- 10 May, 2022 1 commit
-
-
Shunsuke Mie authored
This commit fixes the transitional PCI device ID. Fixes: d61914ea ("virtio: update virtio id table, add transitional ids") Signed-off-by:
Shunsuke Mie <mie@igel.co.jp> Link: https://lore.kernel.org/r/20220510102723.87666-1-mie@igel.co.jpSigned-off-by:
Michael S. Tsirkin <mst@redhat.com>
-
- 30 Mar, 2022 4 commits
-
-
Jason Wang authored
Currently, CVQ doesn't have any synchronization with the driver status. Then CVQ emulation code run in the middle of: 1) device reset 2) device status changed 3) map updating The will lead several unexpected issue like trying to execute CVQ command after the driver has been teared down. Fixing this by using reslock to synchronize CVQ emulation code with the driver status changing: - protect the whole device reset, status changing and set_map() updating with reslock - protect the CVQ handler with the reslock and check VIRTIO_CONFIG_S_DRIVER_OK in the CVQ handler This will guarantee that: 1) CVQ handler won't work if VIRTIO_CONFIG_S_DRIVER_OK is not set 2) CVQ handler will see a consistent state of the driver instead of the partial one when it is running in the middle of the teardown_driver() or setup_driver(). Cc: 5262912e ("vdpa/mlx5: Add support for control VQ and MAC setting") Signed-off-by:
Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20220329042109.4029-2-jasowang@redhat.comSigned-off-by:
Eli Cohen <elic@nvidia.com>
-
Jason Wang authored
A userspace triggerable infinite loop could happen in mlx5_cvq_kick_handler() if userspace keeps sending a huge amount of cvq requests. Fixing this by introducing a quota and re-queue the work if we're out of the budget (currently the implicit budget is one) . While at it, using a per device work struct to avoid on demand memory allocation for cvq. Fixes: 5262912e ("vdpa/mlx5: Add support for control VQ and MAC setting") Signed-off-by:
-
Michael S. Tsirkin authored
This reverts commit d50497eb. The new callback ended up not being used, and it's asymmetrical: just enable, no disable. Signed-off-by:
-
Michael S. Tsirkin authored
This reverts commit 8d65bc9a. We reverted the problematic changes, no more need for work arounds on restore. Signed-off-by:
-
- 28 Mar, 2022 33 commits
-
-
Eli Cohen authored
If mlx5_vdpa gets unloaded while a VM is running, the workqueue will be destroyed. However, vhost might still have reference to the kick function and might attempt to push new works. This could lead to null pointer dereference. To fix this, set mvdev->wq to NULL just before destroying and verify that the workqueue is not NULL in mlx5_vdpa_kick_vq before attempting to push a new work. Fixes: 5262912e ("vdpa/mlx5: Add support for control VQ and MAC setting") Signed-off-by:
-
Anirudh Rayabharam authored
vhost_iotlb_add_range_ctx() handles the range [0, ULONG_MAX] by splitting it into two ranges and adding them separately. The return value of adding the first range to the iotlb is currently ignored. Check the return value and bail out in case of an error. Signed-off-by:
Anirudh Rayabharam <mail@anirudhrb.com> Link: https://lore.kernel.org/r/20220312141121.4981-1-mail@anirudhrb.comSigned-off-by:
Stefano Garzarella <sgarzare@redhat.com>
-
Longpeng authored
- GET_VQS_COUNT: the count of virtqueues that exposed Signed-off-by:
Longpeng <longpeng2@huawei.com> Link: https://lore.kernel.org/r/20220315032553.455-4-longpeng2@huawei.comSigned-off-by:
-
Longpeng authored
Change vdpa_device.nvqs and vhost_vdpa.nvqs to use u32 Signed-off-by:
-
Longpeng authored
- GET_CONFIG_SIZE: return the size of the virtio config space. The size contains the fields which are conditional on feature bits. Acked-by:
-
Michael Qiu authored
When MAC Address has been modified in guest, we only re-add the Mac to mpfs, it is not enough, because the guest network will not work correctly: the reply package from outside will go straight away to the host VF net interface. This patch recreate the flow rules, and make it work correctly. Signed-off-by:
Michael Qiu <qiudayu@archeros.com> Link: https://lore.kernel.org/r/1648446492-17614-1-git-send-email-08005325@163.comSigned-off-by:
-
Keir Fraser authored
virtio pci config structures may in future have non-standard bar values in the bar field. We should anticipate this by skipping any structures containing such a reserved value. The bar value should never change: check for harmful modified values we re-read it from the config space in vp_modern_map_capability(). Also clean up an existing check to consistently use PCI_STD_NUM_BARS. Signed-off-by:
Keir Fraser <keirf@google.com> Link: https://lore.kernel.org/r/20220323140727.3499235-1-keirf@google.comSigned-off-by:
-
Jason Wang authored
This reverts commit 9e35276a. Issue were reported for the drivers that are using affinity managed IRQ where manually toggling IRQ status is not expected. And we forget to enable the interrupts in the restore path as well. In the future, we will rework on the interrupt hardening. Fixes: 9e35276a ("virtio_pci: harden MSI-X interrupts") Reported-by:
Marc Zyngier <maz@kernel.org> Reported-by:
-
Jason Wang authored
This reverts commit 080cd7c3. Since the MSI-X interrupts hardening will be reverted in the next patch. We will rework the interrupt hardening in the future. Fixes: 080cd7c3 ("virtio-pci: harden INTX interrupts") Signed-off-by:
-
Andrew Melnychenko authored
Now it's possible to control supported hashflows. Added hashflow set/get callbacks. Also, disabling RXH_IP_SRC/DST for TCP would disable then for UDP. TCP and UDP supports only: ethtool -U eth0 rx-flow-hash tcp4 sd RXH_IP_SRC + RXH_IP_DST ethtool -U eth0 rx-flow-hash tcp4 sdfn RXH_IP_SRC + RXH_IP_DST + RXH_L4_B_0_1 + RXH_L4_B_2_3 Disabling happens because VirtioNET hashtype for IP doesn't check L4 proto, it works for all IP packets(TCP, UDP, ICMP, etc.). For TCP and UDP, it's possible to set IP+PORT hashes. But disabling IP hashes will disable them for TCP and UDP simultaneously. It's possible to set IP+PORT for TCP/UDP and disable/enable IP for everything else(UDP, ICMP, etc.). Signed-off-by:Andrew Melnychenko <andrew@daynix.com> Link: https://lore.kernel.org/r/20220328175336.10802-5-andrew@daynix.comSigned-off-by:
-
Andrew Melnychenko authored
Added features for RSS hash report. If hash is provided - it sets to skb. Added checks if rss and/or hash are enabled together. Signed-off-by:
-
Andrew Melnychenko authored
Added features for RSS. Added initialization, RXHASH feature and ethtool ops. By default RSS/RXHASH is disabled. Virtio RSS "IPv6 extensions" hashes disabled. Added ethtools ops to set key and indirection table. Signed-off-by:
-
Andrew Melnychenko authored
The header v1 provides additional info about RSS. Added changes to computing proper header length. In the next patches, the header may contain RSS hash info for the hash population. Signed-off-by:
-
Stefano Garzarella authored
After waking up a suspended VM, the kernel prints the following trace for virtio drivers which do not directly call virtio_device_ready() in the .restore: PM: suspend exit irq 22: nobody cared (try booting with the "irqpoll" option) Call Trace: <IRQ> dump_stack_lvl+0x38/0x49 dump_stack+0x10/0x12 __report_bad_irq+0x3a/0xaf note_interrupt.cold+0xb/0x60 handle_irq_event+0x71/0x80 handle_fasteoi_irq+0x95/0x1e0 __common_interrupt+0x6b/0x110 common_interrupt+0x63/0xe0 asm_common_interrupt+0x1e/0x40 ? __do_softirq+0x75/0x2f3 irq_exit_rcu+0x93/0xe0 sysvec_apic_timer_interrupt+0xac/0xd0 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x12/0x20 arch_cpu_idle+0x12/0x20 default_idle_call+0x39/0xf0 do_idle+0x1b5/0x210 cpu_startup_entry+0x20/0x30 start_secondary+0xf3/0x100 secondary_startup_64_no_verify+0xc3/0xcb </TASK> handlers: [<000000008f9bac49>] vp_interrupt [<000000008f9bac49>] vp_interrupt Disabling IRQ #22 This happens because we don't invoke .enable_cbs callback in virtio_device_restore(). That callback is used by some transports (e.g. virtio-pci) to enable interrupts. Let's fix it, by calling virtio_device_ready() as we do in virtio_dev_probe(). This function calls .enable_cts callback and sets DRIVER_OK status bit. This fix also avoids setting DRIVER_OK twice for those drivers that call virtio_device_ready() in the .restore. Fixes: d50497eb ("virtio_config: introduce a new .enable_cbs method") Signed-off-by: -
Michael S. Tsirkin authored
When using pthreads, one has to compile and link with -lpthread, otherwise e.g. glibc is not guaranteed to be reentrant. This replaces -lpthread. Reported-by:
Matthew Wilcox <willy@infradead.org> Signed-off-by:
-
Michael S. Tsirkin authored
Signed-off-by: -
Xuan Zhuo authored
When calling vring_unmap_desc_packed(), it will not encounter the situation that the flags contains VRING_DESC_F_INDIRECT. So remove this logic. Signed-off-by:
Xuan Zhuo <xuanzhuo@linux.alibaba.com> Link: https://lore.kernel.org/r/20220224110402.108161-4-xuanzhuo@linux.alibaba.comSigned-off-by:
-
Xuan Zhuo authored
When calling vring_unmap_one_split_indirect(), it will not encounter the situation that the flags contains VRING_DESC_F_INDIRECT. So remove this logic. Signed-off-by:
-
Xuan Zhuo authored
The actual parameter handled by vring_unmap_state_packed() is that vring_desc_extra, so this function should use "extra" instead of "state". Signed-off-by:
-
Eli Cohen authored
Allow an admin creating a vdpa device to specify the max MTU for the net device. For example, to create a device with max MTU of 1000, the following command can be used: $ vdpa dev add name vdpa-a mgmtdev auxiliary/mlx5_core.sf.1 mtu 1000 This configuration mechanism assumes that vdpa is the sole real user of the function. mlx5_core could theoretically change the mtu of the function using the ip command on the mlx5_core net device but this should not be done. Reviewed-by: Si-Wei Liu<si-wei.liu@oracle.com> Signed-off-by:
-
zhenwei pi authored
Suggested by Gonglei, rename virtio_crypto_algs.c to virtio_crypto_skcipher_algs.c. Also minor changes for function name. Thus the function of source files get clear: skcipher services in virtio_crypto_skcipher_algs.c and akcipher services in virtio_crypto_akcipher_algs.c. Signed-off-by:
zhenwei pi <pizhenwei@bytedance.com> Link: https://lore.kernel.org/r/20220302033917.1295334-5-pizhenwei@bytedance.comSigned-off-by:
Gonglei <arei.gonglei@huawei.com>
-
zhenwei pi authored
Support rsa & pkcs1pad(rsa,sha1) with priority 150. Test with QEMU built-in backend, it works fine. 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=226 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 [1 compiling warning during development] Reported-by:
kernel test robot <lkp@intel.com> Co-developed-by:
lei he <helei.sig11@bytedance.com> Signed-off-by:
-
zhenwei pi authored
Introduce asymmetric service definition, asymmetric operations and several well known algorithms. Co-developed-by:
-
zhenwei pi authored
Base on the lastest virtio crypto spec, define VIRTIO_CRYPTO_NOSPC. Reviewed-by:
-
Gautam Dawar authored
This patch adds the definition of VIRTIO_F_IN_ORDER feature bit in the relevant header file to make it available in QEMU's linux standard header file virtio_config.h, which is updated using scripts/update-linux-headers.sh Signed-off-by:
Gautam Dawar <gdawar@xilinx.com> Link: https://lore.kernel.org/r/20220215053430.24650-1-gdawar@xilinx.comSigned-off-by:
-
Miaohe Lin authored
Since commit b1123ea6 ("mm: balloon: use general non-lru movable page feature"), these functions are called via balloon_aops callbacks. They're not called directly outside this file. So make them static and clean up the relevant code. Signed-off-by:
Miaohe Lin <linmiaohe@huawei.com> Link: https://lore.kernel.org/r/20220125132221.2220-1-linmiaohe@huawei.comSigned-off-by:
Muchun Song <songmuchun@bytedance.com>
-
Zhu Lingshan authored
This commit introduces a new cacheline aligned layout for ifcvf_hw. Signed-off-by:
Zhu Lingshan <lingshan.zhu@intel.com> Link: https://lore.kernel.org/r/20220222115428.998334-6-lingshan.zhu@intel.comSigned-off-by:
-
Zhu Lingshan authored
On some platforms/devices, there may not be enough MSI vectors allocated for the virtqueues and config changes. In such a case, the interrupt sources(virtqueues, config changes) must share an IRQ/vector, to avoid initialization failures, keep the device functional. This commit handles three cases: (1) number of the allocated vectors == the number of virtqueues + 1 (config changes), every virtqueue and the config interrupt has a separated vector/IRQ, the best and the most likely case. (2) number of the allocated vectors is less than the best case, but greater than 1. In this case, all virtqueues share a vector/IRQ, the config interrupt has a separated vector/IRQ (3) only one vector is allocated, in this case, the virtqueues and the config interrupt share a vector/IRQ. The worst and most unlikely case. Otherwise, it needs to fail. This commit introduces some helper functions: ifcvf_set_vq_vector() and ifcvf_set_config_vector() sets virtqueue vector and config vector in the device config space, so that the device can send interrupt DMA. Signed-off-by:
Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20220315124130.1710030-1-trix@redhat.comSigned-off-by:
-
Zhu Lingshan authored
This commit implements a MSIX vector allocation helper for vqs and config interrupts. Signed-off-by:
-
Zhu Lingshan authored
When irq number is negative(e.g., -EINVAL), the virtqueue may be disabled or the virtqueues are sharing a device irq. In such case, we should not setup irq offloading for a virtqueue. Signed-off-by:
-
Zhu Lingshan authored
This commit discards ifcvf_ioreadX()/writeX(), use virtio pci modern IO helpers instead Signed-off-by:
-
Stefano Garzarella authored
In vhost_enable_notify() we enable the notifications and we read the avail index to check if new buffers have become available in the meantime. We are not caching the avail index, so when the device will call vhost_get_vq_desc(), it will find the old value in the cache and it will read the avail index again. It would be better to refresh the cache every time we read avail index, so let's change vhost_enable_notify() caching the value in `avail_idx` and compare it with `last_avail_idx` to check if there are new buffers available. We don't expect a significant performance boost because the above path is not very common, indeed vhost_enable_notify() is often called with unlikely(), expecting that avail index has not been updated. We ran virtio-test/vhost-test and noticed minimal improvement as expected. To stress the patch more, we modified vhost_test.ko to call vhost_enable_notify()/vhost_disable_notify() on every cycle when calling vhost_get_vq_desc(); in this case we observed a more evident improvement, with a reduction of the test execution time of about 3.7%. Signed-off-by:
Stefan Hajnoczi <stefanha@redhat.com>
-
Gavin Shan authored
This enables virtio-mem device support by allowing to enable the corresponding kernel config option (CONFIG_VIRTIO_MEM) on the architecture. Signed-off-by:
Gavin Shan <gshan@redhat.com> Acked-by:
David Hildenbrand <david@redhat.com> Acked-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by:
-
- 20 Mar, 2022 2 commits
-
-
Linus Torvalds authored
Signed-off-by:Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fix from Paolo Bonzini: "Fix for the SLS mitigation, which makes a 'SETcc/RET' pair grow to 'SETcc/RET/INT3'. This doesn't fit in 4 bytes any more, so the alignment has to change to 8 for this case" * tag 'for-linus-5.17' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm/emulate: Fix SETcc emulation function offsets with SLS
-
