- 29 Feb, 2016 17 commits
-
-
Peter Zijlstra authored
if (A || B) { } else if (A && !B) { } If A we'll take the first branch, if !A we will not satisfy the second. Therefore the second branch will never be taken. Reported-by:luca abeni <luca.abeni@unitn.it> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by:
Juri Lelli <juri.lelli@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160225140149.GK6357@twins.programming.kicks-ass.netSigned-off-by:
Ingo Molnar <mingo@kernel.org>
-
Sebastian Andrzej Siewior authored
The preempt_disable() invokes preempt_count_add() which saves the caller in ->preempt_disable_ip. It uses CALLER_ADDR1 which does not look for its caller but for the parent of the caller. Which means we get the correct caller for something like spin_lock() unless the architectures inlines those invocations. It is always wrong for preempt_disable() or local_bh_disable(). This patch makes the function get_lock_parent_ip() which tries CALLER_ADDR0,1,2 if the former is a locking function. This seems to record the preempt_disable() caller properly for preempt_disable() itself as well as for get_cpu_var() or local_bh_disable(). Steven asked for the get_parent_ip() -> get_lock_parent_ip() rename. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Rik van Riel authored
When profiling syscall overhead on nohz-full kernels, after removing __acct_update_integrals() from the profile, native_sched_clock() remains as the top CPU user. This can be reduced by moving VIRT_CPU_ACCOUNTING_GEN to jiffy granularity. This will reduce timing accuracy on nohz_full CPUs to jiffy based sampling, just like on normal CPUs. It results in totally removing native_sched_clock from the profile, and significantly speeding up the syscall entry and exit path, as well as irq entry and exit, and KVM guest entry & exit. Additionally, only call the more expensive functions (and advance the seqlock) when jiffies actually changed. This code relies on another CPU advancing jiffies when the system is busy. On a nohz_full system, this is done by a housekeeping CPU. A microbenchmark calling an invalid syscall number 10 million times in a row speeds up an additional 30% over the numbers with just the previous patches, for a total speedup of about 40% over 4.4 and 4.5-rc1. Run times for the microbenchmark: 4.4 3.8 seconds 4.5-rc1 3.7 seconds 4.5-rc1 + first patch 3.3 seconds 4.5-rc1 + first 3 patches 3.1 seconds 4.5-rc1 + all patches 2.3 seconds A non-NOHZ_FULL cpu (not the housekeeping CPU): all kernels 1.86 seconds Signed-off-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: clark@redhat.com Cc: eric.dumazet@gmail.com Cc: fweisbec@gmail.com Cc: luto@amacapital.net Link: http://lkml.kernel.org/r/1455152907-18495-5-git-send-email-riel@redhat.comSigned-off-by:
-
Rik van Riel authored
It looks like all the call paths that lead to __acct_update_integrals() already have irqs disabled, and __acct_update_integrals() does not need to disable irqs itself. This is very convenient since about half the CPU time left in this function was spent in local_irq_save alone. Performance of a microbenchmark that calls an invalid syscall ten million times in a row on a nohz_full CPU improves 21% vs. 4.5-rc1 with both the removal of divisions from __acct_update_integrals() and this patch, with runtime dropping from 3.7 to 2.9 seconds. With these patches applied, the highest remaining cpu user in the trace is native_sched_clock, which is addressed in the next patch. For testing purposes I stuck a WARN_ON(!irqs_disabled()) test in __acct_update_integrals(). It did not trigger. Suggested-by:
-
Rik van Riel authored
Change the indentation in __acct_update_integrals() to make the function a little easier to read. Suggested-by:
Frederic Weisbecker <fweisbec@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: clark@redhat.com Cc: eric.dumazet@gmail.com Cc: fweisbec@gmail.com Cc: luto@amacapital.net Link: http://lkml.kernel.org/r/1455152907-18495-3-git-send-email-riel@redhat.comSigned-off-by:
-
Rik van Riel authored
When running a microbenchmark calling an invalid syscall number in a loop, on a nohz_full CPU, we spend a full 9% of our CPU time in __acct_update_integrals(). This function converts cputime_t to jiffies, to a timeval, only to convert the timeval back to microseconds before discarding it. This patch leaves __acct_update_integrals() functionally equivalent, but speeds things up by about 12%, with 10 million calls to an invalid syscall number dropping from 3.7 to 3.25 seconds. Signed-off-by:
-
Steven Rostedt authored
I've been debugging why deadline tasks can cause the RT scheduler to throttle, even when the deadline tasks are only taking up 50% of the CPU and RT tasks are not even using 1% of the CPU. Here's what I found. In order to keep a CPU from being hogged by RT tasks, the deadline scheduler adds its run time (delta_exec) to the rt_time of the RT bandwidth. That way, if the two use more than 95% of the CPU within one second (default settings), the RT tasks are throttled to allow non RT tasks to run. Although the deadline tasks add their run time to the RT bandwidth, it lets the RT tasks do the accounting. This is where the problem lies. If a deadline task runs for a bit, and no RT tasks are running, then it will continually add to the RT rt_time that is used to calculate how much CPU the RT tasks use. But no RT period is in play, and this accumulation of the runtime never gets reset. When an RT task finally gets to run, and the watchdog goes off, it can see that the RT task has used more than it should of, because the deadline task added all this runtime to its rt_time. Then the RT task that just woke up gets throttled for no good reason. I also noticed that when an RT task is queued, it starts the timer to account for overload and such. But that timer goes off one period later, which may be too late and the extra rt_time will trigger a throttle. This is a quick work around to the problem. When a new RT task is queued, the bandwidth timer is set to go off immediately. Then the timer can clear out the extra time added to the rt_time while there was no RT task running. This stops my tests from triggering the throttle, and it will still throttle if an RT task runs too much, even while a deadline task is running. A better solution may be to subtract the bandwidth that the deadline task uses from the rt_runtime, and add it back when its finished. Then there wont be a need for runtime tracking of the time used by deadline tasks. I may play with that solution tomorrow. Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
Playing with SCHED_DEADLINE and cpusets, I found that I was unable to create new SCHED_DEADLINE tasks, with the error of EBUSY as if the bandwidth was already used up. I then realized there wa no way to see what bandwidth is used by the runqueues to debug the issue. By adding the dl_bw->bw and dl_bw->total_bw to the output of the deadline info in /proc/sched_debug, this allows us to see what bandwidth has been reserved and where a problem may exist. For example, before the issue we see the ratio of the bandwidth: # cat /proc/sys/kernel/sched_rt_runtime_us 950000 # cat /proc/sys/kernel/sched_rt_period_us 1000000 # grep dl /proc/sched_debug dl_rq[0]: .dl_nr_running : 0 .dl_bw->bw : 996147 .dl_bw->total_bw : 0 dl_rq[1]: .dl_nr_running : 0 .dl_bw->bw : 996147 .dl_bw->total_bw : 0 dl_rq[2]: .dl_nr_running : 0 .dl_bw->bw : 996147 .dl_bw->total_bw : 0 dl_rq[3]: .dl_nr_running : 0 .dl_bw->bw : 996147 .dl_bw->total_bw : 0 dl_rq[4]: .dl_nr_running : 0 .dl_bw->bw : 996147 .dl_bw->total_bw : 0 dl_rq[5]: .dl_nr_running : 0 .dl_bw->bw : 996147 .dl_bw->total_bw : 0 dl_rq[6]: .dl_nr_running : 0 .dl_bw->bw : 996147 .dl_bw->total_bw : 0 dl_rq[7]: .dl_nr_running : 0 .dl_bw->bw : 996147 .dl_bw->total_bw : 0 Note: (950000 / 1000000) << 20 == 996147 After I played with cpusets and hit the issue, the result is now: # grep dl /proc/sched_debug dl_rq[0]: .dl_nr_running : 0 .dl_bw->bw : 996147 .dl_bw->total_bw : -104857 dl_rq[1]: .dl_nr_running : 0 .dl_bw->bw : 996147 .dl_bw->total_bw : 104857 dl_rq[2]: .dl_nr_running : 0 .dl_bw->bw : 996147 .dl_bw->total_bw : 104857 dl_rq[3]: .dl_nr_running : 0 .dl_bw->bw : 996147 .dl_bw->total_bw : 104857 dl_rq[4]: .dl_nr_running : 0 .dl_bw->bw : 996147 .dl_bw->total_bw : -104857 dl_rq[5]: .dl_nr_running : 0 .dl_bw->bw : 996147 .dl_bw->total_bw : -104857 dl_rq[6]: .dl_nr_running : 0 .dl_bw->bw : 996147 .dl_bw->total_bw : -104857 dl_rq[7]: .dl_nr_running : 0 .dl_bw->bw : 996147 .dl_bw->total_bw : -104857 This shows that there is definitely a problem as we should never have a negative total bandwidth. Signed-off-by: -
Steven Rostedt (Red Hat) authored
The sched_domain_sysctl setup is only enabled when SCHED_DEBUG is configured. As debug.c is only compiled when SCHED_DEBUG is configured as well, move the setup of sched_domain_sysctl into that file. Note, the (un)register_sched_domain_sysctl() functions had to be changed from static to allow access to them from core.c. Signed-off-by:
-
Steven Rostedt (Red Hat) authored
As /sys/kernel/debug/sched_features is only created when SCHED_DEBUG is enabled, and the file debug.c is only compiled when SCHED_DEBUG is enabled, it makes sense to move sched_feature setup into that file and get rid of the #ifdef. Signed-off-by:
-
Peter Zijlstra authored
Andrea Parri reported: > I found that the following scenario (with CONFIG_RT_GROUP_SCHED=y) is not > handled correctly: > > T1 (prio = 20) > lock(rtmutex); > > T2 (prio = 20) > blocks on rtmutex (rt_nr_boosted = 0 on T1's rq) > > T1 (prio = 20) > sys_set_scheduler(prio = 0) > [new_effective_prio == oldprio] > T1 prio = 20 (rt_nr_boosted = 0 on T1's rq) > > The last step is incorrect as T1 is now boosted (c.f., rt_se_boosted()); > in particular, if we continue with > > T1 (prio = 20) > unlock(rtmutex) > wakeup(T2) > adjust_prio(T1) > [prio != rt_mutex_getprio(T1)] > dequeue(T1) > rt_nr_boosted = (unsigned long)(-1) > ... > T1 prio = 0 > > then we end up leaving rt_nr_boosted in an "inconsistent" state. > > The simple program attached could reproduce the previous scenario; note > that, as a consequence of the presence of this state, the "assertion" > > WARN_ON(!rt_nr_running && rt_nr_boosted) > > from dec_rt_group() may trigger. So normally we dequeue/enqueue tasks in sched_setscheduler(), which would ensure the accounting stays correct. However in the early PI path we fail to do so. So this was introduced at around v3.14, by: c365c292 ("sched: Consider pi boosting in setscheduler()") which fixed another problem exactly because that dequeue/enqueue, joy. Fix this by teaching rt about DEQUEUE_SAVE/ENQUEUE_RESTORE and have it preserve runqueue location with that option. This requires decoupling the on_rt_rq() state from being on the list. In order to allow for explicit movement during the SAVE/RESTORE, introduce {DE,EN}QUEUE_MOVE. We still must use SAVE/RESTORE in these cases to preserve other invariants. Respecting the SAVE/RESTORE flags also has the (nice) side-effect that things like sys_nice()/sys_sched_setaffinity() also do not reorder FIFO tasks (whereas they used to before this patch). Reported-by:
Andrea Parri <parri.andrea@gmail.com> Tested-by:
-
Dongsheng Yang authored
Signed-off-by:
Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Signed-off-by:
-
Frederic Weisbecker authored
Lets factorize a bit of code there. We'll even have a third user soon. While at it, standardize the idle update function name against the others. Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by:
Byungchul Park <byungchul.park@lge.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Christoph Lameter <cl@linux.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul E . McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1452700891-21807-3-git-send-email-fweisbec@gmail.comSigned-off-by:
-
Byungchul Park authored
decay_load_missed() cannot handle nagative values, so we need to prevent using the function with a negative value. Reported-by:
Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by:
-
Ingo Molnar authored
Signed-off-by: -
Peter Zijlstra authored
Steven noticed that occasionally a sched_yield() call would not result in a wait for the next period edge as expected. It turns out that when we call update_curr_dl() and end up with delta_exec <= 0, we will bail early and fail to throttle. Further inspection of the yield code revealed that yield_task_dl() clearing dl.runtime is wrong too, it will not account the last bit of runtime which could result in dl.runtime < 0, which in turn means that replenish would gift us with too much runtime. Fix both issues by not relying on the dl.runtime value for yield. Reported-by:
-
Peter Zijlstra authored
When a cgroup's CPU runqueue is destroyed, it should remove its remaining load accounting from its parent cgroup. The current site for doing so it unsuited because its far too late and unordered against other cgroup removal (->css_free() will be, but we're also in an RCU callback). Put it in the ->css_offline() callback, which is the start of cgroup destruction, right after the group has been made unavailable to userspace. The ->css_offline() callbacks are called in hierarchical order after the following v4.4 commit: aa226ff4 ("cgroup: make sure a parent css isn't offlined before its children") Signed-off-by:
-
- 28 Feb, 2016 15 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Thomas Gleixner: "A rather largish series of 12 patches addressing a maze of race conditions in the perf core code from Peter Zijlstra" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Robustify task_function_call() perf: Fix scaling vs. perf_install_in_context() perf: Fix scaling vs. perf_event_enable() perf: Fix scaling vs. perf_event_enable_on_exec() perf: Fix ctx time tracking by introducing EVENT_TIME perf: Cure event->pending_disable race perf: Fix race between event install and jump_labels perf: Fix cloning perf: Only update context time when active perf: Allow perf_release() with !event->ctx perf: Do not double free perf: Close install vs. exit race
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "This update contains: - Hopefully the last ASM CLAC fixups - A fix for the Quark family related to the IMR lock which makes kexec work again - A off-by-one fix in the MPX code. Ironic, isn't it? - A fix for X86_PAE which addresses once more an unsigned long vs phys_addr_t hickup" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mpx: Fix off-by-one comparison with nr_registers x86/mm: Fix slow_virt_to_phys() for X86_PAE again x86/entry/compat: Add missing CLAC to entry_INT80_32 x86/entry/32: Add an ASM_CLAC to entry_SYSENTER_32 x86/platform/intel/quark: Change the kernel's IMR lock bit to false -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixlet from Thomas Gleixner: "A trivial printk typo fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/deadline: Fix trivial typo in printk() message
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "Four small fixes for irqchip drivers: - Add missing low level irq handler initialization on mxs, so interrupts can acutally be delivered - Add a missing barrier to the GIC driver - Two fixes for the GIC-V3-ITS driver, addressing a double EOI write and a cache flush beyond the actual region" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3: Add missing barrier to 32bit version of gic_read_iar() irqchip/mxs: Add missing set_handle_irq() irqchip/gicv3-its: Avoid cache flush beyond ITS_BASERn memory size irqchip/gic-v3-its: Fix double ICC_EOIR write for LPI in EOImode==1 -
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging/android fix from Greg KH: "Here is one patch, for the android binder driver, to resolve a reported problem. Turns out it has been around for a while (since 3.15), so it is good to finally get it resolved. It has been in linux-next for a while with no reported issues" * tag 'staging-4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: drivers: android: correct the size of struct binder_uintptr_t for BC_DEAD_BINDER_DONE
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are a few USB fixes for 4.5-rc6 They fix a reported bug for some USB 3 devices by reverting the recent patch, a MAINTAINERS change for some drivers, some new device ids, and of course, the usual bunch of USB gadget driver fixes. All have been in linux-next for a while with no reported issues" * tag 'usb-4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: MAINTAINERS: drop OMAP USB and MUSB maintainership usb: musb: fix DMA for host mode usb: phy: msm: Trigger USB state detection work in DRD mode usb: gadget: net2280: fix endpoint max packet for super speed connections usb: gadget: gadgetfs: unregister gadget only if it got successfully registered usb: gadget: remove driver from pending list on probe error Revert "usb: hub: do not clear BOS field during reset device" usb: chipidea: fix return value check in ci_hdrc_pci_probe() usb: chipidea: error on overflow for port_test_write USB: option: add "4G LTE usb-modem U901" USB: cp210x: add IDs for GE B650V3 and B850V3 boards USB: option: add support for SIM7100E usb: musb: Fix DMA desired mode for Mentor DMA engine usb: gadget: fsl_qe_udc: fix IS_ERR_VALUE usage usb: dwc2: USB_DWC2 should depend on HAS_DMA usb: dwc2: host: fix the data toggle error in full speed descriptor dma usb: dwc2: host: fix logical omissions in dwc2_process_non_isoc_desc usb: dwc3: Fix assignment of EP transfer resources usb: dwc2: Add extra delay when forcing dr_mode
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fixes from Al Viro. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: do_last(): ELOOP failure exit should be done after leaving RCU mode should_follow_link(): validate ->d_seq after having decided to follow namei: ->d_inode of a pinned dentry is stable only for positives do_last(): don't let a bogus return value from ->open() et.al. to confuse us fs: return -EOPNOTSUPP if clone is not supported hpfs: don't truncate the file when delete fails
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "We didn't have a batch last week, so this one is slightly larger. None of them are scary though, a handful of fixes for small DT pieces, replacing properties with newer conventions. Highlights: - N900 fix for setting system revision - onenand init fix to avoid filesystem corruption - Clock fix for audio on Beaglebone-x15 - Fixes on shmobile to deal with CONFIG_DEBUG_RODATA (default y in 4.6) + misc smaller stuff" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: MAINTAINERS: Extend info, add wiki and ml for meson arch MAINTAINERS: alpine: add a new maintainer and update the entry ARM: at91/dt: fix typo in sama5d2 pinmux descriptions ARM: OMAP2+: Fix onenand initialization to avoid filesystem corruption Revert "regulator: tps65217: remove tps65217.dtsi file" ARM: shmobile: Remove shmobile_boot_arg ARM: shmobile: Move shmobile_smp_{mpidr, fn, arg}[] from .text to .bss ARM: shmobile: r8a7779: Remove remainings of removed SCU boot setup code ARM: shmobile: Move shmobile_scu_base from .text to .bss ARM: OMAP2+: Fix omap_device for module reload on PM runtime forbid ARM: OMAP2+: Improve omap_device error for driver writers ARM: DTS: am57xx-beagle-x15: Select SYS_CLK2 for audio clocks ARM: dts: am335x/am57xx: replace gpio-key,wakeup with wakeup-source property ARM: OMAP2+: Set system_rev from ATAGS for n900 ARM: dts: orion5x: fix the missing mtd flash on linkstation lswtgl ARM: dts: kirkwood: use unique machine name for ds112 ARM: dts: imx6: remove bogus interrupt-parent from CAAM node
-
Al Viro authored
... or we risk seeing a bogus value of d_is_symlink() there. Cc: stable@vger.kernel.org # v4.2+ Signed-off-by:Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
... otherwise d_is_symlink() above might have nothing to do with the inode value we've got. Cc: stable@vger.kernel.org # v4.2+ Signed-off-by: -
Al Viro authored
both do_last() and walk_component() risk picking a NULL inode out of dentry about to become positive, *then* checking its flags and seeing that it's not negative anymore and using (already stale by then) value they'd fetched earlier. Usually ends up oopsing soon after that... Cc: stable@vger.kernel.org # v3.13+ Signed-off-by: -
Al Viro authored
... into returning a positive to path_openat(), which would interpret that as "symlink had been encountered" and proceed to corrupt memory, etc. It can only happen due to a bug in some ->open() instance or in some LSM hook, etc., so we report any such event *and* make sure it doesn't trick us into further unpleasantness. Cc: stable@vger.kernel.org # v3.6+, at least Signed-off-by: -
Christoph Hellwig authored
-EBADF is a rather confusing error if an operations is not supported, and nfsd gets rather upset about it. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Mikulas Patocka authored
The delete opration can allocate additional space on the HPFS filesystem due to btree split. The HPFS driver checks in advance if there is available space, so that it won't corrupt the btree if we run out of space during splitting. If there is not enough available space, the HPFS driver attempted to truncate the file, but this results in a deadlock since the commit 7dd29d8d ("HPFS: Introduce a global mutex and lock it on every callback from VFS"). This patch removes the code that tries to truncate the file and -ENOSPC is returned instead. If the user hits -ENOSPC on delete, he should try to delete other files (that are stored in a leaf btree node), so that the delete operation will make some space for deleting the file stored in non-leaf btree node. Reported-by:
Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Cc: stable@vger.kernel.org # 2.6.39+ Signed-off-by:
-
- 27 Feb, 2016 8 commits
-
-
Linus Torvalds authored
Merge fixes from Andrew Morton: "10 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: dax: move writeback calls into the filesystems dax: give DAX clearing code correct bdev ext4: online defrag not supported with DAX ext2, ext4: only set S_DAX for regular inodes block: disable block device DAX by default ocfs2: unlock inode if deleting inode from orphan fails mm: ASLR: use get_random_long() drivers: char: random: add get_random_long() mm: numa: quickly fail allocations for NUMA balancing on full nodes mm: thp: fix SMP race condition between THP page fault and MADV_DONTNEED
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext2/4 DAX fix from Ted Ts'o: "This fixes a file system corruption bug with DAX" * tag 'tags/ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext2, ext4: fix issue with missing journal entry in ext4_dax_mkwrite()
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fixes from Bjorn Helgaas: "Enumeration: Revert x86 pcibios_alloc_irq() to fix regression (Bjorn Helgaas) Marvell MVEBU host bridge driver: Restrict build to 32-bit ARM (Thierry Reding)" * tag 'pci-v4.5-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: mvebu: Restrict build to 32-bit ARM Revert "PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()" Revert "PCI: Add helpers to manage pci_dev->irq and pci_dev->irq_managed" Revert "x86/PCI: Don't alloc pcibios-irq when MSI is enabled" -
Ross Zwisler authored
As it is currently written ext4_dax_mkwrite() assumes that the call into __dax_mkwrite() will not have to do a block allocation so it doesn't create a journal entry. For a read that creates a zero page to cover a hole followed by a write that actually allocates storage this is incorrect. The ext4_dax_mkwrite() -> __dax_mkwrite() -> __dax_fault() path calls get_blocks() to allocate storage. Fix this by having the ->page_mkwrite fault handler call ext4_dax_fault() as this function already has all the logic needed to allocate a journal entry and call __dax_fault(). Also update the ext2 fault handlers in this same way to remove duplicate code and keep the logic between ext2 and ext4 the same. Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fix from Stephen Boyd: "One small fix to keep OMAP platforms working across a suspend/resume cycle" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: ti: omap3+: dpll: use non-locking version of clk_get_rate
-
Ross Zwisler authored
Previously calls to dax_writeback_mapping_range() for all DAX filesystems (ext2, ext4 & xfs) were centralized in filemap_write_and_wait_range(). dax_writeback_mapping_range() needs a struct block_device, and it used to get that from inode->i_sb->s_bdev. This is correct for normal inodes mounted on ext2, ext4 and XFS filesystems, but is incorrect for DAX raw block devices and for XFS real-time files. Instead, call dax_writeback_mapping_range() directly from the filesystem ->writepages function so that it can supply us with a valid block device. This also fixes DAX code to properly flush caches in response to sync(2). Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Ross Zwisler authored
dax_clear_blocks() needs a valid struct block_device and previously it was using inode->i_sb->s_bdev in all cases. This is correct for normal inodes on mounted ext2, ext4 and XFS filesystems, but is incorrect for DAX raw block devices and for XFS real-time devices. Instead, rename dax_clear_blocks() to dax_clear_sectors(), and change its arguments to take a bdev and a sector instead of an inode and a block. This better reflects what the function does, and it allows the filesystem and raw block device code to pass in an appropriate struct block_device. Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Reviewed-by:
-
Ross Zwisler authored
Online defrag operations for ext4 are hard coded to use the page cache. See ext4_ioctl() -> ext4_move_extents() -> move_extent_per_page() When combined with DAX I/O, which circumvents the page cache, this can result in data corruption. This was observed with xfstests ext4/307 and ext4/308. Fix this by only allowing online defrag for non-DAX files. Signed-off-by:
-
