    genirq: Flags mismatch irq 139. 00000000 (eth0:ch24:emac) vs. 00000000 (eth0:ch24:emac)
    ravb e6800000.ethernet eth0: cannot request IRQ eth0:ch24:emac
    IP-Config: Failed to open eth0
    IP-Config: No network devices available

The "mismatch" is due to requesting an IRQ that is already in use,
while IRQF_PROBE_SHARED wasn't set.

However, the real cause is that ravb_close() doesn't release the R-Car
Gen3-specific secondary IRQ.

Add the missing free_irq() call to fix this.

Fixes: 22d4df8f ("ravb: Add support for r8a7795 SoC")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

glibc's net/if.h contains copies of definitions from linux/if.h and these
conflict and cause build failures if both files are included by application
source code. Changes in uapi headers, which fixed header file dependencies to
include linux/if.h when it was needed, e.g. commit 1ffad83d, made the
net/if.h and linux/if.h incompatibilities visible as build failures for
userspace applications like iproute2 and xtables-addons.

This patch fixes compile errors when glibc net/if.h is included before
linux/if.h:

./linux/if.h:99:21: error: redeclaration of enumerator ‘IFF_NOARP’
./linux/if.h:98:23: error: redeclaration of enumerator ‘IFF_RUNNING’
./linux/if.h:97:26: error: redeclaration of enumerator ‘IFF_NOTRAILERS’
./linux/if.h:96:27: error: redeclaration of enumerator ‘IFF_POINTOPOINT’
./linux/if.h:95:24: error: redeclaration of enumerator ‘IFF_LOOPBACK’
./linux/if.h:94:21: error: redeclaration of enumerator ‘IFF_DEBUG’
./linux/if.h:93:25: error: redeclaration of enumerator ‘IFF_BROADCAST’
./linux/if.h:92:19: error: redeclaration of enumerator ‘IFF_UP’
./linux/if.h:252:8: error: redefinition of ‘struct ifconf’
./linux/if.h:203:8: error: redefinition of ‘struct ifreq’
./linux/if.h:169:8: error: redefinition of ‘struct ifmap’
./linux/if.h:107:23: error: redeclaration of enumerator ‘IFF_DYNAMIC’
./linux/if.h:106:25: error: redeclaration of enumerator ‘IFF_AUTOMEDIA’
./linux/if.h:105:23: error: redeclaration of enumerator ‘IFF_PORTSEL’
./linux/if.h:104:25: error: redeclaration of enumerator ‘IFF_MULTICAST’
./linux/if.h:103:21: error: redeclaration of enumerator ‘IFF_SLAVE’
./linux/if.h:102:22: error: redeclaration of enumerator ‘IFF_MASTER’
./linux/if.h:101:24: error: redeclaration of enumerator ‘IFF_ALLMULTI’
./linux/if.h:100:23: error: redeclaration of enumerator ‘IFF_PROMISC’

The cases where linux/if.h is included before net/if.h need a similar fix in
the glibc side, or the order of include files can be changed userspace
code as a workaround.

This change was tested in x86 userspace on Debian unstable with
scripts/headers_compile_test.sh:

$ make headers_install && \
  cd usr/include && ../../scripts/headers_compile_test.sh -l -k
...
cc -Wall -c -nostdinc -I /usr/lib/gcc/i586-linux-gnu/5/include -I /usr/lib/gcc/i586-linux-gnu/5/include-fixed -I . -I /home/mcfrisk/src/linux-2.6/usr/headers_compile_test_include.2uX2zH -I /home/mcfrisk/src/linux-2.6/usr/headers_compile_test_include.2uX2zH/i586-linux-gnu -o /dev/null ./linux/if.h_libc_before_kernel.h
PASSED libc before kernel test: ./linux/if.h
Reported-by: Jan Engelhardt <jengelh@inai.de>
Reported-by: Josh Boyer <jwboyer@fedoraproject.org>
Reported-by: Stephen Hemminger <shemming@brocade.com>
Reported-by: Waldemar Brodkorb <mail@waldemar-brodkorb.de>
Cc: Gabriel Laskar <gabriel@lse.epita.fr>
Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull crypto fixes from Herbert Xu:
 "This fixes the following issues:

   - bug in ahash SG list walking that may lead to crashes

   - resource leak in qat

   - missing RSA dependency that causes it to fail"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: rsa - select crypto mgr dependency
  crypto: hash - Fix page length clamping in hash walk
  crypto: qat - fix adf_ctl_drv.c:undefined reference to adf_init_pf_wq
  crypto: qat - fix invalid pf2vf_resp_wq logic

Pull networking fixes from David Miller:

 1) Check klogctl failure correctly, from Colin Ian King.

 2) Prevent OOM when under memory pressure in flowcache, from Steffen
    Klassert.

 3) Fix info leak in llc and rtnetlink ifmap code, from Kangjie Lu.

 4) Memory barrier and multicast handling fixes in bnxt_en, from Michael
    Chan.

 5) Endianness bug in mlx5, from Daniel Jurgens.

 6) Fix disconnect handling in VSOCK, from Ian Campbell.

 7) Fix locking of netdev list walking in get_bridge_ifindices(), from
    Nikolay Aleksandrov.

 8) Bridge multicast MLD parser can look at wrong packet offsets, fix
    from Linus Lüssing.

 9) Fix chip hang in qede driver, from Sudarsana Reddy Kalluru.

10) Fix missing setting of encapsulation before inner handling completes
    in udp_offload code, from Jarno Rajahalme.

11) Missing rollbacks during LAG join and flood configuration failures
    in mlxsw driver, from Ido Schimmel.

12) Fix error code checks in netxen driver, from Dan Carpenter.

13) Fix key size in new macsec driver, from Sabrina Dubroca.

14) Fix mlx5/VXLAN dependencies, from Arnd Bergmann.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (29 commits)
  net/mlx5e: make VXLAN support conditional
  Revert "net/mlx5: Kconfig: Fix MLX5_EN/VXLAN build issue"
  macsec: key identifier is 128 bits, not 64
  Documentation/networking: more accurate LCO explanation
  macvtap: segmented packet is consumed
  tools: bpf_jit_disasm: check for klogctl failure
  qede: uninitialized variable in qede_start_xmit()
  netxen: netxen_rom_fast_read() doesn't return -1
  netxen: reversed condition in netxen_nic_set_link_parameters()
  netxen: fix error handling in netxen_get_flash_block()
  mlxsw: spectrum: Add missing rollback in flood configuration
  mlxsw: spectrum: Fix rollback order in LAG join failure
  udp_offload: Set encapsulation before inner completes.
  udp_tunnel: Remove redundant udp_tunnel_gro_complete().
  qede: prevent chip hang when increasing channels
  net: ipv6: tcp reset, icmp need to consider L3 domain
  bridge: fix igmp / mld query parsing
  net: bridge: fix old ioctl unlocked net device walk
  VSOCK: do not disconnect socket when peer has shutdown SEND only
  net/mlx4_en: Fix endianness bug in IPV6 csum calculation
  ...

gcc support for __builtin_bswap16() was supposedly added for powerpc in
gcc 4.6, and was then later added for other architectures in gcc 4.8.

However, Stephen Rothwell reported that attempting to use it on powerpc
in gcc 4.6 fails with:

  lib/vsprintf.c:160:2: error: initializer element is not constant
  lib/vsprintf.c:160:2: error: (near initialization for 'decpair[0]')
  lib/vsprintf.c:160:2: error: initializer element is not constant
  lib/vsprintf.c:160:2: error: (near initialization for 'decpair[1]')
  ...

I'm not entirely sure what those errors mean, but I don't see them on
gcc 4.8.  So let's consider gcc 4.8 to be the official starting point
for __builtin_bswap16().

Arnd Bergmann adds:
 "I found the commit in gcc-4.8 that replaced the powerpc-specific
  implementation of __builtin_bswap16 with an architecture-independent
  one.  Apparently the powerpc version (gcc-4.6 and 4.7) just mapped to
  the lhbrx/sthbrx instructions, so it ended up not being a constant,
  though the intent of the patch was mainly to add support for the
  builtin to x86:

    https://gcc.gnu.org/bugzilla/show_bug.cgi?id=52624

  has the patch that went into gcc-4.8 and more information."

Fixes: 7322dd75 ("byteswap: try to avoid __builtin_constant_p gcc bug")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Saeed Mahameed says:

====================
net/mlx5e: Kconfig fixes for VxLAN

Reposting to net the build errors fixes posted by Arnd last week.

Originally Arnd posted those fixes to net-next, while the issue
is also seen in net.  For net-next a different approach is required
for fixing the issue as VXLAN and Device Drivers are no longer
dependent, but there is no harm for those fixes to get into net-next.

Optionally, once net is merged into net-next we can
Revert "net/mlx5e: make VXLAN support conditional" as the
CONFIG_MLX5_CORE_EN_VXLAN will no longer be required.

Applied on top: 28892865 ('mlxsw: spectrum: Add missing rollback in flood configuration')
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

VXLAN can be disabled at compile-time or it can be a loadable
module while mlx5 is built-in, which leads to a link error:

drivers/net/built-in.o: In function `mlx5e_create_netdev':
ntb_netdev.c:(.text+0x106de4): undefined reference to `vxlan_get_rx_port'

This avoids the link error and makes the vxlan code optional,
like the other ethernet drivers do as well.

Link: https://patchwork.ozlabs.org/patch/589296/
Fixes: b3f63c3d ("net/mlx5e: Add netdev support for VXLAN tunneling")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 69976fb1.

We cannot select VXLAN when IPv4 support is disabled, that just gives
us additional build errors, including:

warning: (MLX5_CORE_EN) selects VXLAN which has unmet direct dependencies (NETDEVICES && NET_CORE && INET)
In file included from ../drivers/net/vxlan.c:36:0:
include/net/udp_tunnel.h: In function 'udp_tunnel_handle_offloads':
include/net/udp_tunnel.h:112:9: error: implicit declaration of function 'iptunnel_handle_offloads' [-Werror=implicit-function-declaration]
  return iptunnel_handle_offloads(skb, type);
         ^~~~~~~~~~~~~~~~~~~~~~~~

I'm sending a proper fix for the original bug in a separate patch.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The MACsec standard mentions a key identifier for each key, but
doesn't specify anything about it, so I arbitrarily chose 64 bits.

IEEE 802.1X-2010 specifies MKA (MACsec Key Agreement), and defines the
key identifier to be 128 bits (96 bits "member identifier" + 32 bits
"key number").
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

In few places the term "ones-complement sum" was used but the actual
meaning is "the complement of the ones-complement sum".

Also, avoid enclosing long statements with underscore, to ease
readability.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If GSO packet is segmented and its segments are properly queued,
we call consume_skb() instead of kfree_skb() to be drop monitor
friendly.

Fixes: 3e4f8b78 ("macvtap: Perform GSO on forwarding path.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vlad Yasevich <vyasevic@redhat.com>
Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

klogctl can fail and return -ve len, so check for this and
return NULL to avoid passing a (size_t)-1 to malloc.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

"data_split" was never set to false.  It's just uninitialized.

Fixes: 2950219d ('qede: Add basic network device support')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The error handling is broken here.  netxen_rom_fast_read() returns zero
on success and -EIO on error.  It never returns -1.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

My static checker complains that we are using "autoneg" without
initializing it.  The problem is the ->phy_read() condition is reversed
so we only set this on error instead of success.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

My static checker complained that "v" can be used unintialized if
netxen_rom_fast_read() returns -EIO.  That function never actually
returns -1.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull misc driver fixes from Gfreg KH:
 "Here are three small fixes for some driver problems that were
  reported.  Full details in the shortlog below.

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  nvmem: mxs-ocotp: fix buffer overflow in read
  Drivers: hv: vmbus: Fix signaling logic in hv_need_to_signal_on_read()
  misc: mic: Fix for double fetch security bug in VOP driver

Pull IIO driver fixes from Grek KH:
 "It's really just IIO drivers here, some small fixes that resolve some
  'crash on boot' errors that have shown up in the -rc series, and other
  bugfixes that are required.

  All have been in linux-next with no reported problems"

* tag 'staging-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: imu: mpu6050: Fix name/chip_id when using ACPI
  iio: imu: mpu6050: fix possible NULL dereferences
  iio:adc:at91-sama5d2: Repair crash on module removal
  iio: ak8975: fix maybe-uninitialized warning
  iio: ak8975: Fix NULL pointer exception on early interrupt

Pull USB fixes from Greg KH:
 "Here are some last-remaining fixes for USB drivers to resolve issues
  that have shown up in testing.  And two new device ids as well.

  All of these have been in linux-next with no reported issues"

* tag 'usb-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  Revert "USB / PM: Allow USB devices to remain runtime-suspended when sleeping"
  usb: musb: jz4740: fix error check of usb_get_phy()
  Revert "usb: musb: musb_host: Enable HCD_BH flag to handle urb return in bottom half"
  usb: musb: gadget: nuke endpoint before setting its descriptor to NULL
  USB: serial: cp210x: add Straizona Focusers device ids
  USB: serial: cp210x: add ID for Link ECU

Pull ARM fixes from Russell King:
 "These are a number of updates to fix a few problems found in the ARM
  nommu code over the last couple of years, caused mostly by changes on
  the mmu side"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8573/1: domain: move {set,get}_domain under config guard
  ARM: 8572/1: nommu: change memory reserve for the vectors
  ARM: 8571/1: nommu: fix PMSAv7 setup

Pull media fixes from Mauro Carvalho Chehab:

  - deadlock fixes on driver probe at exynos4-is and s43-camif drivers

  - a build breakage if media controller is enabled and USB or PCI is
   built as module.

* tag 'media/v4.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] media-device: fix builds when USB or PCI is compiled as module
  [media] media: s3c-camif: fix deadlock on driver probe()
  [media] media: exynos4-is: fix deadlock on driver probe

Pull libata fixes from Tejun Heo:
 "An ahci driver addition and updates to ahci port enable handling for
  some platform devices"

* 'for-4.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ata: add AMD Seattle platform driver
  ARM: dts: apq8064: add ahci ports-implemented mask
  ata: ahci-platform: Add ports-implemented DT bindings.
  libahci: save port map for forced port map

Pull rdma fix from Doug Ledford:
 "Fix for max sector calculation in iSER"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
  IB/iser: Fix max_sectors calculation

When we fail to set the flooding configuration for the broadcast and
unregistered multicast traffic, we should revert the flooding
configuration of the unknown unicast traffic.

Fixes: 0293038e ("mlxsw: spectrum: Add support for flood control")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make the leave procedure in the error path symmetric to the join
procedure and first remove the port from the collector before
potentially destroying the LAG.

Fixes: 0d65fc13 ("mlxsw: spectrum: Implement LAG port join/leave")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

UDP tunnel segmentation code relies on the inner offsets being set for
an UDP tunnel GSO packet, but the inner *_complete() functions will
set the inner offsets only if 'encapsulation' is set before calling
them.  Currently, udp_gro_complete() sets 'encapsulation' only after
the inner *_complete() functions are done.  This causes the inner
offsets having invalid values after udp_gro_complete() returns, which
in turn will make it impossible to properly segment the packet in case
it needs to be forwarded, which would be visible to the user either as
invalid packets being sent or as packet loss.

This patch fixes this by setting skb's 'encapsulation' in
udp_gro_complete() before calling into the inner complete functions,
and by making each possible UDP tunnel gro_complete() callback set the
inner_mac_header to the beginning of the tunnel payload.
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Reviewed-by: Alexander Duyck <aduyck@mirantis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The setting of the UDP tunnel GSO type is already performed by
udp[46]_gro_complete().
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull writeback fix from Jens Axboe:
 "Just a single fix for domain aware writeback, fixing a regression that
  can cause balance_dirty_pages() to keep looping while not getting any
  work done"

* 'for-linus' of git://git.kernel.dk/linux-block:
  writeback: Fix performance regression in wb_over_bg_thresh()

Pull x86 fixes from Ingo Molnar:
 "This contains two fixes: a boot fix for older SGI/UV systems, and an
  APIC calibration fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tsc: Read all ratio bits from MSR_PLATFORM_INFO
  x86/platform/UV: Bring back the call to map_low_mmrs in uv_system_init

qede requires qed to provide enough resources to accommodate 16 combined
channels, but that upper-bound isn't actually being enforced by it.
Instead, qed inform back to qede how many channels can be opened based on
available resources - but that calculation doesn't really take into account
the resources requested by qede; Instead it considers other FW/HW available
resources.

As a result, if a user would increase the number of channels to more than
16 [e.g., using ethtool] the chip would hang.

This change increments the resources requested by qede to 64 combined
channels instead of 16; This value is an upper bound on the possible
available channels [due to other FW/HW resources].
Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Responses for packets to unused ports are getting lost with L3 domains.

IPv4 has ip_send_unicast_reply for sending TCP responses which accounts
for L3 domains; update the IPv6 counterpart tcp_v6_send_response.
For icmp the L3 master check needs to be moved up in icmp6_send
to properly respond to UDP packets to a port with no listener.

Fixes: ca254490 ("net: Add VRF support to IPv6 stack")
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull power management and ACPI fixes from Rafael Wysocki:
 "Fixes for problems introduced or discovered recently (intel_pstate,
  sti-cpufreq, ARM64 cpuidle, Operating Performance Points framework,
  generic device properties framework) and one fix for a hotplug-related
  deadlock in ACPICA that's been there forever, but is nasty enough.

  Specifics:

   - Fix for a recent regression in the intel_pstate driver causing it
     to fail to restore the HWP (HW-managed P-states) configuration of
     the boot CPU after suspend-to-RAM (Rafael Wysocki).

   - Fix for two recent regressions in the intel_pstate driver, one that
     can trigger a divide by zero if the driver is accessed via sysfs
     before it manages to take the first sample and one causing it to
     fail to update a structure field used in a trace point, so the
     information coming from it is less useful (Rafael Wysocki).

   - Fix for a problem in the sti-cpufreq driver introduced during the
     4.5 cycle that causes it to break CPU PM in multi-platform kernels
     by registering cpufreq-dt (which subsequently doesn't work)
     unconditionally and preventing the driver that would actually work
     from registering (Sudeep Holla).

   - Stable-candidate fix for an ARM64 cpuidle issue causing idle state
     usage counters to be incorrectly updated for idle states that were
     not entered due to errors (James Morse).

   - Fix for a recently introduced issue in the OPP (Operating
     Performance Points) framework causing it to print bogus error
     messages for missing optional regulators (Viresh Kumar).

   - Fix for a recently introduced issue in the generic device
     properties framework that may cause it to attempt to dereferece and
     invalid pointer in some cases (Heikki Krogerus).

   - Fix for a deadlock in the ACPICA core that may be triggered by
     device (eg Thunderbolt) hotplug (Prarit Bhargava)"

* tag 'pm+acpi-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / OPP: Remove useless check
  ACPICA: Dispatcher: Update thread ID for recursive method calls
  intel_pstate: Fix intel_pstate_get()
  cpufreq: intel_pstate: Fix HWP on boot CPU after system resume
  cpufreq: st: enable selective initialization based on the platform
  ARM: cpuidle: Pass on arm_cpuidle_suspend()'s return value
  device property: Avoid potential dereferences of invalid pointers

Pull scheduler fix from Ingo Molnar:
 "This contains a single fix that fixes a nohz tick stopping bug when
  mixed-poliocy SCHED_FIFO and SCHED_RR tasks are present on a runqueue"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  nohz/full, sched/rt: Fix missed tick-reenabling bug in sched_can_stop_tick()

Pull perf fixes from Ingo Molnar:
 "This tree contains two fixes: new Intel CPU model numbers and an
  AMD/iommu uncore PMU driver fix"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/amd/iommu: Do not register a task ctx for uncore like PMUs
  perf/x86: Add model numbers for Kabylake CPUs

Pull EFI fixes from Ingo Molnar:
 "This tree contains three fixes: a console spam fix, a file pattern fix
  and a sysfb_efi fix for a bug that triggered on older ThinkPads"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sysfb_efi: Fix valid BAR address range check
  x86/efi-bgrt: Switch all pr_err() to pr_notice() for invalid BGRT
  MAINTAINERS: Remove asterisk from EFI directory names

Pull parisc fix from Helge Deller:
 "Patch from Dmitry V Levin to fix a kernel crash when a straced process
  calls the (invalid) syscall which is equal to value of __NR_Linux_syscalls"

* 'parisc-4.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: fix a bug when syscall number of tracee is __NR_Linux_syscalls

Pull ARC fixes from Vineet Gupta:
 "Late in the cycle, but this has fixes for couple of issues: a PAE40
  boot crash and Arnd spotting lack of barriers in BE io-accessors.

  The 3rd patch for enabling highmem in low physical mem ;-) honestly is
  more than a "fix" but its been in works for some time, seems to be
  stable in testing and enables 2 of our customers to go forward with
  4.6 kernel.

   - Fix for PTE truncation in PAE40 builds
   - Fix for big endian IO accessors lacking IO barrier
   - Allow HIGHMEM to work with low physical addresses"

* tag 'arc-4.6-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: support HIGHMEM even without PAE40
  ARC: Fix PAE40 boot failures due to PTE truncation
  ARC: Add missing io barriers to io{read,write}{16,32}be()

Pull powerpc fix from Michael Ellerman:
 "Fix bad inline asm constraint in create_zero_mask() from Anton
  Blanchard"

* tag 'powerpc-4.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc: Fix bad inline asm constraint in create_zero_mask()

Pull drm fixes from Dave Airlie:
 "Fixes for i915, amdgpu/radeon and imx.

  The IMX fix is for an autoloading regression found in Fedora.  The
  radeon fixes, are the same fix to amdgpu/radeon to avoid a hardware
  lockup in some circumstances with a bad mode, and a double free bug I
  took a few hours chasing down the other morning.

  The i915 fixes are across the board, all stable material, and fixing
  some hangs and suspend/resume issues, along with a live status
  regressions"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  gpu: ipu-v3: Fix imx-ipuv3-crtc module autoloading
  drm/amdgpu: make sure vertical front porch is at least 1
  drm/radeon: make sure vertical front porch is at least 1
  drm/amdgpu: set metadata pointer to NULL after freeing.
  drm/i915: Make RPS EI/thresholds multiple of 25 on SNB-BDW
  drm/i915: Fake HDMI live status
  drm/i915: Fix eDP low vswing for Broadwell
  drm/i915/ddi: Fix eDP VDD handling during booting and suspend/resume
  drm/i915: Fix system resume if PCI device remained enabled
  drm/i915: Avoid stalling on pending flips for legacy cursor updates