- 08 Aug, 2016 13 commits
-
-
Daniel Borkmann authored
When having skbs on ingress with CHECKSUM_COMPLETE, tc BPF programs don't push rcsum of mac header back in and after BPF run back pull out again as opposed to some other subsystems (ovs, for example). For cases like q-in-q, meaning when a vlan tag for offloading is already present and we're about to push another one, then skb_vlan_push() pushes the inner one into the skb, increasing mac header and skb_postpush_rcsum()'ing the 4 bytes vlan header diff. Likewise, for the reverse operation in skb_vlan_pop() for the case where vlan header needs to be pulled out of the skb, we're decreasing the mac header and skb_postpull_rcsum()'ing the 4 bytes rcsum of the vlan header that was removed. However mangling the rcsum here will lead to hw csum failure for BPF case, since we're pulling or pushing data that was not part of the current rcsum. Changing tc BPF programs in general to push/pull rcsum around BPF_PROG_RUN() is also not really an option since current behaviour is ABI by now, but apart from that would also mean to do quite a bit of useless work in the sense that usually 12 bytes need to be rcsum pushed/pulled also when we don't need to touch this vlan related corner case. One way to fix it would be to push the necessary rcsum fixup down into vlan helpers that are (mostly) slow-path anyway. Fixes: 4e10df9a ("bpf: introduce bpf_skb_vlan_push/pop() helpers") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
bpf_skb_store_bytes() invocations above L2 header need BPF_F_RECOMPUTE_CSUM flag for updates, so that CHECKSUM_COMPLETE will be fixed up along the way. Where we ran into an issue with bpf_skb_store_bytes() is when we did a single-byte update on the IPv6 hoplimit despite using BPF_F_RECOMPUTE_CSUM flag; simple ping via ICMPv6 triggered a hw csum failure as a result. The underlying issue has been tracked down to a buffer alignment issue. Meaning, that csum_partial() computations via skb_postpull_rcsum() and skb_postpush_rcsum() pair invoked had a wrong result since they operated on an odd address for the hoplimit, while other computations were done on an even address. This mix doesn't work as-is with skb_postpull_rcsum(), skb_postpush_rcsum() pair as it always expects at least half-word alignment of input buffers, which is normally the case. Thus, instead of these helpers using csum_sub() and (implicitly) csum_add(), we need to use csum_block_sub(), csum_block_add(), respectively. For unaligned offsets, they rotate the sum to align it to a half-word boundary again, otherwise they work the same as csum_sub() and csum_add(). Adding __skb_postpull_rcsum(), __skb_postpush_rcsum() variants that take the offset as an input and adapting bpf_skb_store_bytes() to them fixes the hw csum failures again. The skb_postpull_rcsum(), skb_postpush_rcsum() helpers use a 0 constant for offset so that the compiler optimizes the offset & 1 test away and generates the same code as with csum_sub()/_add(). Fixes: 608cd71a ("tc: bpf: generalize pedit action") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
Follow-up to commit f8ffad69 ("bpf: add skb_postpush_rcsum and fix dev_forward_skb occasions") to fix an issue for dev_queue_xmit() redirect locations which need CHECKSUM_COMPLETE fixups on ingress. For the same reasons as described in f8ffad69 already, we of course also need this here, since dev_queue_xmit() on a veth device will let us end up in the dev_forward_skb() helper again to cross namespaces. Latter then calls into skb_postpull_rcsum() to pull out L2 header, so that netif_rx_internal() sees CHECKSUM_COMPLETE as it is expected. That is, CHECKSUM_COMPLETE on ingress covering L2 _payload_, not L2 headers. Also here we have to address bpf_redirect() and bpf_clone_redirect(). Fixes: 3896d655 ("bpf: introduce bpf_clone_redirect() helper") Fixes: 27b29f63 ("bpf: add bpf_redirect() helper") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Paul Gortmaker authored
The call site for this function appears as: #ifdef DEBUG data->msg_enable = DEBUG; dump_eth_one(dev); #endif ...leading to the following warning for !DEBUG builds: drivers/net/ethernet/tundra/tsi108_eth.c:169:13: warning: 'dump_eth_one' defined but not used [-Wunused-function] static void dump_eth_one(struct net_device *dev) ^ ...when using the arch/powerpc/configs/mpc7448_hpc2_defconfig Put the function definition under the same #ifdef as the call site to avoid the warning. Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: DCB fixes Patches 1 and 2 fix a problem in which PAUSE frames settings are wrongly overridden when ieee_setpfc() gets called. Patch 3 adds a missing rollback in port's creation error path. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
We correctly execute mlxsw_sp_port_dcb_fini() when port is removed, but I missed its rollback in the error path of port creation, so add it. Fixes: f00817df ("mlxsw: spectrum: Introduce support for Data Center Bridging (DCB)") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
The PFCC register is used to configure both PAUSE and PFC frames. Therefore, when PFC frames are disabled we must make sure we don't mistakenly also disable PAUSE frames (which might be enabled). Fix this by packing the PFCC register with the current PAUSE settings. Note that this register is also accessed via ethtool ops, but there we are guaranteed to have PFC disabled. Fixes: d81a6bdb ("mlxsw: spectrum: Add IEEE 802.1Qbb PFC support") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
When ieee_setpfc() gets called, PAUSE frames are not necessarily disabled on the port. Check if PAUSE frames are disabled or enabled and configure the port's headroom buffer accordingly. Fixes: d81a6bdb ("mlxsw: spectrum: Add IEEE 802.1Qbb PFC support") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Phil Sutter authored
Looks like a simple copy'n'paste error. Fixes: 1aa661f5 ("rhashtable-test: Measure time to insert, remove & traverse entries") Signed-off-by:
Phil Sutter <phil@nwl.cc> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Phil Sutter says: ==================== sctp_diag: A bunch of fixes for upcoming 'ss' support The following series contains a number of fixes necessary to make my yet unpublished 'ss' support patch functional. Changes since v1: - Fixed patch 2/3 - Rebased whole series onto current net-next/master Changes since v2: - Improved description of patch 2/3 ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Phil Sutter authored
Since 'ss' always adds TCPF_CLOSE to idiag_states flags, sctp_diag can't rely upon TCPF_LISTEN flag solely being present when listening sockets are requested. Signed-off-by:
Phil Sutter <phil@nwl.cc> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Phil Sutter authored
The asoc's timer value is not kept in asoc->timeouts array but in it's primary transport instead. Furthermore, we must export the timer only if it is pending, otherwise the value will underrun when stored in an unsigned variable and user space will only see a very large timeout value. Signed-off-by:
Phil Sutter <phil@nwl.cc> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Phil Sutter authored
This is required to correctly interpret INET_DIAG_INFO messages exported by sctp_diag module. Signed-off-by:
Phil Sutter <phil@nwl.cc> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 07 Aug, 2016 4 commits
-
-
Harini Katakam authored
USRIO and JUMBO CAPS have the same mask. Fix the same. Fixes: ce721a70 ("net: ethernet: cadence-macb: Add disabled usrio caps") Cc: stable@vger.kernel.org # v4.5+ Signed-off-by:
Harini Katakam <harinik@xilinx.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'mac80211-for-davem-2016-08-05' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== First set of fixes for the current cycle: * fix 80+80 bandwidth warning * fix powersave with mac80211 TXQ implementation * use correct way to free SKBs from multicast buffering * mesh: fix operation ordering to work with all drivers * mesh: end service period even when peer goes away * mesh: correct HT opmode validity checks * pass hw pointer from mac80211 to driver in TPT method, fixing a bug (in a bit the wrong way, but that's what we have right now) ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexei Starovoitov authored
increase test coverage to check previously missing 'update when full' Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexei Starovoitov authored
The introduction of pre-allocated hash elements inadvertently broke the behavior of bpf hash maps where users expected to call bpf_map_update_elem() without considering that the map can be full. Some programs do: old_value = bpf_map_lookup_elem(map, key); if (old_value) { ... prepare new_value on stack ... bpf_map_update_elem(map, key, new_value); } Before pre-alloc the update() for existing element would work even in 'map full' condition. Restore this behavior. The above program could have updated old_value in place instead of update() which would be faster and most programs use that approach, but sometimes the values are large and the programs use update() helper to do atomic replacement of the element. Note we cannot simply update element's value in-place like percpu hash map does and have to allocate extra num_possible_cpu elements and use this extra reserve when the map is full. Fixes: 6c905981 ("bpf: pre-allocate hash map elements") Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 06 Aug, 2016 5 commits
-
-
Geert Uytterhoeven authored
On 32-bit (e.g. with m68k-linux-gnu-gcc-4.1): drivers/net/dsa/b53/b53_common.c: In function ‘b53_arl_read’: drivers/net/dsa/b53/b53_common.c:1072: warning: integer constant is too large for ‘long’ type Fixes: 1da6df85 ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David Forster authored
Panic occurs when issuing "cat /proc/net/route" whilst populating FIB with > 1M routes. Use of cached node pointer in fib_route_get_idx is unsafe. BUG: unable to handle kernel paging request at ffffc90001630024 IP: [<ffffffff814cf6a0>] leaf_walk_rcu+0x10/0xe0 PGD 11b08d067 PUD 11b08e067 PMD dac4b067 PTE 0 Oops: 0000 [#1] SMP Modules linked in: nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscac snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep virti acpi_cpufreq button parport_pc ppdev lp parport autofs4 ext4 crc16 mbcache jbd tio_ring virtio floppy uhci_hcd ehci_hcd usbcore usb_common libata scsi_mod CPU: 1 PID: 785 Comm: cat Not tainted 4.2.0-rc8+ #4 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 task: ffff8800da1c0bc0 ti: ffff88011a05c000 task.ti: ffff88011a05c000 RIP: 0010:[<ffffffff814cf6a0>] [<ffffffff814cf6a0>] leaf_walk_rcu+0x10/0xe0 RSP: 0018:ffff88011a05fda0 EFLAGS: 00010202 RAX: ffff8800d8a40c00 RBX: ffff8800da4af940 RCX: ffff88011a05ff20 RDX: ffffc90001630020 RSI: 0000000001013531 RDI: ffff8800da4af950 RBP: 0000000000000000 R08: ffff8800da1f9a00 R09: 0000000000000000 R10: ffff8800db45b7e4 R11: 0000000000000246 R12: ffff8800da4af950 R13: ffff8800d97a74c0 R14: 0000000000000000 R15: ffff8800d97a7480 FS: 00007fd3970e0700(0000) GS:ffff88011fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffffc90001630024 CR3: 000000011a7e4000 CR4: 00000000000006e0 Stack: ffffffff814d00d3 0000000000000000 ffff88011a05ff20 ffff8800da1f9a00 ffffffff811dd8b9 0000000000000800 0000000000020000 00007fd396f35000 ffffffff811f8714 0000000000003431 ffffffff8138dce0 0000000000000f80 Call Trace: [<ffffffff814d00d3>] ? fib_route_seq_start+0x93/0xc0 [<ffffffff811dd8b9>] ? seq_read+0x149/0x380 [<ffffffff811f8714>] ? fsnotify+0x3b4/0x500 [<ffffffff8138dce0>] ? process_echoes+0x70/0x70 [<ffffffff8121cfa7>] ? proc_reg_read+0x47/0x70 [<ffffffff811bb823>] ? __vfs_read+0x23/0xd0 [<ffffffff811bbd42>] ? rw_verify_area+0x52/0xf0 [<ffffffff811bbe61>] ? vfs_read+0x81/0x120 [<ffffffff811bcbc2>] ? SyS_read+0x42/0xa0 [<ffffffff81549ab2>] ? entry_SYSCALL_64_fastpath+0x16/0x75 Code: 48 85 c0 75 d8 f3 c3 31 c0 c3 f3 c3 66 66 66 66 66 66 2e 0f 1f 84 00 00 a 04 89 f0 33 02 44 89 c9 48 d3 e8 0f b6 4a 05 49 89 RIP [<ffffffff814cf6a0>] leaf_walk_rcu+0x10/0xe0 RSP <ffff88011a05fda0> CR2: ffffc90001630024 Signed-off-by:
Dave Forster <dforster@brocade.com> Acked-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David Howells authored
Inside the kafs filesystem it is possible to occasionally have a call processed and terminated before we've had a chance to check whether we need to clean up the rx queue for that call because afs_send_simple_reply() ends the call when it is done, but this is done in a workqueue item that might happen to run to completion before afs_deliver_to_call() completes. Further, it is possible for rxrpc_kernel_send_data() to be called to send a reply before the last request-phase data skb is released. The rxrpc skb destructor is where the ACK processing is done and the call state is advanced upon release of the last skb. ACK generation is also deferred to a work item because it's possible that the skb destructor is not called in a context where kernel_sendmsg() can be invoked. To this end, the following changes are made: (1) kernel_rxrpc_data_consumed() is added. This should be called whenever an skb is emptied so as to crank the ACK and call states. This does not release the skb, however. kernel_rxrpc_free_skb() must now be called to achieve that. These together replace rxrpc_kernel_data_delivered(). (2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed(). This makes afs_deliver_to_call() easier to work as the skb can simply be discarded unconditionally here without trying to work out what the return value of the ->deliver() function means. The ->deliver() functions can, via afs_data_complete(), afs_transfer_reply() and afs_extract_data() mark that an skb has been consumed (thereby cranking the state) without the need to conditionally free the skb to make sure the state is correct on an incoming call for when the call processor tries to send the reply. (3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it has finished with a packet and MSG_PEEK isn't set. (4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data(). Because of this, we no longer need to clear the destructor and put the call before we free the skb in cases where we don't want the ACK/call state to be cranked. (5) The ->deliver() call-type callbacks are made to return -EAGAIN rather than 0 if they expect more data (afs_extract_data() returns -EAGAIN to the delivery function already), and the caller is now responsible for producing an abort if that was the last packet. (6) There are many bits of unmarshalling code where: ret = afs_extract_data(call, skb, last, ...); switch (ret) { case 0: break; case -EAGAIN: return 0; default: return ret; } is to be found. As -EAGAIN can now be passed back to the caller, we now just return if ret < 0: ret = afs_extract_data(call, skb, last, ...); if (ret < 0) return ret; (7) Checks for trailing data and empty final data packets has been consolidated as afs_data_complete(). So: if (skb->len > 0) return -EBADMSG; if (!last) return 0; becomes: ret = afs_data_complete(call, skb, last); if (ret < 0) return ret; (8) afs_transfer_reply() now checks the amount of data it has against the amount of data desired and the amount of data in the skb and returns an error to induce an abort if we don't get exactly what we want. Without these changes, the following oops can occasionally be observed, particularly if some printks are inserted into the delivery path: general protection fault: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: kafsd afs_async_workfn [kafs] task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000 RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1 RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710 RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0 Stack: 0000000000000006 000000000be04930 0000000000000000 ffff880400000000 ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446 ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38 Call Trace: [<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74 [<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1 [<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189 [<ffffffff810915f4>] lock_acquire+0x122/0x1b6 [<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49 [<ffffffff814c928f>] ? skb_dequeue+0x18/0x61 [<ffffffff814c928f>] skb_dequeue+0x18/0x61 [<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs] [<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs] [<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs] [<ffffffff81063a3a>] process_one_work+0x29d/0x57c [<ffffffff81064ac2>] worker_thread+0x24a/0x385 [<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0 [<ffffffff810696f5>] kthread+0xf3/0xfb [<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40 [<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wei Yongjun authored
commit a94efbd7 ("ethernet: arc: emac_main: add missing of_node_put after calling of_parse_phandle") added missing of_node_put after calling of_parse_phandle, but missing the devm_ioremap_resource() error handling case. Signed-off-by:
Wei Yongjun <weiyj.lk@gmail.com> Reviewed-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ian Wienand authored
net_device->ndo_set_rx_headroom (introduced in 871b642a) says "Setting a negtaive value reset the rx headroom to the default value". It seems that the OVS implementation in 3a927bc7 overlooked this and sets dev->needed_headroom unconditionally. This doesn't have an immediate effect, but can mess up later LL_RESERVED_SPACE calculations, such as done in net/ipv6/mcast.c:mld_newpack. For reference, this issue was found from a skb_panic raised there after the length calculations had given the wrong result. Note the other current users of this interface (drivers/net/tun.c:tun_set_headroom and drivers/net/veth.c:veth_set_rx_headroom) are both checking this correctly thus need no modification. Thanks to Ben for some pointers from the crash dumps! Cc: Benjamin Poirier <bpoirier@suse.com> Cc: Paolo Abeni <pabeni@redhat.com> Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1361414Signed-off-by:
Ian Wienand <iwienand@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 05 Aug, 2016 4 commits
-
-
Maxim Altshul authored
The variable is added to allow the driver an easy access to it's own hw->priv when the op is invoked. This fixes a crash in wlcore because it was relying on a station pointer that wasn't initialized yet. It's the wrong way to fix the crash, but it solves the problem for now and it does make sense to have the hw pointer here. Signed-off-by:
Maxim Altshul <maxim.altshul@ti.com> [rewrite commit message, fix indentation] Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Masashi Honma authored
Previously, NL80211_MESHCONF_HT_OPMODE validation rejected correct flag combinations, e.g. IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED | IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT. Doing just a range-check allows setting flags that don't exist (0x8) and invalid flag combinations. Implements some checks based on IEEE 802.11 2012 8.4.2.59 "HT Operation element". Signed-off-by:
Masashi Honma <masashi.honma@gmail.com> [reword commit message, simplify a bit] Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Masashi Honma authored
If QoS frame with EOSP (end of service period) subfield=1 sent by local peer was not acked by remote peer, local peer did not end the MPSP. This prevents local peer from going to DOZE state. And if the remote peer goes away without closing connection, local peer continues AWAKE state and wastes battery. Signed-off-by:
Masashi Honma <masashi.honma@gmail.com> Acked-by:
Bob Copeland <me@bobcopeland.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Felix Fietkau authored
The code currently assumes that buffered multicast PS frames don't have a pending ACK frame for tx status reporting. However, hostapd sends a broadcast deauth frame on teardown for which tx status is requested. This can lead to the "Have pending ack frames" warning on module reload. Fix this by using ieee80211_free_txskb/ieee80211_purge_tx_queue. Cc: stable@vger.kernel.org Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
- 03 Aug, 2016 14 commits
-
-
David S. Miller authored
Manish Chopra says: ==================== qlcnic: bug fixes This series fixes a data structure corruption bug in VF's async mailbox commands handling and an issue realted to napi poll budget in the driver. Please consider applying this series to "net" ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Manish Chopra authored
Signed-off-by:
Manish Chopra <manish.chopra@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Manish Chopra authored
Driver modifies the supplied NAPI budget in qlcnic_83xx_msix_tx_poll() function. Instead, it should use the budget as it is. Signed-off-by:
Manish Chopra <manish.chopra@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Manish Chopra authored
This patch fixes a data structure corruption bug in the SRIOV VF mailbox handler code. While handling mailbox commands from the atomic context, driver is accessing and updating qlcnic_async_work_list_struct entry fields in the async work list. These fields could be concurrently accessed by the work function resulting in data corruption. This patch restructures async mbx command handling by using a separate async command list instead of using a list of work_struct structures. A single work_struct is used to schedule and handle the async commands with proper locking mechanism. Signed-off-by:
Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by:
Sony Chacko <sony.chacko@qlogic.com> Signed-off-by:
Manish Chopra <manish.chopra@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Siva Reddy Kallam says: ==================== tg3: Disallow 0 rx coalesce time and correctly report RSS queues in tg3_get_rxnfc First patch: Diasllow rx coalescing time to be 0 Second patch: Report the correct number of RSS queues through tg3_get_rxnfc ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Siva Reddy Kallam authored
This patch remove the wrong substraction from info->data in tg3_get_rxnfc function. Without this patch, the number of RSS queues reported is less by one. Reported-by:
Michal Soltys <soltys@ziu.info> Signed-off-by:
Siva Reddy Kallam <siva.kallam@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Satish Baddipadige authored
When the rx coalescing time is 0, interrupts are not generated from the controller and rx path hangs. To avoid this rx hang, updating the driver to not allow rx coalescing time to be 0. Signed-off-by:
Satish Baddipadige <satish.baddipadige@broadcom.com> Signed-off-by:
Siva Reddy Kallam <siva.kallam@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Using per-register incrementing ID can lead to find_good_pkt_pointers() confusing registers which have completely different values. Consider example: 0: (bf) r6 = r1 1: (61) r8 = *(u32 *)(r6 +76) 2: (61) r0 = *(u32 *)(r6 +80) 3: (bf) r7 = r8 4: (07) r8 += 32 5: (2d) if r8 > r0 goto pc+9 R0=pkt_end R1=ctx R6=ctx R7=pkt(id=0,off=0,r=32) R8=pkt(id=0,off=32,r=32) R10=fp 6: (bf) r8 = r7 7: (bf) r9 = r7 8: (71) r1 = *(u8 *)(r7 +0) 9: (0f) r8 += r1 10: (71) r1 = *(u8 *)(r7 +1) 11: (0f) r9 += r1 12: (07) r8 += 32 13: (2d) if r8 > r0 goto pc+1 R0=pkt_end R1=inv56 R6=ctx R7=pkt(id=0,off=0,r=32) R8=pkt(id=1,off=32,r=32) R9=pkt(id=1,off=0,r=32) R10=fp 14: (71) r1 = *(u8 *)(r9 +16) 15: (b7) r7 = 0 16: (bf) r0 = r7 17: (95) exit We need to get a UNKNOWN_VALUE with imm to force id generation so lines 0-5 make r7 a valid packet pointer. We then read two different bytes from the packet and add them to copies of the constructed packet pointer. r8 (line 9) and r9 (line 11) will get the same id of 1, independently. When either of them is validated (line 13) - find_good_pkt_pointers() will also mark the other as safe. This leads to access on line 14 being mistakenly considered safe. Fixes: 969bf05e ("bpf: direct packet access") Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
Building with -Wmaybe-uninitialized shows a potential use of an uninitialized variable: drivers/net/ethernet/apm/xgene/xgene_enet_hw.c: In function 'xgene_enet_phy_connect': drivers/net/ethernet/apm/xgene/xgene_enet_hw.c:802:23: warning: 'phy_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] Although the compiler correctly identified this based on the function, the current code is still safe as long dev->of_node is non-NULL for the case of CONFIG_ACPI=n, which is currently the case. The warning is now disabled by default, but still appears when building with W=1, and other build test tools should be able to detect it as well. Adding an #else clause here makes the code more robust and makes it clear to the compiler that this cannot happen. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 8089a96f ("drivers: net: xgene: Add backward compatibility") Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jarno Rajahalme authored
ovs_ct_find_existing() issues a warning if an existing conntrack entry classified as IP_CT_NEW is found, with the premise that this should not happen. However, a newly confirmed, non-expected conntrack entry remains IP_CT_NEW as long as no reply direction traffic is seen. This has resulted into somewhat confusing kernel log messages. This patch removes this check and warning. Fixes: 289f2253 ("openvswitch: Find existing conntrack entry after upcall.") Suggested-by:
Joe Stringer <joe@ovn.org> Signed-off-by:
Jarno Rajahalme <jarno@ovn.org> Acked-by:
Joe Stringer <joe@ovn.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: "A few updates and fixes: - move the suppressing of the __builtin_return_address >0 warning to the tracing directory only. - metag recordmcount fix for newer glibc's - two tracing histogram fixes that were reported by KASAN" * tag 'trace-v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix use-after-free in hist_register_trigger() tracing: Fix use-after-free in hist_unreg_all/hist_enable_unreg_all Makefile: Mute warning for __builtin_return_address(>0) for tracing only ftrace/recordmcount: Work around for addition of metag magic but not relocations
-
Geert Uytterhoeven authored
With gcc < 4.2 (e.g. 4.1.2): CC fs/proc/task_mmu.o cc1: error: unrecognized command line option "-Wno-override-init" To fix this, only enable the compiler option when it is actually supported by the compiler. Fixes: ca52953f ("fs/proc/task_mmu.c: suppress compilation warnings with W=1") Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
Valdis Kletnieks <valdis.kletnieks@vt.edu> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix several cases of missing of_node_put() calls in various networking drivers. From Peter Chen. 2) Don't try to remove unconfigured VLANs in qed driver, from Yuval Mintz. 3) Unbalanced locking in TIPC error handling, from Wei Yongjun. 4) Fix lockups in CPDMA driver, from Grygorii Strashko. 5) More MACSEC refcount et al fixes, from Sabrina Dubroca. 6) Fix MAC address setting in r8169 during runtime suspend, from Chun-Hao Lin. 7) Various printf format specifier fixes, from Heinrich Schuchardt. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (59 commits) qed: Fail driver load in 100g MSI mode. ethernet: ti: davinci_emac: add missing of_node_put after calling of_parse_phandle ethernet: stmicro: stmmac: add missing of_node_put after calling of_parse_phandle ethernet: stmicro: stmmac: dwmac-socfpga: add missing of_node_put after calling of_parse_phandle ethernet: renesas: sh_eth: add missing of_node_put after calling of_parse_phandle ethernet: renesas: ravb_main: add missing of_node_put after calling of_parse_phandle ethernet: marvell: pxa168_eth: add missing of_node_put after calling of_parse_phandle ethernet: marvell: mvpp2: add missing of_node_put after calling of_parse_phandle ethernet: marvell: mvneta: add missing of_node_put after calling of_parse_phandle ethernet: hisilicon: hns: hns_dsaf_main: add missing of_node_put after calling of_parse_phandle ethernet: hisilicon: hns: hns_dsaf_mac: add missing of_node_put after calling of_parse_phandle ethernet: cavium: octeon: add missing of_node_put after calling of_parse_phandle ethernet: aurora: nb8800: add missing of_node_put after calling of_parse_phandle ethernet: arc: emac_main: add missing of_node_put after calling of_parse_phandle ethernet: apm: xgene: add missing of_node_put after calling of_parse_phandle ethernet: altera: add missing of_node_put 8139too: fix system hang when there is a tx timeout event. qed: Fix error return code in qed_resc_alloc() net: qlcnic: avoid superfluous assignement dsa: b53: remove redundant if ...
-
Maital Hahn authored
Some drivers (e.g. wl18xx) expect that the last stage in the de-initialization process will be stopping the beacons, similar to AP flow. Update ieee80211_stop_mesh() flow accordingly. As peers can be removed dynamically, this would not impact other drivers. Tested also on Ralink RT3572 chipset. Signed-off-by:
Maital Hahn <maitalm@ti.com> Signed-off-by:
Yaniv Machani <yanivma@ti.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-