- 15 Mar, 2022 27 commits
-
-
Julia Lawall authored
Various spelling mistakes in comments. Detected with the help of Coccinelle. Link: https://lore.kernel.org/r/20220314115354.144023-18-Julia.Lawall@inria.frSigned-off-by:
Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Julia Lawall authored
Various spelling mistakes in comments. Detected with the help of Coccinelle. Link: https://lore.kernel.org/r/20220314115354.144023-3-Julia.Lawall@inria.frSigned-off-by:
-
Nilesh Javali authored
Link: https://lore.kernel.org/r/20220310092604.22950-14-njavali@marvell.comReviewed-by:
Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by:
Nilesh Javali <njavali@marvell.com> Signed-off-by:
-
Shreyas Deodhar authored
Increase max limit of ql2xnvme_queues to (max_qpair - 1). Link: https://lore.kernel.org/r/20220310092604.22950-13-njavali@marvell.com Fixes: 65120de2 ("scsi: qla2xxx: Add ql2xnvme_queues module param to configure number of NVMe queues") Cc: stable@vger.kernel.org Reviewed-by:
Shreyas Deodhar <sdeodhar@marvell.com> Signed-off-by:
-
Manish Rangankar authored
During SNS Register FC-4 Features (RFF_ID) the initiator driver was sending incorrect type field for NVMe supported device. Use correct feature type field. Link: https://lore.kernel.org/r/20220310092604.22950-12-njavali@marvell.com Fixes: e374f9f5 ("scsi: qla2xxx: Migrate switch registration commands away from mailbox interface") Cc: stable@vger.kernel.org Reviewed-by:
Manish Rangankar <mrangankar@marvell.com> Signed-off-by:
-
Quinn Tran authored
Remove stale recovery code that prevents normal path recovery. Link: https://lore.kernel.org/r/20220310092604.22950-11-njavali@marvell.com Fixes: 1cbc0efc ("scsi: qla2xxx: Fix retry for PRLI RJT with reason of BUSY") Cc: stable@vger.kernel.org Reviewed-by:
Quinn Tran <qutran@marvell.com> Signed-off-by:
-
Quinn Tran authored
While a session is in the middle of a relogin, a late RSCN can be delivered from switch. RSCN trigger fabric scan where the scan logic can trigger another session login while a login is in progress. Reduce the extra trigger to prevent multiple logins to the same session. Link: https://lore.kernel.org/r/20220310092604.22950-10-njavali@marvell.com Fixes: bee8b846 ("scsi: qla2xxx: Reduce redundant ADISC command for RSCNs") Cc: stable@vger.kernel.org Reviewed-by:
-
Quinn Tran authored
For session recovery, driver relies on the dpc thread to initiate certain operations. The dpc thread runs exclusively without the Mailbox interface being occupied. A recent code change for heartbeat check via mailbox cmd 0 is preventing the dpc thread from carrying out its operation. This patch allows the higher priority error recovery to run first before running the lower priority heartbeat check. Link: https://lore.kernel.org/r/20220310092604.22950-9-njavali@marvell.com Fixes: d94d8158 ("scsi: qla2xxx: Add heartbeat check") Cc: stable@vger.kernel.org Reviewed-by:
-
Quinn Tran authored
User experienced device lost. The log shows Get port data base command was queued up, failed, and requeued again. Every time it is requeued, it set the FCF_ASYNC_ACTIVE. This prevents any recovery code from occurring because driver thinks a recovery is in progress for this session. In essence, this session is hung. The reason it gets into this place is the session deletion got in front of this call due to link perturbation. Break the requeue cycle and exit. The session deletion code will trigger a session relogin. Link: https://lore.kernel.org/r/20220310092604.22950-8-njavali@marvell.com Fixes: 726b8548 ("qla2xxx: Add framework for async fabric discovery") Cc: stable@vger.kernel.org Reviewed-by:
-
Quinn Tran authored
For N2N topology, ELS Passthrough is used to send PLOGI. On failure of ELS pass through PLOGI, driver flipped over to using LLIOCB PLOGI for N2N. This is not consistent. Delete the session to restart the connection where ELS pass through PLOGI would be used consistently. Link: https://lore.kernel.org/r/20220310092604.22950-7-njavali@marvell.com Fixes: c76ae845 ("scsi: qla2xxx: Add error handling for PLOGI ELS passthrough") Cc: stable@vger.kernel.org Reviewed-by:
-
Arun Easi authored
During purex packet handling the driver was incorrectly freeing a pre-allocated structure. Fix this by skipping that entry. System crashed with the following stack during a module unload test. Call Trace: sbitmap_init_node+0x7f/0x1e0 sbitmap_queue_init_node+0x24/0x150 blk_mq_init_bitmaps+0x3d/0xa0 blk_mq_init_tags+0x68/0x90 blk_mq_alloc_map_and_rqs+0x44/0x120 blk_mq_alloc_set_map_and_rqs+0x63/0x150 blk_mq_alloc_tag_set+0x11b/0x230 scsi_add_host_with_dma.cold+0x3f/0x245 qla2x00_probe_one+0xd5a/0x1b80 [qla2xxx] Call Trace with slub_debug and debug kernel: kasan_report_invalid_free+0x50/0x80 __kasan_slab_free+0x137/0x150 slab_free_freelist_hook+0xc6/0x190 kfree+0xe8/0x2e0 qla2x00_free_device+0x3bb/0x5d0 [qla2xxx] qla2x00_remove_one+0x668/0xcf0 [qla2xxx] Link: https://lore.kernel.org/r/20220310092604.22950-6-njavali@marvell.com Fixes: 62e9dd17 ("scsi: qla2xxx: Change in PUREX to handle FPIN ELS requests") Cc: stable@vger.kernel.org Reported-by:
Marco Patalano <mpatalan@redhat.com> Tested-by:
Arun Easi <aeasi@marvell.com> Signed-off-by:
-
Arun Easi authored
At NVMe ELS request time, request structure is DMA mapped and never unmapped. Fix this by calling the unmap on ELS completion. Link: https://lore.kernel.org/r/20220310092604.22950-5-njavali@marvell.com Fixes: e84067d7 ("scsi: qla2xxx: Add FC-NVMe F/W initialization and transport registration") Cc: stable@vger.kernel.org Reviewed-by:
-
Arun Easi authored
Driver registration of localport can race when it happens at the remote port discovery time. Fix this by calling the registration under a mutex. Link: https://lore.kernel.org/r/20220310092604.22950-4-njavali@marvell.com Fixes: e84067d7 ("scsi: qla2xxx: Add FC-NVMe F/W initialization and transport registration") Cc: stable@vger.kernel.org Reported-by:
-
Quinn Tran authored
User experienced some of the LUN failed to get rediscovered after long cable pull test. The issue is triggered by a race condition between driver setting session online state vs starting the LUN scan process at the same time. Current code set the online state after notifying the session is available. In this case, trigger to start the LUN scan process happened before driver could set the session in online state. LUN scan ends up with failure due to the session online check was failing. Set the online state before reporting of the availability of the session. Link: https://lore.kernel.org/r/20220310092604.22950-3-njavali@marvell.com Fixes: aecf0434 ("scsi: qla2xxx: Fix Remote port registration") Cc: stable@vger.kernel.org Reviewed-by:
-
Quinn Tran authored
User experienced no task management error while target device is responding with error. The RSP_CODE field in the status IOCB is in little endian. Driver assumes it's big endian and it picked up erroneous data. Convert the data back to big endian as is on the wire. Link: https://lore.kernel.org/r/20220310092604.22950-2-njavali@marvell.com Fixes: faef62d1 ("[SCSI] qla2xxx: Fix Task Management command asynchronous handling") Cc: stable@vger.kernel.org Reviewed-by:
-
Wenchao Hao authored
Commit 1b8d0300 ("scsi: libiscsi: Fix UAF in iscsi_conn_get_param()/iscsi_conn_teardown()") fixed an UAF in iscsi_conn_get_param() and introduced 2 tmp_xxx varibles. We can gracefully fix this UAF with the help of device_del(). Calling iscsi_remove_conn() at the beginning of iscsi_conn_teardown would make userspace unable to see iscsi_cls_conn. This way we we can free memory safely. Remove iscsi_destroy_conn() since it is no longer used. Link: https://lore.kernel.org/r/20220310015759.3296841-4-haowenchao@huawei.comReviewed-by:
Mike Christie <michael.christie@oracle.com> Signed-off-by:
Wenchao Hao <haowenchao@huawei.com> Signed-off-by:
Wu Bo <wubo40@huawei.com> Signed-off-by:
-
Wenchao Hao authored
iscsi_create_conn() exposed iscsi_cls_conn to sysfs prior to initialization of iscsi_conn's dd_data. When userspace tried to access an attribute such as the connect address, a NULL pointer dereference was observed. Do not add iscsi_cls_conn to sysfs until it has been initialized. Remove iscsi_create_conn() since it is no longer used. Link: https://lore.kernel.org/r/20220310015759.3296841-3-haowenchao@huawei.comReviewed-by:
-
Wenchao Hao authored
- iscsi_alloc_conn(): Allocate and initialize iscsi_cls_conn - iscsi_add_conn(): Expose iscsi_cls_conn to userspace via sysfs - iscsi_remove_conn(): Remove iscsi_cls_conn from sysfs Link: https://lore.kernel.org/r/20220310015759.3296841-2-haowenchao@huawei.comReviewed-by:
-
Yang Li authored
The smatch tool reported the following warning: drivers/scsi/scsi_error.c:1988 scsi_decide_disposition() warn: ignoring unreachable code. Remove the "default:return FAILED;" instead of "return FAILED;" reported by smatch, because compilers can provide more useful diagnostics about switch/case statements that do not have a default statement, especially if the "switch" applies to a value with enumeration type. Link: https://lore.kernel.org/r/20220301080448.112813-1-yang.lee@linux.alibaba.comReported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Signed-off-by:
-
Yang Li authored
Eliminate the following smatch warning: drivers/scsi/megaraid/megaraid_sas_fusion.c:5104 megasas_reset_fusion() warn: inconsistent indenting Link: https://lore.kernel.org/r/20220225011605.130927-1-yang.lee@linux.alibaba.comReported-by:
-
Jiapeng Chong authored
Eliminate the following smatch warning: drivers/scsi/aacraid/linit.c:867 aac_eh_tmf_hard_reset_fib() warn: inconsistent indenting. Link: https://lore.kernel.org/r/20220309005031.126504-1-jiapeng.chong@linux.alibaba.comReported-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
Mingzhe Zou authored
The RX/TX threads for iSCSI connection can be scheduled to any online CPUs, and will not be rescheduled. When binding other heavy load threads along with iSCSI connection RX/TX thread to the same CPU, the iSCSI performance will be worse. Add iscsi/cpus_allowed_list in configfs. The available CPU set of iSCSI connection RX/TX threads is allowed_cpus & online_cpus. If it is modified, all RX/TX threads will be rescheduled. Link: https://lore.kernel.org/r/20220301075500.14266-1-mingzhe.zou@easystack.cnReviewed-by:
Mingzhe Zou <mingzhe.zou@easystack.cn> Signed-off-by:
-
John Garry authored
Use the common libsas internal abort functionality. In addition, this driver has special handling for internal abort timeouts - specifically whether to reset the controller in that instance, so extend the API for that. Timeout is now increased to 20 * Hz from 6 * Hz. We also retry for failure now, but this should not make a difference. Link: https://lore.kernel.org/r/1647001432-239276-5-git-send-email-john.garry@huawei.comTested-by:
Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by:
Jack Wang <jinpu.wang@ionos.com> Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
John Garry authored
New special handling is added for SAS_PROTOCOL_INTERNAL_ABORT proto so that we may use the common queue command API. Link: https://lore.kernel.org/r/1647001432-239276-4-git-send-email-john.garry@huawei.comTested-by:
-
John Garry authored
Add support for a "device" variant of internal abort, which will abort all pending I/Os for a specific device. Link: https://lore.kernel.org/r/1647001432-239276-3-git-send-email-john.garry@huawei.comTested-by:
-
John Garry authored
The internal abort feature is common to hisi_sas and pm8001 HBAs, and the driver support is similar also, so add a common handler. Two modes of operation will be supported: - single: Abort a single tagged command - device: Abort all commands associated with a specific domain device A new protocol is added, SAS_PROTOCOL_INTERNAL_ABORT, so the common queue command API may be re-used. Only add "single" support as a first step. Link: https://lore.kernel.org/r/1647001432-239276-2-git-send-email-john.garry@huawei.comTested-by:
-
James Smart authored
The soft_wwpn/soft_wwn functionality, which allows the driver to modify service parameters in an attempt to override the adapter-assigned WWN, was originally attempted to be removed roughly 6 yrs ago as new fabric features were being introduced that clashed with the implementation. In the end, the feature was left in with the user being responsible if things went south. We've reached a point where soft_wwn is no longer functional and is failing in almost all production use cases. Use of Fabric features such as Fabric Assigned WWPN and Automatic DPORT is now prevalent and the features require coordination between the adapter and driver that can't be solved by the simplistic update of the service parameters. As it is no longer functional, the feature is to be removed. There are still ways to override the adapter-assigned WWN but they require the admin to invoke bios/efi level menus. Link: https://lore.kernel.org/r/20220310154845.11125-1-jsmart2021@gmail.comReviewed-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
-
- 09 Mar, 2022 7 commits
-
-
Peter Wang authored
When ufs initializes without scmd->device->sector_size set, scsi_get_lba() will get a wrong shift number and trigger an ubsan error. The shift exponent 4294967286 is too large for the 64-bit type 'sector_t' (aka 'unsigned long long'). Call scsi_get_lba() only when opcode is READ_10/WRITE_10/UNMAP. Link: https://lore.kernel.org/r/20220307111752.10465-1-peter.wang@mediatek.comReviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Peter Wang <peter.wang@mediatek.com> Signed-off-by:
-
Randy Dunlap authored
Make a variety of corrections to ufs.rst: - add spaces around parenthetical phrases - correct singular/plural grammar and nouns - correct punctuation - add article adjectives - add hyphens to multi-word adjectives - spell Lun as LUN - spell upiu as UPIU (in text, not code examples) - don't capitalize generic "specification" Link: https://lore.kernel.org/r/20220307013224.5130-1-rdunlap@infradead.org Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Avri Altman <avri.altman@wdc.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Sreekanth Reddy authored
The driver must perform its 4GB boundary check using the pool's DMA address instead of using the virtual address. Link: https://lore.kernel.org/r/20220303140230.13098-1-sreekanth.reddy@broadcom.com Fixes: d6adc251 ("scsi: mpt3sas: Force PCIe scatterlist allocations to be within same 4 GB region") Signed-off-by:
Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by:
-
Sreekanth Reddy authored
When scsi_dma_map() fails by returning a sges_left value less than zero, the amount of logging produced can be extremely high. In a recent end-user environment, 1200 messages per second were being sent to the log buffer. This eventually overwhelmed the system and it stalled. These error messages are not needed. Remove them. Link: https://lore.kernel.org/r/20220303140203.12642-1-sreekanth.reddy@broadcom.comSuggested-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Jianglei Nie authored
fc_exch_release(ep) will decrease the ep's reference count. When the reference count reaches zero, it is freed. But ep is still used in the following code, which will lead to a use after free. Return after the fc_exch_release() call to avoid use after free. Link: https://lore.kernel.org/r/20220303015115.459778-1-niejianglei2021@163.comReviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
Jianglei Nie <niejianglei2021@163.com> Signed-off-by:
-
Damien Le Moal authored
The use of the 'locked' boolean variable to control locking and unlocking of the qc_lock spinlock of struct sdebug_queue confuses sparse, leading to a warning about an unexpected unlock. Simplify the qc_lock lock/unlock handling code of this function to avoid this warning by removing the 'locked' boolean variable. This change also fixes unlocked access to the in_use_bm bitmap with the find_first_bit() function. Link: https://lore.kernel.org/r/20220301113009.595857-3-damien.lemoal@opensource.wdc.com Fixes: b05d4e48 ("scsi: scsi_debug: Refine sdebug_blk_mq_poll()") Cc: stable@vger.kernel.org Signed-off-by:
-
Damien Le Moal authored
The return statement inside the sdeb_read_lock(), sdeb_read_unlock(), sdeb_write_lock() and sdeb_write_unlock() confuse sparse, leading to many warnings about unexpected unlocks in the resp_xxx() functions. Modify the lock/unlock functions using the __acquire() and __release() inline annotations for the sdebug_no_rwlock == true case to avoid these warnings. Link: https://lore.kernel.org/r/20220301113009.595857-2-damien.lemoal@opensource.wdc.comAcked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
-
- 02 Mar, 2022 6 commits
-
-
Adrian Hunter authored
Kernel messages produced during runtime PM can cause a never-ending cycle because user space utilities (e.g. journald or rsyslog) write the messages back to storage, causing runtime resume, more messages, and so on. Messages that tell of things that are expected to happen, are arguably unnecessary, so suppress them. UFS driver messages are changes to from dev_err() to dev_dbg() which means they will not display unless activated by dynamic debug of building with -DDEBUG. sdev->silence_suspend is set to skip messages from sd_suspend_common() "Synchronizing SCSI cache", "Stopping disk" and scsi_report_sense() "Power-on or device reset occurred" message (Note, that message appears when the LUN is accessed after runtime PM, not during runtime PM) Example messages from Ubuntu 21.10: $ dmesg | tail [ 1620.380071] ufshcd 0000:00:12.5: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0 [ 1620.408825] ufshcd 0000:00:12.5: ufshcd_print_pwr_info:[RX, TX]: gear=[4, 4], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2 [ 1620.409020] ufshcd 0000:00:12.5: ufshcd_find_max_sup_active_icc_level: Regulator capability was not set, actvIccLevel=0 [ 1620.409524] sd 0:0:0:0: Power-on or device reset occurred [ 1622.938794] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1622.939184] ufs_device_wlun 0:0:0:49488: Power-on or device reset occurred [ 1625.183175] ufshcd 0000:00:12.5: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0 [ 1625.208041] ufshcd 0000:00:12.5: ufshcd_print_pwr_info:[RX, TX]: gear=[4, 4], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2 [ 1625.208311] ufshcd 0000:00:12.5: ufshcd_find_max_sup_active_icc_level: Regulator capability was not set, actvIccLevel=0 [ 1625.209035] sd 0:0:0:0: Power-on or device reset occurred Note for stable: depends on patch "scsi: core: sd: Add silence_suspend flag to suppress some PM messages". Link: https://lore.kernel.org/r/20220228113652.970857-3-adrian.hunter@intel.com Cc: stable@vger.kernel.org Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
-
Adrian Hunter authored
Kernel messages produced during runtime PM can cause a never-ending cycle because user space utilities (e.g. journald or rsyslog) write the messages back to storage, causing runtime resume, more messages, and so on. Messages that tell of things that are expected to happen are arguably unnecessary, so add a flag to suppress them. This flag is used by the UFS driver. Link: https://lore.kernel.org/r/20220228113652.970857-2-adrian.hunter@intel.com Cc: stable@vger.kernel.org Signed-off-by:
-
Hannes Reinecke authored
We only need the rport structure for lpfc_chk_tgt_mapped(). Link: https://lore.kernel.org/r/20220301143718.40913-6-hare@suse.de Cc: James Smart <james.smart@broadcom.com> Reviewed-by:
-
Hannes Reinecke authored
Instead of passing in a scsi_cmnd we should be using the rport; we already have the target and LUN ID as parameters, so there's no need to pass the scsi_cmnd too. Link: https://lore.kernel.org/r/20220301143718.40913-5-hare@suse.de Cc: James Smart <james.smart@broadcom.com> Reviewed-by:
-
Hannes Reinecke authored
Use fc_block_rport() instead of fc_block_scsi_eh() as the SCSI command will be removed as argument for SCSI EH functions. Link: https://lore.kernel.org/r/20220301143718.40913-4-hare@suse.de Cc: James Smart <james.smart@broadcom.com> Reviewed-by:
-
Hannes Reinecke authored
The default SCSI EH action for a non-existing EH callback is to return FAILED, so having a callback just returning FAILED is pointless. Link: https://lore.kernel.org/r/20220301143718.40913-3-hare@suse.de Cc: James Smart <james.smart@broadcom.com> Reviewed-by:
-
