1. 14 Nov, 2016 28 commits
    • Bartlomiej Zolnierkiewicz's avatar
      powerpc: convert cell_defconfig to use libata PATA drivers · 8020c122
      Bartlomiej Zolnierkiewicz authored
      IDE subsystem has been deprecated since 2009 and the majority
      (if not all) of Linux distributions have switched to use
      libata for ATA support exclusively.  However there are still
      some users (mostly old or/and embedded non-x86 systems) that
      have not converted from using IDE subsystem to libata PATA
      drivers.  This doesn't seem to be good thing in the long-term
      for Linux as while there is less and less PATA systems left
      in use:
      
      * testing efforts are divided between two subsystems
      
      * having duplicate drivers for same hardware confuses users
      
      This patch converts cell_defconfig to use libata PATA drivers.
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
      8020c122
    • Bartlomiej Zolnierkiewicz's avatar
      powerpc: convert amigaone_defconfig to use libata PATA drivers · 67f6d665
      Bartlomiej Zolnierkiewicz authored
      IDE subsystem has been deprecated since 2009 and the majority
      (if not all) of Linux distributions have switched to use
      libata for ATA support exclusively.  However there are still
      some users (mostly old or/and embedded non-x86 systems) that
      have not converted from using IDE subsystem to libata PATA
      drivers.  This doesn't seem to be good thing in the long-term
      for Linux as while there is less and less PATA systems left
      in use:
      
      * testing efforts are divided between two subsystems
      
      * having duplicate drivers for same hardware confuses users
      
      This patch converts amigaone_defconfig to use libata PATA
      drivers.
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
      67f6d665
    • Peter Senna Tschudin's avatar
      selftests/powerpc: Return false instead of -1 in require_paranoia_below() · 0e27d27e
      Peter Senna Tschudin authored
      Returning a negative value for a boolean function seem to have the
      undesired effect of returning true. require_paranoia_below() is a
      boolean function, but the variable used to store the return value is an
      integer, receiving -1 or 0. This patch converts rc to bool, replaces -1
      by false, and 0 by true.
      
      mpe: This wasn't exhibiting in practice because the common case, where
      we do the comparison of the desired level vs the current value, was
      being compiled into a computation based on the result of the comparison,
      ie. it wasn't using the default -1 value at all. However that was just
      luck and the code is still wrong.
      Signed-off-by: default avatarPeter Senna Tschudin <peter.senna@gmail.com>
      Signed-off-by: default avatarAndrew Shadura <andrew.shadura@collabora.co.uk>
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      0e27d27e
    • Johan Hovold's avatar
      powerpc/pci/rpadlpar: Fix device reference leaks · 99e5cde5
      Johan Hovold authored
      Make sure to drop any device reference taken by vio_find_node() when
      adding and removing virtual I/O slots.
      
      Fixes: 5eeb8c63 ("[PATCH] PCI Hotplug: rpaphp: Move VIO registration")
      Signed-off-by: default avatarJohan Hovold <johan@kernel.org>
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      99e5cde5
    • Johan Hovold's avatar
      powerpc/vio: Clarify vio_find_node() reference counting · e8cfb7e7
      Johan Hovold authored
      Add comment clarifying that vio_find_node() takes a reference to the
      embedded struct device which needs to be dropped after use.
      Signed-off-by: default avatarJohan Hovold <johan@kernel.org>
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      e8cfb7e7
    • Johan Hovold's avatar
      powerpc/ibmebus: Fix further device reference leaks · 815a7141
      Johan Hovold authored
      Make sure to drop any reference taken by bus_find_device() when creating
      devices during init and driver registration.
      
      Fixes: 55347cc9 ("[POWERPC] ibmebus: Add device creation and bus probing based on of_device")
      Signed-off-by: default avatarJohan Hovold <johan@kernel.org>
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      815a7141
    • Johan Hovold's avatar
      powerpc/ibmebus: Fix device reference leaks in sysfs interface · fe0f3168
      Johan Hovold authored
      Make sure to drop any reference taken by bus_find_device() in the sysfs
      callbacks that are used to create and destroy devices based on
      device-tree entries.
      
      Fixes: 6bccf755 ("[POWERPC] ibmebus: dynamic addition/removal of adapters, some code cleanup")
      Signed-off-by: default avatarJohan Hovold <johan@kernel.org>
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      fe0f3168
    • Jack Miller's avatar
      powerpc/powernv: Simplify searching for compatible device nodes · 9e4f51bd
      Jack Miller authored
      This condenses the opal node searching into a single function that finds
      all compatible nodes, instead of just searching the ibm,opal children,
      for ipmi, flash, and prd similar to how opal-i2c nodes are found.
      Signed-off-by: default avatarJack Miller <jack@codezen.org>
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      9e4f51bd
    • Michael Neuling's avatar
      powerpc: Revert Load Monitor Register Support · 29a969b7
      Michael Neuling authored
      Load monitored is no longer supported on POWER9 so let's remove the
      code.
      
      This reverts commit bd3ea317 ("powerpc: Load Monitor Register
      Support").
      Signed-off-by: default avatarMichael Neuling <mikey@neuling.org>
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      29a969b7
    • Michael Neuling's avatar
      selftests/powerpc: Revert Load Monitor Register Tests · 7c65856b
      Michael Neuling authored
      Load monitored won't be supported in POWER9, so PPC_FEATURE2_ARCH_3_00
      (in HWCAP2) will no longer imply Load monitor support.
      
      These Load monitored tests are enabled by PPC_FEATURE2_ARCH_3_00 so
      they are now bogus and need to be removed.
      
      This reverts commit 16c19a2e ("selftests/powerpc: Load Monitor
      Register Tests").
      Signed-off-by: default avatarMichael Neuling <mikey@neuling.org>
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      7c65856b
    • Michael Ellerman's avatar
      powerpc/configs: Drop REISERFS from pseries & powernv · 7a53ef5e
      Michael Ellerman authored
      No one uses reiserfs much these days, or is likely to in future. So drop
      it from pseries and powernv defconfigs to save time and space. It's
      still enabled in ppc64_defconfig so we get some build coverage.
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      7a53ef5e
    • Elimar Riesebieter's avatar
      macintosh: Remove dependency on IDE_GD_ATA if ADB_PMU_LED_DISK is selected · 0e865a80
      Elimar Riesebieter authored
      We can use the front led of powerbooks/ibooks to visualize disk activity
      without the deprecated IDE_GD_ATA.
      Signed-off-by: default avatarElimar Riesebieter <riesebie@lxtec.de>
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      0e865a80
    • Balbir Singh's avatar
      powerpc/hash64: Be more careful when generating tlbiel · f923efbc
      Balbir Singh authored
      In ISA v2.05, the tlbiel instruction takes two arguments, RB and L:
      
      tlbiel RB,L
      
      +---------+---------+----+---------+---------+---------+----+
      |    31   |    /    | L  |    /    |    RB   |   274   | /  |
      | 31 - 26 | 25 - 22 | 21 | 20 - 16 | 15 - 11 |  10 - 1 | 0  |
      +---------+---------+----+---------+---------+---------+----+
      
      In ISA v2.06 tlbiel takes only one argument, RB:
      
      tlbiel RB
      
      +---------+---------+---------+---------+---------+----+
      |    31   |    /    |    /    |    RB   |   274   | /  |
      | 31 - 26 | 25 - 21 | 20 - 16 | 15 - 11 |  10 - 1 | 0  |
      +---------+---------+---------+---------+---------+----+
      
      And in ISA v3.00 tlbiel takes five arguments:
      
      tlbiel RB,RS,RIC,PRS,R
      
      +---------+---------+----+---------+----+----+---------+---------+----+
      |    31   |    RS   | /  |   RIC   |PRS | R  |    RB   |   274   | /  |
      | 31 - 26 | 25 - 21 | 20 | 19 - 18 | 17 | 16 | 15 - 11 |  10 - 1 | 0  |
      +---------+---------+----+---------+----+----+---------+---------+----+
      
      However the assembler also accepts "tlbiel RB", and generates
      "tlbiel RB,r0,0,0,0".
      
      As you can see above the L field from the v2.05 encoding overlaps with the
      reserved field of the v2.06 encoding, and the low bit of the RS field of the
      v3.00 encoding.
      
      Currently in __tlbiel() we generate two tlbiel instructions manually using hex
      constants. In the first case, for MMU_PAGE_4K, we generate "tlbiel RB,0", which
      is safe in all cases, because the L bit is zero.
      
      However in the default case we generate "tlbiel RB,1", therefore setting bit 21
      to 1.
      
      This is not an actual bug on v2.06 processors, because the CPU ignores the value
      of the reserved field. However software is supposed to encode the reserved
      fields as zero to enable forward compatibility.
      
      On v3.00 processors setting bit 21 to 1 and no other bits of RS, means we are
      using r1 for the value of RS.
      
      Although it's not obvious, the code sets the IS field (bits 10-11) to 0 (by
      omission), and L=1, in the va value, which is passed as RB. We also pass R=0 in
      the instruction.
      
      The combination of IS=0, L=1 and R=0 means the value of RS is not used, so even
      on ISA v3.00 there is no actual bug.
      
      We should still fix it, as setting a reserved bit on v2.06 is naughty, and we
      are only avoiding a bug on v3.00 by accident rather than design. Use
      ASM_FTR_IFSET() to generate the single argument form on ISA v2.06 and later, and
      the two argument form on pre v2.06.
      
      Although there may be very old toolchains which don't understand tlbiel, we have
      other code in the tree which has been using tlbiel for over five years, and no
      one has reported any build failures, so just let the assembler generate the
      instructions.
      Signed-off-by: default avatarBalbir Singh <bsingharora@gmail.com>
      [mpe: Rewrite change log, use IFSET instead of IFCLR]
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      f923efbc
    • Michael Ellerman's avatar
      powerpc/book3s64: Always build for power4 or later · 3a849815
      Michael Ellerman authored
      When we're not compiling for a specific CPU, ie. none of the
      CONFIG_POWERx_CPU options are set, and CONFIG_GENERIC_CPU *is* set, we
      currently don't pass any -mcpu option to the compiler. This means the
      compiler builds for a "generic" Power CPU.
      
      But back in 2014 we dropped support for pre power4 CPUs in commit
      468a3302 ("powerpc: Drop support for pre-POWER4 cpus").
      
      Given that, there's no point in building the kernel to run on pre power4
      cpus. So update the flags we pass to the compiler when
      CONFIG_GENERIC_CPU is set, to specify -mcpu=power4.
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      3a849815
    • Nicholas Piggin's avatar
      powerpc/64: Add an option to force run-at-load to test relocation · 70839d20
      Nicholas Piggin authored
      This adds a config option that can help exercise the case when
      the kernel is not running at PAGE_OFFSET.
      Signed-off-by: default avatarNicholas Piggin <npiggin@gmail.com>
      Reviewed-by: default avatarBalbir Singh <bsingharora@gmail.com>
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      70839d20
    • Anton Blanchard's avatar
      powerpc/pseries: Use H_CLEAR_HPT to clear MMU hash table during kexec · 5246adec
      Anton Blanchard authored
      An hcall was recently added that does exactly what we need during kexec
      - it clears the entire MMU hash table, ignoring any VRMA mappings.
      
      Try it and fall back to the old method if we get a failure.
      
      On a POWER8 box with 5TB of memory, this reduces the time it takes to
      kexec a new kernel from from 4 minutes to 1 minute.
      Signed-off-by: default avatarAnton Blanchard <anton@samba.org>
      Tested-by: default avatarMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
      [mpe: Split into separate functions and tweak function naming]
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      5246adec
    • Denis Kirjanov's avatar
      i2c_powermac: shut up lockdep warning · 9e607f72
      Denis Kirjanov authored
      That's unclear why lockdep shows the following warning but adding a
      lockdep class to struct pmac_i2c_bus solves it
      
      [   20.507795] ======================================================
      [   20.507796] [ INFO: possible circular locking dependency detected ]
      [   20.507800] 4.8.0-rc7-00037-gd2ffb010 #21 Not tainted
      [   20.507801] -------------------------------------------------------
      [   20.507803] swapper/0/1 is trying to acquire lock:
      [   20.507818]  (&bus->mutex){+.+.+.}, at: [<c000000000052830>] .pmac_i2c_open+0x30/0x100
      [   20.507819]
      [   20.507819] but task is already holding lock:
      [   20.507829]  (&policy->rwsem){+.+.+.}, at: [<c00000000068adcc>] .cpufreq_online+0x1ac/0x9d0
      [   20.507830]
      [   20.507830] which lock already depends on the new lock.
      [   20.507830]
      [   20.507832]
      [   20.507832] the existing dependency chain (in reverse order) is:
      [   20.507837]
      [   20.507837] -> #4 (&policy->rwsem){+.+.+.}:
      [   20.507844]        [<c00000000082385c>] .down_write+0x6c/0x110
      [   20.507849]        [<c00000000068adcc>] .cpufreq_online+0x1ac/0x9d0
      [   20.507855]        [<c0000000004d76d8>] .subsys_interface_register+0xb8/0x110
      [   20.507860]        [<c000000000689bb0>] .cpufreq_register_driver+0x1d0/0x250
      [   20.507866]        [<c000000000b4f8f4>] .g5_cpufreq_init+0x9cc/0xa28
      [   20.507872]        [<c00000000000a98c>] .do_one_initcall+0x5c/0x1d0
      [   20.507878]        [<c000000000b0f86c>] .kernel_init_freeable+0x1ac/0x28c
      [   20.507883]        [<c00000000000b3bc>] .kernel_init+0x1c/0x140
      [   20.507887]        [<c0000000000098f4>] .ret_from_kernel_thread+0x58/0x64
      [   20.507894]
      [   20.507894] -> #3 (subsys mutex#2){+.+.+.}:
      [   20.507899]        [<c000000000820448>] .mutex_lock_nested+0xa8/0x590
      [   20.507903]        [<c0000000004d7f24>] .bus_probe_device+0x44/0xe0
      [   20.507907]        [<c0000000004d5208>] .device_add+0x508/0x730
      [   20.507911]        [<c0000000004dd528>] .register_cpu+0x118/0x190
      [   20.507916]        [<c000000000b14450>] .topology_init+0x148/0x248
      [   20.507921]        [<c00000000000a98c>] .do_one_initcall+0x5c/0x1d0
      [   20.507925]        [<c000000000b0f86c>] .kernel_init_freeable+0x1ac/0x28c
      [   20.507929]        [<c00000000000b3bc>] .kernel_init+0x1c/0x140
      [   20.507934]        [<c0000000000098f4>] .ret_from_kernel_thread+0x58/0x64
      [   20.507939]
      [   20.507939] -> #2 (cpu_add_remove_lock){+.+.+.}:
      [   20.507944]        [<c000000000820448>] .mutex_lock_nested+0xa8/0x590
      [   20.507950]        [<c000000000087a9c>] .register_cpu_notifier+0x2c/0x70
      [   20.507955]        [<c000000000b267e0>] .spawn_ksoftirqd+0x18/0x4c
      [   20.507959]        [<c00000000000a98c>] .do_one_initcall+0x5c/0x1d0
      [   20.507964]        [<c000000000b0f770>] .kernel_init_freeable+0xb0/0x28c
      [   20.507968]        [<c00000000000b3bc>] .kernel_init+0x1c/0x140
      [   20.507972]        [<c0000000000098f4>] .ret_from_kernel_thread+0x58/0x64
      [   20.507978]
      [   20.507978] -> #1 (&host->mutex){+.+.+.}:
      [   20.507982]        [<c000000000820448>] .mutex_lock_nested+0xa8/0x590
      [   20.507987]        [<c0000000000527e8>] .kw_i2c_open+0x18/0x30
      [   20.507991]        [<c000000000052894>] .pmac_i2c_open+0x94/0x100
      [   20.507995]        [<c000000000b220a0>] .smp_core99_probe+0x260/0x410
      [   20.507999]        [<c000000000b185bc>] .smp_prepare_cpus+0x280/0x2ac
      [   20.508003]        [<c000000000b0f748>] .kernel_init_freeable+0x88/0x28c
      [   20.508008]        [<c00000000000b3bc>] .kernel_init+0x1c/0x140
      [   20.508012]        [<c0000000000098f4>] .ret_from_kernel_thread+0x58/0x64
      [   20.508018]
      [   20.508018] -> #0 (&bus->mutex){+.+.+.}:
      [   20.508023]        [<c0000000000ed5b4>] .lock_acquire+0x84/0x100
      [   20.508027]        [<c000000000820448>] .mutex_lock_nested+0xa8/0x590
      [   20.508032]        [<c000000000052830>] .pmac_i2c_open+0x30/0x100
      [   20.508037]        [<c000000000052e14>] .pmac_i2c_do_begin+0x34/0x120
      [   20.508040]        [<c000000000056bc0>] .pmf_call_one+0x50/0xd0
      [   20.508045]        [<c00000000068ff1c>] .g5_pfunc_switch_volt+0x2c/0xc0
      [   20.508050]        [<c00000000068fecc>] .g5_pfunc_switch_freq+0x1cc/0x1f0
      [   20.508054]        [<c00000000068fc2c>] .g5_cpufreq_target+0x2c/0x40
      [   20.508058]        [<c0000000006873ec>] .__cpufreq_driver_target+0x23c/0x840
      [   20.508062]        [<c00000000068c798>] .cpufreq_gov_performance_limits+0x18/0x30
      [   20.508067]        [<c00000000068915c>] .cpufreq_start_governor+0xac/0x100
      [   20.508071]        [<c00000000068a788>] .cpufreq_set_policy+0x208/0x260
      [   20.508076]        [<c00000000068abdc>] .cpufreq_init_policy+0x6c/0xb0
      [   20.508081]        [<c00000000068ae70>] .cpufreq_online+0x250/0x9d0
      [   20.508085]        [<c0000000004d76d8>] .subsys_interface_register+0xb8/0x110
      [   20.508090]        [<c000000000689bb0>] .cpufreq_register_driver+0x1d0/0x250
      [   20.508094]        [<c000000000b4f8f4>] .g5_cpufreq_init+0x9cc/0xa28
      [   20.508099]        [<c00000000000a98c>] .do_one_initcall+0x5c/0x1d0
      [   20.508103]        [<c000000000b0f86c>] .kernel_init_freeable+0x1ac/0x28c
      [   20.508107]        [<c00000000000b3bc>] .kernel_init+0x1c/0x140
      [   20.508112]        [<c0000000000098f4>] .ret_from_kernel_thread+0x58/0x64
      [   20.508113]
      [   20.508113] other info that might help us debug this:
      [   20.508113]
      [   20.508121] Chain exists of:
      [   20.508121]   &bus->mutex --> subsys mutex#2 --> &policy->rwsem
      [   20.508121]
      [   20.508123]  Possible unsafe locking scenario:
      [   20.508123]
      [   20.508124]        CPU0                    CPU1
      [   20.508125]        ----                    ----
      [   20.508128]   lock(&policy->rwsem);
      [   20.508132]                                lock(subsys mutex#2);
      [   20.508135]                                lock(&policy->rwsem);
      [   20.508138]   lock(&bus->mutex);
      [   20.508139]
      [   20.508139]  *** DEADLOCK ***
      [   20.508139]
      [   20.508141] 3 locks held by swapper/0/1:
      [   20.508150]  #0:  (cpu_hotplug.lock){++++++}, at: [<c000000000087838>] .get_online_cpus+0x48/0xc0
      [   20.508159]  #1:  (subsys mutex#2){+.+.+.}, at: [<c0000000004d7670>] .subsys_interface_register+0x50/0x110
      [   20.508168]  #2:  (&policy->rwsem){+.+.+.}, at: [<c00000000068adcc>] .cpufreq_online+0x1ac/0x9d0
      [   20.508169]
      [   20.508169] stack backtrace:
      [   20.508173] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.8.0-rc7-00037-gd2ffb010 #21
      [   20.508175] Call Trace:
      [   20.508180] [c0000000790c2b90] [c00000000082cc70] .dump_stack+0xe0/0x14c (unreliable)
      [   20.508184] [c0000000790c2c20] [c000000000828c88] .print_circular_bug+0x350/0x388
      [   20.508188] [c0000000790c2cd0] [c0000000000ecb0c] .__lock_acquire+0x196c/0x1d30
      [   20.508192] [c0000000790c2e50] [c0000000000ed5b4] .lock_acquire+0x84/0x100
      [   20.508196] [c0000000790c2f20] [c000000000820448] .mutex_lock_nested+0xa8/0x590
      [   20.508201] [c0000000790c3030] [c000000000052830] .pmac_i2c_open+0x30/0x100
      [   20.508206] [c0000000790c30c0] [c000000000052e14] .pmac_i2c_do_begin+0x34/0x120
      [   20.508209] [c0000000790c3150] [c000000000056bc0] .pmf_call_one+0x50/0xd0
      [   20.508213] [c0000000790c31e0] [c00000000068ff1c] .g5_pfunc_switch_volt+0x2c/0xc0
      [   20.508217] [c0000000790c3250] [c00000000068fecc] .g5_pfunc_switch_freq+0x1cc/0x1f0
      [   20.508221] [c0000000790c3320] [c00000000068fc2c] .g5_cpufreq_target+0x2c/0x40
      [   20.508226] [c0000000790c3390] [c0000000006873ec] .__cpufreq_driver_target+0x23c/0x840
      [   20.508230] [c0000000790c3440] [c00000000068c798] .cpufreq_gov_performance_limits+0x18/0x30
      [   20.508235] [c0000000790c34b0] [c00000000068915c] .cpufreq_start_governor+0xac/0x100
      [   20.508239] [c0000000790c3530] [c00000000068a788] .cpufreq_set_policy+0x208/0x260
      [   20.508244] [c0000000790c35d0] [c00000000068abdc] .cpufreq_init_policy+0x6c/0xb0
      [   20.508249] [c0000000790c3940] [c00000000068ae70] .cpufreq_online+0x250/0x9d0
      [   20.508253] [c0000000790c3a30] [c0000000004d76d8] .subsys_interface_register+0xb8/0x110
      [   20.508258] [c0000000790c3ad0] [c000000000689bb0] .cpufreq_register_driver+0x1d0/0x250
      [   20.508262] [c0000000790c3b60] [c000000000b4f8f4] .g5_cpufreq_init+0x9cc/0xa28
      [   20.508267] [c0000000790c3c20] [c00000000000a98c] .do_one_initcall+0x5c/0x1d0
      [   20.508271] [c0000000790c3d00] [c000000000b0f86c] .kernel_init_freeable+0x1ac/0x28c
      [   20.508276] [c0000000790c3db0] [c00000000000b3bc] .kernel_init+0x1c/0x140
      [   20.508280] [c0000000790c3e30] [c0000000000098f4] .ret_from_kernel_thread+0x58/0x64
      Signed-off-by: default avatarDenis Kirjanov <kda@linux-powerpc.org>
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      9e607f72
    • Nicholas Piggin's avatar
    • Nicholas Piggin's avatar
      5b9ff027
    • Nicholas Piggin's avatar
      powerpc: Add support for relative exception tables · 61a92f70
      Nicholas Piggin authored
      This halves the exception table size on 64-bit builds, and it allows
      build-time sorting of exception tables to work on relocated kernels.
      Signed-off-by: default avatarNicholas Piggin <npiggin@gmail.com>
      [mpe: Minor asm fixups and bits to keep the selftests working]
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      61a92f70
    • Nicholas Piggin's avatar
      powerpc: EX_TABLE macro for exception tables · 24bfa6a9
      Nicholas Piggin authored
      This macro is taken from s390, and allows more flexibility in
      changing exception table format.
      
      mpe: Put it in ppc_asm.h and only define one version using
      stringinfy_in_c(). Add some empty definitions and headers to keep the
      selftests happy.
      Signed-off-by: default avatarNicholas Piggin <npiggin@gmail.com>
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      24bfa6a9
    • Michael Ellerman's avatar
      selftests/powerpc: Fail load_unaligned_zeropad on miscompare · 997e2001
      Michael Ellerman authored
      If the result returned by load_unaligned_zeropad() doesn't match what we
      expect we should fail the test!
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      997e2001
    • Michael Ellerman's avatar
      selftests/powerpc: Abort load_unaligned_zeropad on unhandled SEGV · 06236f4e
      Michael Ellerman authored
      If the load unaligned zeropad test takes a SEGV which can't be handled,
      we increment segv_error, print the offending NIP and then return without
      taking any further action. In almost all cases this means we'll just
      take the SEGV again, and loop eternally spamming the console.
      
      Instead just abort(), it's a fatal error in the test. The test harness
      will notice that the child died and print a nice message for us.
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      06236f4e
    • Michael Ellerman's avatar
      powerpc/module: Add support for R_PPC64_REL32 relocations · 9f751b82
      Michael Ellerman authored
      We haven't seen these before, but the soon to be merged relative
      exception tables support causes them to be generated.
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      9f751b82
    • Michael Ellerman's avatar
      powerpc/asm: Allow including ppc_asm.h in asm files · e3f2c6c3
      Michael Ellerman authored
      There's no reason to #error if we include ppc_asm.h in asm files, the
      ifdef already prevents any problems.
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      e3f2c6c3
    • Nicholas Piggin's avatar
      powerpc/64s: Reduce exception alignment · f4329f2e
      Nicholas Piggin authored
      Exception handlers are aligned to 128 bytes (L1 cache) on 64s, which is
      overkill. It can reduce the icache footprint of any individual exception
      path. However taken as a whole, the expansion in icache footprint seems
      likely to be counter-productive and cause more total misses.
      
      Create IFETCH_ALIGN_SHIFT/BYTES, which should give optimal ifetch
      alignment with much more reasonable alignment. This saves 1792 bytes
      from head_64.o text with an allmodconfig build.
      
      Other subarchitectures should define appropriate IFETCH_ALIGN_SHIFT
      values if this becomes more widely used.
      Signed-off-by: default avatarNicholas Piggin <npiggin@gmail.com>
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      f4329f2e
    • Rui Teng's avatar
      powerpc: Remove suspect CONFIG_PPC_BOOK3E #ifdefs in nohash/64/pgtable.h · fda0440d
      Rui Teng authored
      There are three #ifdef CONFIG_PPC_BOOK3E sections in nohash/64/pgtable.h.
      And there should be no configurations possible which use nohash/64/pgtable.h
      but don't also enable CONFIG_PPC_BOOK3E.
      Suggested-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      Signed-off-by: default avatarRui Teng <rui.teng@linux.vnet.ibm.com>
      Reviewed-by: default avatarAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      fda0440d
    • Anton Blanchard's avatar
  2. 13 Nov, 2016 12 commits
    • Linus Torvalds's avatar
      Linux 4.9-rc5 · a25f0944
      Linus Torvalds authored
      a25f0944
    • Linus Torvalds's avatar
      Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm · e234832a
      Linus Torvalds authored
      Pull KVM fixes from Paolo Bonzini:
       "ARM fixes.  There are a couple pending x86 patches but they'll have to
        wait for next week"
      
      * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
        KVM: arm/arm64: vgic: Kick VCPUs when queueing already pending IRQs
        KVM: arm/arm64: vgic: Prevent access to invalid SPIs
        arm/arm64: KVM: Perform local TLB invalidation when multiplexing vcpus on a single CPU
      e234832a
    • Linus Torvalds's avatar
      Merge branch 'media-fixes' (patches from Mauro) · e861d890
      Linus Torvalds authored
      Merge media fixes from Mauro Carvalho Chehab:
       "This contains two patches fixing problems with my patch series meant
        to make USB drivers to work again after the DMA on stack changes.
      
        The last patch on this series is actually not related to DMA on stack.
        It solves a longstanding bug affecting module unload, causing
        module_put() to be called twice. It was reported by the user who
        reported and tested the issues with the gp8psk driver with the DMA
        fixup patches. As we're late at -rc cycle, maybe you prefer to not
        apply it right now. If this is the case, I'll add to the pile of
        patches for 4.10.
      
        Exceptionally this time, I'm sending the patches via e-mail, because
        I'm on another trip, and won't be able to use the usual procedure
        until Monday. Also, it is only three patches, and you followed already
        the discussions about the first one"
      
      * emailed patches from Mauro Carvalho Chehab <mchehab@osg.samsung.com>:
        gp8psk: Fix DVB frontend attach
        gp8psk: fix gp8psk_usb_in_op() logic
        dvb-usb: move data_mutex to struct dvb_usb_device
      e861d890
    • Linus Torvalds's avatar
      Merge tag 'char-misc-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc · acb57b75
      Linus Torvalds authored
      Pull char/misc fixes from Greg KH:
       "Here are three small driver fixes for some reported issues for
        4.9-rc5.
      
        One for the hyper-v subsystem, fixing up a naming issue that showed up
        in 4.9-rc1, one mei driver fix, and one fix for parallel ports,
        resolving a reported regression.
      
        All have been in linux-next with no reported issues"
      
      * tag 'char-misc-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
        ppdev: fix double-free of pp->pdev->name
        vmbus: make sysfs names consistent with PCI
        mei: bus: fix received data size check in NFC fixup
      acb57b75
    • Linus Torvalds's avatar
      Merge tag 'driver-core-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core · cf2b191c
      Linus Torvalds authored
      Pull driver core fixes from Greg KH:
       "Here are two driver core fixes for 4.9-rc5.
      
        The first resolves an issue with some drivers not liking to be unbound
        and bound again (if CONFIG_DEBUG_TEST_DRIVER_REMOVE is enabled), which
        solves some reported problems with graphics and storage drivers. The
        other resolves a smatch error with the 4.9-rc1 driver core changes
        around this feature.
      
        Both have been in linux-next with no reported issues"
      
      * tag 'driver-core-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
        driver core: fix smatch warning on dev->bus check
        driver core: skip removal test for non-removable drivers
      cf2b191c
    • Linus Torvalds's avatar
      Merge tag 'staging-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging · 85b9df7a
      Linus Torvalds authored
      Pull staging/IIO fixes from Grek KH:
       "Here are a few small staging and iio driver fixes for reported issues.
      
        The last one was cherry-picked from my -next branch to resolve a build
        warning that Arnd fixed, in his quest to be able to turn
        -Wmaybe-uninitialized back on again. That patch, and all of the
        others, have been in linux-next for a while with no reported issues"
      
      * tag 'staging-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
        iio: maxim_thermocouple: detect invalid storage size in read()
        staging: nvec: remove managed resource from PS2 driver
        Revert "staging: nvec: ps2: change serio type to passthrough"
        drivers: staging: nvec: remove bogus reset command for PS/2 interface
        staging: greybus: arche-platform: fix device reference leak
        staging: comedi: ni_tio: fix buggy ni_tio_clock_period_ps() return value
        staging: sm750fb: Fix bugs introduced by early commits
        iio: hid-sensors: Increase the precision of scale to fix wrong reading interpretation.
        iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver)
        iio: st_sensors: fix scale configuration for h3lis331dl
        staging: iio: ad5933: avoid uninitialized variable in error case
      85b9df7a
    • Linus Torvalds's avatar
      Merge tag 'usb-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb · befdfffd
      Linus Torvalds authored
      Pull USB / PHY fixes from Greg KH:
       "Here are a number of small USB and PHY driver fixes for 4.9-rc5
      
        Nothing major, just small fixes for reported issues, all of these have
        been in linux-next for a while with no reported issues"
      
      * tag 'usb-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
        USB: cdc-acm: fix TIOCMIWAIT
        cdc-acm: fix uninitialized variable
        drivers/usb: Skip auto handoff for TI and RENESAS usb controllers
        usb: musb: remove duplicated actions
        usb: musb: da8xx: Don't print phy error on -EPROBE_DEFER
        phy: sun4i: check PMU presence when poking unknown bit of pmu
        phy-rockchip-pcie: remove deassert of phy_rst from exit callback
        phy: da8xx-usb: rename the ohci device to ohci-da8xx
        phy: Add reset callback for not generic phy
        uwb: fix device reference leaks
        usb: gadget: u_ether: remove interrupt throttling
        usb: dwc3: st: add missing <linux/pinctrl/consumer.h> include
        usb: dwc3: Fix error handling for core init
      befdfffd
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.dk/linux-block · 348ce85b
      Linus Torvalds authored
      Pull more block fixes from Jens Axboe:
       "Since I mistakenly left out the lightnvm regression fix yesterday and
        the aoeblk seems adequately tested at this point, might as well send
        out another pull to make -rc5"
      
      * 'for-linus' of git://git.kernel.dk/linux-block:
        aoe: fix crash in page count manipulation
        lightnvm: invalid offset calculation for lba_shift
      348ce85b
    • Linus Torvalds's avatar
      Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi · 980221d1
      Linus Torvalds authored
      Pull SCSI fixes from James Bottomley:
       "The megaraid_sas patch in here fixes a major regression in the last
        fix set that made all megaraid_sas cards unusable. It turns out no-one
        had actually tested such an "obvious" fix, sigh. The fix for the fix
        has been tested ...
      
        The next most serious is the vmw_pvscsi abort problem which basically
        means that aborts don't work on the vmware paravirt devices and error
        handling always escalates to reset.
      
        The rest are an assortment of missed reference counting in certain
        paths and corner case bugs that show up on some architectures"
      
      * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
        scsi: megaraid_sas: fix macro MEGASAS_IS_LOGICAL to avoid regression
        scsi: qla2xxx: fix invalid DMA access after command aborts in PCI device remove
        scsi: qla2xxx: do not queue commands when unloading
        scsi: libcxgbi: fix incorrect DDP resource cleanup
        scsi: qla2xxx: Fix scsi scan hang triggered if adapter fails during init
        scsi: scsi_dh_alua: Fix a reference counting bug
        scsi: vmw_pvscsi: return SUCCESS for successful command aborts
        scsi: mpt3sas: Fix for block device of raid exists even after deleting raid disk
        scsi: scsi_dh_alua: fix missing kref_put() in alua_rtpg_work()
      980221d1
    • Linus Torvalds's avatar
      Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux · d41bd8f3
      Linus Torvalds authored
      Pull clk fixes from Stephen Boyd:
       "The typical collection of minor bug fixes in clk drivers. We don't
        have anything in the core framework here, just driver fixes.
      
        There's a boot fix for Samsung devices and a safety measure for qoriq
        to prevent CPUs from running too fast. There's also a fix for i.MX6Q
        to properly handle audio clock rates. We also have some "that's
        obviously wrong" fixes like bad NULL pointer checks in the MPP driver
        and a poor usage of __pa in the xgene clk driver that are fixed here"
      
      * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
        clk: mmp: pxa910: fix return value check in pxa910_clk_init()
        clk: mmp: pxa168: fix return value check in pxa168_clk_init()
        clk: mmp: mmp2: fix return value check in mmp2_clk_init()
        clk: qoriq: Don't allow CPU clocks higher than starting value
        clk: imx: fix integer overflow in AV PLL round rate
        clk: xgene: Don't call __pa on ioremaped address
        clk/samsung: Use CLK_OF_DECLARE_DRIVER initialization method for CLKOUT
        clk: rockchip: don't return NULL when failing to register ddrclk branch
      d41bd8f3
    • Mauro Carvalho Chehab's avatar
      gp8psk: Fix DVB frontend attach · 7a0786c1
      Mauro Carvalho Chehab authored
      The DVB binding schema at the DVB core assumes that the frontend is a
      separate driver.  Faling to do that causes OOPS when the module is
      removed, as it tries to do a symbol_put_addr on an internal symbol,
      causing craches like:
      
          WARNING: CPU: 1 PID: 28102 at kernel/module.c:1108 module_put+0x57/0x70
          Modules linked in: dvb_usb_gp8psk(-) dvb_usb dvb_core nvidia_drm(PO) nvidia_modeset(PO) snd_hda_codec_hdmi snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd soundcore nvidia(PO) [last unloaded: rc_core]
          CPU: 1 PID: 28102 Comm: rmmod Tainted: P        WC O 4.8.4-build.1 #1
          Hardware name: MSI MS-7309/MS-7309, BIOS V1.12 02/23/2009
          Call Trace:
             dump_stack+0x44/0x64
             __warn+0xfa/0x120
             module_put+0x57/0x70
             module_put+0x57/0x70
             warn_slowpath_null+0x23/0x30
             module_put+0x57/0x70
             gp8psk_fe_set_frontend+0x460/0x460 [dvb_usb_gp8psk]
             symbol_put_addr+0x27/0x50
             dvb_usb_adapter_frontend_exit+0x3a/0x70 [dvb_usb]
      
      From Derek's tests:
          "Attach bug is fixed, tuning works, module unloads without
           crashing. Everything seems ok!"
      Reported-by: default avatarDerek <user.vdr@gmail.com>
      Tested-by: default avatarDerek <user.vdr@gmail.com>
      Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@s-opensource.com>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      7a0786c1
    • Mauro Carvalho Chehab's avatar
      gp8psk: fix gp8psk_usb_in_op() logic · 1596c387
      Mauro Carvalho Chehab authored
      Commit bc29131ecb10 ("[media] gp8psk: don't do DMA on stack") fixed the
      usage of DMA on stack, but the memcpy was wrong for gp8psk_usb_in_op().
      Fix it.
      
      From Derek's email:
          "Fix confirmed using 2 different Skywalker models with
           HD mpeg4, SD mpeg2."
      Suggested-by: default avatarJohannes Stezenbach <js@linuxtv.org>
      Fixes: bc29131ecb10 ("[media] gp8psk: don't do DMA on stack")
      Tested-by: default avatarDerek <user.vdr@gmail.com>
      Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@s-opensource.com>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      1596c387