- 17 Dec, 2018 40 commits
-
-
Yi Wang authored
[ Upstream commit 1e4329ee ] The inline keyword which is not at the beginning of the function declaration may trigger the following build warnings, so let's fix it: arch/x86/kvm/vmx.c:1309:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration] arch/x86/kvm/vmx.c:5947:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration] arch/x86/kvm/vmx.c:5985:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration] arch/x86/kvm/vmx.c:6023:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration] Signed-off-by:
Yi Wang <wang.yi59@zte.com.cn> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Yi Wang authored
[ Upstream commit 354cb410 ] We get the following warnings about empty statements when building with 'W=1': arch/x86/kvm/lapic.c:632:53: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] arch/x86/kvm/lapic.c:1907:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] arch/x86/kvm/lapic.c:1936:65: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] arch/x86/kvm/lapic.c:1975:44: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] Rework the debug helper macro to get rid of these warnings. Signed-off-by:
-
Artemy Kovalyov authored
[ Upstream commit 75b7b86b ] Memory windows are implemented with an indirect MKey, when a page fault event comes for a MW Mkey we need to find the MR at the end of the list of the indirect MKeys by iterating on all items from the first to the last. The offset calculated during this process has to be zeroed after the first iteration or the next iteration will start from a wrong address, resulting incorrect ODP faulting behavior. Fixes: db570d7d ("IB/mlx5: Add ODP support to MW") Signed-off-by:
Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by:
Moni Shoua <monis@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Alin Nastac authored
[ Upstream commit 508b0904 ] When ip6_route_me_harder is invoked, it resets outgoing interface of: - link-local scoped packets sent by neighbor discovery - multicast packets sent by MLD host - multicast packets send by MLD proxy daemon that sets outgoing interface through IPV6_PKTINFO ipi6_ifindex Link-local and multicast packets must keep their original oif after ip6_route_me_harder is called. Signed-off-by:
Alin Nastac <alin.nastac@gmail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Christian Hewitt authored
[ Upstream commit 31e1ab49 ] This essential mode for PAL users is missing, so add it. Fixes: 335e3713 ("drm/meson: Add support for HDMI venc modes and settings") Signed-off-by:
Christian Hewitt <christianshewitt@gmail.com> Acked-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
-
Aaro Koskinen authored
[ Upstream commit 069caf59 ] Commit 387f869d ("usb: gadget: u_ether: conditionally align transfer size") started aligning transfer size only if requested, breaking omap_udc DMA mode. Set quirk_ep_out_aligned_size to restore the old behaviour. Fixes: 387f869d ("usb: gadget: u_ether: conditionally align transfer size") Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Aaro Koskinen authored
[ Upstream commit 2c2322fb ] On Palm TE nothing happens when you try to use gadget drivers and plug the USB cable. Fix by adding the board to the vbus sense quirk list. Signed-off-by:
-
Aaro Koskinen authored
[ Upstream commit 6ca6695f ] On OMAP 15xx machines there are no transceivers, and omap_udc_start() always fails as it forgot to adjust the default return value. Signed-off-by:
-
Aaro Koskinen authored
[ Upstream commit 99f70036 ] We currently crash if usb_add_gadget_udc_release() fails, since the udc->done is not initialized until in the remove function. Furthermore, on module removal the udc data is accessed although the release function is already triggered by usb_del_gadget_udc() early in the function. Fix by rewriting the release and remove functions, basically moving all the cleanup into the release function, and doing the completion only in the module removal case. The patch fixes omap_udc module probe with a failing gadged, and also allows the removal of omap_udc. Tested by running "modprobe omap_udc; modprobe -r omap_udc" in a loop. Signed-off-by:
-
Aaro Koskinen authored
[ Upstream commit 286afdde ] The current code fails to release the third irq on the error path (observed by reading the code), and we get also multiple WARNs with failing gadget drivers due to duplicate IRQ releases. Fix by using devm_request_irq(). Signed-off-by:
-
Xin Long authored
[ Upstream commit 2a31e4bd ] ip_vs_dst_event is supposed to clean up all dst used in ipvs' destinations when a net dev is going down. But it works only when the dst's dev is the same as the dev from the event. Now with the same priority but late registration, ip_vs_dst_notifier is always called later than ipv6_dev_notf where the dst's dev is set to lo for NETDEV_DOWN event. As the dst's dev lo is not the same as the dev from the event in ip_vs_dst_event, ip_vs_dst_notifier doesn't actually work. Also as these dst have to wait for dest_trash_timer to clean them up. It would cause some non-permanent kernel warnings: unregister_netdevice: waiting for br0 to become free. Usage count = 3 To fix it, call ip_vs_dst_notifier earlier than ipv6_dev_notf by increasing its priority to ADDRCONF_NOTIFY_PRIORITY + 5. Note that for ipv4 route fib_netdev_notifier doesn't set dst's dev to lo in NETDEV_DOWN event, so this fix is only needed when IP_VS_IPV6 is defined. Fixes: 7a4f0761 ("IPVS: init and cleanup restructuring") Reported-by:
Li Shuang <shuali@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Julian Anastasov <ja@ssi.bg> Acked-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
Martynas Pumputis authored
[ Upstream commit 1efb6ee3 ] A format string consisting of "%p" or "%s" followed by an invalid specifier (e.g. "%p%\n" or "%s%") could pass the check which would make format_decode (lib/vsprintf.c) to warn. Fixes: 9c959c86 ("tracing: Allow BPF programs to call bpf_trace_printk()") Reported-by: syzbot+1ec5c5ec949c4adaa0c4@syzkaller.appspotmail.com Signed-off-by:
Martynas Pumputis <m@lambda.lt> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Pan Bian authored
[ Upstream commit 2084ac6c ] The function dentry_connected calls dput(dentry) to drop the previously acquired reference to dentry. In this case, dentry can be released. After that, IS_ROOT(dentry) checks the condition (dentry == dentry->d_parent), which may result in a use-after-free bug. This patch directly compares dentry with its parent obtained before dropping the reference. Fixes: a056cc89("exportfs: stop retrying once we race with rename/remove") Signed-off-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Peter Ujfalusi authored
[ Upstream commit ffdcc363 ] We need to block sleep states which would require longer time to leave than the time the DMA must react to the DMA request in order to keep the FIFO serviced without overrun. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by:
Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Peter Ujfalusi authored
[ Upstream commit 373a500e ] We need to block sleep states which would require longer time to leave than the time the DMA must react to the DMA request in order to keep the FIFO serviced without under of overrun. Signed-off-by:
-
Peter Ujfalusi authored
[ Upstream commit dd2f52d8 ] The latency number is in usec for the pm_qos. Correct the calculation to give us the time in usec Signed-off-by:
-
Kamal Heib authored
[ Upstream commit 4f32fb92 ] rdmavt uses a crazy system that looses the type checking when assinging functions to struct ib_device function pointers. Because of this the signature to this function was not changed when the below commit revised things. Fix the signature so we are not calling a function pointer with a mismatched signature. Fixes: 477864c8 ("IB/core: Let create_ah return extended response to user") Signed-off-by:
Kamal Heib <kamalheib1@gmail.com> Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
-
Majd Dibbiny authored
[ Upstream commit 074fca3a ] Currently, for IB_WR_LOCAL_INV WR, when the next fence is None, the current fence will be SMALL instead of Normal Fence. Without this patch krping doesn't work on CX-5 devices and throws following error: The error messages are from CX5 driver are: (from server side) [ 710.434014] mlx5_0:dump_cqe:278:(pid 2712): dump error cqe [ 710.434016] 00000000 00000000 00000000 00000000 [ 710.434016] 00000000 00000000 00000000 00000000 [ 710.434017] 00000000 00000000 00000000 00000000 [ 710.434018] 00000000 93003204 100000b8 000524d2 [ 710.434019] krping: cq completion failed with wr_id 0 status 4 opcode 128 vender_err 32 Fixed the logic to set the correct fence type. Fixes: 6e8484c5 ("RDMA/mlx5: set UMR wqe fence according to HCA cap") Signed-off-by:
Majd Dibbiny <majd@mellanox.com> Signed-off-by:
-
Robbie Ko authored
[ Upstream commit a4390aee ] When doing an incremental send, due to the need of delaying directory move (rename) operations we can end up in infinite loop at apply_children_dir_moves(). An example scenario that triggers this problem is described below, where directory names correspond to the numbers of their respective inodes. Parent snapshot: . |--- 261/ |--- 271/ |--- 266/ |--- 259/ |--- 260/ | |--- 267 | |--- 264/ | |--- 258/ | |--- 257/ | |--- 265/ |--- 268/ |--- 269/ | |--- 262/ | |--- 270/ |--- 272/ | |--- 263/ | |--- 275/ | |--- 274/ |--- 273/ Send snapshot: . |-- 275/ |-- 274/ |-- 273/ |-- 262/ |-- 269/ |-- 258/ |-- 271/ |-- 268/ |-- 267/ |-- 270/ |-- 259/ | |-- 265/ | |-- 272/ |-- 257/ |-- 260/ |-- 264/ |-- 263/ |-- 261/ |-- 266/ When processing inode 257 we delay its move (rename) operation because its new parent in the send snapshot, inode 272, was not yet processed. Then when processing inode 272, we delay the move operation for that inode because inode 274 is its ancestor in the send snapshot. Finally we delay the move operation for inode 274 when processing it because inode 275 is its new parent in the send snapshot and was not yet moved. When finishing processing inode 275, we start to do the move operations that were previously delayed (at apply_children_dir_moves()), resulting in the following iterations: 1) We issue the move operation for inode 274; 2) Because inode 262 depended on the move operation of inode 274 (it was delayed because 274 is its ancestor in the send snapshot), we issue the move operation for inode 262; 3) We issue the move operation for inode 272, because it was delayed by inode 274 too (ancestor of 272 in the send snapshot); 4) We issue the move operation for inode 269 (it was delayed by 262); 5) We issue the move operation for inode 257 (it was delayed by 272); 6) We issue the move operation for inode 260 (it was delayed by 272); 7) We issue the move operation for inode 258 (it was delayed by 269); 8) We issue the move operation for inode 264 (it was delayed by 257); 9) We issue the move operation for inode 271 (it was delayed by 258); 10) We issue the move operation for inode 263 (it was delayed by 264); 11) We issue the move operation for inode 268 (it was delayed by 271); 12) We verify if we can issue the move operation for inode 270 (it was delayed by 271). We detect a path loop in the current state, because inode 267 needs to be moved first before we can issue the move operation for inode 270. So we delay again the move operation for inode 270, this time we will attempt to do it after inode 267 is moved; 13) We issue the move operation for inode 261 (it was delayed by 263); 14) We verify if we can issue the move operation for inode 266 (it was delayed by 263). We detect a path loop in the current state, because inode 270 needs to be moved first before we can issue the move operation for inode 266. So we delay again the move operation for inode 266, this time we will attempt to do it after inode 270 is moved (its move operation was delayed in step 12); 15) We issue the move operation for inode 267 (it was delayed by 268); 16) We verify if we can issue the move operation for inode 266 (it was delayed by 270). We detect a path loop in the current state, because inode 270 needs to be moved first before we can issue the move operation for inode 266. So we delay again the move operation for inode 266, this time we will attempt to do it after inode 270 is moved (its move operation was delayed in step 12). So here we added again the same delayed move operation that we added in step 14; 17) We attempt again to see if we can issue the move operation for inode 266, and as in step 16, we realize we can not due to a path loop in the current state due to a dependency on inode 270. Again we delay inode's 266 rename to happen after inode's 270 move operation, adding the same dependency to the empty stack that we did in steps 14 and 16. The next iteration will pick the same move dependency on the stack (the only entry) and realize again there is still a path loop and then again the same dependency to the stack, over and over, resulting in an infinite loop. So fix this by preventing adding the same move dependency entries to the stack by removing each pending move record from the red black tree of pending moves. This way the next call to get_pending_dir_moves() will not return anything for the current parent inode. A test case for fstests, with this reproducer, follows soon. Signed-off-by:
Robbie Ko <robbieko@synology.com> Reviewed-by:
Filipe Manana <fdmanana@suse.com> [Wrote changelog with example and more clear explanation] Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Romain Izard authored
[ Upstream commit 4ab7ca09 ] The SAMA5D2 is different from SAMA5D3 and SAMA5D4, as there are two different clocks for the peripherals in the SoC. The Static Memory controller is connected to the divided master clock. Unfortunately, the device tree does not correctly show this and uses the master clock directly. This clock is then used by the code for the NAND controller to calculate the timings for the controller, and we end up with slow NAND Flash access. Fix the device tree, and the performance of Flash access is improved. Signed-off-by:
Romain Izard <romain.izard.pro@gmail.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Artem Savkov authored
[ Upstream commit 22566c16 ] Because find_symbol_by_name() traverses the same lists as read_symbols(), changing sym->name in place without copying it affects the result of find_symbol_by_name(). In the case where a ".cold" function precedes its parent in sec->symbol_list, it can result in a function being considered a parent of itself. This leads to function length being set to 0 and other consequent side-effects including a segfault in add_switch_table(). The effects of this bug are only visible when building with -ffunction-sections in KCFLAGS. Fix by copying the search string instead of modifying it in place. Signed-off-by:
Artem Savkov <asavkov@redhat.com> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 13810435 ("objtool: Support GCC 8's cold subfunctions") Link: http://lkml.kernel.org/r/910abd6b5a4945130fd44f787c24e07b9e07c8da.1542736240.git.jpoimboe@redhat.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Artem Savkov authored
[ Upstream commit 0b9301fb ] If read_symbols() fails during second list traversal (the one dealing with ".cold" subfunctions) it frees the symbol, but never deletes it from the list/hash_table resulting in symbol being freed again in elf_close(). Fix it by just returning an error, leaving cleanup to elf_close(). Signed-off-by:
-
Trent Piepho authored
[ Upstream commit 68bc10bf ] This bug was introduced in the interaction for two commits on either branch of the merge commit 562df5c8 ("Merge branch 'pci/host-designware' into next"). Commit 4d107d3b ("PCI: imx6: Move link up check into imx6_pcie_wait_for_link()"), changed imx6_pcie_wait_for_link() to poll the link status register directly, checking for link up and not training, and made imx6_pcie_link_up() only check the link up bit (once, not a polling loop). While commit 886bc5ce ("PCI: designware: Add generic dw_pcie_wait_for_link()"), replaced the loop in imx6_pcie_wait_for_link() with a call to a new dwc core function, which polled imx6_pcie_link_up(), which still checked both link up and not training in a loop. When these two commits were merged, the version of imx6_pcie_wait_for_link() from 886bc5ce was kept, which eliminated the link training check placed there by 4d107d3b. However, the version of imx6_pcie_link_up() from 4d107d3b was kept, which eliminated the link training check that had been there and was moved to imx6_pcie_wait_for_link(). The result was the link training check got lost for the imx6 driver. Eliminate imx6_pcie_link_up() so that the default handler, dw_pcie_link_up(), is used instead. The default handler has the correct code, which checks for link up and also that it still is not training, fixing the regression. Fixes: 562df5c8 ("Merge branch 'pci/host-designware' into next") Signed-off-by:
Trent Piepho <tpiepho@impinj.com> [lorenzo.pieralisi@arm.com: rewrote the commit log] Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by:
Lucas Stach <l.stach@pengutronix.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Joao Pinto <Joao.Pinto@synopsys.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by:
-
Jiri Olsa authored
[ Upstream commit b01c1f69 ] When reporting on 'record' server we try to retrieve/use the mnt namespace of the profiled tasks. We use following API with cookie to hold the return namespace, roughly: nsinfo__mountns_enter(struct nsinfo *nsi, struct nscookie *nc) setns(newns, 0); ... new ns related open.. ... nsinfo__mountns_exit(struct nscookie *nc) setns(nc->oldns) Once finished we setns to old namespace, which also sets the current working directory (cwd) to "/", trashing the cwd we had. This is mostly fine, because we use absolute paths almost everywhere, but it screws up 'perf diff': # perf diff failed to open perf.data: No such file or directory (try 'perf record' first) ... Adding the current working directory to be part of the cookie and restoring it in the nsinfo__mountns_exit call. Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Krister Johansen <kjlx@templeofstupid.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: 843ff37b ("perf symbols: Find symbols in different mount namespace") Link: http://lkml.kernel.org/r/20181101170001.30019-1-jolsa@kernel.org [ No need to check for NULL args for free(), use zfree() for struct members ] Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Huacai Chen authored
[ Upstream commit 09aaf681 ] Both datasheet and comments of store_temp_mode() tell us that temp1~4_type is writable, so fix it. Signed-off-by:
Yao Wang <wangyao@lemote.com> Signed-off-by:
Huacai Chen <chenhc@lemote.com> Fixes: 39deb699 (" hwmon: (w83795) Simplify temperature sensor type handling") Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Taehee Yoo authored
[ Upstream commit b4e955e9 ] In the htable_create(), hinfo is allocated by vmalloc() So that if error occurred, hinfo should be freed. Fixes: 11d5f157 ("netfilter: xt_hashlimit: Create revision 2 to support higher pps rates") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
Hans de Goede authored
[ Upstream commit 0145b505 ] Before this commit sensor_hub_input_attr_get_raw_value() failed to take the signedness of 16 and 8 bit values into account, returning e.g. 65436 instead of -100 for the z-axis reading of an accelerometer. This commit adds a new is_signed parameter to the function and makes all callers pass the appropriate value for this. While at it, this commit also fixes up some neighboring lines where statements were needlessly split over 2 lines to improve readability. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Tzung-Bi Shih authored
[ Upstream commit 882eab6c ] Audio map are possible in wrong state before card->instantiated has been set to true. Imaging the following examples: time 1: at the beginning in:-1 in:-1 in:-1 in:-1 out:-1 out:-1 out:-1 out:-1 SIGGEN A B Spk time 2: after someone called snd_soc_dapm_new_widgets() (e.g. create_fill_widget_route_map() in sound/soc/codecs/hdac_hdmi.c) in:1 in:0 in:0 in:0 out:0 out:0 out:0 out:1 SIGGEN A B Spk time 3: routes added in:1 in:0 in:0 in:0 out:0 out:0 out:0 out:1 SIGGEN -----> A -----> B ---> Spk In the end, the path should be powered on but it did not. At time 3, "in" of SIGGEN and "out" of Spk did not propagate to their neighbors because snd_soc_dapm_add_path() will not invalidate the paths if the card has not instantiated (i.e. card->instantiated is false). To correct the state of audio map, recalculate the whole map forcely. Signed-off-by:
Tzung-Bi Shih <tzungbi@google.com> Signed-off-by:
-
Peter Ujfalusi authored
[ Upstream commit 76836fd3 ] The machine driver fails to probe in next-20181113 with: [ 2.539093] omap-abe-twl6040 sound: ASoC: CODEC DAI twl6040-legacy not registered [ 2.546630] omap-abe-twl6040 sound: devm_snd_soc_register_card() failed: -517 ... [ 3.693206] omap-abe-twl6040 sound: ASoC: Both platform name/of_node are set for TWL6040 [ 3.701446] omap-abe-twl6040 sound: ASoC: failed to init link TWL6040 [ 3.708007] omap-abe-twl6040 sound: devm_snd_soc_register_card() failed: -22 [ 3.715148] omap-abe-twl6040: probe of sound failed with error -22 Bisect pointed to a merge commit: first bad commit: [0f688ab20a540aafa984c5dbd68a71debebf4d7f] Merge remote-tracking branch 'net-next/master' and a diff between a working kernel does not reveal anything which would explain the change in behavior. Further investigation showed that on the second try of loading fails because the dai_link->platform is no longer NULL and it might be pointing to uninitialized memory. The fix is to move the snd_soc_dai_link and snd_soc_card inside of the abe_twl6040 struct, which is dynamically allocated every time the driver probes. Signed-off-by:
-
Nicolin Chen authored
[ Upstream commit 38cd989e ] The current register (04h) has a sign bit at MSB. The comments for this calculation also mention that it's a signed register. However, the regval is unsigned type so result of calculation turns out to be an incorrect value when current is negative. This patch simply fixes this by adding a casting to s16. Fixes: 5d389b12 ("hwmon: (ina2xx) Make calibration register value fixed") Signed-off-by:
Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by:
-
Thomas Richter authored
[ Upstream commit 613a41b0 ] On s390 command perf top fails [root@s35lp76 perf] # ./perf top -F100000 --stdio Error: cycles: PMU Hardware doesn't support sampling/overflow-interrupts. Try 'perf stat' [root@s35lp76 perf] # Using event -e rb0000 works as designed. Event rb0000 is the event number of the sampling facility for basic sampling. During system start up the following PMUs are installed in the kernel's PMU list (from head to tail): cpum_cf --> s390 PMU counter facility device driver cpum_sf --> s390 PMU sampling facility device driver uprobe kprobe tracepoint task_clock cpu_clock Perf top executes following functions and calls perf_event_open(2) system call with different parameters many times: cmd_top --> __cmd_top --> perf_evlist__add_default --> __perf_evlist__add_default --> perf_evlist__new_cycles (creates event type:0 (HW) config 0 (CPU_CYCLES) --> perf_event_attr__set_max_precise_ip Uses perf_event_open(2) to detect correct precise_ip level. Fails 3 times on s390 which is ok. Then functions cmd_top --> __cmd_top --> perf_top__start_counters -->perf_evlist__config --> perf_can_comm_exec --> perf_probe_api This functions test support for the following events: "cycles:u", "instructions:u", "cpu-clock:u" using --> perf_do_probe_api --> perf_event_open_cloexec Test the close on exec flag support with perf_event_open(2). perf_do_probe_api returns true if the event is supported. The function returns true because event cpu-clock is supported by the PMU cpu_clock. This is achieved by many calls to perf_event_open(2). Function perf_top__start_counters now calls perf_evsel__open() for every event, which is the default event cpu_cycles (config:0) and type HARDWARE (type:0) which a predfined frequence of 4000. Given the above order of the PMU list, the PMU cpum_cf gets called first and returns 0, which indicates support for this sampling. The event is fully allocated in the function perf_event_open (file kernel/event/core.c near line 10521 and the following check fails: event = perf_event_alloc(&attr, cpu, task, group_leader, NULL, NULL, NULL, cgroup_fd); if (IS_ERR(event)) { err = PTR_ERR(event); goto err_cred; } if (is_sampling_event(event)) { if (event->pmu->capabilities & PERF_PMU_CAP_NO_INTERRUPT) { err = -EOPNOTSUPP; goto err_alloc; } } The check for the interrupt capabilities fails and the system call perf_event_open() returns -EOPNOTSUPP (-95). Add a check to return -ENODEV when sampling is requested in PMU cpum_cf. This allows common kernel code in the perf_event_open() system call to test the next PMU in above list. Fixes: 97b1198f (" "s390, perf: Use common PMU interrupt disabled code") Signed-off-by:
Thomas Richter <tmricht@linux.ibm.com> Reviewed-by:
Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Richard Fitzgerald authored
[ Upstream commit 20e00db2 ] Stack memory isn't DMA-safe so it isn't safe to use either regmap_raw_read or regmap_bulk_read to read into stack memory. The two functions to read the scratch registers were using stack memory and regmap_raw_read. It's not worth allocating memory just for this trivial read, and it isn't time-critical. A simple regmap_read for each register is sufficient. Signed-off-by:
Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by:
-
Nicolin Chen authored
[ Upstream commit 70df9ebb ] When using DT configurations, the id pointer might turn out to be NULL. Then the driver encounters NULL pointer access: Unable to handle kernel read from unreadable memory at vaddr 00000018 [...] PC is at ina2xx_probe+0x114/0x200 LR is at ina2xx_probe+0x10c/0x200 [...] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b The reason is that i2c core returns the id pointer by matching id_table with client->name, while the client->name is actually using the name from the first string in the DT compatible list, not the best one. So i2c core would fail to match the id_table if the best matched compatible string isn't the first one, and then would return a NULL id pointer. This probably should be fixed in i2c core. But it doesn't hurt to make the driver robust. So this patch fixes it by using the "chip" that's added to unify both DT and non-DT configurations. Additionally, since id pointer could be null, so as id->name: ina2xx 10-0047: power monitor (null) (Rshunt = 1000 uOhm) ina2xx 10-0048: power monitor (null) (Rshunt = 10000 uOhm) So this patch also fixes NULL name pointer, using client->name to play safe and to align with hwmon->name. Fixes: bd0ddd4d ("hwmon: (ina2xx) Add OF device ID table") Signed-off-by:
-
Florian Westphal authored
[ Upstream commit 29e38801 ] nft_compat ops do not have static storage duration, unlike all other expressions. When nf_tables_expr_destroy() returns, expr->ops might have been free'd already, so we need to store next address before calling expression destructor. For same reason, we can't deref match pointer after nft_xt_put(). This can be easily reproduced by adding msleep() before nft_match_destroy() returns. Fixes: 0ca743a5 ("netfilter: nf_tables: add compatibility layer for x_tables") Reported-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Florian Westphal authored
[ Upstream commit 25d8bced ] Start flood ping for each cpu while loading/flushing rulesets to make sure we do not access already-free'd rules from nf_tables evaluation loop. Also add this to TARGETS so 'make run_tests' in selftest dir runs it automatically. This would have caught the bug fixed in previous change ("netfilter: nf_tables: do not skip inactive chains during generation update") sooner. Signed-off-by:
-
YueHaibing authored
[ Upstream commit c4b7d1ba ] Fixes gcc '-Wunused-but-set-variable' warning: fs/sysv/inode.c: In function '__sysv_write_inode': fs/sysv/inode.c:239:6: warning: variable 'err' set but not used [-Wunused-but-set-variable] __sysv_write_inode should return 'err' instead of 0 Fixes: 05459ca8 ("repair sysv_write_inode(), switch sysv to simple_fsync()") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Janusz Krzysztofik authored
[ Upstream commit cec83ff1 ] While playing with initialization order of modem device, it has been discovered that under some circumstances (early console init, I believe) its .pm() callback may be called before the uart_port->private_data pointer is initialized from plat_serial8250_port->private_data, resulting in NULL pointer dereference. Fix it by checking for uninitialized pointer before using it in modem_pm(). Fixes: aabf3173 ("ARM: OMAP1: ams-delta: update the modem to use regulator API") Signed-off-by:
Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Adam Ford authored
[ Upstream commit 3d8b804b ] The interrupt on mmc3_dat1 is wrong which prevents this from appearing in /proc/interrupts. Fixes: ab8dd3ae ("ARM: DTS: Add minimal Support for Logic PD DM3730 SOM-LV") #Kernel 4.9+ Signed-off-by:
Adam Ford <aford173@gmail.com> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit c3e43d8b ] We return 0 unconditionally in 'rtw_wx_read32()'. However, 'ret' is set to some error codes in several error handling paths. Return 'ret' instead to propagate the error code. Fixes: 554c0a3a ("staging: Add rtl8723bs sdio wifi driver") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Kuninori Morimoto authored
[ Upstream commit 3ee9a76a ] commit 4d230d12 ("ASoC: rsnd: fixup not to call clk_get/set under non-atomic") fixuped clock start timing. But it exchanged clock start checker from ssi->usrcnt to ssi->rate. Current rsnd_ssi_master_clk_start() is called from .prepare, but some player (for example GStreamer) might calls it many times. In such case, the checker might returns error even though it was not error. It should check ssi->usrcnt instead of ssi->rate. This patch fixup it. Without this patch, GStreamer can't switch 48kHz / 44.1kHz. Reported-by:
Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by:
-
